Intermec Sabre 1551B Quick Reference Manual

Marque: Intermec

Modèle: Sabre 1551B

Catégorie: Lecteurs de codes à barres

Taper: Quick Reference Manual

P/N 065542-003

1551B Decoding

Laser Scanner

Quick

Reference

Guide

1233*1233*

FranklinGothic Helv Condensed

Intermec Technologies Corporation

6001 36th Avenue West

P.O. Box 4280

Everett, WA 98203-9280

U.S. service and technical support: 1-800-755-5505

U.S. media supplies ordering information: 1-800-227-9947

Canadian service and technical support: 1-800-688-7043

Canadian media supplies ordering information: 1-800-268-6936

Outside U.S. and Canada: Contact your local Intermec service

supplier.

The information contained herein is proprietary and is provided

solely for the purpose of allowing customers to operate and/or

service Intermec manufactured equipment and is not to be

released, reproduced, or used for any other purpose without the

written permission of Intermec.

Information and specifications in this manual are subject to

change without notice.



1998 by Intermec Technologies Corporation

The word Intermec, the Intermec logo, JANUS, IRL, TRAKKER,

Antares, Adara, Duratherm, EZBuilder, Precision Print,

PrintSet, Virtual Wedge, and CrossBar are trademarks of

Intermec Technologies Corporation.

Throughout this manual, trademarked names may be used.

Rather than put a trademark (





) symbol in every

occurrence of a trademarked name, we state that we are using

the names only in an editorial fashion, and to the benefit of the

trademark owner, with no intention of infringement.

1233*1233*

FranklinGothic Helv Condensed

iii

Contents

Overview of the 1551B Laser Scanner 1

Unpacking the 1551B Laser Scanner 2

Understanding the Scanner Features 3

Light 3

Beeps 3

Electrical Rating 4

Ordering Cables 4

Connecting the 1551B Laser Scanner 7

Operating the 1551B Laser Scanner 8

Hand-Held Scanning 8

Hands-Free Scanning 9

Configuring the Marker Beam 10

Configuring for Selected Terminals 11

Troubleshooting the 1551B Laser Scanner 13

Maintaining the 1551B Laser Scanner 14

Accessories for the Scanner 15

Regulatory Statements for Users in Canada and the

United States 16

Industry Canada Compliance 16

Federal Communications Commission

Compliance 16

Laser Compliance and Precaution 17

Agency Approvals 17

Scanner Laser Labels 18

Code 39

Regulatory Statements For Users Outside of Canada and

the United States 19

European Union Compliance 19

Agency Approvals 20

Additional EMI/RFI Compliance 20

1551 Laser Compliance and Precaution 20

Patents 22

Overview of the 1551B Laser Scanner

The Intermec 1551B Laser Scanner delivers quick, effortless bar

code scanning. You can use each type of scanner with a portable

terminal in Wand Emulation mode, but it is also designed to

collect data for a specific type of terminal as listed in this table.

Scanner Terminal

1551B0200 Compatible with DEC VT220/320/420 and devices

equipped with an RS-232 PC serial port or terminal

serial port.

1551B0202 A long-range optics scanner with RS-232 PC or

terminal serial ports that is compatible with the same

devices as the 1551B0200.

1551B0204 A high-visibility optics scanner with RS-232 PC or

terminal serial ports that is compatible with the same

devices as the 1551B0200.

1551B0205 A high-density optics scanner with RS-232 PC or

terminal serial ports that is compatible with the same

devices as the 1551B0200.

1551B0300 Compatible with these terminals:

• IBM 4683/4684/4693/4694

Compatible with these terminals with optical coupled

interface adapter (OCIA) hardware:

• NCR 1255, 2126/2127, 2123/7058, 2152*/2153*, 2950*

• NCR 2552, 7050/7051/7052/7053

1551B0700 Keyboard wedge interface for use with these

personal computers:

• IBM PC XT/AT or PS/2 Mod 30/50/60/80

compatible

• IBM 3151, 317X/318X/319X, 347X

• IBM Thinkpad

• Apple MAC ADB

• Zenith CruisePAD

• Laptops

Code 39

Colors and Configurations (continued)

Scanner Terminal

1551B0702 A long-range optics scanner with keyboard interface

for use with the same personal computers as the

1551B0700.

1551B0704 A high-visibility optics scanner with keyboard

interface for use with the same personal computers

as the 1551B0700.

1551B0705 A high-density optics scanner with keyboard

interface for use with the same personal computers

as the 1551B0700.

* Requires an external power supply. See the footnote on page 6 for part

numbers.

Terminals are continually being added to this list.

Consequently, some of the most recent additions may not be

shown here. Contact your local Intermec representative for a

current list.

Unpacking the 1551B Laser Scanner

Your 1551B laser scanner was thoroughly tested and inspected

before it was shipped from the factory. The shipping box

contains the laser scanner and this document.

Note:

You must order the appropriate interface cables separately. See

“Ordering Cables” later in this guide for help. For help configuring

your scanner, you may also need to order a 1551B Decoding Laser

Scanner User’s Manual (Part No. 066104) or find the manual on the

internet at www.intermec.com/manuals/1551b/1551.htm.

If any of these items are missing or damaged, please contact

your local Intermec representative. Retain the shipping box in

case you need to ship the scanner.

Understanding the Scanner Features

Please acquaint yourself with these important parts of the

scanner before continuing.

Light

The light indicates the status of the scanner.

Color Description

Yellow The device is scanning.

Green The bar code has been successfully scanned.

None The device is not scanning.

Beeps

The scanner emits these beeps to indicate either a successful

scan or a situation that requires your attention.

Beep Description

One medium beep A bar code has been read successfully

and you may scan another.

Two beeps (High Low) A command bar code has been scanned.

Two medium beeps The scanner has been turned on.

Three medium beeps Indicates an error. See “Troubleshooting

the 1551B Laser Scanner” later in this

guide.

Code 39

1551B Laser Scanner Features

Light

Sound port

Trigger

Scan

window

Cable

1551Q.001

Electrical Rating

The 1551B laser scanner electrical ratings are

4,5 to 12V;

215 mA.

Ordering Cables

To order a cable, contact your local Intermec representative. Use

this table to determine which cable to order.

1551B020X

Reader/Terminal Cable Connector Length Part No.

DEC VT220/320/420 8 Pin Modular 6’ (1.83m) 064039-050

Intermec 944X, 9430,

95XX

RJ11 Modular 6’ (1.83m) 064039-011

Intermec 9465/9450 11 Pin Fisher 6’ (1.83m) 064039-046

Intermec J2010,

JG2010, 97XX, T242X

10 Pin Modular 6’ (1.83m) 064039-012

RS-232 DCE

25 Pin D-Sub 6’ (1.83m) 064039-001

RS-232 DCE

25 Pin D-Sub 25’ (7.71m) 064039-049

RS-232 DCE

9 Socket D-Sub 6’ (1.83m) 064602-001

1551B020X

(

continued

)

Reader/Terminal Cable Connector Length Part No.

RS-232 DCE

25 Socket D-Sub 6’ (1.83m) 064039-002

RS-232 DCE** 9 Pin D-Sub 6’ (1.83m) 064039-039

RS-232 DCE* 9 Socket D-Sub 6’ (1.83m) 064039-042

RS-232 DCE* 9 Pin D-Sub 6’ (1.83m) 064039-043

RS-232 DCE** 9 Socket D-Sub 20’ (6.10m) 064039-044

RS-232 DTE

25 Pin D-Sub 6’ (1.83m) 064039-003

RS-232 DTE

25 Socket D-Sub 6’ (1.83m) 064039-004

RS-232 DTE** 9 Socket D-Sub 6’ (1.83m) 064039-040

RS-232 DTE** 9 Pin D-Sub 6’ (1.83m) 064039-041

RS-232 DTE** 9 Socket D-Sub 20’ (6.10m) 064039-045

MaxiLAN CX, DX* 9 Socket D-Sub 6’ (1.83m) 064039-042

1551B0300

IBM 4683 Port 9A/9B,

4684, 4693, 4694

4 Position SDL 6’ (1.83m) 064039-005

IBM 4683 Port 5B 8 Position SDL 6’ (1.83m) 604039-013

Intermec 944X, 9430,

95XX

RJ11 Modular 6’ (1.83m) 064039-021

Intermec J2010,

JG2010, 97XX, T242X

10 Pin Modular 6’ (1.83m) 064039-022

NCR 1255 Mod IV 12 Position 6’ (1.83m) 064039-014

NCR 2123 10 Pos JAE 6’ (1.83m) 064039-015

NCR 2126 10 Pos Socket Strp 6’ (1.83m) 064039-016

NCR 2127 15 Pos JAE 6’ (1.83m) 064039-017

NCR 2152

/53

2552/2950*

Mod IV Connector 6’ (1.83m) 064039-018

NCR 7050/51 9 Pin D-Sub 6’ (1.83m) 064039-019

NCR 7052/53 10 Pin Modular 6’ (1.83m) 064039-020

NCR 7058 10 Pos JAE 6’ (1.83m) 064039-015

1551B070X

ADI 1496 Y 5 Pin DIN 6’ (1.83m) 064039-008

Apple Mac ADB Y 4 Pin Mini-DIN 6’ (1.83m) 064039-024

Bull BDS-7 (HDS-7) Y 5 Pin DIN 6’ (1.83m) 064039-008

Code 39

1551B070X

(

continued

)

Reader/Terminal Cable Connector Length Part No.

DEC VT510/520 Y 6 Pin Mini-DIN 6’ (1.83m) 064039-006

Esprit 200, 400 Y 6 Pin Mini-DIN 6’ (1.83m) 064039-006

Falco 5220 Y 5 Pin DIN 6’ (1.83m) 064039-008

IBM 3151, 347X Y 8 Pin Modular 6’ (1.83m) 064039-007

IBM 317X, 318X, 319X 5 position DIN 6’ (1.83m) 064039-030

IBM ThinkPad 6 Pin Mini-DIN 6’ (1.83m) 064039-025

Intermec 944X, 9430,

95XX

RJ11 Modular 6’ (1.83m) 064039-011

Intermec 9465/9450 11 Pin Fisher 6’ (1.83m) 064039-046

Intermec J2010,

JG2010, 97XX, T242X

10 Pin Modular 6’ (1.83m) 064039-012

Laptops, PS2 style 6 Pin Mini-DIN 6’ (1.83m) 064039-053

Laptops, PS2 style 6 Pin Mini-DIN 12’ (3.65m) 064039-054

Lee Data IIS Y 5 Pin DIN 6’ (1.83m) 064039-008

Mac Power Book Laptop 4 Pin Mini-DIN 6’ (1.83m) 064039-048

PC XT/AT Y 5 Pin DIN 6’ (1.83m) 064039-008

PC XT/AT Y 5 Pin DIN 15’ (4.57m) 064039-037

PC XT/AT Single end 5 Pin DIN 6’ (1.83m) 064039-035

PC XT/AT Single end 5 Pin DIN 12’ (3.65m) 064039-036

PS2 30/50/60/80 Y 6 Pin Mini-DIN 6’ (1.83m) 064039-006

PS2 30/50/60/80 Y 6 Pin Mini-DIN 15’ (4.57m) 064039-038

RS-232 DTE** 9 Socket D-Sub 15’ (4.57m) 064039-051

Siemens 9758 Y 5 Pin DIN 6’ (1.83m) 064039-008

Telex 88 Key,

102 Key, 122 Key

Y 5 Pin DIN 6’ (1.83m) 064039-008

Wyse* Y 4 Pin Modular 6’ (1.83m) 064039-052

Zenith CruisePAD 6 Pin Mini-DIN 6’ (1.83m) 064039-032

Requires one of these external power supplies:

100V, 50/60 Hz Part No. 043230

120V, 60 Hz (North American plug) Part No. 047793

240V, 50 Hz (United Kingdom plug) Part No. 047794

230V, 50 Hz (Euro plug) Part No. 047795

PS/2 Mouse Cable, Power Pick-Up Part No. 590451

**Power on pin 9; no power supply required.

Connecting the 1551B Laser Scanner

You can connect the 1551B scanner to these Intermec products:

• 944X Portable Terminals

• 95XX Network Terminals

• TRAKKER Antares 242X Terminals

• 97XX Wedge Readers

• JANUS™ 2010 Terminals (J2010 and JG2010)

To connect the scanner

1. Turn off the

reader/terminal.

2. Connect the modular

plug on the interface

cable into the bottom of

the scanner handle.

3. Tighten the screw using

a medium-sized,

straight-slot screwdriver

to secure the plug in the

scanner handle.

4. Connect the other end of

the cable to the

reader/terminal.

If you are using a power

supply, connect the

power supply to a

power outlet and the

reader/terminal plug.

Note:

The cable connector plug for the reader/terminal will vary

according to the cable ordered.

For more help installing, configuring, and programming your

scanner, refer to the

1551B Decoding Laser Scanner User’s Manual

(Part No. 066104) or find the manual on the internet at

www.intermec.com/manuals/1551b/1551.htm.

Scanner

handle

Modular

plug

Interface

cable

Screw

155XQG.002

Code 39

Operating the 1551B Laser Scanner

You can use the scanner for hand-held or hands-free scanning.

Hand-Held Scanning

Before you start scanning, make sure the power to the

reader/terminal is on and all cable connections are secure.

To scan bar codes

1. Aim the scanner at a slight angle or pitch to the bar code and

press the trigger. To help you center the laser beam on the

correct bar code, the scanners with long-range or

high-visibility optics have a marker beam that will appear

before scanning when you pull the trigger.

*123*

Vertical

Reading

Angles (Pitch)

155XQG.003

2. Adjust the scanner distance to the bar code and the position

of the laser beam to make sure every bar and space is

scanned.

*HI* *HI*

INCORRECT CORRECT

155XQRG.006

3. When you get a successful read the laser beam turns off, the

scanner beeps once, and the light turns green.

Hands-Free Scanning

You can use your 1551B laser scanner with a scanner stand for

hands-free scanning. To order a scanner stand, see “Accessories

for the Scanner” later in this guide.

Note:

If your scanner stand does not have a small magnet in the

holder, you need to upgrade your stand using upgrade kit part number

066799.

To use the scanner stand

1. Place the scanner

handle on the

bottom ledge of the

holder and then

rotate the handle in

the holder until it

locks into place.

2. Align the scanner

and adjust the

column height so

that the pulsating

laser beam covers

the entire label on

the base of the stand.

155XQG.005

Holder

Code 39

3. Make sure the scanner is on

and the cable is secure and

then place a bar code right-

side up over the label on the

base of the stand.

When you get a successful

read the laser beam turns

off, the scanner beeps once,

and the light turns green.

If you remove the scanner from the stand, it will immediately

reset to hand-held scanning. You can scan bar codes by pressing

the trigger.

Configuring the Marker Beam

This section explains how to configure the marker beam on

long-range and high-visibility scanners. Scan one of the

following bar codes to turn off the marker beam, set it to appear

for 500 milliseconds, or set it to appear for 1.25 seconds. The

default setting is 500 milliseconds.

Off

500 milliseconds

1.25 seconds

155XQG.004

*HI*

Configuring for Selected Terminals

The next instructions are for configuring the scanner to work

with selected popular terminals or computers.

If you have a DEC VT510/520, you can plug and play by

scanning one of these bar codes:

DEC VT 510/520 with

PC/AT style keyboard

DEC VT510/520 with

LK 411 keyboard

To configure a scanner to use with selected terminals

1. Scan this bar code.

Program Terminal Interface

2. Locate your terminal or computer from this list and scan the

two ID number bar codes representing your terminal.

Terminal/Computer First ID Number Second ID Number

Apple Mac ADB

4 9

DEC VT220/

320/420

(1551B02XX only)

0 4

IBM PC/AT,

IBM PS/2 Model

50/60/80

0 3

IBM PC/XT

0 1

IBM PS2

Model 25/303/57

0 2

Code 39

Terminal ID Numbers (continued)

Terminal/Computer First ID Number Second ID Number

IBM ThinkPad

9 7

RS-232 terminals

0 0

Note:

Additional terminal ID numbers are available in the

1551B

Decoding Laser Scanner User’s Manual

(Part No. 066104). You

can also find the manual on the internet at

www.intermec.com/manuals/1551b/1551.htm.

To configure a scanner for a laptop or pen-based terminal

1. Scan this bar code

Emulate External Keyboard

2. (Optional) If your laptop has an

integrated keyboard, scan this

bar code to keep the keyboard

from becoming permanently

disabled.

Automatic Direct Connect

Troubleshooting the 1551B Laser Scanner

This table lists common scanner problems and their solutions.

Symptom Solution

System is

“jammed” and

scanner will not

operate.

The scanner could not process the

information. Turn off the power to the

terminal and then turn it on. The scanner

will retain its configuration.

Scanner cannot

read certain bar

codes.

The scanner was not set up to read this type of

bar code, or the bar code is damaged, covered

up, or poor quality.

Scan another bar code on a similar item. If it

scans, clean the bar code giving you trouble.

If you are still unable to scan, make sure the

bar code you are scanning is enabled (see the

1551B Decodin

Laser Scanner User’s Manual,

Part No. 066104, to enable bar codes).

Scanner does not

read bar codes

quickly and

sometimes requires

multiple scans.

Clean the window with a cotton cloth

moistened with an ammonia or water

solution. Dry with a soft cotton cloth or allow

to air dry.

Make sure the bar code is free of dirt and

grime. Then scan at a slight angle or pitch to

the bar code (see “Operating the 1551B Laser

Scanner” earlier in this guide).

Try adjusting the scanning distance.

Disable all bar code symbologies except for

the bar code being scanned.

Scanner does not

read the correct

uppercase or

lowercase letter, or

number and

symbol.

If you use the Caps Lock on your terminal,

you must enable the Caps Lock command for

the scanner to read and correctly decode bar

code labels with uppercase letters.

If you use the Shift key on your terminal, you

must enable the Shift Lock command for the

scanner to read and correctly decode bar

code labels with symbols (for example: !#$%)

Code 39

Troubleshooting (continued)

Symptom Solution

Scanner does not

read “shiny” bar

codes.

Scan at a slight angle or pitch to the bar code

(see “Operating the 1551B Laser Scanner”

earlier in this guide).

Scanner emits three

beeps.

The scanner does not recognize the

programming code scanned. Make sure you

are scanning the correct programming bar

code and try again.

Scanner does not

emit a beam and

does not operate.

The scanner is not receiving power. Make

sure you are using the correct cable and that

it is plugged in and the terminal is on.

Replace damaged cables.

Make sure the scanner has been correctly

configured for your reader/terminal.

If you continue to encounter problems with your scanner,

contact your local Intermec representative.

Maintaining the 1551B Laser Scanner

Water or grime on the window of the scanner will distort the

laser beam and impair performance. Moving from one

temperature extreme to another causes condensation to form on

the optical surfaces and also affects scanner performance.

• Clean the window with a cotton cloth moistened with an

ammonia or water solution. Dry with a soft cotton cloth or

allow to air dry.

• Do

not

use a dry tissue to wipe the window. This causes

small scratches on the window that will gradually effect

performance.

• Do

not

immerse the unit in water.

• Operate and store in an environment with 0% to 95% relative

humidity.

• Operate in temperatures within -22° to 122° F (-30° to 50° C)

and store in temperatures within -40° to 158° F (-40° to 70° C).

Accessories for the Scanner

These accessories are available for your 1551B scanner. To order

an accessory or the

1551B Decoding Laser Scanner User’s Manual

(Part No. 066104), call your local Intermec representative.

olster and Belt

art No. 063793

ou can store your scanner on you when it is not

n use. The holster can be used with the belt

rovided or with any regular belt.

all-Mount Scanner Holder

art No. 063909

he wall-mount is a convenient way to store

our scanner when it is not in use.

ehicle-Mount Scanner Holder

art No. 063910

ou can attach the vehicle-mount

o a post or surface of a vehicle with tie-wraps

nd double-stick tape.

esk-Mount Scanner Holder

art No. 063812

he desk-mount is a convenient way to store

our scanner on your desk.

Scanner Stand

art No. 063799

f you have an auto-trigger scanner, you can use

he scanner stand for hands-free scanning.

ote:

our scanner stand does not have a small

net in the holder,

ou need to u

rade

our

tand usin

rade kit

art number 066799.

Code 39

Regulatory Statements for Users in Canada

and the United States

These regulatory statements apply to the 1551 laser scanner.

Industry Canada Compliance

This Class B digital apparatus meets all requirements of the

Canadian interference-causing equipment regulations.

Cet appareil numérique de la Classe B respecte routes les

exigences du règlement sur le matérial du Canada.

Federal Communications Commission Compliance

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that can cause

undesired operation.

This equipment is intended for operation in a commercial

environment, in compliance with the requirements for a Class A

digital device, pursuant to Part 15 of the FCC Rules, and it must

not be used in a residential environment; however, it has also

been tested and found to comply with the more stringent

requirements for a Class B device, pursuant to Part 15 of the

FCC Rules. It generates, uses, and can radiate radio frequency

energy. If not installed and used in accordance with the

instruction manual, it may cause interference to radio

communications. If this equipment causes interference, the user

will be required to correct the interference at the user’s own

expense.

Note:

In order to maintain compliance with FCC Rules, the I/O cables

that interconnect between the device and any peripheral (such as a

reader, etc.) must be as specified by Intermec.

La page charge ...

Intermec Sabre 1551B Quick Reference Manual

Marque: Intermec

Modèle: Sabre 1551B

Catégorie: Lecteurs de codes à barres

Taper: Quick Reference Manual

Télécharger le PDF

rapport

dans d''autres langues

English: Intermec Sabre 1551B

Intermec Sabre 1551B Quick Reference Manual

Intermec Sabre 1551B Quick Reference Manual

dans d''autres langues

Documents connexes

Autres documents