VTech CL83414 Manuel utilisateur

User’s manual

CL80114

DECT 6.0 expansion handset

for use with AT&T models

CL81114/CL81214/CL82114/

CL82214/CL82314/CL82364/

CL82414/CL82464/CL82514/

CL83114/CL83214/CL83314/

CL83364/CL83414/CL83464

Congratulations

on your purchase of this AT&T product. Before using this AT&T

product, please read the Important safety information section on

pages 21-23 of this manual. For complete instructions, please

refer to the manual provided with your CL81114/CL81214/CL82114/

CL82214/CL82314/CL82364/CL82414/CL82464/CL82514/

CL83114/CL83214/CL83314/CL83364/CL83414/CL83464

telephone. You can also visit our website at

www.telephones.att.com or call 1 (800) 222-3111. In

Canada, dial 1 (866) 288-4268.

This telephone meets the California Energy Commission regulations

for energy consumption. Your telephone is set up to comply with the

energy-conserving standards right out of the box. No further action

is necessary.

Model number: CL80114

Type: DECT 6.0 expansion handset

Serial number:

Purchase date:

Place of purchase:

Both the model and serial numbers of your AT&T product can be

found on the bottom of the telephone base.

Save your sales receipt and original packaging in case it is

necessary to return your telephone for warranty service.

Telephones identified with this logo have reduced noise and

interference when used with most T-coil equipped hearing aids and

cochlear implants. The TIA-1083 Compliant Logo is a trademark of

the Telecommunications Industry Association. Used under license.

the AT&T logo are trademarks of AT&T Intellectual Property licensed to

Advanced American Telephones, San Antonio, TX 78219. Printed in China.

The ENERGY STAR® program (www.energystar.gov) recognizes and

encourages the use of products that save energy and help protect

our environment. We are proud to supply this product with an

ENERGY STAR® qualified power adapter meeting the latest energy

efficiency guidelines.

Parts checklist

Your telephone package contains the following items. Save your

sales receipt and original packaging in the event warranty service

is necessary.

Battery for

cordless handset

Cordless handset

Charger for cordless

handset with power

adapter installed

Battery

compartment

cover

User’s manual

CL80114

DECT 6.0 expansion handset

for use with AT&T models

CL81114/CL81214/CL82114/

CL82214/CL82314/CL82364/

CL82414/CL82464/CL82514/

CL83114/CL83214/CL83314/

CL83364/CL83414/CL83464

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT183342/BT283342 (2.4V 400mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine CR1349

User’s manual

CL80114

DECT 6.0 expansion handset

for use with AT&T models

CL81114/CL81214/CL82114/CL82214/

CL82314/CL82364/CL82414/CL82464/

CL82514/CL83114/CL83214/CL83314/

CL83364/CL83414/CL83464

Table of contents

Getting started

Installation ...................................................................................................................1

Quick reference guide - handset ......................................................................2

Charger installation .................................................................................................5

Battery installation and charging .....................................................................6

Registration and deregistration

Adding and registering handsets .....................................................................9

Register a handset to your telephone base ..........................................9

Deregistering handsets ......................................................................................11

Deregister all handsets from your telephone base .........................11

Appendix

Troubleshooting .....................................................................................................12

Maintenance.............................................................................................................20

Important safety information ..........................................................................21

Safety information.............................................................................................21

Especially about cordless telephones .....................................................22

Precautions for users of implanted cardiac pacemakers ..............23

Pacemaker patients ..........................................................................................23

ECO mode .............................................................................................................23

Especially about telephone answering systems ................................23

For C-UL compliance ...........................................................................................24

Mesures de sécurité importantes ..............................................................24

FCC Part 68 and ACTA........................................................................................27

FCC Part 15 ..............................................................................................................29

California Energy Commission battery charging testing instructions ...30

Limited warranty ....................................................................................................31

Technical specifications .....................................................................................34

DECT 6.0 digital technology .........................................................................34

Telephone operating range ..........................................................................34

Redefining long range coverage and clarity ........................................34

HD audio ................................................................................................................34

Simulated full-duplex handset speakerphone ....................................35

See pages 6-8

for easy instructions.

You must install and

charge the battery before

using the telephone.

Installation

Your product may be shipped with a protective sticker covering the

handset display - remove it before use.

For customer service or product information, visit our website at

www.telephones.att.com or call 1 (800) 222-3111.

In Canada, dial 1 (866) 288-4268.

Avoid placing the telephone base and charger too close to:

Communication devices such as television sets, VCRs, or other

cordless telephones.

Excessive heat sources.

Noise sources such as a window with traffic outside, motors,

microwave ovens, refrigerators, or fluorescent lighting.

Excessive dust sources such as a workshop or garage.

Excessive moisture.

Extremely low temperature.

Mechanical vibration or shock such as on top of a washing

machine or workbench.

•

Getting started

1

STOP!

Quick reference guide - handset

Getting started

2

CHARGE light

On when the handset is charging in the

telephone base or charger.

qCID/VOLUME

Press qCID to show caller ID log when

the handset is not in use.

Press to scroll down while in menus.

While entering names or numbers, press

to move the cursor to the left.

Press to decrease the listening volume when

on a call.

Press to decrease the message playback

volume (for models with built-in answering

system only).

•

/SPEA�ERSPEA�ER

Press to make or answer a call using the

speakerphone.

TONE /a>A

Press to switch to tone dialing temporarily

during a call if you have pulse service.

While entering names, press to change the

next letter to upper or lower case.

•

1

Press and hold to set or to dial your

voicemail number.

PHONE/FLASH

Press to make or answer a call.

During a call, press to answer an incoming

call when you receive a call waiting alert.

•

REDIAL/PAUSE

Press repeatedly to view the last ten

numbers dialed.

While entering numbers, press and hold to

insert a dialing pause.

•

Quick reference guide - handset

Getting started

3

pDIR/VOLUME

Press pDIR to show directory entries

when the handset is not in use.

Press to scroll up while in menus.

While entering names or numbers, press

to move the cursor to the right.

Press to increase the listening volume

when on a call.

Press to increase the message playback

volume (for models with built-in answering

system only).

•

MENU/SELECT

When the handset is not in use, press to

show the menu.

While in the menu, press to select an item

or save an entry or setting.

•

OFF/CANCEL

During a call, press to hang up.

While in a menu, press to cancel an

operation, back up to the previous menu,

or exit the menu display; or press and hold

this button to exit to idle mode.

Press and hold while the telephone is not

in use to erase the missed call indicator.

•

QUIET# (pound key)

Press and hold to enter the QUIET mode

setting screen, or to deactivate QUIET mode.

MUTE/DELETE

During a call, press to mute the

microphone.

While reviewing the caller ID log, the

directory or the redial memory, press to

delete an individual entry.

While predialing, press to delete digits.

•

EQ

During an outside call, intercom call, message

or announcement playback, press to change

the audio quality to best suit your hearing.

Quick reference guide - handset

Getting started

4

For complete instructions, refer to the manual provided with

your CL81114/CL81214/CL82114/CL82214/CL82314/CL82364/

CL82414/CL82464/CL82514/CL83114/CL83214/CL83314/

CL83364/CL83414/CL83464 telephone system. If you are unable to

find your manual, go to www.telephones.att.com/manuals to

read and/or download the manual.

Handset side view

Main menu

The > symbol highlights

a menu item.

Main menu

Play messages

Answering sys

Directory

Caller ID log

Call block

Intercom

Ringers

Set date/time

Settings

Web address

Using menus:

Press MENU/SELECT to show

the menu.

Press qCID or pDIR to scroll

through menu items.

Press MENU/SELECT to confirm

or save changes to a highlighted

menu item.

Press OFF/CANCEL to cancel an

operation, back up to the previous

menu, or exit the menu display.

•

>Play messages

Answering sys

Only on CL81114/

CL81214/CL82114/

CL82214/CL82314/

CL82364/CL82414/

CL82464/CL82514

telephone system

PUSH TO TAL�

Press to initiate a one-to-one or one-to-group broadcast.

Press and hold to broadcast to a group of system devices.

•

IMPORTANT INFORMATION

1. Use only the power adapter supplied with this product. To order a replacement

power adapter, visit our website at www.telephones.att.com or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

2. The power adapter is intended to be correctly oriented in a vertical or floor

mount position. The prongs are not designed to hold the plug in place if it is

plugged into a ceiling, under-the-table or cabinet outlet.

Plug the power adapter into an

electrical outlet not controlled by

a wall switch.

5

Charger installation

Install the charger, as shown below.

Getting started

6

Battery installation and charging

Install the battery, as shown on page 7. Once you have installed

the battery, the screen indicates the battery status (see the

following table). If necessary, place the handset in the telephone

base or charger to charge the battery. For best performance, keep

the handset in the telephone base or charger when not in use. The

battery is fully charged after ten hours of continuous charging. See

the table on page 34 for battery operating times.

If the screen shows Place in charger and flashes, you need to

charge the handset without interruption for at least 30 minutes to

give the handset enough charge to use the telephone for a short

time. The following table summarizes the battery charge indicators

and actions to take.

Getting started

Battery indicators Battery status Action

The screen is blank, or

shows Place in charger

and (flashing).

Battery has no or

very little charge. The

handset cannot be used.

Charge without interruption

(at least 30 minutes).

The screen shows

Low battery and

(flashing).

Battery has enough

charge to be used for a

short time.

Charge without interruption

(at least 30 minutes).

The screen shows

HANDSET X.

Battery is charged. To keep the battery

charged, place it in the

telephone base or charger

when not in use.

NOTE: If you are on a phone call in low battery mode, you hear four short

beeps every minute.

Battery installation and charging

Getting started

7

Step 1

Plug the battery connector securely into the socket inside the

handset battery compartment. Insert the supplied battery with the

label THIS SIDE UP facing up, as indicated.

Step 2

Align the cover flat against the battery compartment, then slide it

upwards until it clicks into place.

Step 3

Charge the handset by placing it

face forward in the telephone base

or charger. The CHARGE light on the

handset is on during charging.

CHARGE light

T

Battery Pa

BT162342/B

WA

RNING /

AV

DO NOT BURN

O

NE P

AS INCINÉRER

Made in China / Fabr

i

THIS

SIDE

UP / CE

CÔ

TÉ

VERS LE HA

UT

Batte

ry

Pa

c

k

/ Bloc

-piles

:

BT

1

83342/BT2833

4

2

(2.4V

4

0

m

Ah Ni-MH)

W

ARNI

N

G

/

AV

ERTISSEMENT

:

DO NOT BURN OR PUNCTURE BA

TTERIES.

NE

PA

S INCINÉRER OU PERCER LES PILES

.

Made in China / Fabriqué

e

n

chine CR134

9

AU

T

MH

)

42

3

IMPORTANT INFORMATION

1. Use only the supplied rechargeable battery or replacement battery

(model BT183342/BT283342). To order, visit our website at

www.telephones.att.com or call 1 (800) 222-3111.

In Canada, dial 1 (866) 288-4268.

2. If you do not use the handset for a long time, disconnect and remove

the battery to prevent possible leakage.

Battery installation and charging

After you install your telephone or power returns following a power

outage, the handset will prompt you to set the date and time. After

that, it will prompt if you want to set up the answering system

via voice guide (only for CL82114/CL82214/CL82314/CL82364/

CL82414/CL82464/CL82514 telephone system). Press MENU/SELECT

to start. For details, see the corresponding sections in the telephone

system’s user’s manual. To skip these settings, press

OFF/CANCEL

.

Getting started

8

Adding and registering handsets

Before using a new CL80114 handset, you must register it with the

AT&T CL81114/CL81214/CL82114/CL82214/CL82314/CL82364/

CL82414/CL82464/CL82514/CL83114/CL83214/CL83314/

CL83364/CL83414/CL83464 telephone system (purchased

separately). The telephone system can support up to 12 handsets.

The handsets provided with your telephone system are already

registered as HANDSET 1, and so forth. Additional handsets

registered to the telephone system are assigned in sequential

order they are registered (up to HANDSET 12).

You must register each handset separately. When first purchased, all

expansion handsets show To register HS, see manual.

Register a handset to your telephone base

1. Before you begin registration, make sure the

handset is out of the telephone base or charger

and shows To register HS, see manual.

2. Put the handset you wish to register on the

telephone base cradle.

3. The screen shows Registering... Please wait and

the IN USE light on the telephone base turns

on. If the registration is successful, HANDSET X

Registered appears on the screen (HANDSET

represents the handset name, X represents

the handset number). The handset beeps and

the IN USE light turns off. The handset is now

registered with the telephone base.

Registration and deregistration

9

To register HS,

see manual.

For registration, put the handset on the

telephone base, not the handset charger.

Registering...

Please wait

HANDSET X

Registered

Adding and registering handsets

If registration fails, follow the instructions, as mentioned below, to

register a handset to the telephone base.

NOTES:

Make sure the handset is out of the telephone base or charger and shows

To register HS, see manual.

For CL83114/CL83214/CL83314/CL83364/CL83414/CL83464 telephone, when

the telephone base prompts you to set the date and time, follow the instructions

in the user’s manual to set it or skip the setting by pressing CANCEL.

For CL83114/CL83214/CL83314/CL83364/CL83414/CL83464 telephone, after

the date and time setting is done or skipped, the telephone base will prompt if

you want to set up the answering system. Press MENU/SELECT to start the setup

via voice guide or press CANCEL to skip the setup. The telephone base now

enters idle mode.

1. On the telephone base, press and hold /HANDSET LOCATOR

for about five seconds. Then, release the button after the IN USE

light turns on.

2. On the handset, press QUIET # (pound key) immediately and the

screen shows Registering... Please wait.

3. When the registration process completes, HANDSET X

Registered appears on the screen ((HANDSET represents the

handset name, X represents the handset number). The handset

beeps and the IN USE light turns off. The handset is now

registered with the telephone base.

The system will automatically try to register again if registration

fails. If it fails after the third try, Registration failed appears on the

screen. The handset shows To register HS, see manual. This may

take up to five minutes to occur. Please start again from Step 1.

NOTES:

You cannot register a handset if any other system handset is in use.

For CL83114/CL83214/CL83314/CL83364/CL83414/CL83464 telephone, the

telephone base shows Registration slots are full and sounds two beeps, if you

try to register more than 12 handsets.

•

Registration and deregistration

10

Registration and deregistration

Deregistering handsets

You may need to deregister your handsets if:

You have 12 registered handsets and need to replace a handset.

-OR-

You wish to change the designated handset number of your

registered handsets.

You must first deregister ALL the handsets, and then register each

handset you wish to use again, one at a time.

Please read carefully through all the instructions on this page

before beginning the deregistration process.

Deregister all handsets from your telephone base

In addition to the cordless handsets, this operation will also

deregister all cordless headsets and speakerphones registered to

your telephone base.

1. Make sure that all handsets are out of the telephone base and

chargers before you begin deregistration.

2. Press and hold /HANDSET LOCATOR on the telephone base

for about ten seconds (until the IN USE light starts to flash).

Release /HANDSET LOCATOR.

3. Immediately press /HANDSET LOCATOR again while the

IN USE light is still flashing. (If the light stops flashing, start

again with Step 1.)

4. It takes up to ten seconds to complete deregistration. Before

registering the handset again, wait for the cordless handset

screen to display To register HS, see manual.

5. To register the handset(s) to the telephone base again, follow

the instructions on pages 9-10.

NOTES:

If the deregistration process is not successful, you might need to reset the

system and try again. To reset, unplug the power from the telephone base and

plug it back in.

You cannot deregister the handset(s) if any other system handset is in use.

Even if the battery is depleted, you can still deregister the handset by following

the steps mentioned above. After the handset is charged for at least ten

minutes, the screen shows To register HS, see manual.

•

11

Troubleshooting

If you have difficulty with your phone, please try the following

suggestions, as mentioned below. For Customer Service, visit our

website at www.telephones.att.com or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

The handset registration is unsuccessful.

Follow the handset registration instructions to register the handset

again (see Adding and registering handsets on pages 9-10).

My telephone doesn’t work at all.

Make sure the power cord is securely plugged in.

Make sure you plug the battery connector securely into the

cordless handset.

Make sure you plug the telephone line cord securely and firmly

into the telephone base and the telephone wall jack.

Charge the battery in the cordless handset for at least 10 hours.

For optimum daily performance, return the cordless handset to

the telephone base or charger when not in use.

If the battery is depleted, it might take approximately 30 minutes

to charge the handset before it shows Low battery. See page 6

for details.

Reset the telephone base. Unplug the electrical power. Wait for

approximately 15 seconds, then plug it back in. Allow up to one

minute for the cordless handset and telephone base to reset.

You may need to purchase a new battery. Refer to Battery

installation and charging in this user’s manual on pages 6-8.

The display shows No line. I cannot get a dial tone.

Try all the suggestions, as mentioned above.

If the previous suggestions do not work, disconnect the

telephone line cord from your telephone and connect the

telephone line cord to another telephone.

If there is no dial tone on that other telephone either, your

telephone line cord may be defective. Install a new telephone

line cord.

•

Appendix

12

Troubleshooting

Appendix

13

If changing the telephone line cord does not help, the wall

jack (or the wiring to this wall jack) may be defective. Try

using a different wall jack in your home to connect your

CL81114/CL81214/CL82114/CL82214/CL82314/CL82364/

CL82414/CL82464/CL82514/CL83114/CL83214/CL83314/

CL83364/CL83414/CL83464 telephone, or contact your, or contact your contact your

telephone service provider (charges may apply).

I cannot dial out.

Try all the suggestions, as mentioned above.

Make sure you have a dial tone before dialing. The cordless handset

might take a second or two to find the telephone base and produce

a dial tone. This is normal. Wait an extra second before dialing.

Eliminate any background noise. Noise from a television, radio or

other appliances might cause the phone to not dial out properly.

If you cannot eliminate the background noise, try muting the

cordless handset before dialing, or dialing from another room

with less background noise.

If other phones in your home are having the same problem,

contact your telephone service provider (charges might apply).

My cordless handset isn’t performing normally.

Make sure you plug the power cord securely into the telephone

base. Plug the power adapter into a different, working electrical

outlet without a wall switch.

Move the cordless handset closer to the telephone base. You

might have moved out of range.

Reset the telephone base. Unplug the electrical power. Wait for

15 seconds, then plug it back in. Allow up to one minute for the

cordless handset and telephone base to reset.

Other electronic products such as HAM radios and other DECT

phones, can cause interference with your cordless phone. Try

installing your phone as far away as possible from these types

of electronic devices.

•

Troubleshooting

Appendix

Out of range OR No pwr at base appears on my cordless handset.

Ensure you plug the telephone base in properly and the power is on.

Place the cordless handset in the telephone base for one

minute to allow the cordless handset and base to synchronize.

Move the cordless handset closer to the telephone base. You

might have moved out of range.

Reset the telephone base. Unplug the electrical power. Wait for

15 seconds, then plug it back in. Allow up to one minute for the

cordless handset and telephone base to reset.

Other electronic products such as HAM radios and other DECT

phones, can cause interference with your cordless phone. Try

installing your phone as far away as possible from these types

of electronic devices.

The batteries do not hold a charge.

If the cordless handset is in the telephone base or charger

and the charge light is not on, refer to The charge light is off

(page 19) in this Troubleshooting guide.

Charge the battery in the cordless handset for at least 10 hours.

For optimum daily performance, return the cordless handset to

the telephone base or charger when not in use.

If the battery is depleted, it might take approximately 30 minutes to

charge the handset before it shows Low battery. Refer to the table

on page 6 for details.

You might need to purchase a new battery. Refer to Battery

installation and charging in this user’s manual on pages 6-8.

I hear other calls while using my phone.

Disconnect the telephone base from the telephone jack, and

plug in a different telephone. If you still hear other calls, call

your telephone service provider.

•

14

I get noise, static, or weak signals even when I’m near the

telephone base.

If you subscribe to high-speed Internet service (DSL - digital

subscriber line) through your telephone line, you must install a

DSL filter between the telephone line cord and the telephone

wall jack. The filter prevents noise and caller ID problems as

a result of DSL interference. Please contact your DSL service

provider for more information about DSL filters.

You may be able to improve the performance of your cordless

phone by installing your new telephone base as far as possible

from any other existing cordless telephone system that may

already be installed.

Other electronic products such as HAM radios and other DECT

phones, can cause interference with your cordless phone. Try

installing your phone as far away as possible from these types

of electronic devices.

Do not install this phone near a microwave oven or on the same

electrical outlet. You might experience decreased performance

while the microwave oven is operating.

If you plug your phone in with a modem or a surge protector,

plug the phone (or modem/surge protector) into a different

location. If this does not solve the problem, relocate your phone

or modem farther apart from one another, or use a different

surge protector.

Move your phone to a higher location. The phone might have

better reception in a high area.

If the other phones in your home are having the same problem,

contact your telephone service provider (charges may apply).

I experience poor sound quality when using the speakerphone.

For increased sound quality while using the speakerphone, place

the handset on a flat surface with the dialing keys facing up.

•

Troubleshooting

Appendix

15

My cordless handset does not ring when I receive a call.

Make sure that the ringer is not off. Refer to Ringer volume

in the user’s manual provided with your CL81114/CL81214/

CL82114/CL82214/CL82314/CL82364/CL82414/CL82464/

CL82514/CL83114/CL83214/CL83314/CL83364/CL83414/

CL83464 telephone.

Make sure you plug the telephone line cord securely into the

telephone base and telephone jack. Make sure you plug in the

power cord securely.

The cordless handset may be too far from the telephone base.

Charge the battery in the cordless handset for at least 10 hours.

For optimum daily performance, return the cordless handset to

the telephone base or charger when not in use.

You may have too many extension phones on your telephone

line to allow all of them to ring simultaneously. Try unplugging

some of the other phones.

The layout of your home or office might be limiting the

operating range. Try moving the telephone base to another

location, preferably on an upper floor.

If the other phones in your home are having the same problem,

contact your telephone service provider (charges might apply).

Test a working phone at the phone jack. If another phone has

the same problem, contact your telephone service provider

(charges might apply).

Other electronic products such as HAM radios and other DECT

phones, can cause interference with your cordless phone. Try

installing your phone as far away as possible from these types

of electronic devices.

Completely remove the battery. Replace it and place the

cordless handset into the telephone base. Allow up to one

minute for the handset to reestablish its connection with the

telephone base.

Your line cord might be defective. Try installing a new line cord.

•

Troubleshooting

Appendix

16

La page charge ...

VTech CL83414 Manuel utilisateur

VTech CL83414 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents