Amazon L5S83A Manuel utilisateur

Taper
Manuel utilisateur
User Manual
INSIDE THE BOX
Device
Power adaptor
USB Cable
CONNECTING DEVICE
1. To turn on your device, press and release the power button. To put it in sleep mode, press and
release the power button.
2. To turn off your device, press and hold the power button until a message displays asking if you
want to shut down.
3. Your device will be partially charged when you receive it. To charge your device, connect one end
of the USB cable into your device and the other end into the power adapter (included).
4. Connect the power adapter into a nearby power outlet.
CONNECTING DEVICE TO YOUR HOME NETWORK
Tap the quick setting icon located on the status bar to display settings for the most commonly performed
tasks
Select wireless network to toggle wireless on or off, display a list of detected Wi-Fi networks, add a
network, and access advanced wireless settings.
REGISTERING YOUR DEVICE
To use many of the device features, you must register it to your account. If you have not yet registered,
please do so now. Prior to registering, connect to a Wi-Fi network by tapping the Quick Setting icon at the
top of the device, then Wi-Fi. Select the network you want to use. Once you are connected, tap the Quick
Settings icon, then more, and select the My Account option to register.
Product Information
Safety and Compliance Information
Using Your Device Around Other Electronic Devices
The Device, uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its
instructions, may cause interference to radio communications and electronic equipment. External RF
signals may affect improperly installed or inadequately shielded electronic operating systems,
entertainment systems, and personal medical devices.
While most modern electronic equipment is shielded from external RF signals, if in doubt, check with the
manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with your
physician or the manufacturer to determine if they are adequately shielded from external RF signals.
There are some places where RF signals could constitute a hazard, such as health care facilities, and
construction sites. If you are not sure, look around for signs indicating that two-way radios or mobile
phones should be turned off.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Product Specifications
Equipment Name: Tablet
Model: L5S83A
Ports: Micro-USB, Audio port
Power DC 5.2V, 1.8A, or DC 5.25V, 1.0A or DC 5 V, 1A or DC 5V, 1.8 A output power adapter (sold in-box)
Operating Voltage 3.4V to 4.2 VDC
Connectivity Dual Band Wi-Fi (2.4 GHz&5 GHz); 802.11a/b/g/n; BT 3.0, BLE 4.2
Operating frequency WLAN 2.4GHz: 2402 - 2480 MHz; WLAN 5GHz: 5150 5250 MHz; 5250~5350 MHz;
5470~5725MHz; 5725~5825MHz; Bluetooth 3.0 / 4.2: 2402 2480 MHz
Operating temperature 0 °C to 35 °C
Remark: 5GHz band(W52,W53): Indoor use only
FCC Compliance Information Radio Frequency
Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications that are not expressly approved by the party responsible for compliance could
make the device no longer comply with the FCC Rules.
Information on your device is on file with the FCC and can be found by inputting your device’s FCC ID,
which can be found on the back of Device, into the FCC ID Search form available at
transition.fcc.gov/oet/ea/fccid
IC Compliance Information
Radio Frequency Information
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following
two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement."
The device could automatically discontinue transmission in case of absence of information to transmit,
or operational failure. Note that this is not intended to prohibit transmission of control or signaling
information or the use of repetitive codes where required by the technology.
This device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems.
Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une
utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites
mobiles utilisant les mêmes canaux.
Information Regarding Exposure to Radio Frequency Energy
This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé.
CAN ICES-3(B)/NMB-3(B)
Recycling Product Properly
In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of or
recycle the Products in accordance with your local laws and regulations. For information about
recycling the Products, go to www.amazon.com/devicesupport.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Amazon L5S83A Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues