Amazon H6Y2A5 Manuel utilisateur

Taper
Manuel utilisateur
1
User Manual
Model Number H6Y2A5
Product Information
Getting to know the device: Model H6Y2A5 is a device which supports all the video apps. It is a one-stop device for family
organization and entertainment in the kitchen. It integrates family information (reminders, appointments, to-dos, etc.) that
currently live in multiple locations in the home onto a single, centrally located display. It reduces reliance on the phone, improves
information flow within the family, and simplifies regular tasks like shopping, home control, and enjoying video entertainment in
the kitchen.
The device has Camera shutter and three buttons: Mic on/off, Volume + and Volume -.
Set up the device:
1. Plug the device into a power outlet. Use the included power adapter. In about a minute, the display will turn on.
2. Follow the on-screen setup. Log in with an existing account username and password or create a new account.
3. Download the latest version of the app. The app helps you get more out of your device. It’s where you setup calling and
messaging and manage music, lists, setting, and news.
Explore your device. To access setting and shortcuts, swipe down from the top edge of the screen. To access our widgets, in
landscape orientation, swipe left from the right edge of the screen. In portrait orientation, swipe up from the bottom edge.
Safety and Compliance Information, Using your device Around Other Electronic Devices
The device uses and can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause
interference to radio communications and electronic equipment. External RF signals may affect improperly installed or
inadequately shielded electronic operating systems, entertainment systems, and personal medical devices.
While most modern electronic equipment is shielded from external RF signals, if in doubt, check with the manufacturer. For
personal medical devices (such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine
if they are adequately shielded from external RF signals.
There are some places where RF signals could constitute a hazard, such as health care facilities, and construction sites. If you
are not sure, look around for signs indicating that two-way radios or mobile phones should be turned off.
Other Safety information
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.
Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting
your hands wet and wait for the device and adapter to dry completely before plugging them in again. Do not attempt to dry
your device or adapter with an external heat source, such as a microwave oven or a hair dryer. If the device or adapter appear
damaged, discontinue use immediately. Use only accessories supplied with the device to power your device. To avoid risk of
electric shock, do not touch your device or any wires connected to your device during a lightning storm.
To avoid unexpectedly coming into contact with the device, keep fingers and body clear of the device while it is in use.
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
2
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications that are not expressly approved by the party responsible for compliance could make the device no
longer comply with the FCC Rules.
Information on your device is on file with the FCC and can be found by inputting your device’s FCC ID, which can be found on
the back of Device, into the FCC ID Search form available at transition.fcc.gov/oet/ea/fccid.
The device can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference
to radio communications and electronic equipment. External RF signals may affect improperly installed or inadequately
shielded electronic operating systems, entertainment systems, and personal medical devices.
While most modern electronic equipment is shielded from external RF signals, if in doubt, check with the manufacturer. For
personal medical devices (such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine
if they are adequately shielded from external RF signals.
There are some places where RF signals could constitute a hazard, such as health care facilities, and construction sites. If you
are not sure, look around for signs indicating that two-way radios or mobile phones should be turned off.
Information Regarding Exposure to Radio Frequency Energy
The output power of the radio technology used in the Device is below the radio frequency exposure limits set by the FCC.
Nevertheless, it is advised to use the Device in such a manner that minimizes the potential for human contact during normal
operations.
Information on your device is on file with the FCC and can be found by inputting your device’s FCC ID, which can be found on
the back of Device, into the FCC ID Search form available at transition. fcc.gov/oet/ea/fccid. It is advised to use the wireless
equipment in such a manner that the potential for human contact during normal operation is minimized.
This device should be installed and operated with at least 20 cm between the radiator and your body.
Product Specifications
Model Number: H6Y2A5
Electrical Rating: 18VDC, 1.67A
Temperature Rating: 32°F to 95°F (0°C to 35°C)
Connectivity: Dual Band Wi-Fi (2.4/5GHz) 802.11 a/b/g/n/ac, Bluetooth, Bluetooth LE
3
ISED Compliance Information
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two
conditions:
1.This device may not cause interference; and
2.This device must accept any interference, including interference that may cause undesired operation
of the device.
Conformité Innovation Sciences et Développement Économique Canada (ISDE)
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux conditions suivantes:
1.l’appareil ne doit pas produire de brouillage; et
2.l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Information Regarding Exposure to Radio Frequency Energy
This device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems.
Les appareils fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement à une
utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites
mobiles utilisant les mêmes canaux.
This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment.
Renseignements relatifs l’exposition l’énergie des radiofréquences
Cet équipement est conforme aux limites d’exposition IC CNR-102 prévues pour environnements non
contrôlés.
This equipment should be installed and operated with minimum distance 20 cm between the radiator
and your body.
Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de
rayonnement et votre corps.
CAN ICES-3 (B)/NMB-3(B)
  • Page 1 1
  • Page 2 2
  • Page 3 3

Amazon H6Y2A5 Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues