Posiflex TX-5500E Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

1
TX-5300/5500
TX-5300E/5500E
Package Contents
TX-5300, TX-5300E,
TX-5500 or TX-5500E POS box………………..……...(x1)
12VDC/84W power adaptor (TX-5300/5500)
or 12VDC/150W power adaptor (TX-5300E/5500E).….(x1)
Power cord………………………………………….…...(x1)
Wall-mount bracket (optional)……………………….….(x1)
User manual……………………………………………..(x1)
14550901020 Ver. B0
http://www.posiflex.com
TX-5300/5300E/5500/5500E
Fanless POS Box
User Manual
2
SOME IMPORTANT NOTES
FCC NOTES
This system meets industry & government requirements and applicable standards.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions manual, may cause
interference to radio communications. It has been tested and found to comply with
limits for a Class A digital device pursuant to subpart B of Part 15 of FCC Rules,
which are designed to provide reasonable protection against interference when
operated in a commercial environment. Operation of this equipment in a residential
area is likely to cause interference in which case the user at his own expense will
be required to take whatever measures to correct the interference.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CE CLASS A WARNING
This equipment is compliant with Class A of CISPR 32. In a residential
environment this equipment may cause radio interference.
AVERTISSEMENT CE CLASSE A
Cet équipement est conforme à la classe A de CISPR 32. Dans un environnement
sidentiel, cet équipement peut provoquer des interférences radio.
WARRANTY LIMITS
Warranty will terminate automatically when the machine is opened by any person
other than the authorized technicians. The user should consult his/her dealer for the
problem happening. Warranty voids if the user does not follow the instructions in
application of this merchandise. The manufacturer is by no means responsible for
any damage or hazard caused by improper application.
LIMITES DE GARANTIE
La garantie prend fin automatiquement lorsque la machine est ouverte par une
personne autre que les techniciens autorisés. L'utilisateur doit consulter son
revendeur pour le probme qui se produit. La garantie s'annule si l'utilisateur ne
suit pas les instructions d'application de cette marchandise. Le fabricant n'est en
aucun cas responsable de tout dommage ou danger causé par une mauvaise
application.
警告使用者
這是甲類的資訊產品,在居住的環境中使用時,可能會造成射頻干擾,在
3
種情況下,使用者會被要求採取某些適當的對策。
SAFETY INSTRUCTIONS
This equipment is not suitable for use in locations where children are likely to be
present.
CONSIGNES DE SÉCURITÉ
Cet équipement ne convient pas à une utilisation dans des lieux pouvant accueillir
des enfants.
BATTERY CAUTION NOTES
Dispose of used batteries according to the instructions.
Replacement of a battery with an incorrect type that can defeat a safeguard
(for example, in the case of some lithium battery types)
Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of flammable
liquid or gas.
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
BATTERIE ATTENTION NOTES
Jetez les piles usagées conformément aux instructions.
Remplacement d'une batterie avec un type incorrect qui peut annuler une
sauvegarde (par exemple, dans le cas de certains types de batterie au lithium)
Mise au rebut d'une batterie dans le feu ou dans un four chaud, ou
écrasement ou coupure mécanique d'une batterie pouvant entraîner une
explosion.
Laisser une batterie dans un environnement environnant à des températures
extrêmement élevées pouvant entraîner une explosion ou la fuite de liquide
ou de gaz inflammable.
Une batterie soumise à une pression atmosphérique extrêmement basse
pouvant provoquer une explosion ou une fuite de liquide ou de gaz
inflammable.
警告
本電池如果更換不正確會有爆炸的危險,請依製造商說明書處理用過之電
池。
4
Views
Front View of TX-5300/5500
Front View of TX-5300E/5500E
Top View of TX-5300/5300E/5500/5500E
Power Button
USB 2.0 Port
Power Status LED Indicator
Storage Status LED Indicator
Power Button
Storage Status LED Indicator
Power Status LED Indicator
Powered USB Port
5
Bottom View of TX-5300/5300E/5500/5500E
Rear I/O Ports
TX-5300/5300E/5500/5500E
1
USB 3.0 port
2
RJ45 LAN port
3
VGA port
4
RJ11 cash drawer (CR) port
5
LPT port
6
HDMI port
7
COM port
8
12VDC-IN power jack
9
Mic-in / line-out combo jack
2
5
7
8
6
4
3
1
9
Rubber Pad
Rubber Pad
Service Door
6
Connecting Power Adapter and I/O Cables
To have the terminal ready for operation, please connect the
connector of power adapter and all of the connectors of required
I/O cables respectively to the 12VDC-IN power jack and
appropriate I/O ports. Please make sure that each of the cables is
fully connected to the correct port. Damages due to incorrect
connection or orientation are not covered by product warranty!
Some cable connectors like the connectors of LAN or cash
drawer (CR) cables have to be gently inserted until a click is
heard. It is recommended that the I/O ports, such as COM port,
parallel port, and VGA port, should be screwed after the I/O
cable connectors are completely connected. And please make
sure that each connector has to be connected to the right
peripheral device in the right way.
CAUTION: On doing insertion or extraction of a cable
connector, please always hold the connector head itself
instead of pulling the cable wire. Doing this could damage the
cables and ports, which is considered as an artificial damage
and is not covered by the warranty. The means of power cord
should be connected to a socket-outlet with earthing
connection.
Note: The COM ports of TX-5300/5300E/5500/5500E do not
supply power by default. To make the COM ports supply
power, you can set up the COM ports through the
dedicated settings listed in the table below.
The VGA port of TX-5300/5300E/5500/5500E can supply
+12VDC power through system BIOS setting for Posiflex
LCD monitor. Nevertheless, except Posiflex VGA monitor,
do not connect any other monitor to this port with VGA
power enabled.
TX-5300/5300E/5500/5500E
COM1/2/3/4
COM5/6
VGA
5VDC
12VDC
5VDC
12VDC
12VDC
BIOS Setting
V
V
V
Jumper Setting
V
V
7
Installing Optional Peripheral Devices
Posiflex TX-5300/5300E/5500/5500E can work with multiple
optional peripheral devices, such as LCD monitor, cash drawer
and the like.
Before installing an optional peripheral device, make sure that the
system is powered off and the external power source is removed
from the POS box to prevent electric hazard! Failure to follow the
warning description will void the product warranty!
For the detailed instruction, refer to each of the user manuals of
the optional peripheral devices.
Installing an Optional Second Storage (SSD)
The TX-series system is provided with a second storage bracket
for you to install an optional second storage. To avoid users from
damaging the main board of the system, it is highly
recommended that the optional second storage installation is
implemented by professional technicians.
Installing a Memory Upgrade Module
The TX-series system is provided with two DRAM slots for you
to expand or replace memory. Before shipping, one memory has
been inserted into one socket of the main board. To expand or
replace memory, follow the two steps below.
1. Loosen and remove the screw from the
service door.
2. Remove the service door.
To avoid users from damaging the main board of the system, it is
highly recommended that the memory expansion and replacement
are implemented by professional technicians.
8
Mounting the TX-5300/5300E/5500/5500E on the
Wall (Optional)
1. Fix the wall mount bracket onto the wall
by using attached plastic anchors and
four M3.5-16L screws.
2. Do spiral insertion of 4 M4-7L screw
bolts into the 4 screw bolt holes.
3. Lineup the 4 screw bolts to be inserted
into the 4 tracks. Then slide downwards
the system along the track until a click
sound is given for completely mounting
the system with the bracket on the wall.
For detailed installation description, please refer to the WB-4200
bracket installation guide.
Powering ON/OFF the POS Box
Power ON TX-5300/5300E/5500/5500E
Press down the power button to power on the TX-
5300/5300E/5500/5500E.
Power OFF TX-5300/5300E/5500/5500E
In most cases, push the power button again to
power the system off. However, if the POS box
halts for unknown reasons, please be advised to
hold the power more than 10 seconds to initiate a
forced shutdown.
9
Status LED Indicator
There are two status LED indicators, power status LED indicator
and SSD status LED indicator, on the front side of the TX-
5300/5300E/5500/5500E. After powering ON the POS system,
you can read the system operation status from the power and SSD
status LED indicators. The LED status is described below.
LED
Status
Description
POWER
Solid green
System power ON
Solid red
System standby
SSD
Flash green
Data access
Installing an Operating System
This product is highly professional equipment. Therefore, we do
NOT encourage you to install any operating system into this
machine without professional assistance. Posiflex Technology,
Inc. shall not be responsible for any technical support to
questions on this aspect. We suggest that you contact your dealer
for OS installation.
Operating System Recovery
For the TX-5300/5300E/5500/5500E main system preloaded with
an operating system, Posiflex provides a recovery DVD shipped
with the main system for the preloaded operating system. The
system integrator shall take care of software restoration after the
OS is recovered.
If you plan to recover your operating system, we do NOT
encourage you to recover any operating system. Please contact
your service center for operating system recovery.
Operation Environment
This terminal must NOT be operated in an environment with
restricted ventilation. There must be at least 25 mm air clearance
around any top or side ventilation holes with a free flow of air
around the unit at all times for system operation.
10
Specifications
TX-5300
TX-5300E
TX-5500
TX-5500E
CPU
Intel Coffee Lake-S CPU Core-i3
Intel® Coffee Lake-S CPU Core-i5,
Core-i7
Chipset
H310
Q370
Memory
DDR4 SO-DIMM x2, Max. 32GB
OS
Windows 10 IoT / Linux (by request)
VGA Port
VGA(DB15 pin) x 1 , supporting +12V/2.5A
HDMI Port
HDMI x 1
Serial Port
DB9 pin x 4 for COM1 ~ COM4
COM5 & COM6 pin header through service door
5 x RS-232(COM1, COM3~COM6) + 1 x RS-232/422/485(COM2)
Ethernet Port
10/100/1000 Mb x 2
Wireless Com.
Optional, 802.11 b/g/n with integrated antenna, M.2 module
Power Supply
12VDC power adaptor, 84W
12VDC power adaptor, 150W
Parallel Port
Parallel port(DB26 pin) x 1
CR Port
CR port x 1, controlling 2 cash drawers
USB Port
TX-5300/5500:
USB3.0 x 4 (on the rear I/O side)
USB2.0 x 3 (on the front side)
TX-5300E/5500E:
USB3.0 x 4 (on the rear I/O side)
24V Powered USB port x 1 (on the front side)
12V Powered USB port x 2 (on the front side)
Audio Port
MIC-in / line-out x 1 & 1 internal speaker
Storage
SATA x 2
M.2 2280 x 1 (SATA only)
SATA x 2
M.2 2280 x 1 (PCIe or SATA)
RAID Support
N/A
Yes, supporting for at least two
SSDs (Q370 only)
vPro Support
N/A
Yes (Q370 only)
Extension Slot
M.2 2230, reserved for M.2 WIFI w/external di-pole antenna
Power Switch
Soft switch
Mechanical
Installation
Desktop or wall mount, VESA mount 75 x 75
Wall-Mount
Bracket
Optional, WB-4200
11
TX-5300
TX-5300E
TX-5500
TX-5500E
LED Indicator
Front Panel:
Power on/ standby, bi-color LED indicators and storage LED indicator
Rear Panel:
Ethernet link LED on Ethernet connector
COM 5/6
Extension
Cable
Optional for COM 5/6 pin header inside service door
Operating
Condition
C - 40°C, 20%RH - 90%RH
Storage
Condition
-20°C - 70°C, 10%RH - 90%RH
The product information and specifications are subject to change without prior notice.
To get the detailed information on TX-5300/5300E/5500/5500E, please check this model
from Posiflex Global Website (http://www.posiflex.com/en-global/Download/download).
12
<MEMO>
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Posiflex TX-5500E Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues