Hikvision C6 Manuel utilisateur

Taper
Manuel utilisateur
A
1
A Packing List
23456
H
Legal Statement H Legal Statement
HikDashcam C6
User Manual
©2020 Hangzhou HikAuto Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product.
Pictures, charts, images and all other informaon hereinaer are for
descripon and explanaon only. The informaon contained in the
Manual is subject to change, without noce, due to firmware updates
or other reasons.
Trademarks
and other Hikvision's trademarks and logos
are the properes of Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of
their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS
MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL
FAULTS AND ERRORS. HIKAUTO MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE
USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT
WILL HIKAUTO BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS
PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION
OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON
BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT
LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE
PRODUCT, EVEN IF HIKAUTO HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR
INHERENT SECURITY RISKS, AND HIKAUTO SHALL NOT TAKE ANY
RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,
VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,
HIKAUTO WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL
APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING
THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY,
YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT
DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING
WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL
PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY
RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED
END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF
WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY
ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR
UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS
ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATER PREVAILS.
FCC Informaon
Please take aenon that changes or modificaon not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference when the equipment is operated in a
residenal environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instrucons, may cause harmful interference to
radio communicaons. However, there is no guarantee that
interference will not occur in a parcular installaon. If this equipment
does cause harmful interference to radio or television recepon, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is subject
to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operaon.
EU Conformity Statement
This product and - if applicable - the supplied
accessories too are marked with "CE" and comply
therefore with the applicable harmonized
European standards listed under the RE Direcve
2014/53/EU, the EMC Direcve 2014/30/EU, the LVD Direcve
2014/35/EU, the RoHS Direcve 2011/65/EU.
2012/19/EU (WEEE direcve): Products marked
with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon
the purchase of equivalent new equipment, or dispose of it at
designated collecon points. For more informaon see:
www.recyclethis.info.
2006/66/EC (baery direcve): This product
contains a baery that cannot be disposed of as
unsorted municipal waste in the European Union.
See the product documentaon for specific baery
informaon. The baery is marked with this symbol, which may include
leering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For
proper recycling, return the baery to your supplier or to a designated
collecon point. For more informaon see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards
requirements.
This device complies with Industry Canada licence-exempt RSS
standard(s). Operaon is subject to the following two condions:
(1) this device may not cause interference, and
IRegulatory Informaon IRegulatory Informaon
The equipment should be installed and operated with a minimum
distance 20 cm between the radiator and your body.
IRegulatory Informaon
(2) this device must accept any interference, including
interference that may cause undesired operaon of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radioexempts de licence. L'exploitaon
est autorisée aux deux condions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'ulisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est suscepble d'en
compromere le fonconnement.
Under Industry Canada regulaons, this radio transmier may
only operate using an antenna of a type and maximum (or lesser)
gain approved for the transmier by Industry Canada. To reduce
potenal radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for
successful communicaon.
Conformément à la réglementaon d'Industrie Canada, le présent
émeeur radio peut
fonconner avec une antenne d'un type et d'un gain maximal (ou
inférieur) approuvé pour l'émeeur par Industrie Canada. Dans le
but de réduire les risques de brouillage radioélectrique à
l'intenon des autres ulisateurs, il faut choisir le type d'antenne
et son gain de sorte que la puissance isotrope rayonnée
équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à
l'établissement d'une communicaon sasfaisante.
This equipment should be installed and operated with a minimum
distance 20cm between the radiator and your body.
Cet équipement doit être installé et ulisé à une distance
minimale de 20 cm entre le radiateur et votre corps.
UD20619B
2
5
6
0
X
1
6
0
0
P
F
1
.
6
L
E
N
S
1
3
45
2
1.
2.
3.
4 .
5 .
2
5
6
0
X
1
6
0
0
P
F
1
.
6
L
E
N
S
Dashcam × 1
Car Charger × 1
Power Cord × 1
Electrostac Film × 1
User Manual × 1
BParts Introducon CInstallaon DMobile Phone Connecon E Funcon Descripon
7
FCauons
8
G
Troublshoong
9
G
Troubleshoong
10 11 12
Model
Aperture
Pixel
Resoluon
Angle
Screen
Storage
G-Sensor
Wi-Fi
Sound Recording
Power Supply
Power Consumpon
Operang Temperature and Humidity
Installaon Type
Dimensions (L × W × H)
Weight
AE-DC5313-C6
F1.6
320 × 640
1600p @ 30fps
130°
3”
TF card, 16 GB to 128 GB
Built-in, collision triggered recording and recording lock
Yes
Yes
5 VDC, 2 A
Approx. 3.5 W
-20 °C to 70 °C (-4 ̊F to 158 ̊F). Humidity 95% or less.
General
90 × 88 × 70 mm (3.6ʺ × 3.5ʺ × 2.8ʺ)
Approx. 125 g (0.3 lb.)
Scan QR Code
<
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
Specificaons
1
3
Clean the windshield and
paste the electrostac film
onto it.
Avoid introducing air bubble.
DO NOT paste the film
repeatedly.
Peel off the release paper of
3M tape and install the
dashcam onto the center of
the electrostac film. Connect
the dashcam with one end of
the power cord along the red
line shown in figure.
Connect the other end of
power cord to the car
charger and connect car
charger to cigaree lighter.
Adjust the surveillance angle
and the installaon is
completed. The lt adjusng
angle is from -10° to 10°.
Scan the QR code to download and
install HikDashcam app.
Add the dashcam to the app.
a. Run the HikDashcam app.
b. Tap Wi-Fi Connecon.
c. In Wi-Fi list, select the Wi-Fi SSID
of the target dashcam and enter
Wi-Fi password to build
connecon.
You can set the parameters of the
dashcam.
For iOS, you need to go to Wi-Fi
sengs of your phone to connect
to the Wi-Fi of dashcam.
Edit the dashcam password to
acvate it to avoid abnormal
recording aer connecng to Wi-Fi.
1
Dashcam Wi-Fi default parameters:
Wi-Fi SSID: HIKVISION-C6-XXXX
(XXXX refers to the last four
characters of verificaon code.)
Wi-Fi password: 1234567890
(please edit password aer logging in
for the first me.)
Power On and Power Off
Power On: When you start up the engine, the dashcam powers on.
Power Off: When you turn off the engine, the dashcam powers off.
Recording
Two recording types are provided: Normal Reording and Emergency
Recording. Sound and mute recordings are selectable. Sound recording is set
as default. You can set audio sengs on the device or turn off sound
recoding in app.
Safety Instrucon
These instrucons are intended to ensure that users can use the product
correctly to avoid danger or property loss.
Cauons: Injury or equipment damage may occur if any of the cauons are
neglected.
In the use of the dashcam, you must be in strict compliance with the local
laws and regulaons.
You are recommended to install the dashcam on the locaon of rear
mirror to ensure the dashcam can record with the best surveillance view.
DO NOT install the dashcam on the locaon that will block the driver’s sight.
Keep the user manual properly for future reference. See inial
connecon of dashcam in user manual.
Purchase the TF card from legal channel. To ensure safe and
stable data transmission, it is recommended to use TF card of
Class 10 or above.
Format the new TF card first before using the card.
To protect TF card from damage, shut down the dashcam before
installing and uninstalling TF card.
If the dashcam is directly connected with the vehicle power
system, you are recommended to power off the dashcam when
the engine is off. Disconnect cigaree lighter to avoid insufficient
voltage and abnormal startup. Reconnect cigaree lighter to
ensure dashcam work normally when you start the car again.
Operang temperature is from -20 ̊C to 70 ̊C (-4 ̊F to 158 ̊F). To
protect the dashcam, DO NOT use it in high temperature, low
temperature, or high-humidity environment. Keep the dashcam
from rain and dust.
The manual is subject to update. The funcons of dashcam may
vary according to different models.
*The driving assistance funcon of the device only sends alarm or warning to
the driver and cannot replace the driver’s judgement and operaon. With the
device, you also should drive carefully to avoid traffic accident or violaon.
Pedestrian or object recognion failure or recognion error may occur due to
external factors. DO NOT overly rely on the driving assistance funcon.
Trouble Soluon SoluonTrouble
The dashcam drops
easily.
Starng the dashcam
failed.
The dashcam powers
off easily.
Recording is
abnormal and
indicator is unlit.
Recording is blurred.
Recording is mute.
Dashcam reboots
itself.
Clean the windshield before installaon.
Check whether the vehicle is started and power
supply is normal.
Check whether the car charger is ghtly connected.
Restore to defaults: hold the RESET buon unl the
startup music is heard.
Make sure the power cord is in good condion.
Make sure the power cord is ghtly connected to the
according interfaces.
Make sure that the dashcam started up successfully.
Check whether the TF card is inserted.
Check the status of TF card, e.g. its format, its lifespan.
Change TF card if it is not well.
Make sure the protecve film is peeled off.
Check whether the windshield or the lens of dashcam
is blurred.
Set audio sengs on the device or turn on sound
recording in HikDashcam app.
Check whether the car charger is equipped with power
supply interface of 5 VDC, ≥ 2 A.
Mobile phone cannot
connect to dashcam.
Make sure HikDashcam app is installed.
Please restart the dashcam to the app.
The mobile phone
cannot display
recordings.
It may be relevant with the player or system of the
phone. Please connect TF card to your computer and
display the recordings.
TF card is not
detected when you
connect dashcam to
computer with the
supplied power cord.
Dashcam does not support data transmission and the
supplied power cord is only for charging.
If you need to transfer data, please connect TF card
to your computer.
Wi-Fi connecon
takes a long me.
It may be caused by the interferrence of the
surrounding Wi-Fi signals. Please use the dashcam in
an environment of less interferrence.
Shut down unnecessary programs in your phone to
release some resources for HikDashcam app and
reconnect Wi-Fi.
Dashcam Wi-Fi
password is forgoen.
The default password is 1234567890. If you have
revisied the password, regain the password by the
following steps.
1. Hold the RESET buon on dashcam unl the startup
music is heard and the dashcam is restored to
defaults.
2. Go to Wi-Fi Connecon interface in HikDashcam
app.
3. Select Wi-Fi SSID and log in with default password
1234567890.
1
2
3
Power Cord
Car Charger
Cigaree
Lighter
The power mode of cigaree lighter may vary by different vehicle
types. Some may be powered constantly. In this case, please
make sure that the dashcam stops aer you turn off the vehicle
engine. Otherwise, insufficient voltage may occur to vehicle baery.
Make sure you have connected the dashcam to power according to
Step 2 and Step 3 in Installaon secon.
·Check whether the car charger is ghtly connected.
13
4
8
9
7
1
2
3
5
2
5
6
0
X
1
6
0
0
P
F
1
.
6
L
E
N
S
1. Reset Buon
(Restore the device to defaults.)
2. TF Card Slot
3. Lens
4. Microphone
5. Speaker
7. Power Interface
8. MicroUSB Interface
(It can be extended as GPS
or 4G interface.)
9. Screen
10. Buons
4
10°
-10°
·Check whether the 3M tape is ghtly scked to the
electrostac film before the installaon.
·Turn on sound through the the audio control funcon
of the dashcam.
2
6
10
6. 3M Tape
  • Page 1 1
  • Page 2 2

Hikvision C6 Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues