Pioneer PDP-4280HD Manuel utilisateur

Operating Instructions | Mode d’emploi | Manual de instrucciones

PLASMA DISPLAY SYSTEM

SYSTEME D’ÉCRAN PLASMA

SISTEMA DE PANTALLA DE PLASMA

PDP -

5080HD

PDP -

4280HD

PDP5080HD.book Page 1 Monday, April 9, 2007 7:49 PM

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated "dangerous voltage" within the

product's enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

CAUTION:

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT

D3-4-2-1-1_En-A

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

1)

2)

3)

4)

5)

6)

7)

8)

9)

10)

Only use attachments/accessories specified by the

manufacturer.

Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

Unplug this apparatus during lightning storms or

when unused for long periods of time.

Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

11)

12)

13)

14)

WARNING: This equipment is not waterproof.

To prevent a fire or shock hazard, do not place any

container filed with liquid near this equipment

(such as a vase or flower pot) or expose it to

dripping, splashing, rain or moisture.

D3-4-2-1-3_A_En

WARNING: This product equipped with a three-

wire grounding (earthed) plug - a plug that has a third

(grounding) pin. This plug only fits a grounding-type

power outlet. If you are unable to insert the plug into an

outlet, contact a licensed electrician to replace the

outlet with a properly grounded one. Do not defeat the

safety purpose of the grounding plug

D3-4-2-1-6_A_En

WARNING: To prevent a fire hazard, do not place

any naked flame sources (such as a lighted candle) on

the equipment.

D3-4-2-1-7a_A_En

NOTE TO CATV SYSTEM INSTALLER

THIS REMINDER IS PROVIDED TO CALL THE CATV

SYSTEM INSTALLER’S ATTENTION TO ARTICLE

820-40 OF THE NEC THAT PROVIDES GUIDELINES

FOR PROPER GROUNDING AND, IN PARTICULAR,

SPECIFIES THAT THE CABLE GROUND SHALL BE

CONNECTED TO THE GROUNDING SYSTEM OF

THE BUILDING, AS CLOSE TO THE POINT OF

CABLE ENTRY AS PRACTICAL.

D1-4-2-8_En

This digital television is capable of receiving analog

basic, digital basic and digital premium cable

television programming by direct connection to a cable

system providing such programming. A security card

provided by your cable operator is required to view

encrypted digital programming. Certain advanced and

interactive digital cable services such as video-on-

demand, a cable operator’s enhanced program guide

and data-enhanced television services may require the

use of a set-top box. For more information call your

local cable operator.

VENTILATION CAUTION:

When installing this unit, make sure to leave space

around the unit for ventilation to improve heat

radiation. For the minimum space required, see page

16.

WARNING: Slots and openings in the cabinet are

provided for ventilation to ensure reliable operation of

the product, and to protect it from overheating. To

prevent fire hazard, the openings should never be

blocked or covered with items (such as newspapers,

table-cloths, curtains) or by operating the equipment

on thick carpet or a bed.

PDP5080HD.book Page 2 Monday, April 9, 2007 7:49 PM

English

Information to User

Alteration or modifications carried out without

appropriate authorization may invalidate the user’s

right to operate the equipment.

[For Canadian model]

This Class B digital apparatus complies with Canadian

ICES-003.

WARNING: Handling the cord on this product or

cords associated with accessories sold with the

product will expose you to chemicals listed on

proposition 65 known to the State of California and

other governmental entities to cause cancer and

birth defect or other reproductive harm.

D36-P4_A_En

Wash hands after handling

FEDERAL COMMUNICATIONS

COMMISSION DECLARATION OF

CONFORMITY

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

Product Name: Plasma Display System

Model Number: PDP-5080HD/PDP-4280HD

Product Category: Class B Personal Computers &

Peripherals

Responsible Party Name: PIONEER ELECTRONICS

SERVICE, INC.

Address: 1925 E. DOMINGUEZ ST., LONG BEACH,

CA 90801-1760, U.S.A.

Phone: 800-421-1625

URL : http://www.pioneerelectronics.com

STANDBY: When placed into the standby mode, the main power flow is cut and the unit is no longer

fully operational.

STANDBY/ON Indicator: The indicator is lit red when the unit is in the standby mode and lit blue when it is in the

power-on mode. No operation can be performed when the indicator is off. However, the

Plasma Display system will still consume some power as long as the power cord is

inserted into the power outlet.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

D8-10-1-2_En

CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the

unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and

televisions, use shielded cables and connectors for connections.

D8-10-3a_En

IMPORTANT NOTICE – THE SERIAL NUMBER FOR THIS EQUIPMENT IS LOCATED IN THE REAR.

PLEASE WRITE THIS SERIAL NUMBER ON YOUR ENCLOSED WARRANTY CARD AND

KEEP IN A SECURE AREA. THIS IS FOR YOUR SECURITY.

D1-4-2-6-1_En

CAUTION:

The  switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main

disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. Therefore, make sure the unit has been

installed so that the power cord can be easily unplugged from the AC outlet in case of an accident. To avoid fire hazard, the power cord

should also be unplugged from the AC outlet when left unused for a long period of time (for example, when on vacation)

D3-4-2-2-2a_A_En

Operating Environment

Operating environment temperature and humidity:

+0˚C to +40˚C (+32˚F to +104˚F); less than 85 %RH (cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light)

D3-4-2-1-7c_A_En

PDP5080HD.book Page 3 Monday, April 9, 2007 7:49 PM

4

En

Contents

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading

the instructions, put them away in a safe place for future reference.

In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory

drawings. However the method of connecting and operating the unit is the same.

Illustrations shown in this manual are for the PDP-5080HD unless otherwise specified.

Contents

01 Important User Guidance

Information ........................................... 7

02 Safety Precautions .............................. 10

Installation Precautions ............................11

03 Supplied Accessories........................... 12

04 Part Names........................................... 13

Plasma display ...........................................13

Remote control unit ...................................15

05 Preparation.......................................... 16

Installing the plasma display ....................16

Moving the plasma display .......................16

Installing the Pioneer speaker

(PDP-5080HD) ............................................16

When using the hung on wall unit: .....20

Preventing the plasma display from

falling over ..................................................21

Attaching/detaching the Pioneer

stand ...........................................................22

Cable connections for watching digital

and/or conventional TV channels .............24

Inserting the CableCARD™ .......................24

Routing cables ...........................................25

Connecting the power cord .......................25

Preparing the remote control unit ............26

Allowed operation range of the remote

control unit .............................................26

06 Basic Operations.................................. 27

Turning on the power .................................27

Turning off the power .................................27

Watching TV channels ...............................28

Selecting the antenna ...........................28

Changing channels ...............................28

Changing the volume and sound .........29

Changing the language ........................29

Setting MTS/SAP mode ........................30

Viewing a channel banner ....................31

Using the POD service ......................... 31

Using the multiscreen functions ............. 31

Splitting the screen .............................. 31

Freezing images ........................................ 32

07 TV Guide On Screen™ System

Setup .................................................... 33

About the TV Guide On Screen™

system ........................................................ 33

Setting up the TV Guide On Screen™

system ........................................................ 33

08 The HOME MENU..................................36

HOME MENU overview ............................. 36

Using the HOME MENU ........................... 36

09 Tuner Setup.......................................... 37

Setting up TV channels ............................. 37

Using Auto Channel Preset ................. 37

Setting for skipping unwanted

channels ................................................ 37

Setting up TV channels manually ........ 37

Checking signal strength ..................... 37

Checking the CableCARD™ ID ............ 38

Parental Control ........................................ 38

Changing the password ....................... 38

Clearing the password ......................... 39

Activating the Parental Control ........... 39

Setting the voluntary movie rating

system (MPAA) ..................................... 39

Setting the TV ratings ........................... 39

Setting the TV Parental Guidelines

(TV Guidelines) ...................................... 40

Blocking Not Rated TV programs ........ 40

Canadian rating systems ..................... 40

Setting Canadian English ratings ....... 41

Setting Canadian French ratings ........ 41

Setting new ratings ............................... 41

Deleting new ratings ............................ 42

Temporarily deactivating the Parental

Control ................................................... 42

PDP5080HD.book Page 4 Monday, April 9, 2007 7:49 PM

5

En

Contents

English

Setting your favorite channels ................. 43

Setting up closed captions ....................... 43

Activating the closed caption .............. 43

Selecting the type of conventional closed

captions ................................................. 43

Selecting digital closed captions ........ 43

Selecting digital closed caption

parameters ............................................ 44

Clock Setting ............................................. 44

10 TV Guide On Screen™ System

Operation .............................................45

Using the TV Guide On Screen™

system ....................................................... 45

Screen components ............................. 45

The Listings screen ................................... 46

Setting program reminders ...................... 46

Searching for programs ........................... 48

Searching by category .......................... 48

Searching by keyword .......................... 49

Alphabetical search ............................. 49

The search Episode Options menu ..... 50

Scheduling reminders .............................. 50

Using the reminder To Do list .............. 51

Changing setup options ........................... 51

Changing the system settings ............. 51

Changing the channel display

settings .................................................. 52

Changing the default options .............. 53

Displaying setup progress ................... 53

11 Adjustments and Settings ..................54

AV Selection .............................................. 54

Basic picture adjustments ....................... 55

Advanced picture adjustments ................ 55

Using PureCinema ............................... 55

Using the Picture Detail ....................... 56

Using Color Temp ................................. 56

Using CTI ............................................... 56

Eliminating noise from images ........... 56

Comparing picture adjustments on the

screen .........................................................57

Sound adjustments ...................................57

Power Control ............................................58

Energy Save ...........................................58

No Signal off (AV source only) .............58

No Operation off (AV source only) .......59

Power Management

(PC source only) ....................................59

Sleep Timer ................................................59

Image position adjustment

(AV source only) .........................................60

Automatic image position and clock

adjustments (PC source only) ..................60

Manual image position and clock

adjustments (PC source only) ..................60

Reducing video noise ................................61

Selecting a game mode ............................61

Selecting a screen size manually ............. 61

Selecting a screen size automatically .....62

Detecting side masks ................................ 62

Changing the brightness at both

sides of the screen (Side Mask) ............... 62

Room Light Sensor ....................................63

Blue LED Dimmer ...................................... 63

Orbiter .........................................................63

Video Pattern ..............................................63

Language setting .......................................63

12 Enjoying through External

Equipment ........................................... 64

About External Equipment ........................ 64

Watching a DVD image ............................64

Watching a VCR image .............................64

Using HDMI Input .....................................65

Enjoying a game console or watching

camcorder images .....................................67

Connecting other audio equipment .........67

Watching an image from a personal

computer ....................................................68

PDP5080HD.book Page 5 Monday, April 9, 2007 7:49 PM

6

En

Contents

Computer compatibility chart ...................68

Connecting control cords ..........................69

Enjoying through USB interface

(Home Gallery function) ............................70

Connecting a USB device .....................70

Removing a USB device .......................70

Starting the initial Home Gallery

screen .....................................................71

Starting a thumbnail screen .................71

Starting a standard single-image

screen .....................................................72

Starting the Slide Show Setup

screen .....................................................72

Starting the Slide Show screen ............73

13 Using the HDMI Control...................... 74

Using the HDMI Control functions ...........74

Making the HDMI Control

connections ................................................75

Setting the HDMI Control ..........................76

Using the HDMI Control menus ...............77

14 Useful Remote Control Features........ 78

Presetting manufacturer codes to control

other devices ..............................................78

Presetting manufacturer codes ...........78

Library Search ........................................78

Manufacturing Reset ............................78

Programming codes ............................79

Using the remote control unit to

control other devices .............................84

15 Appendix ............................................. 88

Troubleshooting .........................................88

Specifications .............................................98

PDP5080HD.book Page 6 Monday, April 9, 2007 7:49 PM

7

En

Important User Guidance Information

01

English

Chapter 1

Important User Guidance Information

In order to obtain maximum enjoyment from this Pioneer

PDP-5080HD/PDP-4280HD plasma display, please first read this

information carefully.

With the Pioneer PDP-5080HD/PDP-4280HD, you can be assured

of a high quality plasma display with long-life and high reliability.

To achieve images of exceptional quality, this Pioneer plasma

display incorporates state-of-the-art design and construction, as

well as very precise and highly advanced technology.

The Pioneer PDP-5080HD/PDP-4280HD incorporates the latest in

color filter technology – Direct Color Filter. This improves the

color/picture reproduction of these models as compared to

previous models. It also eliminates the need for a physical glass

panel to be placed in front of the plasma panel, which furthers

Pioneer’s continued goal of reducing environmental waste in

consumer electronics, now during the manufacturing process

and in the future during the recycling process.

Over the course of its lifetime, the luminosity of the Pioneer

PDP-5080HD/PDP-4280HD plasma display will diminish very

slowly, such as with all phosphor-based screens (for example, a

traditional tube-type television). To enjoy beautiful and bright

images on your Pioneer plasma display for many years to come,

please carefully read and follow the usage guidelines below.

Usage guidelines

All phosphor-based screens (including conventional tube-type

televisions) can be affected by displaying static images for a

prolonged period. Plasma displays are no exception to this rule.

After-image and permanent effects on the screen can be avoided

by taking some basic precautions. By following the

recommendations listed below, you can ensure longer and

satisfactory results from your plasma:

• Whenever possible, avoid frequently displaying the same

image or virtually still moving pictures (e.g. closed-captioned

images or video game images which have static portions).

• Avoid viewing the On Screen Display for extended periods,

from a DVD player, VCR, and all other components.

• Do not leave the same picture freeze-framed or paused

continuously over a long period of time, when using the still

picture mode from a TV, VCR, DVD player or any other

component.

• Images which have both very bright areas and very dark areas

side by side should not be displayed for a prolonged period of

time.

• When playing a game, the “GAME” mode setting within “AV

Selection” is strongly recommended. However, please limit its

use to less than two hours at a time.

• After playing a game, or displaying a PC image or any still

image, it is best to view a normal moving picture in the “WIDE”

or “FULL” screen setting for over three times longer than the

previous still/moving image.

• After using the plasma display, always switch the display to

“STANDBY” mode.

• Extensive viewing of content with top, bottom, or side masks

may cause uneven wear. After viewing masked content, it is

recommended to view full screen motion video for an equal or

greater amount of time.

Installation guidelines

The Pioneer PDP-5080HD/PDP-4280HD plasma display

incorporates a very thin design. To ensure safety, please take the

proper measures to mount or install the plasma display, in order

to prevent the unit from tipping over in the event of vibration or

accidental movement.

This product should be installed by using only parts and

accessories designed by Pioneer. Use of accessories other than

the Pioneer stand or installation bracket may result in instability,

and could cause injury. For custom installation, please consult

the dealer where the unit was purchased. To ensure correct

installation, experienced and qualified experts must install the

unit.

Pioneer will not be held responsible for accident or damage

caused by the use of parts and accessories manufactured by

other companies, inadequate installation or stabilization,

erroneous operation, remodeling or natural disasters.

To avoid malfunction and overheating when installing, make sure

that the vents on the main unit are not blocked. To ensure proper

heat emission:

• Distance the unit slightly from other equipment, walls, etc. For

the minimum space required around the unit, see page 16.

• Do not fit the unit inside narrow spaces where ventilation is

poor.

• Do not cover with a cloth, etc.

• Clean the vents on the sides and rear of the unit to remove dust

build-up by using a vacuum cleaner set to its lowest suction

setting.

• Do not place the product on a carpet or blanket.

• Do not leave the product tilted over.

• Do not invert the product.

Using the unit without proper ventilation may cause the internal

temperature to rise, and could result in possible malfunction.

When the surrounding or internal temperature exceeds a certain

degree, the display will automatically power off in order to cool

the internal electronics and prevent a hazardous occurrence.

Malfunction can be caused by many factors: inappropriate

installation site, improper assembly/installation/mounting,

improper operation of or modifications made to this product.

However, Pioneer cannot be held responsible for accidents or

malfunction caused by the above.

Note

The following are typical effects and characteristics of a

phosphor-based matrix display and as such, are not covered by

the manufacturer’s limited warranties:

• Permanent residual images upon the phosphors of the panel.

• The existence of a minute number of inactive light cells.

• Panel generated sounds, examples: Fan motor noise, and

electrical circuit humming / glass panel buzzing

PDP5080HD.book Page 7 Monday, April 9, 2007 7:49 PM

8

En

Important User Guidance Information

01

Caution

Pioneer bears no responsibility for any damage arising from

incorrect use of the product by you or other people, malfunctions

when in use, other product related problems, and use of the

product except in cases where the company must be liable.

Plasma display protection function

When still images (such as photos and computer images) stay on

the screen for an extended period of time, the screen will be

slightly dimmed. This is because the protection function of the

plasma display automatically adjusts the brightness to protect

the screen when detecting still images; so this does not

designate malfunction. The screen is dimmed when a still image

is detected for about three minutes.

Information of pixel defect

Plasma screens display information using pixels. Pioneer plasma

display panels contain a very large number of pixels. (Depending

on the panel size; over 2.3 million pixels in case of a 42 inch

display, over 3.1 million pixels in case of a 50 inch display). All

Pioneer display panels are manufactured using a very high level

of ultra-precision technology and undergo individual quality

control.

In rare cases, some pixels can be permanently switched off, or

on, resulting in either a black or colored pixel permanently fixed

on the screen.

This effect is common to all plasma displays because it is a

consequence of the technology.

If the defective pixels are visible at a normal viewing distance of

between 2.5 and 3.5 meters (8.2 and 11.5 feet) while viewing a

normal broadcast (i.e. not a test card, still image or single color

display) please contact Pioneer Customer Support Div. (USA) or

Customer Satisfaction Dept. (CANADA). See back cover.

If, however, they can only be seen close up or during single color

displays then this is considered normal for this technology.

Infrared rays

The plasma display releases infrared rays because of its

characteristics. Depending on how the plasma display is in use,

the remote controls of nearby equipment may be adversely

affected or wireless headphones using infrared rays are

interfered with by noise. If this is the case, place that equipment

at a location where its remote control sensor is not affected.

Radio interference

While this product meets the required specifications, it emits a

small amount of noise. If you place such equipment as an AM

radio, personal computer, and VCR close to this product, that

equipment may be interfered. If this happens, place that

equipment far enough from this product.

Plasma display driving sound

The screen of the plasma display is composed of extremely fine

pixels and these pixels emit light according to received video

signals. This principle may cause you to hear a buzz or electrical

hum coming from the plasma display.

Do not attach such items as labels and tape to the

product.

• This may result in the discoloration or scratch of the cabinet.

When not using the product for a long period of time

• If you do not use the product for a long period of time, the

functions of the product may be adversely affected. Switch on

and run the product occasionally.

Condensation

• Condensation may take place on the surface or inside of the

product when the product is rapidly moved from a cold place

to a warm place or just after a heater is switched on on a winter

morning, for example. When condensation takes place, do not

switch on the product until condensation disappears. Using

the product with condensation may result in malfunction.

Cleaning the surface of the screen and the glossy

surface of the front cabinet

• When cleaning the surface of the screen or the glossy surface

of the front cabinet, gently wipe it with a dry soft cloth; the

supplied cleaning cloth or other similar cloths (e.g., cotton and

flannel). If you use a dusty or hard cloth or if you rub the screen

hard, the surface of the product will be scratched.

• If you clean the surface of the screen with a wet cloth, water

droplets on the surface may enter into the product, resulting in

malfunction.

Cleaning the cabinet

• When cleaning the cabinet of this product, gently wipe it with

a clean soft cloth (e.g., cotton and flannel). If you use a dusty or

hard cloth or if you rub the cabinet hard, the surface of the

cabinet will be scratched.

• The cabinet of this product is mostly composed of plastic. Do

not use chemicals such as benzene or thinner to clean the

cabinet. Using these chemicals may result in quality

deterioration or coating removal.

• Do not expose the product to volatile gas or fluid such as

pesticide. Do not bring the product in contact with rubber or

vinyl products for a long period of time. The effect of plasticizer

in the plastic may result in quality deterioration or coating

removal.

• If you clean the surface of the cabinet with a wet cloth, water

droplets on the surface may enter into the product, resulting in

malfunction.

Handles at the rear of the plasma display

• Do not remove the handles from the rear of the plasma display.

• When moving the plasma display, ask another person for help

and use the handles attached to the rear of the plasma display.

Do not move the plasma display by holding only a single

handle. Use the handles as shown on page 16.

• Do not use the handles to hang the product when installing or

carrying the product, for example. Do not use the handles for

the purpose of preventing the product from tilting over.

PDP5080HD.book Page 8 Monday, April 9, 2007 7:49 PM

9

En

Important User Guidance Information

01

English

Fan motor noise

The rotation speed of the cooling fan motor increases when the

ambient temperature of the plasma display becomes high. You

may hear the sound of the fan motor at that time.

To use this product for a long period of time

Energy Save maintains efficiency of the screen for a long period

of time by decreasing picture brightness and lowering power

consumption. Setting Energy Save to “Mode 1” is recommended

for increased efficiency.

About the menu window size following video format

switch

The video program that you watch may be high definition (HD) or

standard definition (SD). This plasma display is designed to scale

to each type of definition properly. If the video program’s

definition type changes while a menu window is displayed on the

screen (for example: HD → SD or SD → HD), the menu size may

temporarily shrink or enlarge until the scaling is completed. This

may happen, for example, when you switch between television

and an external digital video recorder

(D-VHS), or when your recorded program switches between

different definition types, while the on-screen menu is being

shown.

If this happens, the menu will return to its normal size after two

to three seconds. This action is normal, and does not indicate a

problem with your plasma display.

Image Retention

When a static image is left frozen on a display for several hours,

a faint imprint of the image, known as image retention, can

remain. This image retention may be temporary or permanent.

Although caused by different things, image retention can occur

on all display technologies, including plasma and LCD. On

today’s plasma displays, permanent image retention is less of a

worry. Most image retention can be improved simply by watching

moving video.

Image retention, also known as burn-in, can occur in all

phosphor-based display systems (including CRT television

systems–both direct view and projection–as well as plasma

displays). Displaying the same still images for long periods

should be avoided as permanent image retention or burn-in may

occur. Recommended guidelines are as follows:

Do not display static images for long periods (such as still

images, fixed images from PC or TV game equipment, and/or

fixed images such as time of day indicator or channel logo

display).

Do not display content in the 4:3 aspect ratio (black or gray bars

on left and right side of content) or letter-box content (black bars

above and below content) for extended periods of time, or use

either of these viewing modes repeatedly within a short period of

time. This plasma display is equipped with multiple wide-screen

viewing modes; use one of these screen modes to fill the entire

screen with content.

Displaying dark images after displaying still images for a period

of time may cause image retention. In most cases, the image

retention can be corrected by displaying bright images for a

similar period of time.

If you display still images on your plasma display for long periods

of time, image retention may be irreparable.

Caution

Panel sticking and after-image lag

• Displaying the same images such as still images for a long

time may cause after-image lagging. This may occur in the

following two cases.

1 After-image lagging due to remaining electric load

When image patterns with very high peak luminance are displayed

more than one minute, after-image lagging may occur due to the

remaining electric load. The after-images remaining on the screen

will disappear when moving images are displayed. The time for the

after-images to disappear depends on the luminance of the still

images and the time they had been displayed.

2 After-image (lag image) due to burning

Avoid displaying the same image on the plasma display

continuously over a long period of time. If the same image is

displayed continuously for several hours, or for shorter periods of

time over several days, a permanent after-image may remain on

the screen due to burning of the fluorescent materials. Such

images may become less noticeable if moving images are later

displayed, but they will not disappear completely.

Note

• When a program menu, TV Guide screen or frozen image is

displayed for 5 to 10 minutes, the system automatically turns the

image off to prevent damage from screen burning.

• To minimize image retention, the display position is automatically

changed imperceptibly when watching plasma display.

Some parts of the picture may not be visible (see

Orbiter

on page

63).

Minimizing damage from screen burning

• Set the Side Mask detection function to “On”. The High

Definition 16:9 aspect ratio images containing side masks will

be detected automatically and side masks will be added or the

image displayed in full screen.

• We recommend that you enjoy watching images displayed in full

screen, except when doing so may result in copyright

infringement. The use of images displayed in screen sizes

different from the original video for financial gain or in

broadcasting for public viewing may result in infringement of the

legally enforceable rights of the copyright holder (see page 62).

Caution

DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART,

STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY

FALL, CAUSING SERIOUS PERSONAL INJURY AND SERIOUS

DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND,

TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE

MANUFACTURER, OR SOLD WITH THE PRODUCT. FOLLOW

THE MANUFACTURER’S INSTRUCTIONS WHEN INSTALLING

THE PRODUCT AND USE MOUNTING ACCESSORIES

RECOMMENDED BY THE MANUFACTURER.

A PRODUCT AND CART COMBINATION SHOULD BE MOVED

WITH THE CARE. QUICK STOPS, EXCESSIVE FORCE, AND

UNEVEN SURFACES MAY CAUSE THE PRODUCT AND CART

COMBINATION TO OVERTURN.

PDP5080HD.book Page 9 Monday, April 9, 2007 7:49 PM

10

En

Safety Precautions

02

Chapter 2

Safety Precautions

Electricity is used to perform many useful functions, but it can

also cause personal injuries and property damage if improperly

handled. This product has been engineered and manufactured

with the highest priority on safety. However, improper use can

result in electric shock and/or fire. In order to prevent potential

danger, please observe the following instructions when

installing, operating and cleaning the product. To ensure your

safety and prolong the service life of your product, please read

the following precautions carefully before using the product.

1. Read instructions—All operating instructions must be read

and understood before the product is operated.

2. Keep this manual in a safe place—These safety and operating

instructions must be kept in a safe place for future reference.

3. Observe warnings—All warnings on the product and in the

instructions must be observed closely.

4. Follow instructions—All operating instructions must be

followed.

5. Cleaning—Unplug the power cord from the AC outlet before

cleaning the product. To clean the product, use the supplied

cleaning cloth or other soft cloth (e.g., cotton, flannel). Do not

use liquid cleaners or aerosol cleaners.

6. Attachments—Do not use attachments not recommended by

the manufacturer. Use of inadequate attachments can result

in accidents.

7. Water and moisture—Do not use the product near water,

such as bathtub, washbasin, kitchen sink and laundry tub,

swimming pool and in a wet basement.

8. Stand—Do not place the product on an unstable cart, stand,

tripod or table. Placing the product on an unstable base can

cause the product to fall, resulting in serious personal

injuries as well as damage to the product. Use only a cart,

stand, tripod, bracket or table recommended by the

manufacturer or sold with the product. When mounting the

product on a wall, be sure to follow the manufacturer’s

instructions. Use only the mounting hardware recommended

by the manufacturer.

9. When relocating the product placed on a cart, it must be

moved with utmost care. Sudden stops, excessive force and

uneven floor surface can cause the product to fall from the

cart.

10. Ventilation—The vents and other openings in the cabinet are

designed for ventilation. Do not cover or block these vents

and openings since insufficient ventilation can cause

overheating and/or shorten the life of the product. Do not

place the product on a bed, sofa, rug or other similar surface,

since they can block ventilation openings. This product is not

designed for built-in installation; do not place the product in

an enclosed place such as a bookcase or rack, unless proper

ventilation is provided or the manufacturer’s instructions are

followed.

11. Power source—This product must operate on a power source

specified on the specification label. If you are not sure of the

type of power supply used in your home, consult your dealer

or local power company.

12. Power cord protection—The power cords must be routed

properly to prevent people from stepping on them or objects

from resting on them. Check the cords at the plugs and

product.

13. The plasma display used in this product is made of glass.

Therefore, it can break when the product is dropped or

applied with impact. Be careful not to be injured by broken

glass pieces in case the plasma display breaks.

14. Overloading—Do not overload AC outlets or extension cords.

Overloading can cause fire or electric shock.

15. Entering of objects and liquids—Never insert an object into

the product through vents or openings. High voltage flows in

the product, and inserting an object can cause electric shock

and/or short internal parts. For the same reason, do not spill

water or liquid on the product.

16. Servicing—Do not attempt to service the product yourself.

Removing covers can expose you to high voltage and other

dangerous conditions. Request a qualified service person to

perform servicing.

17. Repair—If any of the following conditions occurs, unplug the

power cord from the AC outlet, and request a qualified service

person to perform repairs.

a. When the power cord or plug is damaged.

b. When a liquid was spilled on the product or when objects

have fallen into the product.

c. When the product has been exposed to rain or water.

d. When the product has been dropped or damaged.

e. When the product displays an abnormal condition. Any

noticeable abnormality in the product indicates that the

product needs servicing.

18. Replacement parts—In case the product needs replacement

parts, make sure that the service person uses replacement

parts specified by the manufacturer, or those with the same

characteristics and performance as the original parts. Use of

unauthorized parts can result in fire, electric shock and/or

other danger.

19. Safety checks—Upon completion of service or repair work,

request the service technician to perform safety checks to

ensure that the product is in proper operating condition.

20. Wall or ceiling mounting—When mounting the product on a

wall or ceiling, be sure to install the product according to the

method recommended by the manufacturer.

21. Heat sources—Keep the product away from heat sources

such as radiators, heaters, stoves and other heat- generating

products (including amplifiers).

22. Unplug the power cord from the AC outlet before installing

the speakers (for PDP-5080HD only).

23. Never expose the screen of the plasma display to a strong

impact, for example, by hitting it. The screen may be broken,

resulting in fire or personal injury.

24. Do not expose the plasma display to direct sunlight for a long

period of time. The optical characteristics of the front

protection panel changes, resulting in discoloration or warp.

25. The plasma display weighs about 40.3 kg (88.8 lbs.) for the

PDP-5080HD (including the stand and speaker) and about

31.6 kg (69.7 lbs.) for the PDP-4280HD (including the stand).

Because it has small depth and is unstable, unpack, carry,

and install the product with one more person at least and use

the handles.

PDP5080HD.book Page 10 Monday, April 9, 2007 7:49 PM

11

En

Safety Precautions

02

English

Installation Precautions

Observe the following precautions when installing with any items such as the optional bracket.

When using the optional brackets or equivalent items

• Ask your dealer to perform the installation.

• Be sure to use the supplied bolts.

• For details, see the instruction manual that comes with the optional bracket (or equivalent items).

When using other items

• Consult your dealer.

• The following six mounting holes can be used for the installation:

Caution

• Be sure to use four or more mounting holes symmetrical to the vertical and horizontal median lines.

• Use M8 screws, which go 12 mm to 18 mm (0.5 inches to 0.7 inches) in depth from the mounting surface of the plasma display. See

the side view above.

• Be careful not to block the ventilation opening at the rear of the plasma display.

• Be sure to install the plasma display on a flat surface because it contains glass.

• The screw holes other than the above are to be used only for the specified products. Never use them for mounting non-specified

products.

Note

• It is strongly recommended to use the optional Pioneer mounting products.

• Pioneer shall not be liable for any personal injury or product damage that results from the use of mounting items other than the

optional Pioneer products.

4 5

Side view

Mounting hole Mounting hole

Median line

Mounting surface

Plasma

display

Mounting

bracket (or

equivalent item)

M8 screw

12 mm to 18 mm

(0.5 inches to 0.7 inches)

Rear view (PDP-5080HD)

Median line

4 5

Mounting hole

Median line

Rear view (PDP-4280HD)

Mounting

hole

PDP5080HD.book Page 11 Monday, April 9, 2007 7:49 PM

12

En

Supplied Accessories

03

Chapter 3

Supplied Accessories

Power cord (2 m/6.6 feet)

Warranty card

Bead bands

×

3

AA size batteries × 2

(Alkaline battery for

remote control unit)

Remote control unit

Speaker accessories

(for PDP-5080HD only)

Brackets for side × 2

Bracket for center

Speaker cables

×

2

Speaker Mounting Fittings

Speed clamps

×

3

Plastic bands x 2

Screws (M4 x 10 mm) x 2

(for plastic bands)

Speaker mounting screws

(M5

×

10 mm: Black) × 9

Operating instructions

Cleaning cloth

PDP5080HD.book Page 12 Monday, April 9, 2007 7:49 PM

13

En

Part Names

04

English

Chapter 4

Part Names

Plasma display

1 a

button

(See page 27.)

2

POWER ON indicator

(See page 27.)

3

STANDBY indicator

(See page 27.)

4

SLEEP indicator

5

Room Light Sensor

6

Remote control sensor

7 STANDBY/ON

button

8INPUT

button (

ENTER

button*)

9 VOLUME UP/DOWN

buttons (

UP/DOWN

buttons*)

10 CHANNEL UP/DOWN

buttons (

LEFT/RIGHT

buttons*)

11 TV GUIDE

button*

12

USB port

13

PHONES output terminal

14

INPUT 3 terminals (COMPONENT VIDEO: Y, P

B

,

P

R

)

15

INPUT 3 terminal (VIDEO)

16

INPUT 3 terminals (AUDIO)

The buttons with asterisks (*) can operate the TV Guide On

Screen™ system.

SLEEP

ON STANDBY

SLEEPON STANDBY

5

Viewed from below of the display

Viewed from the front side of the display

Side PDP-5080HD PDP-4280HD

Side

1

4

3

2

5 6

6

4

3

2

1

13

12

15

14

16

7

9

10

11

8

(Front)

The terminals on side panels are common to the PDP-5080HD

and PDP-4280HD.

PDP5080HD.book Page 13 Monday, April 9, 2007 7:49 PM

14

En

Part Names

04

1

CableCARD™ slot

2

ANT/CABLE A IN terminal

3

AC IN terminal

4

INPUT 4 terminal (HDMI)

5

INPUT 5 terminal (HDMI)

6

INPUT 6 terminal (HDMI)

7

INPUT 7 terminal (HDMI)

8

PC INPUT terminal (ANALOG RGB)

9

CONTROL OUT terminal

10

RS-232C terminal (used for factory setup)

11

ANT B IN terminal

12

INPUT 1 terminal (S-VIDEO)

13

INPUT 1 terminal (VIDEO)

14

SUB WOOFER terminal

15

AUDIO OUT terminals (AUDIO)

16

INPUT 1 terminals (AUDIO)

17

INPUT 2 terminals (AUDIO)

18

INPUT 4 terminals (AUDIO)

19

INPUT 5 terminals (AUDIO)

20

INPUT 2 terminal (VIDEO)

21

DIGITAL OUT terminal (OPTICAL)

22

PC INPUT terminal (AUDIO)

23

INPUT 2 terminals (COMPONENT VIDEO: Y, P

B

,

P

R

)

24

SPEAKERS (R/L) terminals

25

SPEAKERS (R) terminal (Speaker side)

26

SPEAKERS (L) terminal (Speaker side)

45

PDP-5080HD PDP-4280HD

22

21

17

14

15

16

18 19

23

13

12

20

1 2

3

11

10984 5 6 7

20

22

21

17

13

12

14

15

16

18

19

24 23

25

26

(Rear)

*For exact terminal positions, refer to

the terminal position sheet located

near the terminal compartment.

The terminals from 1 to 8 are the same as the

PDP-5080HD.

PDP5080HD.book Page 14 Monday, April 9, 2007 7:49 PM

15

En

Part Names

04

English

Remote control unit

This section describes the functions of the buttons available

when the mode switch has been set to TV. For the buttons for

controlling other equipment, see Using the remote control unit to

control other devices starting from page 84.

1TV

a

:

Turns on the power to the plasma display or places it

into standby mode.

2

Transmission confirmation LED

3INPUT

: Selects an input source of the plasma display.

(“INPUT 1”, “INPUT 2”, “INPUT 3”, “INPUT 4”, “INPUT 5”,

“INPUT 6” and “INPUT 7”)

4 SCREEN SIZE

: Selects the screen size.

5 AV SELECTION

: Selects audio and video settings.

(AV source:

OPTIMUM, STANDARD, DYNAMIC, MOVIE, GAME, USER.

PC source: STANDARD, USER.)

6INFO

: Displays a channel banner when a TV program is being

watched.

When the TV Guide On Screen™ system is in operation, displays

information about the currently highlighted channel (if available).

7HOME MENU

: Displays the HOME MENU screen.

MENU

: Displays a panel menu when the TV Guide On Screen™

system is in operation.

8 DAY +/–

: Jumps to the next or previous day of program listings

in the TV Guide On Screen™ Listing service.

9

/ / / : Selects a desired item on the menu screen.

10 HDMI CONTROL

: Displays the HDMI Control menu.

11 FAVORITE CH (A, B, C, D)

:

Selects any of the four preset channels. See page 43 for details

to set the FAVORITE CH.

While watching, you can toggle the set channels by pressing

A

,

B

,

C

and

D

.

12 0 to 9

: Selects the channel.

13 •(dot)

: Enters a dot.

14 CH +/–

: Selects the channel.

15 SPLIT

: Switches the screen mode among 2-screen, picture-in-

picture, and single-screen.

16 FREEZE

: Freezes a frame from a moving image. Press again to

cancel the function.

17 MTS

: Selects MTS/SAP or language depending on the program

being watched.

18 ANT

: Selects the antenna (A, B). See page 24 for details.

19 PC

: Selects the PC terminal as an input source.

20 DISPLAY

: Displays the channel information.

21 TV GUIDE

: Displays the TV Guide On Screen™ system.

22 ENTER

: Executes a command.

23 PAGE +/–

(for the TV Guide On Screen™ system): Scrolls the

program listing screen vertically.

24 RETURN

: Returns to the previous menu screen.

25 CH ENTER

: Executes a channel number.

26 CH RETURN

: Returns to the previous channel. This button is

disabled while the TV Guide On Screen™ system is displayed.

27 VOL +/–

: Sets the volume.

28 M

MUTING

: Mutes the sound.

29 SHIFT

: Moves the location of the small screen when in the

picture-in-picture mode.

30 SWAP

: Switches between the two screens when in the 2-screen

or picture-in-picture mode.

Luminous remote control buttons

All buttons on the remote control unit are luminous and gather

and store light. This enables quick access to the desired

function when performing operations in dark places.

Note

• When using the remote control unit, point it at the plasma

display.

• See pages 78 to 87 for operating buttons not listed on this

page.

1

10

11

13

12

14

22

23

24

5

3

4

18

19

20

21

7

8

9

15

17

16

26

25

28

27

30

29

2

6

Mode switch

(with “TV” selected)

PDP5080HD.book Page 15 Monday, April 9, 2007 7:49 PM

16

En

Preparation

05

Chapter 5

Preparation

Installing the plasma display

Location

• Avoid direct sunlight. Maintain adequate ventilation.

Note

• Allow enough space around the upper and back parts when

installing to ensure adequate ventilation of the rear of the unit.

Moving the plasma display

Because the plasma display is heavy, be sure to have someone

help you when moving it.

(PDP-5080HD)

(PDP-4280HD)

Caution

When installing on a rack, etc., hold the plasma display.

Installing the Pioneer speaker

(PDP-5080HD)

Caution

• If you want to move the plasma display unit, make sure that you

remove the speaker first. In addition, do not move the display

holding on to the mounting fittings. This can result in injury or

damage to the unit.

About the speaker

• In order to prevent damage to the speaker system resulting

from input overload, please observe the following precautions:

• Do not use the speaker with anything other than the plasma

display. Doing so may result in damage or fire.

• Be sure to turn the connected devices off and remove the

power cord from the power outlet beforehand when changing

the connection or installation method.

• When using a tone control function to greatly emphasize treble

sounds, do not use excessive amplifier volume.

• Please handle the speaker with sufficient care, as the grille net

and the cabinet can become damaged or broken when they are

subjected to strong external impacts.

• Placing a CRT computer screen or CRT monitor near to the

speaker may result in interference or color distortion. If this

happens, distance the monitor from the speaker.

Installation

• The speaker is wide, and may become unstable when installed

by a one person alone. This may result in injury or product

damage. Therefore, at least two people must assemble and

install it.

• When installing the speaker, do not use any screws other than

those supplied, otherwise the speaker may come off from the

main unit and fall over.

• When installing the speaker, tighten the screws firmly.

Over 50 cm

(19 11/16 inches)

Over

10 cm

(3 15/16

inches)

PDP5080HD.book Page 16 Monday, April 9, 2007 7:49 PM

17

En

Preparation

05

English

Note

• Before installing the speaker, make sure that the Pioneer table

top stand is attached to the plasma display.

1 Attach the speaker mounting fittings to the rear

of the plasma display.

• Attach the fittings for right and left sides to the bottom

right and left on the rear panel of the plasma display using

the supplied screws.

• Attach the fitting for center to the lower center on the rear

panel of the plasma display using the two supplied screws.

PDP-5080HD with the speaker installed

(with the Pioneer table top stand)

Speaker mounting fitting

(side)

Speaker

Speaker mounting fitting

(center)

Speaker cable

Speaker mounting fitting

(side)

Speaker mounting

screw (M5 x 10 mm)

Speaker mounting

screw (M5 x 10 mm)

Speaker mounting

screw (M5 x 10 mm)

Bead band

➁

Then, tighten the

screw in the screw

hole right under the

upper hole.

Speaker mounting fitting for side

(It shows the attachment of the fitting on

the left side. It is attached on the right

side by the same procedure.)

Speaker mounting screw

(M5 x 10 mm)

➀

Tighten the screw in

the upper screw hole

first.

Speaker mounting fitting for center

➁

Then, tighten the screw

in the oval-shaped screw

hole.

➀

Tighten the screw

in the round-

shaped hole first.

Speaker mounting screw

(M5 x 10 mm)

PDP5080HD.book Page 17 Monday, April 9, 2007 7:49 PM

18

En

Preparation

05

2 Fit the speaker to the mounting fittings in the correct direction.

• Be sure not to mount the speaker upside down.

Caution

• To avoid any damage to the speaker and/or table top stand from striking against each other, fit the speaker to the mounting fittings

while confirming their locations. As you may easily strike the stand, use the protective wrapping in which the speaker was wrapped

between the speaker and stand.

• When the speaker mounting fittings do not fit the grooves at the rear of the speaker, adjust the speaker mounting fittings angle.

3 Tighten from back using the supplied screws (three locations).

Tighten the three screws in order 1, 2, 3 as shown in the diagram.

Front side of the

speaker

The side with the padding strip

is facing upwards.

Insert the groove on the

back of the speaker into the

speaker mounting fitting.

For illustrative purposes, the table

top stand is not presented here.

Protective

wrapping

3

1

2

Speaker mounting screw

(M5 x 10 mm)

Speaker mounting screw

(M5 x 10 mm)

Speaker mounting screw

(M5 x 10 mm)

When using the

table top stand, do

not use these holes.

Caution

• If you want to move the plasma display, make

sure that you remove the speaker first. In

addition, do not move the plasma display

holding on to the mounting fittings. This can

result in injury or damage to the unit.

The screw hole at the bottom of the speaker

mounting fitting is used when the plasma

display is installed on the wall. It is not used

when installed with the stand.

Note

• If after attaching the speaker its position

needs to be adjusted horizontally or

vertically, first loosen the speaker mounting

screws, reposition and then tighten the

screws again at the appropriate position.

PDP5080HD.book Page 18 Monday, April 9, 2007 7:49 PM

19

En

Preparation

05

English

4 Connect the supplied speaker cables to the rear of

plasma display.

Connect the cables correctly with respect to the polarity of

the plasma display speaker terminals, that is,  cable (Gray)

to  terminals (Red) and  cable (Black) to  terminals

(Black).

5 Connect the other end of the speaker cables to the

speaker.

Connect the cables correctly with respect to the polarity of

the speaker terminals, that is,  cable (Gray) to  terminals

(Red) and  cable (Black) to  terminals (Black).

Note

• Press the lever and insert the end of the cable.

• When you release the lever, it clamps

onto the speaker cable.·

Caution

• Be sure to turn the connected devices off and remove the

power cord from the wall outlet beforehand when changing the

connection or installation method.

• If you insert the speaker cable too

far so that the insulation is

touching the speaker terminal, you

may not get any sound. Please

insert it with showing the copper

wire.

• Check if the end of the speaker cables are securely connected

to the terminals by slightly tugging on the cable after making

connections. Loose connections may result in sound dropouts

or noise.

• If there is a short in the  and  cables caused by an exposed

lead wire, excessive load may be applied to the plasma display,

resulting in interrupted operation or malfunction.

• Incorrect connections of the speaker cable to the right or left of

the plasma display terminals with respect to the polarity may

result in insufficient stereo sound effects, delivering poor bass

sounds or unstable sound image.

• Bundle the cable without pulling.

6 Bundle the cables.

• Bead bands are included with the plasma display.

• Use the bead bands as necessary.

• When tidying up your speaker cables, make sure to bundle

them so that they are not subjected to any pressure.

Gray

Speaker cable

Speaker terminalSpeaker terminal

Gray

Black



Red



Black

Gray

Black

Speaker terminal

Black

Red

Lever

Speaker cableBead band

Rear view

PDP5080HD.book Page 19 Monday, April 9, 2007 7:49 PM

20

En

Preparation

05

When using the hung on wall unit:

Note

• First lay the plasma display on top of a soft sheet etc., remove

the stand, then attach the speaker mounting fittings.

1 Attach the speaker mounting fittings to the rear

of the plasma display (See procedure 1 on page 17.

2 Connect the supplied speaker cables to the rear of

the plasma display (See procedure 4 on page 19).

3 Place the plasma display on the mounting fittings

of the hung on wall unit.

For details, refer to the instruction manual supplied with the

hung on wall unit.

Caution

• Be careful about the speaker mounting fittings when installing

or connecting. This may result in injury.

4 Connect the other end of the speaker cables to the

speaker (See procedure 5 on page 19).

Caution

• Have two people perform this procedure.

5 Fit the speaker to the mounting fittings the correct

direction.

Caution

• Be sure not to mount the speaker upside down.

6 Tighten from below using the supplied screws

(three locations).

• Tighten the three screws in order 1, 2, 3 as shown in the

diagram.

The screw hole at the rear surface of the speaker mounting

fitting is used when the plasma display is installed with the

table top stand. It is not used when installed with the

stand.

Note

• If after attaching the speaker its position needs to be adjusted

horizontally, first loosen the speaker mounting screws,

reposition and then tighten the screws again at the appropriate

position.

7 Bundle the cables (See procedure 6 on page 19).

3

1

2

Speaker mounting

screw

(M5 x 10 mm)

When using the hung on wall

unit, do not use this hole.

Speaker mounting

screw (M5 x 10 mm)

Speaker mounting

screw (M5 x 10 mm)

PDP5080HD.book Page 20 Monday, April 9, 2007 7:49 PM

La page charge ...

Pioneer PDP-4280HD Manuel utilisateur

Ce manuel convient également à

Pioneer PDP-4280HD Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents