Philips CE138/51 Guide de démarrage rapide
- Catégorie
- Systèmes vidéo de voiture
- Taper
- Guide de démarrage rapide
EN
1 Safety
Read and understand all instructions before you use this device.
If damage is caused by failure to follow instructions, the warranty
does not apply.
radiation of EMC or other unsafe operation.
The device is designed for negative ground (earth) 12 V DC
operation only.
To ensure safe driving, adjust the volume to a safe and
comfortable level.
to change the fuse, consult a professional.
Use only the supplied mounting hardware for a safe and
secure installation.
To avoid short circuits, do not expose the device to rain or
water.
The device shall not be exposed to dripping or splashing.
Do not place any sources of danger on the device (e.g. liquid
Never insert objects into the ventilation slots or other
openings on the device.
Clean the device with soft, damp cloth. Never use
substances such as alcohol, chemicals or household cleaners
on the device.
2 Your car audio system
Congratulations on your purchase, and welcome to Philips! To fully
at www.philips.com/welcome.
Introduction
With this system, you can:
enjoy audio from a USB storage device, SD/SDHC card,
iPod/iPhone, and external player,
charge your iPod/iPhone, and
listen to radio stations.
You can enrich sound output with these sound effects:
Dynamic bass boost (DBB)
Digital sound control (DSC)
Playable media:
USB storage device
Compatibility: USB 2.0, USB 1.1
Class support: MSC (Mass Storage Class)
Maximum capacity: 32 G
SD/SDHC card
Maximum capacity: 32 G
Files
File system: FAT16, FAT32
Maximum number of folders: 99
Maximum level of directory: 8
Bitrates: 8-320 kbps and variable bitrates
ID3 tag V2.0 or later
What’s in the box
Check and identify the contents of the package:
ab c
fed
a Main unit (with a sleeve)
b Carrying case (with front panel included)
c Trim plate
d Disassembly tool X 2
e ISO male connector X 2
f User manual
3 Install the car audio
system
Caution
Use the controls only as stated in this user manual.
Always follow the instructions in this chapter in sequence.
These instructions are for a typical installation. However, if your
car has different requirements, make the adjustment accordingly.
If you have any question regarding installation kits, consult your
local retailer.
Note
This system is designed for negative ground (earth) 12V DC
operation only.
Always install this system in the car dashboard. Other
locations can be dangerous as the rear of the system heats
up during use.
To avoid short-circuit: before you connect, make sure that
the ignition is off.
Make sure that you connect the yellow and red power
supply leads after all other leads are connected.
Make sure that all loose leads are insulated with electrical
tape.
Make sure that the leads do not get caught under screws
iron parts that will move (e.g. seat rail).
Make sure that all ground (earth) leads are run to a common
ground (earth) point.
Use only the supplied mounting hardware for a safe and
secure installation.
change the fuse, consult a professional.
that the rating of the car circuit is higher than the total fuse
value of all the connected devices.
Never connect speaker wires to the metal body or chassis
of the car.
Never connect speaker wires with stripes to one another.
Connect wires
Note
Make sure that all loose leads are insulated with electrical
tape.
Consult a professional to connect wires as instructed below.
1 Check the car’s wiring carefully and connect them to the
the supplied ISO male connectors.
ISO male connectors Connect to
1 Green strip, black-edged
green strip
Rear left speaker
2
white strip
Front left speaker
3 Gray strip, black-edged gray
strip
Front right speaker
Purple strip, black-edged
purple strip
Rear right speaker
e Red strip Ignition key +12V DC when
ON/ACC
f Blue strip Motor/electric antenna relay
control lead
g Blue strip, white strip
hBlack strip Ground
i Yellow strip To the +12V car battery
2
applicable.
Sockets on rear panel External sockets or
connectors
1 For ISO male connectors As indicated above
2 REAR L Rear left speaker
3 REAR R Rear right speaker
ANTENNA Antenna
Tip
The pin arrangement for the ISO connectors depends
on the type of your vehicle. To avoid damage to the unit,
connect properly.
Mount into the dashboard
If the car does not have an on-board drive or navigation
computer, disconnect the negative terminal of the car
battery.
If the car battery is not disconnected, to avoid short-circuit,
make sure that the bare wires do not touch each other.
REAR
L
R
abcd
1 Make sure that the car dashboard opening is within these
measurements:
2 Remove the mounting sleeve with the supplied disassembly
tools.
3 Install the sleeve into the dashboard and bend the tabs
4 Slide the unit into the sleeve until you hear a “click”.
5 Attach the trim plate.
6 Reconnect the negative terminal of the car battery.
Attach the front panel
1 Insert the notch on the front panel to the chassis on the
main unit.
2 Press the left end of the front panel inwards until it is
securely locked with a “click”.
Detach the front panel
Note
Before you insert an SD/SDHC card or reset the system,
detach the front panel.
Before you detach the front panel, make sure that the
system is turned off.
1 Press to release the front panel.
2 Pull the front panel outwards to remove it.
183 mm
53mm
5mm
183 mm
53.5 mm
4 Get started
1 Press to turn on the system.
» [PHILIPS] is displayed and then [SELECT OPERATING
REGION] (select a radio region) scrolls.
2
to select a radio region that matches your location.
[AREA EUROPE]
[AREA ASIA]
[AREA MID--EAST] (Middle East)
[AREA AUST] (Australia)
[AREA RUSSIA] (Russia)
[AREA USA] (United States)
[AREA LATIN]
[AREA JAPAN] (Japan)
3 Press
» The system switches to radio mode automatically.
To turn off the system, press and hold until the
screen backlight is off.
Set the time format
1 Press and hold to access the system menu.
2 Press / repeatedly until [CLK 24H] or [CLK 12H]
is displayed.
3 Rotate to select [CLK 24H] or [CLK 12H].
[CLK 24H]
[CLK 12H]: 12-hour time format
Set the clock
1 Press and hold to access the system menu.
2 Press / repeatedly until [CLK] is displayed with time
digits blinking.
3 Rotate anti-clockwise to set the hour.
4 Rotate clockwise to set the minute.
Select a source
Press AS/SOURCE repeatedly to select a source.
[RADIO]
[MP3--LINK]MP3-
LINK socket.
[iPod/USB]
[SD/SDHC]
are stored on it.
5 Listen to radio
Select a tuner sensitivity
To search for radio stations with strong signals only or more radio
stations, you can change the tuner sensitivity.
1 Press and hold to access the system menu.
2 Press / repeatedly until [LOC ON] or [LOC OFF]
is displayed.
3 Rotate to select a setting.
[LOC ON]: Search for radio stations with strong signals
only.
[LOC OFF]: Search for radio stations with strong and
weak signals.
Enable the RDS function
Note
The RDS function is enabled by default.
Only when the RDS function is enabled, RDS related
settings can be accessed.
1 Press and hold to access the system menu.
2 Press / repeatedly until [RDS ON] or [RDS OFF]
is displayed.
3 Rotate to select [RDS ON].
» The RDS function is enabled.
To disable the RDS function, rotate to select
[RDS OFF].
Search for a radio station
Search for a radio station automatically
Press or to search for the previous or next radio station
with strong signals.
Search for a radio station manually
1 Press and hold or until [M] blinks.
2 Press or repeatedly until the target frequency is
displayed.
Store radio stations in memory
Note
You can store a maximum of six stations in each band.
Store radio stations automatically
1 Press AS/SOURCE repeatedly to switch the source to
[RADIO].
2 Press BAND, , or repeatedly to select a band.
3 Press and hold AS/SOURCE until [STORE---] is displayed.
»
is broadcast automatically.
To select a stored radio station, press , ,
, , , or .
Store radio stations manually
1 Press BAND, , or repeatedly to select a tuner band.
2 Tune to the radio station that you want to store.
3 Press and hold , , , , , or
to store the radio station at the selected channel.
6 Play from a storage device
1 Connect a compatible USB storage device or SD/SDHC
card.
insert the card into the card slot, and then attach the
front panel.
2 Press AS/SOURCE repeatedly to switch the source to
[iPod/USB] or [SD/SDHC].
[iPod/
USB] automatically.
3 If the play does not start, press .
Control play
Button Function
/
Press repeatedly to select a folder.
Pause or resume play.
/
Press to play the previous or next track.
/
Press and hold to rewind a track or search forward
fast.
/DISP
Press repeatedly to display available information
about the current track.
Press repeatedly to select a repeat mode:
[REP ONE]: repeat the current track,
[RPT FLD]: repeat all tracks in the current
folder, or
[RPT ALL]: repeat all tracks in the storage
device.
Press repeatedly to select a play mode:
[SHU ALL]: play all tracks randomly,
[SHU FLD]: play tracks in the current folder
randomly, or
[SHU OFF]: play all tracks in the storage
device in sequence.
Switch tracks
During play, you can switch tracks or folders quickly.
Switch tracks directly
1 Press to access the track list.
»
2 Rotate to toggle through tracks.
3 Press to play the selected track.
Switch folders for a track
1 Press to access the folder list.
» The name of current folder scrolls.
2 Rotate to toggle through folders.
3 Press to select the folder.
»
7 Play from an iPod/iPhone
Note
During play, no audio signals are transferred through the
headphone socket of your iPod/iPhone.
Compatible iPod/iPhone models
This car audio system supports the following iPod and iPhone
models.
iPod classic
Connect your iPod/iPhone
Connect an Apple 30-pin USB cable to:
the USB socket on the front panel of this system, and
your iPod/iPhone.
» [iPod/USB] scrolls..
» The system starts playing tracks that are stored on your
iPod/iPhone.
Note
Before you disconnect the iPod/iPhone, switch the system
to another source.
Control play
Button Function
Press repeatedly to select a control mode: control
play on your iPod/iPhone, or on the system.
Press to pause or resume play.
/
Press to play the previous or next track.
/
Press and hold to rewind a track or search forward
fast.
/DISP
Press repeatedly to display available information
about the current track.
Press repeatedly to select a repeat mode:
[REP ONE]: repeat the current track, or
[REP ALL]: repeat all tracks.
Press repeatedly to select a play mode:
[SHU ALL]: play all tracks randomly,
[SHU ALBM]: play tracks in the current
album randomly, or
[SHU OFF]: play all tracks in the iPod/iPhone
library in sequence.
Search for a track
track quickly.
1 Press to access the iPod/iPhone menu.
» [PLAYLIST] scrolls.
2 Rotate to select a category.
3 Press to access the list of tracks under the category.
»
4 Rotate to select a track.
»
5 Press to start play.
Charge your iPod/iPhone
starts.
8 Listen to an external
player
You can use the system to amplify the audio input from an
external player, for example, MP3 player.
1 Press AS/SOURCE repeatedly to switch the source to
[MP3--LINK].
2 Connect an MP3 link cable to
the MP3-LINK socket on the system, and
the audio output socket (usually the headphone socket)
on the external player.
3 Play the external player.
9 Adjust sound
The following operations are applicable to all supported media.
Button Function
Rotate to increase or decrease the volume level.
Press to mute the speakers or release them from
mute status.
Press to enable or disable the maximum volume.
Press and hold to enable or disable the Dynamic
Bass Boost (DBB) effect.
1 Press and hold to activate the setup of
2 Press repeatedly to select an option: [BAS]
(bass), [TRE] (treble), [BAL] (balance), or
[FAD] (fader).
3 Rotate to adjust the setting.
10 Reset the system
If the system works abnormally, reset the system to factory default
settings.
1 Detach the front panel.
2 Press the RESET button with the tip of a ball-point pen or
toothpick.
» All settings are reset to factory default.
11 Product Information
Note
General
Power supply 12 V DC (11 V - 16 V), negative
ground
Fuse
Suitable speaker impedance
Maximum power output
Continuous power output
10% T.H.D.)
Pre-Amp output voltage
Aux-in level
MP3-LINK
CE138
All registered and unregistered trademarks are
property of their respective owners.
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
EN User manual
RU
Radio
Frequency range - FM
step in manual search)
Usable sensitivity - FM
(S/N = 20 dB)
8 µV
Frequency range
Usable sensitivity -
30 µV
12 Troubleshooting
Warning
Never remove the casing of this product.
To keep the warranty valid, never try to repair the product
yourself.
If you encounter problems when using this product, check the
following points before requesting service. If the problem remains
and the model number and serial number are available.
No power or no sound
The power supply from car battery is cut off, or the car
battery runs out of energy. Power the system with car
battery.
Car engine is not on. Turn the car engine on.
Cable is not correctly connected. Check connections.
The fuse is burnt. Replace the fuse.
Volume is too low. Adjust volume.
If the above solutions cannot help, press the RESET button.
Make sure that the current track is in a compatible format.
Noise in broadcasts
Signals are too weak. Select other stations with stronger
signals.
Check the connection of the car antenna.
Change the broadcast setting from stereo to mono.
Battery cable is not correctly connected. Connect the
battery cable to the terminal that is always live.
Cannot switch the source to iPod/iPhone
Check whether the iPod/iPhone is securely connected.
Check whether the iPod/iPhone is compatible with this
system.
Check whether the iPod/iPhone battery is nearly empty.
Data error. Check the USB storage device or SD/SDHC
card.
13 Notice
user’s authority to operate the equipment.
Compliance
This product complies with the radio interference requirements of
the European Community.
Care of the environment
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
product it means that the product is covered by the European
Directive 2002/96/EC. Please inform yourself about the local
separate collection system for electrical and electronic products.
Please act according to your local rules and do not dispose of your
old products with your normal household waste.
Correct disposal of your old product helps to prevent potential
negative consequences for the environment and human health.
Environmental information
to make the packaging easy to separate into three materials:
cardboard (box), polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can be recycled and
the local regulations regarding the disposal of packaging materials,
exhausted batteries and old equipment.
Trademark notice
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
“Made for iPod” and “Made for iPhone” mean that an electronic
meet Apple performance standards. Apple is not responsible
for the operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this accessory
with iPod or iPhone may affect wireless performance.
iPod and iPhone are trademarks of Apple Inc., registered in the
U.S. and other countries.
Other trademarks and trade names are those of their respective
owners.
Copyright
2012 © Koninklijke Philips Electronics N.V.
are the property of Koninklijke Philips Electronics N.V or their
respective owners. Philips reserves the right to change products
at any time without being obliged to adjust earlier supplies
accordingly.
Question?
Contact
Philips
RU
com/welcome.
MSC
a
b
c
d
e
f
ab c
fed
1
1
2
3
e
f
g
h
i
2
1
2 REAR L
3 REAR R
ANTENNA
1
REAR
L
R
abcd
183 mm
53mm
5mm
2
3
4
5
6
1
2
1
2
1
» [PHILIPS]
[SELECT OPERATING REGION]
2
183 mm
53.5 mm
[AREA EUROPE]
[AREA ASIA]
[AREA MID--EAST]
[AREA AUST]
[AREA RUSSIA]
[AREA USA]
[AREA LATIN]
[AREA JAPAN]
3
»
1
2 /
[CLK 24H][CLK 12H].
3 [CLK 24H]
[CLK 12H].
[CLK 24H]
[CLK 12H]
1
2 /
[CLK]
3
4
AS/SOURCE
[RADIO]
[MP3--LINK]
MP3-LINK.
[iPod/USB]
[SD/SDHC]
1
2 /
[LOC ON][LOC OFF].
3
[LOC ON]
[LOC OFF]
1
2 /
[RDS ON][RDS OFF].
3 [RDS ON].
»
[RDS OFF].
1
[M].
2
1 AS/SOURCE
[RADIO].
2 BAND,
3 AS/SOURCE
[STORE---].
»
, , , ,
.
1 BAND,
2
3 , , , ,
1
2 AS/SOURCE
[iPod/USB][SD/
SDHC].
[iPod/USB].
3 .
/
/
/
/DISP
[REP ONE]:
[RPT FLD]:
[RPT ALL]:
[SHU ALL]:
[SHU FLD]:
[SHU OFF]:
1
»
2
3
.
1
»
2
3
»
iPod classic
» [iPod/USB].
»
/
/
/DISP
[REP ONE]:
[REP ALL]:
[SHU ALL]:
[SHU ALBM]:
[SHU OFF]:
1 .
» [PLAYLIST].
2
.
3
»
4
.
»
5
1 AS/SOURCE
[MP3--LINK].
2
MP3-LINK
3
1
2
[BAS][TRE]
[BAL]
[FAD]
3
MP3-LINK
!"# !!!$!!%"
& !!!'!
!!"() !)!!*!$
'!!" &
!! +,"-$!'!
,,.
(!"
(
.$
/01.234
5
*
2E-mail:
ɎɂɈ ɢɩɨɞɩɢɫɶɩɨɤɭɩɚɬɟɥɹ
0!60!7890!*
.!!
:$/
7!!6;!Philips, Philips Saeco, Philips Avent)
! "! . #"$" ! %$ $ &$
! " . ' (- ") ". & ! ! ! "! ) % & $
! " – *.
+ " (& %$" . %
, ! - * % %
! !$. ( - * " ( &( %" ) ( ) %") $( ., & ! %$
( . " / *" / * "!
. % %$( " ( " & !
%$ $) ! $ . ! % 0 $" ! "$" ) $" $" &) $) *. $ $1. *
- * $ %) & $ $ & . %$( * ) ) % " )
*" +/ *$" .
+! “Philips Consumer Lifestyle B.V.2) 4, 9206 ) (, ' $. + 3) 4 5 ( : 636) 3) 123022 !.
7 ) .#! 7 ) .13 0 & " *1. * " .&, ! *.)
* .8. ! !. 9* 0 1) 8, ) " $. ) /*
.& 8$ ! ",! ! /* ! "! % .
(!
** !
(""""##$$""""""##– $$%– !&'( AJ021025123456 – )*)+,+-""(##$$
##$$", ##$$"" "##$$"""" !!./0!1
' 8 ! ).8./ *./ *.)$$.&&$()"$() ,($(%)
$(8 ". & %$ $"$"*/ &( & *"
","- *:; "% ) $(:
<:' , - *)( ;
=:""(*>
? &$* @
? * $(!$(((&(""! !&
?; $((&(# 0;#1 .8() *$( $("@
? " .&;
?.&!.A & 0.$%$8.&($("A .8"1:
3. ""$0()% )::1@
; % ($ $ $).& )! & > ,)&($)$ ) )$ $) $)
8$- $) ))8)!-)$ ! &$- *:
5& (!<* (!$<*
, *$ 1 ! 5
# * $ A$)!$ ) $ !$) $ *$ 1 ! B!
$" )$!$ )/$)/ ) . /) ) $
.8" )& $$C
<! <!
4$ ( !( 0/ ,$)/ )$$) $ *).!)( ( )$)
-$)-&$8) $( ::1
=! B!
D$ $ ( 0Philips-Avent) =! =!
(
0
7
#)*
/
8 800 200-0880
0 $"3):&:$(/1)
(495) 961-1111
8 820 0011 0068
0 $" 4)
:&:$(/1
875 11 65 0123
0 $" * $(/
5 ( 1
$01
E-FF=<-FF$($(
E-FF=F-FF$($(
<=-FF=B-FF$($(
- "
www.philips.ru
www.philips.by
www.philips.kz
=+>>>"?@ABA?C"DE !#F@ABA?C– !)!!)!!)!$$
+"G,,*,$)$$ &*46
*2334533346633783966:www.philips.kz -!"4
1
2 RESET
»
8 µV
30 µV
RESET.
-
1
-
2
Philips CE138/51 Guide de démarrage rapide
- Catégorie
- Systèmes vidéo de voiture
- Taper
- Guide de démarrage rapide
dans d''autres langues
- English: Philips CE138/51 Quick start guide