BEST BUY essentials BE-MQM10W22W 10W Magnetic Wireless Charger Mode d'emploi

Marque
BEST BUY essentials
Modèle
BE-MQM10W22W 10W Magnetic Wireless Charger
Taper
Mode d'emploi
Package contents
• 10 W Magnetic Wireless Charger with 6 ft. (1.8 m) cable
• Quick Setup Guide
Compatibility
• Apple iPhone 12 series and 13 series
• Any Qi-enabled devices including smartphones, headphones, and
smart watches
Features
• Wirelessly charges the iPhone 12 series and 13 series (7.5W) or
Android devices (10 W)
• Attaches to the back of your iPhone 12 series and 13 series using a
magnetic connector
• Plugs into wall adapters, car chargers and more using an attached
USB-C cable (adapter not included)
• Gives you exible placement options with a 6 ft. (1.8 m) cable
• Sleek white housing for a clean, unobtrusive look
• Built and backed by Best Buy
Note: For best results, use without a case, with a thin case or with a case that has
a magnetic MagSafe array. Must be used with a 20 W (or higher) wall adapter.
Before using your new product, please read these instructions to prevent any damage.
Using your charging pad
1 Plug the USB-C end into a 20 W or higher power adapter (not
included). Plug the adapter into a power outlet.
2 Place your Qi-enabled device on the center of your wireless charger
with the screen facing out. Your device starts charging.
Note: The iPhone 12 series and 13 series will directly attach to the wireless
charger.
Troubleshooting
Device is not charging or charges slowly.
• Make sure that your 20 W or higher power adapter
(not included) is connect to a working power outlet.
• Make sure that your device is positioned in the center of your
charging pad.
• Make sure that there are no other objects on the charging pad.
• Try removing your device’s case.
• Make sure that your device is Qi-enabled.
• Make sure that the AC wall adapter you are using is 20 W or
higher.
• Using the phone while it is charging will make it charge more
slowly.
• Your device may charge more slowly with the charging pad
than a charging cable. This is normal.
My device gets warm while charging
• It is normal for devices to get warm while charging.
USB-C
AC wall adapter Power outlet
Wireless
charger
Magnetic Wireless
Charger
Quick Setup Guide
BE-MQM10W22W
BE-MQM10W22W_21-0887_QSG_V2_EN_Final.eps 1 10/14/2021 10:25:03 AM
WARNING:
• People with pacemakers should keep away from the magnets. The magnets can negatively aect the
function of the pacemaker.
• Do not place any bank or similar cards with magnetic strips or magnetically sensitive objects on the
product. The data on the cards could be damaged or completely deleted.
• Ensure that there are no metal parts on the back of your device. Metal heats up signicantly in the eld of
an induction charger and can damage your device and/or the charger.
Legal notices
FCC Information
FCC Caution: Changes or modications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC statement: This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20 cm between the radiator
and your body. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
RSS-Gen statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation
of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
This equipment complies with IC RSS‐102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm between
the radiator and your body.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR‐102 établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de
20 cm entre le radiateur et votre corps.
One-year limited warranty
Visit www.bestbuy.com/bestbuyessentials for details.
Contact Best Buy essentials
For customer service, call 866-597-8427 (U.S. and Canada)
www.bestbuy.com/bestbuyessentials
Best Buy essentials is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2021 Best Buy. All rights reserved.
Specications
Dimensions: 2.3 × 2.3 × 0.3 in. (58 × 58 × 8.5 mm)
Input: DC 5 V/3 A, 9 V/2.22 A
Output: 5 W/7.5 W/10 W max.
Cable length: 6 ft. (1.8m)
Safety information
• Avoid dropping.
• Do not disassemble.
• Do not place metal objects between devices and the wireless charging pads.
• Thick protective cases (≥ .1 in. [3 mm]) or a case that includes a magnet or metallic material (except
MagSafe phone cases), may not allow proper charging function.
• Keep wireless charging pad away from any liquid or moisture.
• The maximum ambient temperature during use of this product must not exceed 104° F (40° C).
• Do not place this device in re or other excessively hot environments.
• This product is intended for home oce use.
• For indoor use only.
• Consult local sta before using the product near medical or industrial equipment or on board an aircraft.
• Prevent cables from being pinched or damaged.
• A damaged cable or device may malfunction and/or overheat. (Fire hazard).
• Unplug the product if not used for an extended period of time.
V2 ENGLISH 21-0887
BE-MQM10W22W_21-0887_QSG_V2_EN_Final.eps 2 10/14/2021 10:25:03 AM
  • Page 1 1
  • Page 2 2

BEST BUY essentials BE-MQM10W22W 10W Magnetic Wireless Charger Mode d'emploi

Marque
BEST BUY essentials
Modèle
BE-MQM10W22W 10W Magnetic Wireless Charger
Taper
Mode d'emploi
Télécharger le PDF
rapport

dans d''autres langues

Autres documents