Silvercrest Tower Fan Heater STHL 2000 A1 Mode d'emploi

TOWER FAN HEATER STHL 2000 A1

TURM-HEIZLÜFTER STHL 2000 A1

RADIATEUR SOUFFLANT TOUR STHL 2000 A1

IAN 367685_2101

IEGB NI CY MT

TOWER FAN HEATER

Operating and Safety Instructions

This product is only suitable for well

insulated spaces or occasional use.

ATDE CH

TURM-HEIZLÜFTER

Bedienungs- und Sicherheitshinweise

Dieses Produkt ist nur für gut isolierte Räume oder

für den gelegentlichen Gebrauch geeignet.

DK

VARME-VENTILATORTÅRN

Betjenings- og sikkerhedsinstruktioner

Dette produkt er kun egnet til godt isolerede

rum eller lejlighedsvis brug.

ES

CALEFACTOR DE TORRE

Instrucciones de utilización y de seguridad

Este producto está indicado únicamente en

lugares abrigados o para una utilización puntual.

SK

VEŽOVÝ TEPLOVZDUŠNÝ VENTILÁTOR

Návod na obsluhu a bezpečnostné pokyny

Tento výrobok je určený iba do dobre izolovaných

priestorov alebo na príležitostné použitie.

PL

TERMOWENTYLATOR WIEŻA

Wskazówki użytkowania i bezpieczeństwa

Ten produkt jest odpowiedni tylko do

sporadycznego użytku lub do stosowania w

dobrze izolowanych pomieszczeniach.

CZ

VĚŽOVÝ OHŘÍVAČ S VENTILÁTOREM

Pokyny pro obsluhu a bezpečnostní pokyny

Tento výrobek je vhodný pouze pro dobře

izolované prostory nebo občasné používání.

BENL

TOREN-VENTILATORKACHEL

Bedienings- en veiligheidsinstructies

Dit product is uitsluitend geschikt voor goed

geïsoleerde plaatsen of voor incidenteel gebruik.

BEFR CH

RADIATEUR SOUFFLANT TOUR

Instructions d‘utilisation et consignes de sécurité

Ce produit ne peut être utilisé que dans des locaux

bien isolés ou de manière occasionnelle.

OS

TOWER FAN HEATER STHL 2000 A1

TURM-HEIZLÜFTER STHL 2000 A1

RADIATEUR SOUFFLANT TOUR STHL 2000 A1

GB/IE/NI/CY/MT Operation and Safety Instructions Page 5

DE/AT/CH Bedienungs- und Sicherheitshinweise Seite 21

FR/BE/CH Instructions d‘utilisation et consignes de sécurité Page 37

NL/BE Bedienings- en veiligheidsinstructies Pagina 53

CZ Pokyny pro obsluhu a bezpečnostní pokyny Strana 69

PL Wskazówki użytkowania i bezpieczeństwa Strona 85

SK Návod na obsluhu a bezpečnostné pokyny Strana 101

ES Instrucciones de utilización y de seguridad Página 117

DK Betjenings- og sikkerhedsinstruktioner Side 133

GB IE CYNI MT

Before reading, fold out the page with the images and familiarise yourself with all the features of the

device.

DE AT CH

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit

allen Funktionen des Gerätes vertraut.

FR BE CH

Avant de lire le mode d‘emploi, ouvrez la page contenant les illustrations et familiarisez-vous ensuite

avec toutes les fonctions de l‘appareil.

NL BE

Vouw vóór het lezen de pagina met de afbeeldingen open en maak u vertrouwd met alle functies van

het apparaat.

CZ

Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi funkcemi přístroje.

PL

Przed rozpoczęciem czytania rozłóż stronę zawierającą rysunki, a następnie zapoznaj się ze wszyst-

kimi funkcjami urządzenia.

SK

Prv než začnete čítať tento návod, rozložte si stránku s obrázkami a oboznámte sa so všetkými funk-

ciami zariadenia.

ES

Antes de empezar a leer abra la página que contiene las imágenes y, en seguida, familiarícese con

todas las funciones del dispositivo.

DK

Før du læser, skal du folde siden ud med illustrationer og derefter gøre dig bekendt med alle enhedens

funktioner.

7

9

10

14

11

12

13

8

15

16

1

5

2

4

3

6

GB/IE/NI/MT/CY 5

1. Introduction ........................................................................................................................ Page 7

1.1 Intended use ........................................................................................................................ Page 7

1.2 Scope of delivery ................................................................................................................ Page 7

1.3 Features ................................................................................................................................ Page 7

1.4 Technical data ..................................................................................................................... Page 7

2. Safety indications ........................................................................................................... Page 9

2.1 General safety indications

Safety of electrical appliances for home use .................................................................... Page 9

2.2 Speciﬁc safety indications

Special requirements for room heating appliances .......................................................... Page 10

2.3 Additional safety indications .............................................................................................. Page 11

2.4 Information about batteries ................................................................................................ Page 12

3.

Before commissioning (

Tower fan heater

without remote control)

..... Page 14

3.1 Setting up the appliance ..................................................................................................... Page 14

4. Commissioning (Tower fan heater without remote control) ................ Page 14

4.1 Standby mode ..................................................................................................................... Page 14

4.2 Fan mode ............................................................................................................................. Page 14

4.3 Heating level setting (heating mode) ................................................................................ Page 14

4.4 Switching the appliance oﬀ ................................................................................................ Page 14

4.5 Oscillation function ............................................................................................................. Page 15

4.6 Temperature setting ............................................................................................................. Page 15

4.7 Timer setting ........................................................................................................................ Page 15

5.

Before commissioning the

tower fan heater

with remote control .......

Page 15

5.1 Remote control: Inserting/changing the battery ............................................................... Page 15

GB/IE/NI/MT/CY6

6. Commissioning (Tower fan heater with remote control) ....................... Page 16

6.1 Standby mode ..................................................................................................................... Page 16

6.2 Fan mode ............................................................................................................................. Page 16

6.3 Heating level setting (heating mode) ................................................................................ Page 16

6.4 Switching the appliance oﬀ ................................................................................................ Page 16

6.5 Oscillation function ............................................................................................................. Page 16

6.6 Temperature setting ............................................................................................................. Page 17

6.7 Timer setting ........................................................................................................................ Page 17

7. Protective devices for the appliance ................................................................... Page 17

7.1 Overheating protection ....................................................................................................... Page 17

7.2 Tip-over protection ............................................................................................................... Page 17

8. Maintenance, cleaning and storage ................................................................... Page 18

9. Disposal ................................................................................................................................ Page 18

10. EU conformity .................................................................................................................... Page 18

11. Guarantee from ROWI Germany GmbH ........................................................ Page 18

12. Service ................................................................................................................................... Page 20

GB/IE/NI/MT/CY 7

1. Introduction

Congratulations on purchasing your new appliance.

You have decided in favour of a high-quality prod-

uct. The operating instructions are part of this prod-

uct. They contain important information regarding

the safety, use and disposal. Familiarise yourself

with all the operating and safety indications prior

to using the product. Only use the product as de-

scribed and for the specified areas of use. If you

pass the product on to third parties, hand out all the

documents too.

1.1 Intended use

This product is only suitable for well-insulated rooms

or occasional use. The appliance is not intended for

use in rooms in which special conditions prevail, e.g.

a corrosive or explosive atmosphere (dust or gas).

Do not use this appliance outdoors. Every further

use or change to the appliance is viewed as not

in accordance with its intended use and involves

considerable accident risks. We assume no liability

for damages arising from improper use. The heater

blower is only determined for use as supplementary

heating and exclusively for private use.

1.2 Scope of delivery

1 Tower fan heater STHL 2000 A1

1 Remote control (including coin cell)

1 Set of operating instructions

TOWER FAN HEATER STHL 2000 A1

1.3 Features

Tower fan heater

1 Display

2 Temperature key

3 Timer key

4 Oscillation key

5 On/off key

6 On and off switch

Remote control

7 On/off key

8 Temperature key

9 Plus key

10 Minus key

11 Timer key

12 Oscillation key

13 Heating level key

14 Battery compartment

15 Lock

16 Coin cell (battery)

1.4 Technical data

Tower fan heater STHL 2000 A1

Input voltage: 220-240 V~

(alternating current)

Mains frequency: 50-60 Hz

Rated power: 2000 W

Heating level 1: 1200 W

Heating level 2: 2000 W

Protection rating: II

Temperature selection range: 15 ºC - 40 ºC

Timer: 24 hours

Mains cable length: 1.8 m

Remote control (only for use with Tower fan

heater STHL 2000 A1)

Battery supply: 3 V (direct current)

CR2025

: Lithium battery

GB/IE/NI/MT/CY8

Information requirements for electric local

space heaters

Model identifier(s): STHL 2000 A1

Item Symbol Value Unit

Heat output

Nominal heat output Pnom 2.0 kW

Minimum heat

output (indicative) Pmin 1.2 kW

Maximum continuous

heat output Pmax,c 2.0 kW

Auxiliary electricity consumption

At nominal heat output elmax 0.000 kW

At minimum heat output elmin 0.000 kW

In standby mode elSB 0.000 kW

Item Unit

Type of heat input, for electric storage local

space heaters only (select one)

manual heat charge control, with

integrated thermostat [no]

manual heat charge control with room and/

or outdoor temperature feedback [no]

electronic heat charge control with room

and/ or outdoor temperature feedback [no]

fan assisted heat output [no]

Type of heat output/room temperature

control (select one)

single stage heat output and no room

temperature control [no]

Two or more manual stages, no room

temperature control [no]

with mechanic thermostat room

temperature control [no]

with electronic room temperature control [yes]

electronic room temperature control

plus day timer [no]

electronic room temperature control

plus week timer [no]

Other control options

(multiple selections possible)

room temperature control,

with presence detection [no]

room temperature control,

with open window detection [no]

with distance control option [no]

with adaptive start control [no]

with working time limitation [yes]

with black bulb sensor [no]

ROWI Germany GmbH

Werner-von-Siemens-Str. 27

76694 Forst

GERMANY

GB/IE/NI/MT/CY 9

2. Safety indications

Read all the safety indications and instructions.

Failure to adhere to the safety indications and instructions may

cause serious injuries and/or property damages.

Please keep all the safety indications and instructions for fu-

ture use.

2.1 General safety indications

Safety of electrical appliances for home use

This appliance can be used by children of 8 years and more as

well as by persons with reduced physical, sensory or mental abil-

ities or lacking experience and knowledge, if they are supervised

or are instructed in the safe use of the appliance and understand

the ensuing dangers. Children may not play with the appliance.

The cleaning and maintenance of the appliance by the user

may

not be carried out by children not under supervision.

No measures need be taken by the user to set the product to 50 or

60 Hz or 220 or 240 V. The product adjusts automatically to the

correct frequency or voltage.

If the supply cable for this appliance is damaged, it must be re-

placed by the manufacturer or his customer service or a similarly

qualified person in order to avoid any dangers.

GB/IE/NI/MT/CY10

2.2 Specific safety indications

Special requirements for room heating appliances

WARNING! Do not cover!

To avoid the heater overheating, it must not be covered.

The heater may not be placed directly beneath a wall mains socket.

Do not use this heater in the direct vicinity of a bathtub, a shower

or a swimming pool.

Do not commission an appliance which has been dropped.

Do not use if visible signs of damages can be seen on the heater.

The heater must be placed on a firm, flat and level base.

WARNING! The heater may not be used in small rooms where

people live who are not able to leave the room independently

unless constant monitoring is guaranteed.

WARNING! Fire danger! To reduce the danger of fire, keep tex-

tiles, curtains and other combustible materials at least 1 m away

from the air outlet.

Children of less than 3 must be kept away unless they are constantly

monitored.

Children between 3 and 8 may only switch the appliance on and

off if they are under supervision or have been instructed in the safe

use of the appliance and have understood the resulting dangers,

with the prerequisite that the appliance is placed or installed in

its normal operating position. Children between 3 and 8 may not

plug the plug into the mains socket, control the appliance, clean it

and/or not carry out user maintenance.

GB/IE/NI/MT/CY 11

Warning against hot surfaces!

ATTENTION: Some parts of the product may become extremely

hot and cause burns. Special care is required if children and vul-

nerable persons are present.

2.3 Additional safety indications

The appliance is only suitable for indoor operation.

Danger to life due to electrical current!

Danger to life in case of contact with live cables or components!

Before connecting the appliance, compare the connection data on

the name plate (voltage and frequency) with the data from your

electricity grid. Ensure that the data tallies so that no damages to

the appliance are incurred.

Never open the appliance’s casing. If live connections are touched

and/or the electrical and mechanical setup changed, the risk of

electric shock exists!

Ensure that the supply cable is not laid over hot surfaces and/or

sharp edges.

Pay attention that the supply cable is neither bent nor jammed.

Only have the appliance repaired by authorised specialist com-

panies or customer service. Inappropriate repairs may result in

considerable danger for the user. Moreover, the guarantee rights

become null and void.

Protect the appliance against damp and the penetration of liquids.

The appliance must not be sprayed.

Only remove the supply cable from the mains socket from the mains plug.

Do not operate the appliance in the vicinity of open flames.

Only operate the appliance with a fully unrolled supply cable.

GB/IE/NI/MT/CY12

Never wind the supply cable around the appliance. Ensure that the

supply cable does not come into contact with hot surfaces.

Lay the supply cable so that it is not possible to stumble over it.

2.4 Information about batteries

Keep out of the reach of children.

If swallowed, they may cause injuries and lead to the perforation

of soft tissue and ensuing death. Severe burns may be incurred

within 2 hours of intake. Consult a physician immediately.

Incorrect handling of batteries may cause fire, explosions, the leak-

age of hazardous substances or further hazardous situations!

Do not fling the batteries into a fire and do not subject them to high

temperatures.

Neither open, deform nor short-circuit batteries as this may cause

the chemicals they contain to escape.

Do not try to recharge batteries. Only batteries marked as

“rechargeable” may be recharged. There is danger of explosion!

Always remove rechargeable batteries from the appliance for

recharging.

Test the batteries regularly. Chemicals which leak may cause

long-term damages to the appliance. Be particularly careful when

handling damaged or leaking batteries.

Danger of chemical burn! Wear protective gloves.

Chemicals which leak from a battery may cause skin irritations.

In case of skin contact, rinse with ample water. If the chemicals

have come into contact with the eyes, always rinse them with

water, do not rub them and consult a physician immediately.

Neither use different battery nor rechargeable battery types nor

mix old and new batteries.

Always insert batteries with the correct polarity, because otherwise

the danger of bursting exists.

GB/IE/NI/MT/CY 13

Remove the batteries from the appliance if you do not wish to use

it for a longer period or wish to store it.

Insert the batteries using the correct polarity.

Do not allow children to replace the batteries without adult super-

vision.

Always select the correct size and battery type for the intended

use. The information provided with the appliance for supporting the

correct battery selection should be kept as a reference.

Clean the battery contacts and also the equipment’s contacts

before installing the battery.

Remove used batteries without delay and dispose of them in an

environmentally responsible manner.

Do not dismantle batteries.

If the battery compartment cover doesn’t close properly, do not

use the remote control any longer and keep it out of the reach of

children.

Avoid extreme conditions and temperatures which can influence

batteries / rechargeable batteries, e.g. placing them on radiators /

direct insolation.

GB/IE/NI/MT/CY14

3. Before commissioning (Tower fan

heater without remote control)

Remove all packaging material and transport

safety devices from the appliance. Check

whether the packing contents are complete and

undamaged.

3.1 Setting up the appliance

For safe, fault-free operation of the appliance,

its location must meet the following prerequi-

sites:

The base must be firm, flat and level.

Minimum clearance from the casing of 90 cm

at the side, 90 cm at the top, 90 cm at the back

and 1 m at the front must be adhered to.

Do not place the appliance in a hot, wet or very

wet surroundings or in the vicinity of combus-

tible material.

The mains socket must be easily accessible,

enabling easy removal of the supply cable if

necessary.

Temperature range: 0 to +40 ºC

Humidity (no condensation): 5–75 %

4. Commissioning (Tower fan heater

without remote control)

Note: For initial use or if not used for a longer

period, slight odours may arise in the short-term.

4.1 Standby mode

Connect the Tower heater blower to an earthed,

secured wall mains socket. To supply the appli-

ance with electricity, put the on/oﬀ switch 6

to position "I". The appliance is then in standby

mode and the display 1 shows the room tem-

perature.

4.2 Fan mode

Press the on/oﬀ key 5 once in standby mode.

The appliance is then in fan mode.

4.3 Heating level setting (heating mode)

Press the on/off key 5 once in fan mode. The

appliance is then in heating level 1. The tower

heater blower has a heat output of 1200 W.

The on/off key 5 is lit in blue.

Press the on/off key 5 again to change the

appliance to heating level 2. The tower heater

blower has a heat output of 2000 W. The on/

off key 5 is lit in red.

4.4 Switching the appliance off

If the appliance is in heating level 2, press

the on/off key

5

. The fan runs for a fur-

ther 60 seconds before going off (a count-

down is shown on the display). The appli-

ance returns to standby mode. The display

shows the room temperature.

Press 1x: Fan mode

Press 2x: Heating level 1 (1200 W)

Press 3x: Heating level 2 (2000 W)

Press 4x: Switch off (standby)

To disconnect the tower heater blower from the

electricity, put the on/off switch 6 to position

"O".

GB/IE/NI/MT/CY 15

4.5 Oscillation function

To switch the oscillation of the appliance

on or off, press the oscillation key 4 .

If successfully activated, the oscillation key icon

4 is lit.

The oscillation function has the effect that the air

blown off is distributed from the left to the right.

4.6 Temperature setting

Press the on/off key 5 once in standby

mode twice or three times.

Press the temperature key 2 to enter tempera-

ture setting mode.

Press the temperature key 2 repeatedly to

reach the temperature you desire (between 15

and 40 ºC).

After setting the desired temperature, wait 3 sec-

onds. The specification is assumed automatically.

If the temperature has been successfully set, the

temperature key icon 2 is lit .

The integrated thermostat now automatically

switches the heating function on/off.

ATTENTION! When setting the temperature, it must

be observed that the appliance does not heat if the

desired temperature is lower than room temperature

or equivalent to it. To heat, the temperature set must

be at least 1

ºC

higher than room temperature. This is

displayed automatically when you switch the remote

controller on.

4.7 Timer setting

The timer is used to switch the tower heat-

er blower off automatically. A switching

off time can be selected in hour steps with

the timer. The tower heater blower then

switches off automatically.

In fan or heating mode, press the timer key 3

repeatedly until you reach the desired number of

hours.

Repeated pressing of the timer key 3 sets the timer

to an hourly step:

If timer setting has been successful, the timer key

icon 3 is lit .

Example: Press the timer key 3 until “ ” can

be seen on the display, if the appliance should

automatically switch off after 4 hours. Wait for 3

seconds. The specification is assumed automatically.

The appliance will be switched off automatically in

4 hours.

If you wish to ensure that the timer specification has

been accepted, press the timer key 3 once. ” ”

or your specification is shown on the display.

NOTE: If you set the on/off switch 6 to “O” po-

sition or if the tower heater blower is disconnected

from the electricity supply, the timer and temperature

you have programmed are deleted.

5. Before commissioning tower fan

heater with remote control

5.1 Remote control: Inserting/changing the

battery

When supplied, a lithium coin cell 16 is includ-

ed with the remote control. In order to enable

operation of the remote control, remove the

plastic tape which protrudes out of the battery

compartment 14 (see Image 1).

If the battery in the remote control has to be re-

placed, insert a new 3 volt lithium coin cell. Pay

attention to the lithium coin cell type (CR2025)

here.

1

GB/IE/NI/MT/CY16

Press the lock 15 on the remote controller bat-

tery compartment 14 to the centre. Then, pull

the battery compartment 14 out (see Image 2).

Remove the used battery 16 .

Insert a new type CR2025 3 volt lithium coin

cell using the correct polarity.

Slide the battery compartment 14 back into the

remote controller until the lock 15 clicks into po-

sition.

6. Commissioning (Tower fan heater

with remote control)

6.1 Standby mode

Connect the Tower heater blower to an

earthed, secured wall mains socket. To

supply the appliance with electricity,

put the on/off switch 6 to position "I".

The appliance is then in standby mode

and the display 1 shows the room

temperature.

6.2 Fan mode

Press the on/oﬀ key 7 once in standby mode.

The appliance is then in fan mode.

6.3 Heating level setting (heating mode)

Press the heating level key 13 once in fan

mode. The appliance is then in heating

level 1. The tower heater blower has a

heat output of 1200 W. The on/oﬀ key

5 is lit in blue.

Press the heating level key 13 to change the

appliance to heating level 2. The tower heater

blower has a heat output of 2000 W. The on/

oﬀ key 5 is lit in red.

6.4 Switching the appliance off

Press the on/oﬀ key 7 once to switch the appli-

ance oﬀ. The fan runs for a further 60 seconds

before going oﬀ (a countdown is shown on

the display). The appliance returns to standby

mode. The display shows the room temperature.

To disconnect the towerheater blower from the

electricity, put the on/oﬀ switch 6 to position

"O".

6.5 Oscillation function

To switch the oscillation of the appliance

on or off, press the oscillation key 12 .

If successfully activated, the oscillation key icon

4 is lit.

The oscillation function has the effect that the air

blown off is distributed from the left to the right.

2

GB/IE/NI/MT/CY 17

6.6 Temperature setting

Press the temperature key 8 to enter

temperature setting mode.

Press the plus key 9 repeatedly to

increase the temperature you desire.

Press the minus key 10 repeatedly to

reduce the temperature you desire. You

can select a temperature between 15

and 40 ºC.

After setting the desired temperature, wait

3 seconds. The specification is assumed

automatically.

If the temperature has been successfully set, the

temperature key icon 2 is lit.

The integrated thermostat now automatically

switches the heating function on/off.

ATTENTION! When setting the temperature, it must

be observed that the appliance does not heat if the

desired temperature is lower than room temperature

or equivalent to it. To heat, the temperature set must

be at least 1 ºC higher than room temperature. This

is displayed automatically when you switch the

remote controller on.

6.7 Timer setting

The timer is used to switch the tower heater

blower off automatically. A switching off

time can be selected in hour steps with

the timer. The tower heater blower then

switches off automatically.

In fan or heating mode, press the timer

key 11 to set the timer.

Press the plus key 9 repeatedly or the minus

key 10 to set the switching off time you desire

After setting the switching off time, wait

3 seconds. The specification is assumed

automatically.

The timer can be set to an hourly step:

If timer setting has been successful, the timer key

icon 3 is lit.

If you wish to ensure that the timer specification has

been accepted, press the timer key

11

once. Your

specification is shown on the display.

NOTE: If you set the on/off switch 6 to “O”

position or if the tower heater blower is disconnected

from the electricity supply, the timer and temperature

you have programmed are deleted.

7. Protective devices for the appliance

7.1 Overheating protection

This appliance is equipped with overheating protection.

If the appliance becomes too hot, the heating element

is automatically switched off. To switch the appliance

off, set the on/off switch

6

to “

O

” and unplug the

mains plug from the mains socket. Let the appliance

cool down for at least 10 minutes.

ATTENTION! There’s normally a reason

for overheating! It can mean fire danger!

Check whether the appliance can give off its heat

sufficiently: Is the appliance covered or is it too close

to an obstacle? If possible, rectify the problem. Even

if you cannot find a cause, but overheating protection

is triggered again, you must switch the appliance

off and revert to the service hotline (see chapter

“Service”).

7.2 Tip-over protection

This appliance is equipped with overturning

protection. If the appliance is accidentally knocked

over or subjected to significant inclination during

operation, it is automatically switched off. The

appliance works exclusively in an upright position.

GB/IE/NI/MT/CY18

8. Maintenance, cleaning and storage

Always unplug the mains cable when the

appliance is not in use, prior to each cleaning

or in case of operational faults!

Only clean the appliance when switched off

and cold.

Ensure when cleaning that no moisture ingresses

into the appliance in order to avoid irreparable

damages to the appliance.

Clean the casing with a slightly damp cloth

and a mild flushing fluid. Do not use aggressive

and/or abrasive cleaning agents under any

circumstances whatsoever.

Remove dust deposits on the protective mesh and

on the ventilation louvres with a vacuum cleaner.

9. Disposal

The packaging consists of environmental-

ly friendly materials which you can dis-

pose of via local recycling points.

The product and packaging materials

are recyclable, dispose of it separately

for better waste treatment. The Triman

logo is valid in France only.

This product is subject to the European

Directive 2012/19/EU. Do not dis-

pose of the product with domestic

waste, but via local collecting points

for material recycling! You can ask your

municipal administration or city administra-

tion regarding the options for disposing of

the used appliance.

Batteries must be recycled in accordance

with Directive 2006/66/EC and may

not be disposed of with domestic waste.

Each consumer is legally obliged to re-

turn all batteries/rechargeable batteries

to a collection point in his municipality/

district or to the trade. This duty serves to

ensure that batteries/rechargeable bat-

teries can be directed to environmentally

friendly disposal. Only return batteries/

rechargeable batteries which are not

charged Batteries must be removed from

the

appliance prior to disposal.

Observe the markings on the packaging

materials when separating the waste,

they are marked with abbreviations (a)

and numbers (b) with the following

meanings: 1–7: Plastics/ 20–22: Paper

and cardboard/80–98: Composite ma-

terials.

10. EU conformity

The tower heater blower meets the re-

quirements of the valid European and

national regulations.

11. Guarantee from

ROWI Germany GmbH

Dear customer,

we grant you 3 years’ guarantee from the date of

purchase for this appliance. In case of any faults

with this product, you are entitled to make use of

your legal rights vis-à-vis the seller of the product.

These legislative rights are not restricted by our guar-

antee defined below.

Guarantee conditions

The period of guarantee begins with the date of

purchase. Please keep the original receipt in a safe

place. It is required as proof of purchase.

If a material or manufacturing fault occurs within

three years of the purchase date of this product, we

will - at our discretion - either repair it free of charge,

replace it or reimburse you the purchase price. This

guarantee assumes that the faulty appliance and

the proof of purchase (receipt) are presented within

the three-year-period and a brief written description

is provided as to the fault which exists and when it

occurs.

GB/IE/NI/MT/CY 19

If the fault is covered by our guarantee, you will re-

ceive the repaired product or a new product back.

No new guarantee period begins with the repair or

replacement of the product.

Guarantee period and statutory claims for

defects

The guarantee period is not extended by the war-

ranty. This also applies to replaced and repaired

parts. Any damages and faults which exist when

purchased must be notified without delay after un-

packing. Repairs required after the period of guar-

antee are subject to payment.

Scope of the guarantee

The appliance was produced with due care in ac-

cordance with strict quality guidelines and diligently

examined prior to delivery.

The guarantee service is applicable for material or

manufacturing errors. This guarantee neither extends

to product parts subject to normal wear and tear

which can therefore be viewed as wear and tear

parts nor to damages to fragile parts, e.g. switches,

rechargeable batteries or parts consisting of glass.

This guarantee becomes null and void if the product

has been damaged, not used or serviced correctly.

For correct use of the product, all the instructions list-

ed in the operating instructions must be adhered to

precisely. Designated use and actions against which

the operating instructions warn or against which

warnings are given must absolutely be avoided.

The product is only intended for private and not for

commercial use. In case of abusive and incorrect

treatment, use of force and in case of intervention

which has not been made by our authorised service

subsidiary, the guarantee becomes null and void.

Processing in guarantee cases

In order to ensure fast processing of your concern,

please observe the following information:

Please keep the receipt and article number

(IAN 367685_2101) on hand as a proof of

purchase for all inquiries.

You can find the article number on the name

plate on the product, the front page of your

instructions (on the bottom left-hand side) or

on the sticker on the reverse or underneath the

product.

Should you incur functional or other faults,

please first contact the service department

named below by phone or via E-mail.

You can then send a product recorded as being

faulty together with the proof of purchase (re-

ceipt) and the information as to what fault exists

post-paid to the service address we provide you

with.

You can download this and several further manu-

als, product videos and installation software from

www.lidl-service.com You can access the Lidl ser-

vice page (www.lidl-service.com) directly with this

QR code and open your operating instructions by

entering the article number (IAN 367685_2101).

GB/IE/NI/MT/CY20

12. Service

Should you incur any problems when operating your

ROWI Germany product, please do the following:

Making contact

You can reach the ROWI Germany service team

under:

ROWI Germany GmbH

Werner-von-Siemens-Str. 27

D-76694 Forst

GERMANY

lidl-services@rowi-group.com

Service hotline: +49 800 7694 7694

(free from landlines)

IAN 367685_2101

Most problems can already be resolved by compe-

tent, technical advice from our service team.

La page charge ...

Silvercrest Tower Fan Heater STHL 2000 A1 Mode d'emploi

Silvercrest Tower Fan Heater STHL 2000 A1 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents