iStorage DATASHUR BT Hardware Encrypted USB 3.2 Flash Drive Manuel utilisateur

www.istorage-uk.com

iStorage datAshur® BT Personal User Manual / Manuel d’utilisation / Benutzerhandbuch – v 1.9

English User Manual - Table of Contents ...............................................4

Français Manuel d’utilisation - Table des matières ...............................29

Deutsch Benutzerhandbuch - Inhaltsverzeichnis ...................................54

Personal

#2

iStorage datAshur® BT Personal User Manual / Manuel d’utilisation / Benutzerhandbuch – v 1.9

www.istorage-uk.com

If you are having difﬁculty please refer to this complete user manual loaded on your datAshur BT drive and is also

available on our website: https://istorage-uk.com/product-documentation/

USER MANUAL

Personal

#3

www.istorage-uk.com

iStorage datAshur® BT Personal User Manual / Manuel d’utilisation / Benutzerhandbuch – v 1.9

iStorage datAshur is developed and

manufactured by iStorage Limited and is

based on DataLock® technology licensed

from ClevX, LLC.

iStorage datAshur BT is manufactured by

iStorage Ltd. and is using DataLock® technology

licensed from ClevX, LLC. U.S. Patent.

www.istorage-uk.com/clevx-patents

All trademarks and brand names are the property of their

respective owners

Windows is a registered trademark of Microsoft Corporation.

All other trademarks and copyrights referred to are the property of their respective owners.

Distribution of the work or derivative work in any standard (paper) book form for commercial purposes is prohibited unless

prior permission is obtained from the copyright holder.

DOCUMENTATION IS PROVIDED AS IS AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND

WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD

TO BE LEGALLY INVALID

iStorage shall not be liable by virtue of this warranty, or otherwise, for any incidental, special or consequential damage

including any loss of data resulting from use or operation of the product, whether or not iStorage was apprised of the

possibility of such damages

EMI Cautions

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Cautions

Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to

operate this device. The normal function of the product may be disturbed by strong Electro-Magnetic Interference. If so,

simply reset the product to resume normal operation by following the instruction manual. In case the function could not

resume, please use the product in other location.”

This device complies with part 15 of the FCC Rules and with Industry Canada License-exempt RSSs. Operation is subject to

the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any

interference received, including interference that may cause undesired operation.

RF Exposure Statement

The device has been evaluated to meet general RF exposure requirement.

#4

iStorage datAshur® BT Personal User Manual / Manuel d’utilisation / Benutzerhandbuch – v 1.9

www.istorage-uk.com

Table of Contents

Introduction .................................................................................................................................. 5

Package contents .......................................................................................................................... 5

1. datAshur BT Layout ................................................................................................................ 6

2. Drive LED Indicators and their actions .................................................................................... 6

3. App Icons Description ............................................................................................................. 7

4. Download and Install datAshur BT Personal App ................................................................... 7

5. First Time Use ......................................................................................................................... 8

6. How to change the Password ................................................................................................. 8

7. How to Unlock datAshur BT .................................................................................................... 9

8. How to Lock datAshur BT ....................................................................................................... 9

9. How to access drive Settings Menu ........................................................................................ 9

10. How to Change name of the drive ........................................................................................... 10

11. How to enable 2-Factor Authentication .................................................................................. 10

12. Enabling drive Password Recovery ......................................................................................... 11

13. How to Recover a Forgotten drive Password ........................................................................... 12

14. Remember Password .............................................................................................................. 12

15. How to Activate Biometric Unlock ........................................................................................... 13

16. Unlock drive with Apple Watch ................................................................................................ 13

17. How to set the Inactivity AutoLock .......................................................................................... 14

18. How to activate Step-away AutoLock ....................................................................................... 14

19. Setting datAshur BT as Read-Only .......................................................................................... 15

20. How to enable Remote Wipe ................................................................................................... 15

21. How to Remote Wipe your lost/stolen datAshur BT ................................................................. 16

22. How to Add Additional drives to your Existing datAshur BT Personal App .............................. 16

23. How to Remove a Paired drive from the datAshur BT Personal App ........................................ 18

24. How to Reset datAshur BT ....................................................................................................... 19

25. Brute Force Hacking Detection ................................................................................................ 20

26. How to create a Password after Brute Force Attack or Reset .................................................... 20

27. Formatting datAshur BT for Windows ..................................................................................... 21

28. Formatting datAshur BT for Mac OS ....................................................................................... 22

29. Technical Support ................................................................................................................... 25

30. Warranty and RMA information ............................................................................................... 25

#5

www.istorage-uk.com

iStorage datAshur® BT Personal User Manual / Manuel d’utilisation / Benutzerhandbuch – v 1.9

Introduction

Thank you for purchasing the datAshur BT, a hardware encrypted USB 3.2 Gen 1 ﬂash drive that utilises mobile phone

technology via Bluetooth and turns your (iOS/Android) Smartphone or wearable device (Apple Watch) into a wireless

user-authentication device that enables secure access to data stored on your datAshur BT hardware encrypted ﬂash drive.

The datAshur BT uses military grade AES-XTS 256-bit hardware encryption (full disk encryption), which encrypts all data

stored on the drive in real-time.

Package contents

• iStorage datAshur BT

• QSG - Quick Start Guide

Caution: The datAshur BT is shipped with a default Password of 11223344 and although it can be used

straight out of the box with the default Password, for security reasons, we highly recommend that a

new Password be created immediately by following instructions under section 6 ‘How to change

the Password’.

#6

iStorage datAshur® BT Personal User Manual / Manuel d’utilisation / Benutzerhandbuch – v 1.9

www.istorage-uk.com

1. datAshur BT Layout

2. Drive LED indicators and their actions

drive LEDs LED State Description

All LEDs blink once datAshur BT conducts a self test when plugged to a computer

Solid Red Locked - but not connected to the datAshur BT App

Blinking Red Locked - but not connected to the datAshur BT App

Solid Blue datAshur BT is unlocked

Blinking Blue datAshur BT is unlocked and data transfer in progress

#7

www.istorage-uk.com

iStorage datAshur® BT Personal User Manual / Manuel d’utilisation / Benutzerhandbuch – v 1.9

3. App Icons Description

4. Download and Install datAshur BT Personal App

App Icons Description

datAshur BT is Blank.

datAshur BT is Locked.

datAshur BT is Unlocked.

Pair additional drives with existing datAshur BT Personal App.

datAshur BT is connected to the datAshur BT Personal App and authenticated.

Help Center

Change the Password.

Touch ID.

Face ID.

App will remember the Password.

Inactivity AutoLock.

Step-away AutoLock.

Read-Only Mode.

Enable Apple Watch.

Password Recovery.

Remote Wipe.

Reset.

Download and install the datAshur BT Personal App from the Apple App Store or Google

Play and then follow the instructions as described in section 5 ‘First Time Use’.

Please ensure Bluetooth® is enabled on your phone.

Scan the barcode from your iOS or Android device to download and install the

datAshur BT Personal App.

#8

iStorage datAshur® BT Personal User Manual / Manuel d’utilisation / Benutzerhandbuch – v 1.9

www.istorage-uk.com

Password requirements:

• Must be between 7-15 characters in length

• Must not contain only repetitive numbers or letters, e.g. (3-3-3-3-3-3-3), (c-c-c-c-c-c-c)

• Must not contain only consecutive numbers or letters, e.g. (1-2-3-4-5-6-7), (7-6-5-4-3-2-1), (a-b-c-d-e-f-g)

6. How to change the Password

5. First Time Use

The datAshur BT drive is shipped with a default Password of 11223344 and although it can be used straight out of the box

with the default Password, for security reasons we highly recommend a new Password be created

immediately by following the instructions under section 6 ‘How to change the Password’.

