User - Manual

Product Information

Product Specifications

Model Number: GA5Z9L

Electrical Rating: 12V VDC; 1.24 A

Operating temperature: 0°C to 35°C

Connectivity: Tri Band Wi-Fi (2.4 GHz / 5 GHz / 6E); 802.11 a/b/g/n/ac/ax; BT BDR/EDR, BLE.

- Power Adapter

- AAA Batteries

Activate Device:

Step 1: Connect the included power adapter to the device and plug into the power outlet.

Step 2: Use a HDMI Cable (not – included) to connect the HDMI Out port on the device to the HDMI Port of

the TV.

Step 3: Turn on your TV then select the input on your TV that matches the name of the HDMI port you

Step 3: If required, input password

Safety and Compliance Information

Using Your Device Around Other Electronic Devices

The Device, uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its

instructions, may cause interference to radio communications and electronic equipment. External RF

signals may affect improperly installed or inadequately shielded electronic operating systems,

There are some places where RF signals could constitute a hazard, such as health care facilities, and

construction sites. If you are not sure, look around for signs indicating that two-way radios or mobile

phones should be turned off.

FCC Compliance Information

Radio Frequency Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications that are not expressly approved by the party responsible for compliance could

make the device no longer comply with the FCC Rules.

Information on your device is on file with the FCC and can be found by inputting your device’s FCC ID,

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the

following two conditions:

2. This device must accept any interference, including interference that may cause undesired

operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts

1. l'appareil ne doit pas produire de brouillage, et

2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage

for harmful interference to co-channel mobile satellite systems.

Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une

utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de

satellites mobiles utilisant les mêmes canaux.

This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment.

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour