SportsArt UB521M Le manuel du propriétaire

UB521M

Upper Body Ergometer

Owner’s Manual

Sports Art Industrial Co., Ltd. ISO 9001/14001 Certied 2016.01

No. 11, Gong Huan Rd. Tainan City, Taiwan R.O.C. www.gosportsart.com

UB521M OWNER’S MANUAL CONTENTS

1. INTRODUCTION ................................................................................ 2

2. SAFETY PRECAUTIONS .................................................................. 3

3. LIST OF PARTS ................................................................................. 5

4. ASSEMBLE THE PRODUCT ............................................................. 7

STEP 1 Secure the Pedestal ................................................................. 8

STEP 2 Secure the Front Support ......................................................... 9

STEP 3 Secure the End Cover .............................................................. 9

STEP 4 Secure the Horizontal Bar and Covers ..................................... 10

STEP 5 Install Handles .......................................................................... 11

STEP 6 Install Footplates ....................................................................... 11

STEP 7 Move the Product into Place ..................................................... 13

STEP 8 Level the Product ...................................................................... 14

STEP 9 Install the Power Cord ............................................................... 14

STEP 10 Install the Seat Assembly ........................................................ 15

STEP 11 Install the Handlebars .............................................................. 15

STEP 12 Install the Seat Back ............................................................... 16

STEP 13 Install the Seat Bottom ............................................................ 16

5. MECHANICAL ADJUSTMENTS ........................................................ 17

ADJUSTMENTS Seat Base Installation and Removal .......................... 17

ADJUSTMENTS Seat Height Adjustment .............................................. 18

ADJUSTMENTS Wheelchair Installation ............................................... 19

ADJUSTMENTS Operating the Product while Standing ........................ 20

ADJUSTMENTS Operating the Proudct while Seated ........................... 20

ADJUSTMENTS Operating the Product from a Wheelchair .................. 21

ADJUSTMENTS Operating Handles ..................................................... 21

ADJUSTMENTS Adaptations for Daily Operation .................................. 22

6. UNDERSTAND THE UB512M DISPLAY ........................................... 23

DISPLAY Overview ................................................................................ 23

DISPLAY Windows ................................................................................. 24

DISPLAY Keys ....................................................................................... 24

DISPLAY Specications ......................................................................... 25

7. OPERATE THE UB521M ................................................................... 25

OPERATION Quick Start ....................................................................... 25

OPERATION Start .................................................................................. 26

OPERATION Workout Programs ........................................................... 27

OPERATION Cool Down ........................................................................ 29

OPERATION User Preferences and Part Versions ................................ 29

8. ABOUT HEART RATE DETECTION .................................................. 31

HEART RATE Telemetry ........................................................................ 31

HEART RATE Contact ........................................................................... 31

9. GUIDELINES FOR EXERCISE ......................................................... 32

10. MAINTENANCE ............................................................................... 33

MAINTENANCE How to Replace a Fuse ............................................... 33

MAINTENANCE Schedule ..................................................................... 34

MAINTENANCE Task List ...................................................................... 35

MAINTENANCE One-Year Maintenance Log ........................................ 36

MAINTENANCE Electronics Block Diagram .......................................... 37

11. SAFETY PRECAUTIONS IN FRENCH ............................................. 38

2

1. INTRODUCTION

Congratulations on the purchase of a high quality SportsArt product, the UB521M

upper body ergometer. Constructed of high quality materials and designed for years

of reliable usage, this product was made for physical therapy, physical rehabilitation,

and commercial tness venues.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of

this product will help ensure that exercisers obtain their tness goals safely and

successfully.

3

2. SAFETY PRECAUTIONS

This product was designed and built for optimum safety. However certain precau-

tions apply during the use of this product. Please note the following safety

precautions:

• Please read the entire manual before assembly and operation. Make

sure the product is installed and operated as instructed in this manual.

• Assemble and operate the product on a solid, level surface. Do not use

outdoors or near water, including pools and saunas.

• Check the product before every use. Make sure all parts are assem-

bled, and all fasteners are tightened. Do not use the product if it is disas-

sembled in any way.

• Wear proper workout clothing. Do not wear loose clothing. Do not wear

shoes with leather soles or high heels. Tie all long hair back. Do not go

barefoot on this product.

• Keep away from moving parts. Moving parts may or may not stop imme-

diately if an object becomes caught or impedes normal motion.

• Use this product only for its intended purpose as described in this

manual.

• Be careful when mounting and dismounting the unit.

• Never operate this product if it has been damaged in any way. If it is

not working properly, or has been dropped or damaged, contact a service

technician for repairs.

• Do not use accessories that are not specically recommended by the

manufacturer. Such parts might cause injuries or cause the unit to fail.

• Keep all air ventilation areas free of blockage. Never drop or insert any

object into any opening.

• Do not operate where aerosol (spray) products are being used or where

oxygen is being administered.

• This product is not intended for use by persons (including children) with

reduced physical, sensory, or mental capabilities, or by people who are

otherwise decient in product knowlege or experience. If such people use

this product, they should be given training and be supervised at all times

by someone responsible for their safety.

• Children should be supervised to ensure that they do not play on or

near the product.

• The user weight limit for this product is 227 kg, 500 lb. At maximum

resistance, this product meets standards for users up to 150 kg, 330 lb.

CAUTION: If you feel any pain or abnormal sensations, STOP YOUR

WORKOUT and consult your physician immediately. Work within your

recommended exercise level. DO NOT work to exhaustion. Before beginning

any exercise program, you should consult with your doctor. It is recommended that

you undergo a complete physical examination.

WARNING! Heart rate monitoring systems may be inaccurate. Too much exercise

may result in serious injury or death. If you feel faint, stop exercising immediately.

4

2. SAFETY PRECAUTIONS (CONTINUED)

Note: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential instal-

lation. This equipment generates, uses and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that inter-

ference will not occur in a particular installation. If the user desires to correct the

interference, it is at the user’s own expense.

WARNING! Only qualied technicians should be allowed to contact electrical

components such as circuit boards. Some components carry an electrical charge

even after use has been discontinued or the product has been unplugged. For

products with power cords, turn off unit power, wait ve minutes, then disconnect

the power cord from the power socket. For products without power cords, let the unit

sit without use for ve minutes. Only after taking such precautions should covers be

removed and electrical components be accessed.

• Do not attempt to drag or carry this unit by the power cord. Keep the

power cord away from heated surfaces.

• Improper grounding can increase the risk of electric shock. Check with

a qualied electrician if you are in doubt as to whether the power outlet is

properly grounded.

• Do not attempt to modify the plug provided with this product. Proper

power supply must be provided. If the plug does not t an outlet, contact a

qualied electrician to inspect or modify power in the facility.

5

3. LIST OF PARTS

Assembly Parts

No. Name Qty. No. Name Qty.

A1 Main body 1 A10 Seat back 1

A2 Front support 2 A11 Seat back support 1

A3 Horizontal bar 2 A12 Seat bottom 1

A4 Right side cover 1 A13 Handlebars 2

A5 Left side cover 1 A14 Bottle holder 1

A6 Handle 1 A15 Seat base 1

A7 Round sticker 1 A16 Power cord 1

A8 Footplate set 1 A17 Hardware kit 1

A9 End cover 1 A18 Silicone lubricant 1

6

Components in the Hardware Kit

No. Name Qty. Specication Notes

10 Mushroom top Phillips screw 2 M4*L25

11

Mushroom top Phillips screw 3 M4*L25

with

cap

Flat washer 6 D8*d4*t1.0

12 Screw insert 4

SportsArt lubricant (66A) 1

L-shaped Allen wrench 1 M4

L-shaped Allen wrench 1 M5

L-shaped Allen wrench 1 M6

L-shaped Allen wrench 1 M8

Double open-end wrench 1 13*17

Screwdriver handle 1 green

Screwdriver shank 1 Phillips+at

Fuse 1 110V or 220V

Components on the Product

No. Name Specication Notes

21

Inner hex screw M8*L65

Spring washer M8

Flat washer D17*d8.3*t2

Hex lock nut M8

22

Flat washer D21*d10.5*t2

Spring washer M10

Inner hex screw M10*L20

Serrated washer D10

23 Phillips screw M5*PO.8*L15

24

Inner hex screw M6*L15

Curved washer D20*d7*t2

25 Inner hex screw M6*L15

26 Beveled head inner hex screw M6*L15

27 Phillips screw M4*P0.7*L10

28

Inner hex screw M8*L20

Spring washer M8

Flat washer D17*d8.3*t2

Hex lock nut M8

29 Mushroom top Phillips screw M5*0.8*L12

7

Components on the Product, Continued

No. Name Specication Notes

30

Inner hex screw M6*L20

Spring washer M6

Flat washer D16*d6.3*t2

31

Flat washer D16*d6.3*t2

Spring washer M6*t1.5

Mushroom top inner hex screw M6*P1.0*L20

32

Inner hex screw M8*L20

Spring washer M8

Flat washer D17*d8.3*t2

4. ASSEMBLE THE PRODUCT

Follow instructions below to assemble this product. Note that in this manual the

words “left” and “right” are used to refer to the product and its parts. As such, these

designations correspond to the “left” and “right” sides of a person in position to

exercise on this product. Also, for brevity, the word “screws” is used where screws,

washers, and other hardware may be involved. The illustration below provides an

overview of assembly steps one through ve.

8

STEP 1 Secure the Pedestal

Please follow instructions (a) through (c) to secure the pedestal.

(a) First, remove screws (22) from the pedestal mount on the main body (A1).

(b) Lift the main body but avoid pinching the cable.

(c) Secure screws (22) into place.

A

B

C

#1

#2

#3

9

STEP 2 Secure the Front Support

Please follow instructions (a) through (c)

to install the front support.

(a) First, remove screws (21) from the front

support (A2).

(b) Before installing the front support (A2),

prop up the base of the product. Then

insert the front support (A2) onto the base

of the main body (A1). Align the four screw

holes. Then remove the material used to

prop up the base of the main body.

(c) Secure the screws (21) that had been

removed previously.

STEP 3 Secure the End Cover

Please follow instructions (a) through (b) to

install the end cover.

(a) First, remove screws (23) from the glide

track of the main body (A1).

(b) Insert the end cover (A9) onto the glide

track of the main body (A1). Then use

screws (23) to secure it into place.

(c)

(b)

(a)

(b)

(a)

10

STEP 4 Secure the Horizontal Bar and Covers

Please follow instructions (a) through (e) to install the horizontal bar and left

and right side covers.

(a) First, remove screws (24)(25) from the horizontal bar (A11) that supports

the footrest.

(b) Insert the horizontal bar (A3) into the base of the main body (A1). Use

screws (24) to secure the horizontal bar into place. Then insert the screw

sockets (12) into place in three locations.

(c) Push the water guard ring upward on the pedestal. Put left and right

side covers (A4,A5) into place around the horizontal bar (A3), and snap the

covers into place together.

(d) Use screws (10)(11) to secure left and right side covers (A4,A5). Then snap

the screw cap into place. Make sure that there are two washers underneath

the screw.

(e) Slide the water guard ring down into place on the product.

(c)

(b)

(a)

(d)

(e)

11

STEP 5 Install Handles

Please follow instructions (a) through

(c) to install handles.

(a) Remove screws (26) on the left

and right cranks, and remove the end

cover.

(b) Insert the handle (A6) onto the

crank spindle. Push the handle inward

until the O-ring touches the handle.

(c) Secure the end cap and screw (26)

that had been removed. Insert the

round sticker (A7) into place. Follow

the same procedure to secure the

handles on both sides of the product.

STEP 6 Install Footplates

The illustration below provides an overview of this step.

(c)

(b)

(a)

12

STEP 6 Install Footplates (Continued)

Please follow instructions (a) through (b) below to install footplates.

(a) Insert footplates (A8) onto the horizontal rod (A3). If you are using the

optional wheelchair strap, thread the strap into position as shown in illustration

A. If you are not using the wheelchair strap, insert the footplate into place as

shown in illustration B.

(b) Flip the footplates (A8) upside down as shown. Secure screws (25) into

place. (Note: The screws must secure the metal piece between them.) Then

flip the footplates into position for use.

(b)

(a)

A

B

13

STEP 7 Move the Product into Place

Please follow instructions (a) through (c) to move the product into place for

use.

(a) First, make sure footplates are in the position shown below. Grip the end

of the glide track. (Note: Do not hold onto the plastic end cover.)

(b) Lift the unit.

(c) Set the footplates upright. Then use the transport wheels to roll the

product into place. Do not move the product if footplates are pushed forward

and upside down (see the illustration with the X mark).

(c)

(a)

(b)

14

STEP 8 Level the Product

Follow steps (a)

through (b) to

level the product.

(a) Rotate

the levelers

downward until

the foot touches

the floor.

(b) Then rotate

the nut upward,

against the

product, to secure

the leveler into

place.

STEP 9 Install the Power Cord

First, remove

screws (27) near

the power cord

connector on the

product. Insert

the power cord

(A16) into the

socket on the

product. Secure

screws (27). Then

insert the plug on

the other end of

the power cord

into an electrical

outlet with the

proper voltage.

(a)

(b)

15

STEP 10 Install the Seat Assembly

The illustration below shows the seat assembly. It shows the final result of

the next three steps.

STEP 11 Install the Handlebars

Please follow instructions (a) through (d) to install the handlebars and bottle

holder.

(a) Remove screws (28) on the handlebars (A13).

(b) Set the handlebars (A13) into place on the seat base (A15). Secure it with

screws (28).

(c) Remove screws (29) on the handlebars (A13).

(d) Use screws (29) to secure the bottle holder (A14) into place.

(d)

(c)

(b)

(a)

16

STEP 12 Install the Seat Back

Please follow steps (a through d) below to install the seat back support and

the seat back.

(a) Remove screws

(28) from the seat

back support (A6).

(b) Insert the seat

back support (A6)

into its mount on

the seat base (A1),

and use screws

(28) to secure it

into place.

(c) Remove screws

(29) from the seat

back support (A5).

(d) Hold the seat

back (A5) in place

on its support (A6),

and use screws

(29) to secure it

into place.

STEP 13 Install the Seat Bottom

Please follow instructions (a) through (b) to install

the seat bottom.

(a) Remove screws (32) from the seat bottom (A12).

(b) Set the seat bottom (A12) on its mount on the

seat base (A1). Secure it with screws (32).

(d)

(c)

(b)

(a)

(b)

(a)

17

5. MECHANICAL ADJUSTMENTS

Designed to accommodate different exercisers and modes of operation, this

product offers several mechanical adjustments, all of which are explained

below.

ADJUSTMENTS Seat Base Installation and Removal

Align the seat base with the glide track. Lift the lever under the seat or push

down on the foot lever. Push the seat base onto the glide track. At a suitable

position, release the lever to secure the seat base into this location. To

remove the seat base, lift the lever and pull the seat base out from the end

of the glide track.

18

ADJUSTMENTS Seat Height Adjustment

To adjust the seat height, take your weight off the seat. Lift the lever on the

left side. Adjust the seat height to the desired position. Release the lever.

19

ADJUSTMENTS Wheelchair Installation

To make room for a wheelchair, first, remove the seat base from the glide

track as shown above. Then follow instructions (A), (B), and (C) to secure the

wheelchair into place.

(A) Flip the footplates up as shown.

(B) Push the wheelchair into place to operate the product, but do not bump

product covers.

(C) Secure the set straps onto the wheelchair as follows. First, wrap the

ends of the straps around the tubes of the wheelchair, and clasp the ends

to secure the straps into place as shown. Pull the strap ends to adjust strap

length. After securing the straps, adjust the position of the product’s body

and display as necessary.

B

A

C

La page charge ...

SportsArt UB521M Le manuel du propriétaire

SportsArt UB521M Le manuel du propriétaire

dans d''autres langues

Documents connexes