Once you have installed the datAshur BT Personal App (Android or iOS - see section 4), follow the steps in the table below to

pair your drive to the App and unlock with the default Password.

NOTE: If a mistake was made while deﬁning a new Password or the procedure was not completed, the drive will retain

the old Password.

First Time Use App drive LED

1. Make a note of the Device ID number printed on the USB connector and

connect the datAshur BT drive to a powered USB port.

2. Open the datAshur BT Personal App and tap on the

drive name - ‘datAshur BT’.

3. Enter the ‘Device ID’ number printed on the USB connector and tap OK.

Note: If you have already noted down the Device ID number, ignore the message to

unplug your drive and proceed to enter the Device ID number.

4. Tap on the RED padlock after initialization is complete.

5. Enter your default Password (11223344) and tap the padlock to unlock

your datAshur BT drive.

GREEN padlock ( ) on the App and solid Blue ( ) LED on your datAshur BT indicates the drive is unlocked and ready to

be used.

How to change the Password App drive LED

1. Connect your datAshur BT drive to a powered USB port and then open the

datAshur BT Personal App.

2. With the App open, tap on the RED padlock.

3. Enter your Password (default - 11223344) and tap the padlock to

unlock.

4. Tap on the GREEN padlock.

5. Tap on ‘Change Password’ and then proceed to change the Old

Password to a New 7-15 character Password.

#9

www.istorage-uk.com

iStorage datAshur® BT Personal User Manual / Manuel d’utilisation / Benutzerhandbuch – v 1.9

7. How to Unlock datAshur BT

8. How to Lock datAshur BT

To lock your datAshur BT drive directly from the datAshur BT Personal App, swipe the GREEN padlock ( ) to the left and tap

Lock or safely eject your datAshur BT drive from your computer and unplug from USB port.

9. How to access drive Settings Menu

The drive Settings menu allows you to conﬁgure your datAshur BT with a range of security features as seen below.

To access the drive Settings menu, ﬁrst unlock your datAshur BT as described in section 7 showing a GREEN padlock ( )

on the App and solid Blue ( ) LED on your datAshur BT drive.

How to unlock datAshur BT App drive LED

1. Connect your datAshur BT to a powered USB port and then open the datAshur

BT Personal App.

2. With the App open, tap on the RED padlock after initialization is complete.

3. Enter your Password and tap the padlock to unlock.

GREEN padlock ( ) on the App and solid Blue ( ) LED on your datAshur BT indicates the drive is unlocked and ready to

be used.

DRIVE SETTINGS

1. Change Name: Change the name of your drive.

2. Change Password: Change the drive Password.

3. 2-Factor Authentication: Unlock your drive with SMS

Code and Password.

4. Password Recovery: When you forget your Password.

5. Remember Password: Switch ‘Remember Password’

to ‘ON’ to unlock without entering your drive Password.

6. Activate Face ID: Unlock your drive using

iOS Face ID.

7. Inactivity AutoLock: Set the drive to automatically Lock

after a set time when idle.

8. Step-away AutoLock: Set the drive to AutoLock when

your App (on Smartphone) is 5 metres away from your

drive for 5 seconds or longer.

9. Read Only: Set the drive to ‘Read Only’ or ‘Read Write’.

10. Enable Apple Watch: Unlock your drive using Apple

Watch.

11. Reset drive: Will delete the encryption key, all data and

credentials.

12. Remote Wipe: If your drive is lost or stolen, activating

Remote Wipe will delete the encryption key, all data

and credentials.

#10

iStorage datAshur® BT Personal User Manual / Manuel d’utilisation / Benutzerhandbuch – v 1.9

www.istorage-uk.com

10. How to change name of the drive

To change the name of the drive from datAshur BT to your own unique name, ﬁrst unlock your datAshur BT as described in

section 7. Once the drive is unlocked showing a GREEN padlock ( ) on the App and solid Blue ( ) LED on your datAshur

BT, proceed with the following steps.

