Samsung BD-H4500 Manuel utilisateur

Marque: Samsung

Modèle: BD-H4500

Catégorie: Lecteurs Blu-Ray

Taper: Manuel utilisateur

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

Blu-ray

™

Disc Player

user manual

BD-H4500

ENGLISH

BD_H4500_ZC-ENG-01 VE.indd 1 10/29/14 4:02 AM

Safety Information

Warning

•

The slots and openings in the cabinet and

in the back or bottom are provided for

necessary ventilation. To ensure reliable

operation of this apparatus, and to protect it

from overheating, these slots and openings

must never be blocked or covered.

- Do not place this apparatus in a confined

space, such as a bookcase, or built-

in cabinet, unless proper ventilation is

provided.

- Do not place this apparatus near or over

a radiator or heat register, or where it is

exposed to direct sunlight.

- Do not place vessels (vases etc.) containing

water on this apparatus. A water spill can

cause a fire or electric shock.

•

Do not expose this apparatus to rain or place

it near water (near a bathtub, washbowl,

kitchen sink, or pool, etc.). If this apparatus

accidentally gets wet, unplug it and contact

an authorized dealer immediately.

•

This apparatus uses batteries. In your

community, there might be environmental

regulations that require you to dispose of these

batteries properly. Please contact your local

authorities for disposal or recycling information.

•

Do not overload wall outlets, extension

cords or adaptors beyond their capacity,

since this can result in fire or electric shock.

•

Route power-supply cords so that they

are not likely to be walked on or pinched

by items placed on or against them. Pay

particular attention to cords at the plug end,

at wall outlets, and the point where they exit

from the apparatus.

•

To protect this apparatus from a lightning

storm, or when it is left unattended and

unused for long periods of time, unplug

it from the wall outlet and disconnect the

antenna or cable system. This will prevent

damage to the set due to lightning and

power line surges.

•

Before connecting the AC power cord to the

DC adaptor outlet, make sure the voltage

designation of the DC adaptor corresponds

to the local electrical supply.

•

Never insert anything metallic into the open

parts of this apparatus. Doing so may create

a danger of electric shock.

•

To avoid electric shock, never touch the

inside of this apparatus. Only a qualified

technician should open this apparatus.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE THE COVER(OR

BACK). THERE ARE NO USER SERVICEABLE

PARTS INSIDE. REFER ALL SERVICING TO

QUALIFIED PERSONNEL.

This symbol indicates that high

voltage is present inside. It is

dangerous to make any kind of

contact with any internal part of

this product.

This symbol indicates that

important literature concerning

operation and maintenance has

been included with this product.

•

Make sure to plug the power cord in until it

is firmly seated. When unplugging the power

cord from a wall outlet, always pull on the

power cord's plug. Never unplug by pulling

on the power cord. Do not touch the power

cord with wet hands.

•

If this apparatus does not operate normally

- in particular, if there are any unusual

sounds or smells coming from it - unplug

it immediately and contact an authorized

dealer or service center.

•

Maintenance of Cabinet.

- Before connecting other components to

this product, be sure to turn them off.

- If you move your product suddenly

from a cold place to a warm place,

condensation may occur on the

operating parts and lens and cause

abnormal disc playback. If this occurs,

unplug the product, wait for two hours,

and then connect the plug to the power

outlet. Then, insert the disc, and try to

play back again.

•

Be sure to pull the power plug out of the

outlet if the product is to remain unused or

if you are leaving the house for an extended

period of time (especially when children,

elderly, or disabled people will be left alone

in the house).

- Accumulated dust can cause an electric

shock, an electric leakage, or a fire by

causing the power cord to generate sparks

and heat or the insulation to deteriorate.

•

Contact an authorized service center for

information if you intend to install your

product in a location with heavy dust, high

or low temperatures, high humidity, chemical

substances, or where it will operate 24

hours a day such as in an airport, a train

station, etc. Failing to do so may lead to

serious damage of your product.

•

Use only a properly grounded plug and wall

outlet.

- An improper ground may cause electric

shock or equipment damage. (Class l

Equipment only.)

•

To turn this apparatus off completely, you

must disconnect it from the wall outlet.

Consequently, the wall outlet and power

plug must be readily accessible at all times.

•

Do not allow children to hang on the

product.

•

Store the accessories (battery, etc.) in a

location safely out of the reach of children.

•

Do not install the product in an unstable

location such as a shaky self, a slanted floor,

or a location exposed to vibration.

•

Do not drop or strike the product. If the

product is damaged, disconnect the power

cord and contact a service center.

•

To clean this apparatus, unplug the power

cord from the wall outlet and wipe the

product using a soft, dry cloth. Do not

use any chemicals such as wax, benzene,

alcohol, thinners, insecticide, air fresheners,

lubricants, or detergent. These chemicals

can damage the appearance of the product

or erase the printing on the product.

•

Do not expose this apparatus to dripping

or splashing. Do not put objects filled with

liquids, such as vases on the apparatus.

•

Do not dispose of batteries in a fire.

•

Do not plug multiple electric devices into the

same wall socket. Overloading a socket can

cause it to overheat, resulting in a fire.

•

There is danger of an explosion if you

replace the batteries used in the remote with

the wrong type of battery. Replace only with

the same or equivalent type.

•

WARNING - TO PREVENT

THE SPREAD OF FIRE,

KEEP CANDLES AND

OTHER ITEMS WITH OPEN

FLAMES AWAY FROM THIS

PRODUCT AT ALL TIMES.

BD_H4500_ZC-ENG-01 VE.indd 2 10/29/14 4:02 AM

FCC NOTE (for U.S.A)

This equipment has been tested and found

to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide

reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses and can radiate

radio frequency energy and, if not installed and

used in accordance with the instructions, may

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment off and on.

The user is encouraged to try to correct the

interference by one or more of the following

measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the

equipment and receiver.

•

Connect this equipment into an outlet on

a circuit different from that to which the

receiver is connected.

•

Consult the dealer or an experienced radio/

TV technician for help.

• This class B digital product meets all

requirements of the Canadian Interference -

Causing Equipment Regulations.

Note to CATV system installer

This reminder is provided to call the CATV

system installer's attention to Article 820-40

of the National Electrical Code (Section 54 of

Canadian Electrical Code, Part I) that provides

guidelines for proper grounding and, in

particular, specifies that the cable ground shall

be connected to the grounding system of the

building as close to the point of cable entry as

practical.

CLASS 1 LASER PRODUCT

This Compact Disc player is classified as a

CLASS 1 LASER product. Use of controls,

adjustments or performance of procedures

other than those specified herein may result in

hazardous radiation exposure.

DANGER :

•

VISIBLE AND INVISIBLE LASER RADIATION

WHEN OPEN. AVOID DIRECT EXPOSURE

TO BEAM. (FDA 21 CFR)

CAUTION :

•

CLASS 3B VISIBLE AND INVISIBLE

LASER RADIATION WHEN OPEN. AVOID

EXPOSURE TO THE BEAM. (IEC 60825-1)

•

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS

OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE. DO NOT OPEN COVER AND

DO NOT REPAIR YOURSELF. REFER

SERVICING TO QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

PRODUCTO LÁSER CLASE 1

✎

NOTES

If the Region number of a Blu-ray Disc/DVDs

does not correspond to the Region number

of this product, the product cannot play the

disc

Precautions

Important Safety Instructions

Read these operating instructions carefully

before using the unit. Follow all the safety

instructions listed below.

Keep these operating instructions handy for

future reference.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the

manufacturer's instructions.

8. Do not install near any heat sources

such as radiators, heat registers,

stoves, or other apparatus (including AV

receivers) that produce heat.

9. Do not defeat the safety purpose of

the polarized or grounding-type plug.

A polarized plug has two blades with

one wider than the other. A grounding

type plug has two blades and a third

grounding prong. The wide blade or

the third prong are provided for your

safety. If the provided plug does not fit

into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being

walked on or pinched particularly at

plugs, convenience receptacles, and the

point where it exits the apparatus.

11. Only use attachments/accessories

specified by the manufacturer.

12. Use only

with the cart,

stand, tripod,

bracket, or table

specified by the

manufacturer,

or sold with the

apparatus. When

a cart is used, use caution when moving

the cart/apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning

storms or when unused for long periods

of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as when the power-supply

cord or plug is damaged, liquid has

been spilled or objects have fallen into

the apparatus, the apparatus has been

exposed to rain or moisture, does not

operate normally, or has been dropped.

BD_H4500_ZC-ENG-01 VE.indd 3 10/29/14 4:02 AM

• To reduce the risk of fire or electric shock,

do not expose this appliance to rain or moisture.

Contents

SAFETY INFORMATION

Warning ..................................................... 2

Precautions ............................................... 3

GETTING STARTED

Before using the User Manual .................... 4

Logos of Discs the player can play ............ 5

Accessories ............................................... 6

Front Panel ................................................ 7

Rear Panel ................................................. 7

Remote Control ......................................... 7

CONNECTIONS

Connecting to a TV .................................... 8

Connecting to an Audio System ................ 8

SETTINGS

The Initial Settings Procedure..................... 9

Menu Navigation ........................................ 9

Accessing the Settings Menu .................... 9

Display Settings ......................................... 9

Audio Settings ......................................... 10

System Settings ...................................... 11

Language Settings ................................... 12

Security Settings...................................... 12

Support Settings ..................................... 13

MEDIA PLAY

Playing a Commercially Recorded Disc .... 13

Playing Files on a USB Device ................. 13

Playing a Disc with User Recorded

Content ................................................... 14

Controlling Video Playback ...................... 14

Controlling Music Playback ...................... 15

Playing Photo Contents ........................... 16

APPENDIX

Troubleshooting ....................................... 17

Specifications .......................................... 17

Getting Started

Before using the User Manual

Disc Types and Contents your player can play

Media Disc Type Details

VIDEO

Blu-ray Disc BD-ROM or BD-RE/-R recorded in the BD-RE format.

DVD-VIDEO

DVD-RW

DVD-R

DVD+RW

DVD+R

DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have

been recorded and finalized, or a USB storage media containing MKV

or MP4 contents.

MUSIC

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB

storage media containing MP3 or WMA contents.

PHOTO

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB

storage media containing JPEG contents.

✎

NOTES

The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.

If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.

Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.

Your player will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds

25 Mbps.

Playback may not work for some types of discs, or when you use specific functions, such as angle change

and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to

this if necessary.

When you play a BD-J title, loading may take longer than a normal title or some functions may perform

slowly.

Disc types your player cannot play

•

HD DVD

•

DVD-ROM/PD/

MV, etc

•

DVD-RAM

•

Super Audio CD

(except CD layer)

•

DVD-RW (VR mode)

•

CVD/CD-ROM/CDV/

CD-G/CD-I/LD (CD-Gs play

audio only, not graphics.)

•

3.9 GB DVD-R for

Authoring.

BD_H4500_ZC-ENG-01 VE.indd 4 10/29/14 4:02 AM

Region Code

Both players and discs are coded by region.

These regional codes must match for a disc

to play. If the codes do not match, the disc

will not play.

The Region Code for this player is displayed

on the rear panel of the player.

Disc Type

Region

Code

Area

Blu-ray

Disc

North America, Central

America, South America,

Korea, Japan, Taiwan, Hong

Kong and South East Asia.

Europe, Greenland, French

territories, Middle East, Africa,

Australia and New Zealand.

India, China, Russia,

Central and South Asia.

DVD-

VIDEO

The U.S., U.S. territories

and Canada

Europe, Japan, the Middle

East, Egypt, Africa, Greenland

Taiwan, Korea, the

Philippines, Indonesia,

Hong Kong

Mexico, South America,

Central America, Australia,

New Zealand, Pacific

Islands, Caribbean

Russia, Eastern Europe,

India, North Korea, Mongolia

China

Logos of Discs the player

can play

Blu-ray Disc

NTSC broadcast system

in U.S.A, Canada, Korea,

Japan

Supported File Formats

Notes on the USB connection

• Your player supports USB storage media,

MP3 players, digital cameras, and USB

card readers.

• The player does not support folder or file

names longer than 128 characters.

•

Some USB/External HDD/digital camera

devices may not be compatible with the

player.

• Your player supports the FAT16, FAT32,

and NTFS file systems.

•

Connect USB devices directly to the

player’s USB port. Connecting through

a USB cable may cause compatibility

problems.

• Inserting more than one memory device

into a multi-card reader may cause the

reader to operate improperly.

•

The player does not support the PTP

protocol.

• Do not disconnect a USB device during a

"loading" process.

• The bigger the image resolution, the

longer the image takes to display.

• This player cannot play MP3 files with DRM (Digital Rights Management) downloaded from

commercial sites.

•

Your player only supports video with a frame rate under 30fps (frames per second).

• Your player only supports USB Mass Storage Class (MSC) devices such as thumb drives

and USB HDD. (HUB is not supported.)

• Certain USB HDD Devices, multi-card readers and thumb drives may not be compatible

with this player.

•

If some USB devices require excessive power, they may be limited by the circuit safety

device.

• If playback from a USB HDD is unstable, provide additional power by plugging the HDD

into a wall socket.

If the problem continues, contact the USB HDD manufacturer.

• SAMSUNG is not responsible for any data file damage or data loss.

• Your player does not support NTFS compressed files, sparse files, or encrypted files.

• You can repair or format a USB device on your Desktop PC. (MS-Windows OS only).

Video File Support

File Extension Container Video Codec Audio Codec Resolution

*.avi

AVI

MP4v3

MP3

Dolby Digital

DTS

WMA

PCM

1920x1080

H.264 BP/MP/HP

1920x1080

*.mkv

MKV

VC-1 AP

MP3

Dolby Digital

DTS

1920x1080

H.264 BP/MP/HP

1920x1080

*.wmv

WMV (wmv9)

VC-1 AP

WMA

1920x1080

VC-1 SM

1920x1080

*.mp4

MP4

MP4 (mp4v)

AAC

1920x1080

H.264 BP/MP/HP

1920x1080

*.mpg

*.mpeg

MPEG1

MP1, 2

Dolby Digital

DTS

1920x1080

MPEG2

1920x1080

H.264 BP/MP/HP

1920x1080

BD_H4500_ZC-ENG-01 VE.indd 5 10/29/14 4:02 AM

• Limitations

- Even when a file is encoded by a supported codec listed above, the file might not be

played if its content has a problem.

- Normal playback is not guaranteed if the file’s container information is wrong or the file

itself is corrupted.

- Files having a higher Bit rate/frame rate than standard may stutter during sound/video

playback.

- The Seek (skip) function is not available if the file’s index table is damaged.

• Video decoder

- Supports up to H.264 Level 4.1 and AVCHD

- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4

- MPEG4 SP, ASP :

Below 1280 x 720 : 60 frames max

Above 1280 x 720 : 30 frames max

- Does not support GMC 2 or higher

• Audio decoder

- Supports WMA 7, 8, 9 and STD

- Does not support WMA sampling rate of 22050Hz mono.

- AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96)

Max bitrate: 320kbps

Music File Support

File Extension Container Audio Codec Support Range

*.mp3

MP3 MP3

*.wma

WMA WMA

* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48

* Bit rates - All bit-rates from 5kbps to 355kbps

Picture File Support

File Extension Type Resolution

*.jpg

*.jpeg

*.jpe

JPEG

15360x8640

*.png

PNG

15360x8640

AVCHD (Advanced Video Codec High Definition)

•

This player can play back AVCHD format discs. These discs are normally recorded and used in

camcorders.

•

The AVCHD format is a high definition digital video camera format.

•

The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the

conventional image compressing format.

•

Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs that

use "x.v.Color" format.

•

"x.v.Color" is a trademark of Sony Corporation.

•

"AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd. and

Sony Corporation.

✎

NOTES

Some AVCHD format discs may not play, depending on the recording condition.

AVCHD format discs need to be finalized.

"x.v.Color" offers a wider color range than normal DVD camcorder discs

Accessories

Check for the supplied accessories shown below.

SCREEN

VIEW A-B

FULLBONUS REPEAT REPEAT

Batteries for Remote Control

(AAA Size)

User Manual Remote Control

BD_H4500_ZC-ENG-01 VE.indd 6 10/29/14 4:02 AM

Front Panel

USB HOST

REMOTE CONTROL SENSOR

DISC TRAY

PLAY/PAUSE BUTTON

OPEN/CLOSE BUTTON

POWER BUTTON

✎

NOTES

When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button on

the player or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then

press the

button.

You can perform software upgrades using the USB Host jack with a USB flash memory stick only.

Rear Panel

HDMI OUT

Remote Control

Tour of the Remote Control

SCREEN

A-BVIEW

FULLBONUS REPEAT REPEAT

AUDIO HOME SUBTITLE

Turn the player on and off.

Allows you to repeat A-B disc. (This function

might be not available or work not correctly,

depends on type of disc or recording

conditions).

Press numeric buttons to operate options.

Press to open and close the disc tray.

Use to enter the disc menu.

Press to skip backwards or forwards.

Press to stop a disc.

Press to use bonusview function.

Return to the previous menu.

These buttons are used both for menus on the

player and also several Blu-ray Disc functions.

Use to select menu items and change menu

values.

Press to use Tools menu.

Use to access various audio functions on a

disc (Blu-ray Disc/DVD).

Press to play a disc.

Press to pause a disc.

Turn the TV on and off.

Press to switch the Blu-ray Disc/DVD's

subtitle language.

Use to enter the popup menu/title menu.

Press to search a disc backwards or

forwards.

Press to move to the home menu.

Press to see the full screen on a TV.

During the Blu-ray Disc/DVDs playback, Full

Screen button does not operate.

Press to exit the menu.

Use to display the playback information.

Allows you to repeat a title, chapter, track or

disc. (This function might be not available or

work not correctly, depends on type of disc

or recording conditions).

TV volume adjustment.

After setup, allows you to set the input

source on your TV.

Installing batteries

✎

NOTES

If the remote does not operate properly:

•

Check the polarity (+/–) of the batteries.

•

Check if the batteries are drained.

•

Check if the remote sensor is blocked by obstacles

•

Check if there is any fluorescent lighting nearby.

CAUTION

Dispose of batteries according to local

environmental regulations. Do not put them in the

household trash

Do not dispose of batteries in a fire.

Do not short circuit, disassemble or overheat the

batteries.

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

BD_H4500_ZC-ENG-01 VE.indd 7 10/29/14 4:02 AM

Connections

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of

the product to the HDMI IN jack on your TV.

- Do not connect the power cord to the wall outlet until you have made all the

other connections.

- When you change the connections, turn off all devices before you start.

Audio

Video

✎

NOTES

Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your

TV.

When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the first

time, the player automatically sets the HDMI output resolution to the highest supported by the TV.

A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.

To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed HDMI cable.

HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the

screen.

Connecting to an Audio System

You can connect the Blu-ray player to an audio system using illustrated below.

- Do not connect the power cord to the wall outlet until you have made all the

other connections.

- When you change the connections, turn off all devices before you start.

Connecting to an HDMI supported AV receiver

• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back

of the product to the HDMI IN jack on your receiver.

• Best quality (Recommended)

Audio

BD_H4500_ZC-ENG-01 VE.indd 8 10/29/14 4:02 AM

Settings

The Initial Settings

Procedure

•

The Home screen will not appear if you

do not configure the initial settings.

•

The OSD (On Screen Display) may

change in this player after you upgrade

the software version.

•

The access steps may differ depending

on the menu you selected.

•

After the initial settings process is

complete, you can then operate the panel

buttons and remote control

After you have connected the player

to your TV, turn on the TV and player.

When you turn on the player the first

time, the player's Initial Settings screen

appears on the TV. The Initial Setting

procedure lets you set the On Screen

menu languages, the aspect ratio (screen

size).

✎

NOTES

If you want to display the Initial Setting screen

again to make changes, press the

button

on the front panel of the player for more than

5 seconds with no disc inserted. This resets

the player to its default settings.

After the initial settings process is complete,

you can operate the HDMI-CEC function.

If you want to use the Anynet+(HDMI-CEC)

function to aid in the initial set up process,

please follow the instructions below.

1) Connect the player to an Anynet+(HDMI-CEC)

compliant Samsung TV using HDMI Cable.

2) Set the Anynet+(HDMI-CEC) feature to On in

both the TV and the player.

3) Set the TV to the Initial Settings Procedure.

If you leave the player in the stop mode for

more than 5 minutes without using it, a screen

saver will appear on your TV. If the player is

left in the screen saver mode for more than 25

minutes, the power will automatically turn off.

Menu Navigation

SCREEN

VIEW A-B

FULLBONUS REPEAT REPEAT

HOME Button : Press to move to the Home

menu.

RETURN Button :

Return to the previous

menu.

(Enter) / DIRECTION Button :

Move the cursor or select an item.

Activate the currently selected item.

Confirm a setting.

EXIT Button : Press to exit the current

menu.

• Home Menu

Change Device

Settings

Play Disc Photos Videos Music

Empty disc tray

Selects Videos.

Selects Music.

Selects Settings.

Selects Change Device.

Selects Play Disc.

Selects Photos.

✎

NOTES

The Videos, Photos, and Music options require

that you have an appropriate disc inserted into

the player or a USB flash device attached to

the player.

Accessing the Settings

To access the Settings menu and sub-

menus, follow these steps:

Press the POWER button.

The Home Menu appears.

Press the ▲▼◄► buttons to select

Settings, and then press the

button.

Press the ▲▼ buttons to select the

desired submenu, and then press

the

button.

Press the ▲▼ buttons to select the

desired item, and then press the

button.

Press the EXIT button to exit the

menu.

✎

NOTES

The access steps may differ depending on

the menu you selected. The OSD (On Screen

Display) may change in this player after you

upgrade the software version

Display Settings

You can configure various display

options such as the TV Aspect Ratio,

Resolution, etc.

TV Aspect Ratio

Depending on the type of television

you have, you may want to adjust the

screen size setting.

✎

NOTES

Depending on the disc type, some aspect

ratios may not be available.

If you select an aspect ratio and option which

is different than the aspect ratio of your

TV screen, the picture might appear to be

distorted.

BD_H4500_ZC-ENG-01 VE.indd 9 10/29/14 4:02 AM

BD Wise (Samsung TVs only)

BD Wise is Samsung’s latest inter-

connectivity feature.

When you connect a Samsung player

and a Samsung TV with BD Wise to

each other via HDMI, and BD Wise is

on in both the player and TV, the player

outputs video at the video resolution and

frame rate of the Blu-ray Disc/DVDs.

✎

NOTES

When BD Wise is on, the Resolution setting

automatically defaults to BD Wise and BD Wise

appears in the Resolution menu.

If the player is connected to a device that does

not support BD Wise, you cannot use the BD

Wise function.

For proper operation of BD Wise, set the BD

Wise menu of both the player and the TV to On.

Resolution

Lets you set the output resolution of

the HDMI video signal to Auto, 1080p,

1080i, 720p or 480p. The number

indicates the number of lines of video

per frame. The i and p indicate interlaced

and progressive scan, respectively. The

more lines, the higher the quality.

Resolution according to the output

mode

• Blu-ray Disc/E-contents/Digital

Contents playback

Output

Setup

HDMI / connected

HDMI Mode

Blu-ray

Disc

E-contents/

Digital

contents

BD Wise

Resolution of

Blu-ray Disc

1080p

Auto

Max. Resolution

of TV input

Max. Resolution of

TV input

1080p@60F

(Movie Frame : Off)

1080p@60F 1080p@60F

Movie Frame :

Auto (24Fs)

1080p@24F 1080p@24F

1080i 1080i 1080i

720p 720p 720p

480p 480p 480p

• DVD playback

Output

Setup

HDMI / connected

HDMI Mode

BD Wise 480i

Auto Max. Resolution of TV input

1080p 1080p

1080i 1080i

720p 720p

480p 480p

✎

NOTES

If the TV you connected to the player does

not support Movie Frame or the resolution

you selected, the message "If no pictures are

shown after selecting ‘Yes’, please wait for 15

seconds to return to the previous resolution.

Do you want to change the resolution?"

appears. If you select Yes, the TV’s screen

will go blank for 15 seconds, and then the

resolution will revert to the previous resolution

automatically.

If the screen stays blank after you have

changed the resolution, remove all discs, and

then press and hold the

button on the

front of the player for more than 5 seconds.

All settings are restored to the factory default.

Follow the steps on the previous page to

access each mode and select the Display

Setup that your TV will support.

When the factory default settings are restored,

all stored user BD data is deleted.

The Blu-ray Disc must have the 24 frame

feature for the player to use the Movie Frame

(24Fs) mode.

Movie Frame (24Fs)

Setting the Movie Frame (24Fs) feature

to Auto allows you to adjust the player’s

HDMI output to 24 frames per second for

improved picture quality.

You can enjoy the Movie Frame (24Fs)

feature only on a TV supporting this frame

rate. You can select Movie Frame only

when the player is in the HDMI 1080p

output resolution modes.

HDMI Color Format

Lets you set the color space format for

HDMI output to match the capabilities of

the connected device (TV, monitor, etc).

HDMI Deep Color

Lets you output video from the HDMI

OUT jack with Deep Color. Deep

Color provides more accurate color

reproduction with greater color depth.

Progressive Mode

Lets you improve picture quality when

viewing DVDs.

Audio Settings

Digital Output

Lets you select the digital audio output

format that is suitable for your TV or

AV Receiver. For more details, please

refer to the Digital Output Selection

table below.

BD_H4500_ZC-ENG-01 VE.indd 10 10/29/14 4:02 AM

Digital Output Selection

Setup PCM

Bitstream

(Unprocessed)

Bitstream

(Re-encoded DTS)

Bitstream

(Re-encoded Dolby D)

Connection

HDMI

Receiver

HDMI Receiver HDMI Receiver

HDMI supported AV

receiver

Audio

Stream

on Blu-

ray Disc

PCM Up to 7.1ch PCM Re-encoded DTS Re-encoded Dolby Digital *

Dolby Digital PCM 2ch Dolby Digital Re-encoded DTS Re-encoded Dolby Digital *

Dolby Digital

Plus

PCM 2ch Dolby Digital Plus Re-encoded DTS Re-encoded Dolby Digital *

Dolby TrueHD PCM 2ch Dolby TrueHD Re-encoded DTS Re-encoded Dolby Digital *

DTS PCM 2ch DTS Re-encoded DTS Re-encoded Dolby Digital *

DTS-HD High

Resolution Audio

PCM 2ch

DTS-HD High

Resolution Audio

Re-encoded DTS Re-encoded Dolby Digital *

DTS-HD

Master Audio

PCM 2ch

DTS-HD Master

Audio

Re-encoded DTS Re-encoded Dolby Digital *

Audio

Stream

on DVD

PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch

Dolby Digital PCM 2ch Dolby Digital Dolby Digital Dolby Digital

DTS PCM 2ch DTS DTS DTS

Definition

for Blu-ray

Disc

Any

Decodes

main feature

audio and

BONUSVIEW

audio stream

together into

PCM audio

and add

Navigation

Sound Effects.

Outputs only main

feature audio

stream so that your

AV receiver can

decode the audio

bitstream.

You will not hear

BONUSVIEW audio

and Navigation

Sound Effects.

Decodes main

feature audio and

BONUSVIEW audio

stream together into

PCM audio and add

Navigation Sound

Effects, then re-

encodes the PCM

audio into DTS

bitstream

Decodes main feature

audio and BONUSVIEW

audio stream together

into PCM audio and add

Navigation Sound Effects,

then re-encodes the PCM

audio into Dolby Digital

bitstream

* If Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied.

Blu-ray Discs may include three audio streams :

- Main Feature Audio : The audio soundtrack of the main feature.

- BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.

- Navigation Sound Effects : When you choose a menu navigation selection, a Navigation

Sound Effect may sound. Navigation Sound Effects are different on each Blu-ray Disc.

✎

NOTES

Be sure to select the correct Digital Output or

you will hear no sound or just loud noise.

If the HDMI device (AV receiver, TV) is not

compatible with compressed formats (Dolby

Digital, DTS), the audio signal outputs as PCM.

Regular DVDs do not have BONUSVIEW audio

and Navigation Sound Effects.

Some Blu-ray Discs do not have BONUSVIEW

audio and Navigation Sound Effects.

If you play MPEG audio soundtracks, the audio

signal outputs as PCM regardless of your

Digital Output selections (PCM or Bitstream).

If your TV is not compatible with compressed

multi-channel formats (Dolby Digital, DTS), the

player may output PCM 2ch downmixed audio

even though you selected Bitstream (either Re-

encoded or Unprocessed) in the setup menu.

If your TV is not compatible with PCM sampling

rates over 48kHz, the player may output 48kHz

downsampled PCM audio

Dynamic Range Control

Lets you apply dynamic range control

to Dolby Digital, Dolby Digital Plus, and

Dolby True HD audio.

•

Auto : Automatically controls the

dynamic range of Dolby TrueHD

audio, based on information in the

Dolby TrueHD soundtrack.

Also turns dynamic range control on

for Dolby Digital and Dolby Digital

Plus.

•

Off : Leaves the dynamic range

uncompressed, letting you hear the

original sound.

•

On : Turns dynamic range control on

for all three Dolby formats. Quieter

sounds are made louder and the

volume of loud sounds is reduced.

Downmixing Mode

Lets you select the multi-channel

downmix method that is compatible with

your stereo system. You can choose

to have the player downmix to normal

stereo or to surround compatible stereo.

System Settings

Initial Settings

By using the Initial Settings function, you

can set the language, etc.

For more information about the Initial

Settings function, refer to the Initial

Settings section of this user manual (See

page 9).

Quick Start

You can turn on the power quickly by

decreasing the boot time.

✎

NOTES

If this function is set to On, Standby power

consumption will be increased.

BD_H4500_ZC-ENG-01 VE.indd 11 10/29/14 4:02 AM

Language Settings

You can select the language you prefer

for the On-Screen menu, disc menu,

audio, and subtitles.

✎

NOTES

The selected language will only appear if it is

supported on the disc.

Security Settings

When you access this function for the

first time, the PIN screen appears.

Enter the default PIN - 0000 - using the

number buttons. To change the PIN, use

the Change PIN function. Each time you

access the Security Settings hereafter,

you must enter that four digit PIN. If you

don’t change the PIN, continue using

the default PIN.

BD Parental Rating

Prevents playback of Blu-ray Discs

with specific age ratings unless the 4

digit PIN is entered.

Anynet+ (HDMI-CEC)

Anynet+ is a convenient function that

offers linked operations with other

Samsung players that have the Anynet+

feature.

To operate this function, connect this

player to an Anynet+ Samsung TV with

an HDMI cable.

With Anynet+ on, you can operate this

player using a Samsung TV remote

control and start disc playback simply

by pressing the PLAY

( ) button on the TV’s remote

control.

For more information, please see the TV

user manual.

✎

NOTES

This function is not available if the HDMI cable

does not support CEC.

If your Samsung TV has an Anynet+ logo, then

it supports the Anynet+ function.

Depending on your TV, certain HDMI output

resolutions may not work.

Please refer to the user manual of your TV.

If you have Anynet+ turned on, when you

turn off the product, disconnect, and then

reconnect the power cable, the product turns

on automatically to re-establish the Anynet+

connection. After about 15 seconds, it turns off

again automatically.

Some Samsung TVs, when connected to this

product using the Anynet+ function will, when

you turn them on, display a warning popup

message saying no connection has been

found. Never-the-less, the Anynet+ connection

is properly established and available to use.

BD Data Management

Enables you to manage the downloaded

contents you accessed through a Blu-

ray disc and stored on a flash drive.

You can check the device’s information

including the storage size, delete the

BD data, or change the Flash memory

device.

✎

NOTES

In the external memory mode, disc playback

may be stopped if you disconnect the USB

device in the middle of playback.

Your player supports the FAT16, FAT32, and

NTFS file systems. We recommend you use

USB devices that support USB 2.0 protocol

with 4 MB/sec or faster read/write speed.

The Resume Play function may not work after

you format the storage device.

The total memory available to BD Data

Management may differ, depending on the

conditions

DVD Parental Rating

This function works in conjunction with

DVDs that have been assigned an age

rating or numeric rating that indicates

the maturity level of the content. These

numbers help you control the types of

DVDs that your family can watch.

Select the rating level you want to set.

For example, if you select Level 6,

discs rated above 6 - Level 7 and 8 -

will not play.

A larger number indicates more mature

content.

Change PIN

Change the 4-digit password used to

access security functions.

If you forget your password

Remove any discs.

Press and hold the

button on the

front panel for 5 seconds or more.

All settings will revert to the factory

settings.

✎

NOTES

When the factory default settings are restored,

all the user stored BD data will be deleted.

BD_H4500_ZC-ENG-01 VE.indd 12 10/29/14 4:02 AM

Support Settings

Software Upgrade

The Software Upgrade menu allows

you to upgrade the player’s software for

performance improvements or additional

services.

By USB

To upgrade by USB, follow these

steps:

1. Visit www.samsung.com/

bluraysupport.

2. Download the latest USB software

upgrade zip archive to your

computer.

3. Unzip the zip archive to your

computer. You should have a

single RUF file with the same name

as the zip file.

4. Copy the RUF file to a USB flash

drive.

5. Make sure there is no disc in the

player, and then insert the USB

flash drive into the USB port of the

player.

6. In the player’s menu, go to

Settings > Support > Software

Upgrade.

7. Select By USB.

✎

NOTES

No disc should be in the product when you

upgrade the software using the USB Host jack.

When the software upgrade is done, check

the software details in the software Upgrade

menu.

Do not turn off the player during the

software upgrade. It may cause the player to

malfunction.

Software upgrades using the USB Host jack

must be performed with a USB flash memory

stick only.

Contact Samsung

Provides contact information for

assistance with your player.

Reset

Returns all settings to their factory

defaults.

Media Play

Playing a Commercially

Recorded Disc

Press the

button to open the

disc tray.

Place a disc gently into the disc tray

with the disc's label facing up.

Press the

button to close the disc

tray. Playback starts automatically.

Playing Files on a USB

Device

There are two methods you can use

to play or view multimedia files located

on a USB device through your player.

Method 1

Turn the player on.

Connect the USB device to the USB

port on the front panel of the player.

The New Device Connected pop-up

appears.

Change Device

Settings

Play Disc Photos Videos Music

Empty disc tray

New device connected.

Photos

Videos

Music

123

Move

Enter

Return

✎

NOTES

If the pop-up does not appear, go to Method 2.

Use the ▲▼ buttons to select

Photos, Videos or Music, and then

press the

button. The Photos,

Videos & Music screen appears

listing the content of the device.

Depending on how the contents is

arranged, you will see either folders,

individual files, or both.

✎

NOTES

Even though the player will display folders for

all content types, it will only display files of

the Content Type you selected in Step 3. For

example, if you selected music, you will only

be able to see music files. You can change this

selection by returning to the Photos, Videos &

Music screen and going to Step 3 in Method 2

below.

If necessary, use the ▲▼◄►

buttons to select a folder, and then

press the

button.

Select a file to view or play, and then

press the

button.

Press the RETURN button to exit a

folder or the EXIT button to return to

the Home screen.

Go to pages 14~16 for instructions

that explain how to control playback

of videos, music, and pictures on a

USB device.

BD_H4500_ZC-ENG-01 VE.indd 13 10/29/14 4:02 AM

Method 2

Turn the player on.

Connect the USB device to the USB

port on the front panel of the player.

Select Change Device and then

press the ▲▼ button to select USB.

Press the

button.

Change Device

Settings

Play Disc

Photos Videos Music

Empty disc tray

Change Device

No Disc

123

Use the ▲▼◄► buttons to select

Photos, Videos or Music on the

Home screen, and then press the

button. The Photos, Videos &

Music screen appears listing the

content of the device. Depending on

how the contents is arranged, you

will see either folders, individual files,

or both.

✎

NOTES

Even though the player will display folders for

all content types, it will only display files of

the Content Type you selected in Step 3. For

example, if you selected music, you will only

be able to see music files. You can change this

selection by returning to the Photos, Videos &

Music screen and repeating Step 3

If necessary, use the ▲▼◄►

buttons to select a folder, and then

press the

button.

Use the ▲▼◄► buttons to select

a file to view or play, and then press

the

button.

Press the RETURN button to exit a

folder or the EXIT button to return to

Home screen.

Go to pages 14~16 for instructions

that explain how to control playback

of videos, music, and pictures on a

USB device.

✎

NOTES

If you insert a disc when playing a USB

device, the device mode changes to "Disc"

automatically.

Playing a Disc with User

Recorded Content

You can play multimedia files you have

recorded on Blu-ray, DVD, or CD discs.

Place a user recorded disc into the

disc tray with the disc’s label facing

up, and then close the tray.

Use the ◄► buttons to select the

type of content you want to view or

play - Videos, Photos, or Music -

and then press the

button.

✎

NOTES

Even though the player will display folders for

all content types, it will only display files of

the Content Type you selected in Step 2. For

example, if you selected music, you will only

be able to see music files. You can change this

selection by returning to the Home screen and

repeating Step 2.

A screen appears listing the

contents of the disc. Depending on

how the contents are arranged, you

will see either folders, individual files,

or both.

If necessary, use the ▲▼◄►buttons

to select a folder, and then press the

button.

Use the ◄►▲▼ buttons to select

a file to view or play, and then press

the

button.

Press the RETURN button one or

more times to exit a current screen,

exit a folder, or to return to the Home

screen. Press the EXIT button to

return directly to the Home Screen.

Go to pages 14~16 for instructions

that explain how to control playback

of videos, music, and pictures on a

disc.

Controlling Video Playback

You can control the playback of video

content located on a Blu-ray disc, DVD,

CD, or USB device. Depending on the

media, some of the functions described

in this manual may not be available.

During Blu-ray or DVD disc playback,

the Full screen button does not operate.

Buttons on the Remote Control

used for Video Playback

SCREEN

VIEW A-B

FULLBONUS REPEAT REPEAT

Playback related buttons

The player does not play sound in

Search, Slow or Step mode.

•

To return to normal speed playback,

press the

button.

button

Starts playback.

button

Stops playback.

button

Pauses playback.

Fast Motion

Play

During playback, press the

button.

Each time you press the

button, the playback speed will

change.

Slow Motion

Play

In pause mode, press the

button.

Each time you press the

button,

the playback speed will change.

Step Motion

Play

In pause mode, press the

button.

Each time you press the

button,

a new frame appears.

Skip Motion

Play

During playback, press the

button.

Each time you press the

button, the disc moves to the

previous or next chapter or file.

BD_H4500_ZC-ENG-01 VE.indd 14 10/29/14 4:02 AM

Off

Songs are played in the order in

which they were recorded.

( ) Track

The current song is repeated.

( ) All

All songs are repeated.

( ) Shuffle

Shuffle plays songs in random

order.

Playlist

To move to the Music List, press the

or RETURN button.

The Music List screen appears.

Select Tools

( )

Jump Page

Return

1/2 Page

Music

TRACK 001