For additional help, visit:
ring.com/help
Let’s get started.
Quick Start
Installation
QR+FR
IMPORTANT PRODUCT INFORMATION
Safety and Compliance Information
Use Responsibly.
Read all instructions and safety information before use.
SAFETY INFORMATION
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE,
ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.
Please read and follow this safety information when operating the device. We cannot guarantee that no accidents or damage
will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Do not attempt to disassemble, repair, or modify the device. Do not use the device where wireless devices are not
allowed. For outdoor usage, use this product with ground fault circuit interrupter (GFCI) outlet. Risk of electric
shock. Do not open. No user serviceable parts inside. Refer servicing to qualified service personnel.
WARNING
• Timer could turn-on unexpectedly without the user being present. To Reduce the Hazardous Condition—
Unplug the appliance that is plugged into the receptacle(s) controlled by the timer before servicing.
• Risk of Electric Shock. Do not plug into another relocatable power tap or an extension cord.
• When plugged into grounded 3-prong outlet, always ensure that the housing is facing downward and is at least
• DO NOT expose to heavy rain or immerse in water or any other liquid.
• DO NOT remove ground pin (middle pin) or use with 3-to 2-prong adapter.
• DO NOT use with devices that should not be operated unattended, such as power tools.
• DO NOT use in precision timing applications where inaccurate timing could be dangerous (sunlamps, Saunas , etc).
• Keep children away from smart plug and outlet.
• No Serviceable parts inside. DO NOT open or tamper with unit.
• Do not discard the stopper, the plug should be covered when the socket is not in use.
• Remove smart plug from outlet before cleaning.
• DO NOT clean with liquid.
• DO NOT exceed the recommended electrical ratings.
Do not defeat the safety purpose of the grounding-type plug. A grounding type plug has two blades
and a third grounding prong. The grounding prong is provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•
• Consult the dealer or an experienced radio/TV technician for help.
Pursuant to Section 15.21 of the FCC rules, changes or modifications to a Product by the user that are not expressly
approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device meets the FCC Radio Frequency Emission Guidelines. Information on the product is on file with the FCC and can be found by
inputting such Product’s FCC ID (which can be found on the device) into the FCC ID Search form available at fcc.gov/oet/ea/fccid.
The party responsible for FCC compliance is: Ring LLC, 1523 26th St, Santa Monica, CA USA, 90404.
INFORMATION REGARDING EXPOSURE TO RADIO FREQUENCY ENERGY: The output power of the radio
technology used in the Product is below the radio frequency exposure limits set by the FCC. This device should be
installed and operated with a minimum distance of 20cm between the radiator and your body. It is advised to use
the Product in such a manner that minimizes the potential for human contact during normal operation.
Product Specifications
Device Name: Ring Smart Lighting Outdoor Smart Plug
Model Number: 5E22E9
Operating Temperature: -20°C~50°C (-4°F~122°F)
Operating Humidity: 10%~90%RH, Non-condensing
Storage Humidity: 5%~90%RH, Non-condensing
RECYCLING YOUR DEVICE PROPERLY: In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of,
or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to
amazon.com/devicesupport.
Terms of Service and Warranty
By purchasing or using the product, you agree to the Terms of Service found at ring.com/terms.
For information on our warranty and Ring Protect Plans, see ring.com/legal.
1. Download the Ring app.
The Ring app walks you through setting up and
managing your Outdoor Smart Plug.
2. Set up and install your Ring Bridge.
Your Bridge connects your Outdoor Smart Plug to
the Ring app.
3. Open the Ring app and tap Set Up a Device.
Select Outdoor Smart Plug and scan this QR code.
Then, just follow the in-app instructions to install
and set up this device.
1. Connect your Outdoor Smart Plug
to a weatherproof GFCI outlet.
Place it with the outlets facing down,
at least 2 ft. above the ground.
You can secure your device to the
wall with the included hardware.
2. Plug your devices in.
If you’re only using one outlet,
seal the other outlet with the
included cover.
QUICK START GUIDE
300G C2S
IMPORTANT PRODUCT INFORMATION
FOR UNITES STATES CUSTOMERS
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Information on this device is on file with the FCC and can be found by
inputting the device’s FCC ID into the FCC ID Search form available at
https://www.fcc.gov/oet/ea/fccid.
The output power of the radio technology used in the Products is below the
radio frequency exposure limits set by the FCC. Nevertheless, it is advised to
use the product in such a manner that minimizes the potential for human
contact during normal operation. This device should be installed and
operated with at least 20 cm between the radiator and your body.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this
equipment.
For information about recycling your device, go to
www.amazon.com/devicesupport
10/14/20 5:25 PM 1 10/14/20 5:25 PM
FOR CANADIAN CUSTOMERS
Innovation, Science and Economic Development Canada (ISED)
Compliance.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-
exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this
equipment.
Information Regarding Exposure to Radio Frequency Energy
This equipment complies with IC RSS-102 RF exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance
of 20 cm between the radiator and your body.
POUR LES CLIENTS CANADIENS
Conformité Innovation Sciences et Développement Économique Canada
(ISDE)
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage.
(2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Renseignements relatifs à l’exposition à l’énergie des radiofréquences
Cet équipement est conforme aux limites d’exposition IC CNR-102 prévues
pour des environnements non contrôlés.
Cet équipement doit être installé et utilisé avec un minimum de 20 cm de
distance entre la source de rayonnement et votre corps.
CAN ICES-3 (B)/NMB-3(B)
-
1
-
2
dans d''autres langues
- English: Ring RBWP001 User manual
Documents connexes
-
Ring 5C28S6 TPUB Alarm Bear Glass Break Sensor Manuel utilisateur
-
Ring SF49E9 Mode d'emploi
-
Ring 5D22E2 Mode d'emploi
-
Ring 5F49E9 Manuel utilisateur
-
Ring BHAXN001 Mode d'emploi
-
Ring 169AGBS Mode d'emploi
-
Ring 5B21S8-BEN0 Manuel utilisateur
-
Ring Smart Lighting Bridge App Mode d'emploi
-
Ring 169MAILBXB Mode d'emploi