11. How to enable 2-Factor Authentication

With 2-Factor Authentication activated, each time you unlock your drive, a random SMS text message is sent to your

smartphone containing a conﬁrmation (security) code that you will need to enter on the datAshur BT Personal App.

To enable 2-Factor Authentication, ﬁrst unlock your datAshur BT as described in section 7. Once the drive is unlocked

showing a GREEN padlock ( ) on the App and solid Blue ( ) LED on your datAshur BT, proceed with the following steps.

How to enable 2-Factor Authentication App drive LED

1. Tap on the GREEN padlock

2. Tap the 2-Factor Authentication switch to ON and

then tap continue.

3. Enter your phone number, tap continue and

then tap to conﬁrm your phone number.

4. Once you have received the text message, enter your 6

digit conﬁrmation code, tap continue and OK the

2FA Enabled message.

5. To disable, switch OFF 2-Factor Authentication, and on

the ‘Turn off 2-Factor Authentication’ message, tap

Yes.

How to change name of the drive App drive LED

1. Tap on the GREEN padlock.

2. Tap on Change Name.

3. Tap on Change Local Name and enter your New Name.

4. Tap on Change Name to set new name.

#11

www.istorage-uk.com

iStorage datAshur® BT Personal User Manual / Manuel d’utilisation / Benutzerhandbuch – v 1.9

12. Enabling drive Password Recovery

Sometimes we forget our password, to overcome this, you can activate the drive Password Recovery service (recommended)

which will send a Recovery Code to your registered mobile number as a SMS text message to enable you to set up a new

drive password.

To enable drive Password Recovery, ﬁrst unlock your datAshur BT as described in section 7. Once the drive is unlocked

showing a GREEN padlock ( ) on the App and solid Blue ( ) LED on your datAshur BT, proceed with the following steps.

Enabling drive Password Recovery App drive LED

1. Tap on the GREEN padlock

2. Tap the Password Recovery switch to ON and

then tap continue.

3. Enter your phone number, tap continue and

then tap to conﬁrm your phone number.

4. Once you have received the text message, enter your 6

digit conﬁrmation code, tap continue and then OK

the Password Recovery Activated message.

5. To disable, switch OFF Password Recovery, and on

the ‘Disable Password Recovery’ message, tap

Conﬁrm.

#12

iStorage datAshur® BT Personal User Manual / Manuel d’utilisation / Benutzerhandbuch – v 1.9

www.istorage-uk.com

How to Recover a Forgotten drive Password App drive LED

1. Connect your datAshur BT to a powered USB port and then open the

datAshur BT Personal App.

2. With the App open, tap on the RED padlock after initialization is complete.

3. Tap on Forgot Your Password and then tap on YES to receive your

password recovery code by text message.

4. Enter the 6 digit Conﬁrmation Code received by text message and then

tap Continue.

5. Enter New Password, then Conﬁrm Password and ﬁnally tap on

Change Password.

Note: The Old Password ﬁeld is automatically populated and inactive.

6. Your datAshur BT will now automatically unlock with your new password.

13. How to Recover a Forgotten drive Password

You can recover a forgotten drive password only if the Password Recovery service has been activated as described in

section 12. To recover a forgotten drive password, proceed with the following steps.

14. Remember Password

When Remember Password is enabled, the datAshur BT Personal App will unlock your datAshur BT drive without the

need to enter a Password. Only use this feature in a safe environment and with extreme caution as your data

becomes vulnerable if set to remember the password.

To enable Remember Password, ﬁrst unlock your datAshur BT as described in section 7. Once the drive is unlocked

showing a GREEN padlock ( ) on the App and solid Blue ( ) LED on your datAshur BT, proceed with the following steps.

Remember Password App drive LED

1. Tap on the GREEN padlock

2. Tap the Remember Password switch to ON and

then tap YES.

3. To disable, switch OFF Remember Password.

#13

www.istorage-uk.com

iStorage datAshur® BT Personal User Manual / Manuel d’utilisation / Benutzerhandbuch – v 1.9

To activate your drive enabling you to unlock your datAshur BT using (iOS) Face-ID, ﬁrst unlock your datAshur BT as

described in section 7. Once the drive is unlocked showing a GREEN padlock ( ) on the App and solid Blue ( ) LED on

your datAshur BT, proceed with the following steps.

How to Activate Biometric Unlock App drive LED

1. Tap on the GREEN padlock.

2. Tap the Activate Face-ID switch to ON.

Note: Once Face ID is activated, you will be able to unlock your drive without entering your Password using Face ID.

15. How to Activate Biometric Unlock

Note: The App Biometric settings may vary from one device to another depending on the make and model of both iOS and

Android smartphones. Users with older smartphones that are not equipped with Biometric unlock will not see this as an

option on their datAshur BT Personal App. The Following is an example of ‘How to Activate Face ID’, similarly all other

Biometric settings can be activated in the same manner.

Unlock the drive with Apple Watch App drive LED

1. Tap on the GREEN padlock.

2. Tap the Activate Face-ID switch to ON.

3. Ensure the datAshur BT Personal App is installed on

your Apple Watch.

4. Tap Enable Apple Watch switch to ON.

5. Open the datAshur BT Personal App on your Apple

Watch.

Note: Your Password must contain digits (numbers) only to

unlock with Apple Watch. If your current Password contains

any letters then you will be redirected to the change the

Password by following the instructions under section 6 ‘How

to change the Password’.

16. Unlock the drive with Apple Watch

You will be able to Unlock and Lock

your datAshur BT drive directly from

your Apple Watch.

#14

iStorage datAshur® BT Personal User Manual / Manuel d’utilisation / Benutzerhandbuch – v 1.9

www.istorage-uk.com

17. How to set the Inactivity AutoLock

To protect against unauthorised access if the drive is unlocked and unattended, the datAshur BT can be set to

automatically lock after a pre-set amount of time. In its default state, the datAshur BT Unattended Inactivity AutoLock feature

is turned off (Never) but can be set to autolock between 1 - 60 minutes.

To set the Inactivity AutoLock, ﬁrst unlock your datAshur BT as described in section 7. Once the drive is unlocked

showing a GREEN padlock ( ) on the App and solid Blue ( ) LED on your datAshur BT, proceed with the following steps.

How to set the Inactivity AutoLock App drive LED

1. Tap on the GREEN padlock.

2. Tap on Inactivity AutoLock.

3. Tap on the length of time required (1-60 minutes) to

set your datAshur BT to automatically lock when

inactive.

4. To disable (turn off) Inactivity AutoLock, tap on Never.

18. How to activate Step-away AutoLock

If activated, the Step-away Autolock will lock your datAshur BT drive if your Smartphone (Android/iOS) is moved

approximately 5 meters away from the datAshur BT drive.

To activate Step-away AutoLock, ﬁrst unlock your datAshur BT as described in section 7. Once the drive is unlocked

showing a GREEN padlock ( ) on the App and solid Blue ( ) LED on your datAshur BT, proceed with the following steps.

How to activate Step-away AutoLock App drive LED

1. Tap on the GREEN padlock.

2. Tap the Step-away AutoLock switch to ON and

then tap Yes.

3. To disable (turn off) Step-away AutoLock tap the

switch Off.

#15

www.istorage-uk.com

iStorage datAshur® BT Personal User Manual / Manuel d’utilisation / Benutzerhandbuch – v 1.9

19. Setting datAshur BT as Read-Only

Your datAshur BT can be set as Read-Only (Write-Protected).

To set as Read-Only, ﬁrst unlock your datAshur BT as described in section 7. Once the drive is unlocked

showing a GREEN padlock ( ) on the App and solid Blue ( ) LED on your datAshur BT, proceed with the following steps.

Setting datAshur BT as Read-Only App drive LED

1. Tap on the GREEN padlock.

2. Tap the Read-Only switch to ON and

then tap LOCK.

Note: The drive will lock. Next time the drive is

unlocked access will be restricted to Read-Only.

3. To disable (turn off) Read-Only tap the

switch to Off and tap LOCK.

Note: The drive will lock. Next time the drive is

unlocked access will be back to Read/Write.

20. How to enable Remote Wipe

To prevent leaving critical data vulnerable should your datAshur BT Personal be lost or stolen, remote wipe safeguards

against this by allowing you to remotely wipe (delete) the encryption key, all data and credentials.

To enable Remote Wipe, ﬁrst unlock your datAshur BT as described in section 7. Once the drive is unlocked

showing a GREEN padlock ( ) on the App and solid Blue ( ) LED on your datAshur BT, proceed with the following steps.

How to enable Remote Wipe App drive LED

1. Tap on the GREEN padlock.

2. Tap the Remote Wipe switch to ON and

then tap ENABLE.

3. To disable (turn off) Remote Wipe tap the

switch Off and tap OK.

Caution: Do not remove (delete) the drive name from the list of paired drives on the datAshur BT Personal App or the

ability to wipe remotely (remote kill) will be no longer possible.

#16

iStorage datAshur® BT Personal User Manual / Manuel d’utilisation / Benutzerhandbuch – v 1.9

www.istorage-uk.com

21. How to Remote Wipe your lost/stolen datAshur BT

Remote wipe is an additional security feature that allows a datAshur BT owner to send a command that deletes the encryption

key, all data and credentials on a drive that has been lost or stolen. Once Remote Wipe has been activated, your datAshur BT

will reset, thereby deleting all data and credentials from the drive the next time it is connected to a computer by you or anyone

else.

Remote Wipe will only work if previously enabled as described in Section 20, ‘How to enable Remote Wipe’. To Remote Wipe

your datAshur BT, proceed with the following steps.

How to Remote Wipe App

1. Open your datAshur BT Personal App and make a note

of the serial number displayed beneath the drive

name.

2. Swipe the drive name ‘datAshur BT’ to the right and

then tap on Wipe.

3. Enter the Serial Number of the drive and then tap

Remote Wipe.

4. On the Remote Wipe Activated screen, tap OK.

The next time your datAshur BT is connected to a computer, the drive will reset causing all data and credentials to be

deleted and lost forever.

Warning: Once Remote Wipe has been activated, this action CANNOT be undone. If you proceed it will permanently delete

all data and credentials from your drive.

22. How to Add Additional drives to your Existing datAshur BT Personal App

You can add and authenticate multiple drives on the existing App. For instance, if you have two datAshur BT drives, you will

only need to use one App.

To add additional drives, proceed with the following steps.

#17

www.istorage-uk.com

iStorage datAshur® BT Personal User Manual / Manuel d’utilisation / Benutzerhandbuch – v 1.9

How to Add Additional drives to Existing App App drive LED

1. Make a note of the Device ID number printed on the

USB connector and connect the datAshur BT drive to

a powered USB port.

2. Open the App and tap on the Add symbol located on

the top-left of screen.

Note: You will see your existing (paired) datAshur BT drive

with the serial number beneath.

3. Enter the ‘Device ID’ number printed on the USB

connector and tap OK.

Note: If you have already noted down the Device ID number,

ignore the message to unplug your drive and proceed to

enter the Device ID number.

4. Tap on the RED padlock after initialization is complete.

Note: The App will show both (or more) paired drives. You

are able to unlock and use both drives at the same time if

need be.

5. Enter your default drive Password (11223344) and

tap the padlock to unlock your datAshur BT.

Important: For security reasons, please remember to

change the default drive Password to your own unique

7-15 character Password immediately as described in

section 6 ‘How to change the Password’.

Your datAshur will unlock showing a GREEN padlock ( ) on the App and solid Blue ( ) LED on your datAshur BT and

will need to be formatted before it can be used, refer to section 27 (Windows) or section 28 (Mac OS).

#18

iStorage datAshur® BT Personal User Manual / Manuel d’utilisation / Benutzerhandbuch – v 1.9

www.istorage-uk.com

23. How to Remove a Paired drive from the datAshur BT Personal App

To remove (delete) a paired drive from the App, proceed with the following steps.

How to Remove a Paired drive App drive LED

1. Open your datAshur BT Personal App and swipe the

drive name ‘datAshur BT’ to the right. This action can

be performed if the drive is locked ( ) or unlocked ( ).

2. Swipe the drive name ‘datAshur BT’ to the right and

then tap on Remove and then tap Remove again.

NOTE: You can pair your datAshur BT drive with the App again by following the instructions as set out in

section 5, ‘First Time Use’ or section 22 ‘How to Add Additional drives to your Existing datAshur BT Personal App’

if you have an existing drive paired to your datAshur BT Personal App.

#19

www.istorage-uk.com

iStorage datAshur® BT Personal User Manual / Manuel d’utilisation / Benutzerhandbuch – v 1.9

How to Reset datAshur BT App drive LED

1. Tap on the GREEN padlock

2. Make a note of the serial number displayed beneath

the drive name.

3. Tap Reset drive.

4. Tap Reset drive.

5. Enter the Serial Number of the drive and then tap

OK.

6. Your datAshur BT appears as Blank indicating that the

drive has been Reset. To create a new Password tap on

the Padlock.

7. Create and Conﬁrm your new Password and then tap

on Create Password.

Your datAshur will unlock showing a GREEN padlock ( ) on the App and solid Blue ( ) LED on your datAshur BT and

will need to be formatted before it can be used, refer to section 27 (Windows) or section 28 (Mac OS).

24. How to Reset datAshur BT

Once the datAshur BT is reset, the encryption key, data and credentials will be deleted and lost forever and the drive will need

to be formatted before it can be reused.

To reset your drive, ﬁrst unlock your datAshur BT as described in section 7. Once the drive is unlocked

showing a GREEN padlock ( ) on the App and solid Blue ( ) LED on your datAshur BT, proceed with the following steps.

#20

iStorage datAshur® BT Personal User Manual / Manuel d’utilisation / Benutzerhandbuch – v 1.9

www.istorage-uk.com

26. How to create a Password after a Brute Force Attack or Reset

It will be necessary after a Brute Force attack or when your datAshur BT has been reset to Create a new Password before the

drive can be used. To create a new password, proceed with the following steps.

How to create a new Password App drive LED

1. Your datAshur BT appears as Blank indicating that the

drive has been Reset or Brute Forced. To create a

new Password tap on the Padlock.

2. Create and Conﬁrm your new Password and then tap

on Create Password.

Your datAshur will unlock showing a GREEN padlock ( ) on the App and solid Blue ( ) LED on your datAshur BT and

will need to be formatted before it can be used, refer to section 27 (Windows) or section 28 (Mac OS).

25. Brute Force Hacking Detection

If an incorrect password is entered 10 (ten) consecutive times, the datAshur BT’s brute force mechanism will trigger and the

encryption key, all data and credentials will be deleted and lost forever.

A new password must be created, see section 26 ‘How to create a password after a Brute Force Attack or Reset’, and your

datAshur BT will need to be formatted before it can be reused.

La page est en cours de chargement...

iStorage DATASHUR BT Hardware Encrypted USB 3.2 Flash Drive Manuel utilisateur

Ce manuel convient également à

iStorage DATASHUR BT Hardware Encrypted USB 3.2 Flash Drive Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents