Winmate M800BW Manuel utilisateur

Please read this instructions carefully before using this product, and save this manual for future use.

8” Rugged Tablet Computer

Intel ® Celeron ® N3160 Braswell 1.6 GHz,

up to 2.24 GHz

M800BW

M800BW-M12

User Guide

Version 1.1

- 1 -

Contents

PREFACE ............................................................................................................................................................................... - 3 -

ABOUT THIS USER GUIDE ..................................................................................................................................................... - 6 -

DOCUMENTATION SET ................................................................................................................................................................... - 6 -

CHAPTER DESCRIPTIONS ................................................................................................................................................................. - 6 -

CHAPTER 1: READ ME FIRST ................................................................................................................................................. - 7 -

1.1 SAFETY INFORMATION ............................................................................................................................................................. - 7 -

1.2 HANDLING AND MAINTENANCE ............................................................................................................................................... - 10 -

CHAPTER 2: GETTING STARTED .......................................................................................................................................... - 12 -

2.1 INTRODUCTION ..................................................................................................................................................................... - 12 -

2.2 PRODUCT FEATURES .............................................................................................................................................................. - 12 -

2.3 UNPACKING ......................................................................................................................................................................... - 13 -

2.4 DESCRIPTION OF PARTS .......................................................................................................................................................... - 14 -

2.5 HOTKEY FOR SPECIFIC FUNCTIONS............................................................................................................................................ - 16 -

2.6 FIRST-TIME OPERATION ......................................................................................................................................................... - 17 -

2.6.1 Inserting Battery Pack .............................................................................................................................................. - 17 -

2.6.2 Connecting to Power Supply .................................................................................................................................... - 18 -

2.7 POWERING ON AND OFF ........................................................................................................................................................ - 19 -

2.7.1 Powering On ............................................................................................................................................................. - 19 -

2.7.2 Powering Off ............................................................................................................................................................ - 19 -

CHAPTER 3: FIRST TIME OPERATION .................................................................................................................................. - 20 -

3.1 SETTING UP WINDOWS EMBEDDED 8.1 INDUSTRY PRO ................................................................................................................ - 20 -

3.2 SETTING UP WINDOWS 10 IOT ENTERPRISE ............................................................................................................................... - 25 -

CHAPTER 4: QUICK ACCESS WITH HOTTAB ......................................................................................................................... - 27 -

4.1 HOTTAB INTRODUCTION ......................................................................................................................................................... - 27 -

4.2 SHORTCUTS ......................................................................................................................................................................... - 28 -

4.3 CAMERA ............................................................................................................................................................................. - 29 -

4.4 DEVICE ON/OFF .................................................................................................................................................................. - 31 -

4.5 USING THE WIRELESS LAN (WI-FI) .......................................................................................................................................... - 32 -

4.6 USING THE WIRELESS WAN (3G/LTE) ..................................................................................................................................... - 33 -

4.6.1 Insert SIM card (For optional 3G/LTE equipped device) ........................................................................................... - 33 -

4.6.2 Use Wireless WAN Feature ...................................................................................................................................... - 35 -

4.7 USING THE GPS.................................................................................................................................................................... - 35 -

4.8 USING THE BLUETOOTH.......................................................................................................................................................... - 36 -

4.9 USING THE BARCODE READER ................................................................................................................................................. - 37 -

4.9.1 Setting the 1D/2D Barcode Scanner Symbologies .................................................................................................... - 41 -

4.9.2 Using the MotoSetting Application to Set the Symbologies..................................................................................... - 42 -

4.10 USING FINGERPRINT READER ................................................................................................................................................ - 48 -

4.11 USING THE HF RFID READER ................................................................................................................................................ - 51 -

4.12 SWITCHING TOUCH MODES .................................................................................................................................................. - 57 -

4.12.1 Switch via Built-in HotTab Utility ........................................................................................................................... - 58 -

4.12.2 Switch via Programmable Function Buttons .......................................................................................................... - 59 -

4.13 SETTINGS .......................................................................................................................................................................... - 60 -

4.13.1 PC Information ....................................................................................................................................................... - 60 -

4.12.2 Battery Information ............................................................................................................................................... - 60 -

4.13.3 Using the Physical Function Keys (Hotkeys) ........................................................................................................... - 60 -

CHAPTER 5: FREQUENTLY USED SETTINGS ......................................................................................................................... - 62 -

- 2 -

5.1 SCREEN RESOLUTION SCALING AND SETTING .............................................................................................................................. - 62 -

5.1.1 Changing Display Scaling Setting (Recommended) .................................................................................................. - 62 -

5.1.2 USING RECOVERY WIZARD TO RESTORE COMPUTER ................................................................................................................. - 64 -

CHAPTER 6: TROUBLESHOOTING........................................................................................................................................ - 65 -

6.1 BASIC TROUBLESHOOTING ...................................................................................................................................................... - 65 -

APPENDIX A: PRODUCT SPECIFICATIONS............................................................................................................................ - 67 -

APPENDIX B: DIMENSIONS AND SCHEMATICS.................................................................................................................... - 69 -

APPENDIX C: ORDERING INFORMATION ............................................................................................................................ - 70 -

APPENDIX D: OPTIONAL ACCESSORIES ............................................................................................................................... - 71 -

APPENDIX E: SOFTWARE DEVELOPMENT KIT (SDK) ............................................................................................................ - 74 -

M800BW User Guide Preface

- 3 -

Preface

Copyright Notice

No part of this document may be reproduced, copied, translated, or transmitted in any form or

by any means, electronic or mechanical, for any purpose, without the prior written permission

of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits

and/or software described or contained in this manual in order to improve design and/or

performance. We assume no responsibility or liability for the use of the described product(s)

conveys no license or title under any patent, copyright, or masks work rights to these

products, and make no representations or warranties that these products are free from patent,

copyright, or mask work right infringement, unless otherwise specified. Applications that are

described in this manual are for illustration purposes only. We make no representation or

guarantee that such application will be suitable for the specified use without further testing or

modification.

Warranty

Our warranty guarantees that each of its products will be free from material and workmanship

defects for a period of one year from the invoice date. If the customer discovers a defect, we

will, at his/her option, repair or replace the defective product at no charge to the customer,

provide it is returned during the warranty period of one year, with transportation charges

prepaid. The returned product must be properly packaged in its original packaging to obtain

warranty service. If the serial number and the product shipping data differ by over 30 days,

the in-warranty service will be made according to the shipping date. In the serial numbers the

third and fourth two digits give the year of manufacture, and the fifth digit means the month (e.

g., with A for October, B for November and C for December).

For example, the serial number 1W16Axxxxxxxx means October of year 2016.

M800BW User Guide Preface

- 4 -

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website of

our distributor to find the update information about the product. Second, contact with your

distributor, sales representative, or our customer service center for technical support if you

need additional assistance.

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

 Description of complete problem

 The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We are

always ready to give advice on application requirements or specific information on the

installation and operation of any of our products.

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or to

alert you to the potential for hardware damage or personal injury. These are Notes, Important,

Cautions, and Warnings. The following is an example of each type of advisory.

NOTE

A note is used to emphasize helpful information.

IMPORTANT

An important note indicates information that is important for you to know.

CAUTION

A Caution alert indicates potential damage to hardware and explains how to

avoid the potential problem.

WARNING!

An Electrical Shock Warning indicates the potential harm from electrical

hazards and how to avoid the potential problem.

M800BW User Guide Preface

- 5 -

Important Information

Countries/

Area

Symbol

This equipment complies with essential

requirements of:

European Union

Electromagnetic Compatibility Directive(2014/30/EU)

Low Voltage Directive (2014/35/EU)

Restrictions of the use of certain hazardous substances

(RoHS) Directive (2011/65/EU)

USA

FCC Part 15 Subpart B Regulations Class B

Federal Communications Commission Radio Frequency Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B" digital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be required to correct the

interference at him own expense.

M800BW User Guide About This User Guide

- 6 -

About This User Guide

This User Guide provides information about using the Winmate® M800BW and accessories.

NOTE

Some pictures in this guide are samples and can differ from actual product.

Documentation Set

The documentation set for the M800BW series provides information for specific user needs,

and includes:

 M800BW Series Quick Start Guide - describes how to get the M800BW up and

running.

 M800BW Series User Guide – contains detailed description on how to use the

M800BW, its components and features.

Chapter Descriptions

Chapter 1, Read Me First provides important safety information for you to know prior using

M800BW

Chapter 2, Getting Started provides basic instructions on how to use M800BW, including main

SIM card, SD card and battery installation, powering on and resetting M800BW.

Chapter 3, First Time Operation provides instructions on how to set up Windows OS for the

first time.

Chapter 4, Quick Access by HotTab provides basic instructions on using the M800BW.

Chapter 5, Frequently Used Settings explains how to change M800BW display resolution,

replace hot-swap battery and restore the computer.

Chapter 6, Troubleshooting provides basic troubleshooting information on M800BW.

M800BW User Guide Chapter 1 Read Me First

- 7 -

Chapter 1: Read Me

First

1.1 Safety Information

Follow and adhere to all warnings and

instructions in this manual. For your safety,

please read all safety and operating

instructions before using the product. Keep

this manual for future reference.

Precaution on

Battery Pack

Précaution avec le

bloc-pile

Do Not Expose the Battery Pack to

Excessive Heat, or Extreme Heat (Near

Fire, in Direct Sunlight for example).

Generation of heat, ignition or rupture

may result

Ne pas exposer le bloc-pile à une

Chaleur Excessive, ou une Chaleur

Extrême (Près d'un feu, sous la lumière

du soleil par exemple) Une production de

chaleur, l'amorçage ou la rupture peuvent

être occasionnés

Do Not Disassemble, Modify, or Insert

Sharp Objects Into the Battery Pack.

Electrolyte leakage, generation of heat,

ignition or rupture may result.

Ne pas démonter, modifier, ou insérer

des objets pointus à l'intérieur du bloc-

pile. Une fuite d'électrolyte, la génération

de chaleur, l'amorçage ou la rupture

peuvent être occasionnés.

Do Not Short the Positive (+) and

Negative (-) Terminals of the Battery.

Generation of heat, ignition or rupture

may result. When carrying or storing the

device, do not place the battery pack

together with articles that may contact

electricity.

Ne pas court-circuiter les bornes Positive

(+) et Négative (-) de la pile, la génération

de chaleur, l'amorçage ou la rupture

peuvent être occasionnés. Lors du

transport et du rangement de l'appareil,

ne pas placer le bloc-pile en même temps

que des articles pouvant créer un contact

électrique.

Do Not Apply Shocks to the Battery by

Dropping It or Applying Strong Pressure

to It. Electrolyte leakage, generation of

heat, ignition or rupture of battery may

occur.

Ne pas faire subir de choc à la pile en la

laissant tomber ou en appliquant une

forte pression dessus. Une fuite

d'électrolyte, la génération de chaleur,

l'amorçage ou la rupture peuvent être

occasionnés.

Do Not Charge the Battery Other Than

Methods Those Specified In This Manual.

If the battery is not charged using one of

the specified methods, electrolyte

leakage, generation of heat, ignition or

rupture may result.

Ne pas charger la pile par d'autres

méthodes que celles spécifiées dans ce

manuel. Si la pile n'est pas chargée en

utilisant l'une des méthodes spécifiées,

une fuite d'électrolyte, la génération de

chaleur, l'amorçage ou la rupture peuvent

être occasionnés.

M800BW User Guide About This User Guide

- 8 -

When the Battery Pack Has Deteriorated,

Replace It with a New Battery. Continued

use of a damaged battery pack may

result in heat generation, ignition or

battery rupture.

Lorsque la pile est détériorée, la

remplacer par une nouvelle pile.

L'utilisation continue d'une pile

endommagée peut occasionner une

génération de chaleur, l'amorçage ou la

rupture de la pile.

Do Not Use the Battery Pack With Any

Other Products. The battery pack is

rechargeable and is only designed for this

specific product. If it is used with a

product other than the specified product,

electrolyte leakage, generation of heat,

ignition or rupture may result.

Ne pas utiliser avec un autre produit La

batterie est rechargeable et a été

conçue pour un produit spécifique. Si

elle est utilisée sur un produit différent

de celui pour lequel elle a été conçue,

des pertes d’électrolytes et une

production

de chaleur sont possibles, elle

risque également de prendre feu ou de

casser.

Do Not Use This Product With Battery

Other Than the One Specified.

Ne pas utiliser ce produit avec une

batterie autre que celle spécifiée

General Product

Safety

Sécurité générale

des produits

This product should not be used near

water such as bathtubs, sinks,

swimming pools, wet basement, etc.

Ce produit ne dois pas être utilisé près

de l'eau comme les baignoires, les

éviers, les piscines, les sous-sols

humides, etc.

Do not block any ventilation openings.

Do not place the product against a wall

or in an enclosed space as doing so

might impede the flow of cooling air.

Ne pas bloquer les ouvertures de

ventilation. Ne pas placer le produit

contre un mur ou dans un espace clos

de façon à entraver la circulation de l'air

de refroidissement.

Do not place the product near any heat

sources such as radiators, warm air

intakes, stoves or other heat-generating

devices (including amplifiers or other

heat producing equipment).

Ne pas placer le produit près d'une

source de chaleur comme des

radiateurs, les arrivées d'air chaud,

poêles ou autres produits générant de

la chaleur (y compris les amplificateurs

ou autre équipement produisant de la

chaleur.)

M800BW User Guide Chapter 1 Read Me First

- 9 -

Do not disregard the safety that a

polarized or grounded connection can

provide. A polarized connection consists

of two plugs, one of which is larger than

the other. A grounded connection has

two blades and a third one that is

grounded. If the main plug provided

cannot be inserted into your outlet,

consult an electrician to replace your

obsolete outlet.

Ne pas ignorer la sécurité qu'une prise

polarisée ou une prise de terre peut

prévoir. Une prise polarisée se

compose de deux fiches, dont l'une est

plus large que l'autre. Une prise de terre

possède deux lames et une troisième

qui est la terre. Si la fiche principale

fournie ne peut être insérée dans votre

prise, consultez un électricien pour

remplacer votre prise obsolète.

Protect the power cord from being

crushed or pinched, particularly in the

area of the plugs, any receptacles used,

and the point of exit from the apparatus.

Do not break off the ground pin of the

power cord.

Empêcher le cordon d'alimentation

d'être écrasé ou pincé, en particulier

dans les zones de prises, des

containers utilisés, et du point de sortie

de l'appareil. Ne pas casser la broche

de terre du cordon d'alimentation.

Use only accessories specified by the

manufacturer.

Utiliser uniquement les accessoires

spécifiés par le fabricant.

Use only with its transport carriage,

stand, tripod, console or table specified

by the manufacturer or sold with the

product. When using a carriage, move

the carriage assembly with the product

carefully to avoid damage from falling

over.

Utiliser uniquement avec son chariot de

transport, support, trépied, console ou

table spécifiés par le fabricant ou vendu

avec le produit. Lors de l'utilisation d'un

charriot, déplacez l'ensemble chariot

avec le produit avec soin pour éviter

tout dommage de chute.

Unplug this apparatus during lightning

storms or when it is not being used for

long periods.

Débrancher cet appareil durant les

orages ou lorsqu'il n'est pas utilisé

pendant de longues périodes.

Refer all servicing to qualified service

personnel. A technical intervention is

required when the apparatus has been

damaged in any way, for example if the

power cord or plug is damaged, liquid

has been spilled or objects have fallen

inside the unit, if the product has been

exposed to rain or moisture, if it does

not operate normally or if it has been

dropped.

Confier toute réparation à du personnel

qualifié. Une intervention technique est

nécessaire lorsque l'appareil a été

endommagé de quelque façon, par

exemple si le cordon d'alimentation ou

la fiche est endommagé, du liquide a

été renversé ou des objets sont tombés

à l'intérieur de l'unité, si le produit a été

exposé à la pluie ou à l'humidité, s'il ne

fonctionne pas normalement ou s'il a

été jeté.

M800BW User Guide About This User Guide

- 10 -

1.2 Handling and

Maintenance

Follow and adhere to all warnings and

instructions in this manual. For the longevity

of the product usage, please read all

operating instructions before using the

product. Keep this manual for future

reference.

General Guideline

Guide Général

Keep the product at least 13 cm (5

inches) away from electrical appliances

that can generate a strong magnetic field

such as TV, refrigerator, motor, or a large

audio speaker.

Garder le produit au moins à 13 cm (5

pouces) de distance des appareils

électriques qui peuvent générer un fort

champ magnétique comme une

télévision, un réfrigérateur, un moteur, ou

un important haut-parleur.

Do not place heavy objects on top of the

tablet computer as this may damage the

display.

Ne pas placer d'objets lourds sur le

dessus de l'ordinateur tablette cela peut

endommager l'écran.

The screen surface can be easily

scratched. Use with care. Do not use

paper towels to clean the display but use

the included cleaning cloth. Avoid

touching it with a pen or pencil.

La surface de l'écran peut être facilement

rayée. Utiliser avec précaution. Ne pas

utiliser de serviette en papier pour

nettoyer l'écran mais utiliser le chiffon de

nettoyage inclus. Éviter de toucher avec

un stylo ou un crayon.

To maximize the life of the backlight in

the display, allow backlight to

automatically turn off as a result of power

management. Avoid using a screen saver

or other software that prevents the power

management from working.

Pour maximiser la durée de vie du

rétroéclairage de l'écran, autoriser le

rétroéclairage résultant de la gestion de

l'alimentation. Éviter d'utiliser un

économiseur d'écran ou un autre logiciel

empêchant la gestion de l'alimentation de

fonctionner.

Cleaning Guideline

Guide de

nettoyage

Use a soft cloth moistened with water or a

non-alkaline detergent to wipe the

exterior of the product.

Utiliser un chiffon doux humidifié avec de

l’eau ou un détergeant non alcalin pour

essuyer l'extérieur du produit.

Gently wipe the display with a soft, lint-

free cloth. Do not use alcohol or

detergent on the product.

Essuyer délicatement l'écran avec un

chiffon doux non pelucheux. Ne pas

utiliser d'alcool ou un détergent sur le

produit.

M800BW User Guide Chapter 1 Read Me First

- 11 -

Touchscreen

Guideline

Guide de l'écran

tactile

Use your finger or the stylus on the display.

Using sharp or metallic object may cause

scratches and damage the display, thereby

causing errors.

Utiliser votre doigt ou le stylet sur l'écran.

L'utilisation d'un objet pointu ou métallique

peut provoquer des rayures.

Use a soft cloth to remove dirt on the

display. The touchscreen surface has a

special protective coating that prevents dirt

from sticking to it. Not using a soft cloth

may cause damage to the special

protective coating on the touchscreen

surface. To clean off hard to remove dirt,

blow some steam on the particular area

and gently wipe away using a soft cloth.

Utiliser un chiffon doux pour enlever la

poussière sur l'écran. La surface de l'écran

tactile a un revêtement protecteur spécial

empêchant la saleté de se coller à lui. Ne

pas utiliser un chiffon doux peut

endommager le revêtement spécial sur la

surface de l'écran tactile. Pour nettoyer les

saletés plus difficiles à enlever, souffler de

la buée sur la zone particulière et essuyer

doucement avec un chiffon doux.

Do not use excessive force on the display.

Avoid placing objects on top of the display

as this may cause the glass to break.

Ne pas utiliser une force excessive sur

l'écran. Éviter de placer des objets au

dessus de l’écran cela pourrait provoquer

une cassure du verre.

When there is a noticeable discrepancy in

the operation of the touchscreen function

(your touch does not correlate to the

proper location on the screen), recalibrate

the touchscreen display.

Lorsqu'il y a un écart sensible dans le

fonctionnement de l'écran tactile (votre

contact ne correspond pas à la bonne

position sur l'écran), recalibrer l'écran

tactile.

M800BW User Guide Chapter 2 Getting Started

- 12 -

Chapter 2: Getting Started

This chapter tells you information about Winmate® M800BW Series Rugged Tablet Computer,

its highlighted features, and provides basic instructions for using the M800BW, including

powering on and resetting the M800BW.

2.1 Introduction

Thank you for purchasing Winmate® M800BW Rugged Tablet Computer. Winmate® M800BW

Rugged Tablet PC is an enterprise-class tablet computer powered by an Intel® Celeron®

N3160 Braswell 1.6 GHz processor. The M800BW brings a new level of flexibility, functionality

and rugged design to pocket-sized mobile devices, providing task workers and managers with

the power to streamline business processes, increasing productivity and improving public

safety service.

The M800BW packs WLAN, Bluetooth, GPS, and WWAN function─all into a single device.

Besides Winmate® M800BW offers the highly reliable mobility and embedded hardware for

data collection. Broad range of configuration options- Fingerprint scanner, Barcode, RFID and

Smart Card Reader, makes M800BW highly customizable and most versatile mobile solution

for mission-critical mobile professionals.

2.2 Product Features

Winmate® M800BW Rugged Tablet PC features:

 High performance

 Multi-Touch Projective Capacitive, with optical bonding (Increased brightness)

 Fanless & Robust Design

 Designed with protection cover for better protection in rugged environments

 Default with 4G RAM/ 64G SSD / GPS, WLAN, Bluetooth

 Options:

o M12 Connector

o External antenna for better signal

o LTE module

o VESA Plate

o 1D/ 2D Barcode Reader, Fingerprint Scanner, RFID Reader, Smart Card Reader

Intel ® Celeron ® N3160 Braswell 1.6 GHz,

2M Cache, up to 2.24 GHz

M800BW User Guide Chapter 2 Getting Started

- 13 -

2.3 Unpacking

If any of the following items are missing or damaged, contact us.

Standard packing list includes:

 Tablet Computer

 Standard Battery

 Power Adapter

 Power Cord and Plugs

 Driver CD

M800BW User Guide Chapter 2 Getting Started

- 14 -

2.4 Description of Parts

Front:

Left:

Right:

No

Item

Description

1

Front Camera

2 Megapixel Webcam

2

Touch Screen

Display acts as one of

the inputs for the Tablet

Computer

3

LED

Indicators:

Show the current status

of the Tablet Computer

Front LED Indicators Detail:

4

Power Button

Power on/off tablet

5

F1 Button

Programmable function

key configured by

Hottab Utility

6

F2 Button

Programmable function

key configured by

Hottab Utility

7

Optional

Fingerprint

Scanner

Scans fingerprints

8

Speaker

0.7W Speaker

9

Digital

Microphone

Digital Microphone

No

Item

Description

10, 11

USB 3.0

High speed USB port

connects to USB

devices, such as USB

flash drive, mouse,

keyboard, printer, etc.

12

Micro HDMI

Micro HDMI port

connects to HDMI-

compatible

audiovisual devices,

such as computer

monitors, digital

televisions and video

projectors.

13

Optional

Barcode

Barcode Scanner for

reading of 1D/2D

barcode.

14

Capacitive

Stylus

Acts as one of the

inputs for the Tablet

Computer.

M800BW User Guide Chapter 2 Getting Started

- 15 -

Rear:

Bottom:

M800BW

M800BW-M12

No

Item

Description

15

Battery Pack

7.6V typ. 5200mAh Li-

ion Battery (2S2P)

16

Rear Camera

8MP Autofocus

Camera. Captures

photos and videos.

17

WWAN

Module

Service window to

insert WWAN Module

18,

19

Battery Lock

Latch

Latch to lock the

battery in place once

battery is inserted. Not

spring-loaded.

No Item Description

20 Power Input

with IP65

12 or19V DC

21 Smart Card

Reader

(M800BW)

Use to read smart

cards

M12 Connector

(M800BW-M12)

Use with External

Cable or Expansion

Box CPM800

M800BW User Guide Chapter 2 Getting Started

- 16 -

2.5 HotKey for Specific Functions

For the physical buttons on the M800BW Tablet Computer, in addition to their dedicated

functions detailed in the previous section, they can also be used to emulate commonly used

keyboard key strokes. Under different scenario, a single physical button or a combination of

physical buttons provide different keyboard key strokes, which are specified below:

Under POST (before Windows boots up):

Buttons Keystroke

F1 Recovery Menu

F2 ESC

Under Windows:

Buttons Keystroke

F1 Default: Web Browser

F2 Default: Camera

LED Indicators:

Item Description

Power Indicator

Blue – Tablet is ON

No light – Tablet is OFF

Battery Status

Orange – AC adapter is plugged in and charging

Green – AC adapter is plugged in and battery is full charged

Solid Red - Low battery (<10%)

Blinking Red – Battery is being hot swapped

No light – Battery is in use and more than 10%

Disk Activity

Indicator

Green - Disk Activity

No light - Disk Idling

RF Communication

Green – Wi-Fi/BT/WWAN/GPS ON

No light – Wi-Fi/BT/WWAN/GPS are all OFF

M800BW User Guide Chapter 2 Getting Started

- 17 -

2.6 First-time Operation

To start using the M800BW for the first time:

 Install the Battery Pack

 Charge the M800BW

 Power on the M800BW

 Configure the M800BW

2.6.1 Inserting Battery Pack

To insert the standard battery pack into the Tablet Computer:

1. Disconnect AC adapter and power cord from the Tablet Computer.

2. Turn the Tablet Computer over, back facing up.

3. Insert the battery on the connector-pins side first, and then lower the battery into the

battery compartment. Continue to hold the Battery Release Slider before battery is fully

inserted.

4. Make sure the battery is completely lowered into the compartment before letting go the

Battery Release Slider. Battery will be flat against the housing once fully inserted.

Locate the Battery into the battery slot.

Insert the Battery.

Removing the Battery Pack

1. Power off the Tablet Computer (or turn on sleep mode). Disconnect any cords connected

to the computer.

2. Turn the Tablet Computer over, back facing up.

3. Locate the Battery Lock Latch and push it to the “Unlocked” position.

4. Lift the battery out using the opening on side of battery compartment.

M800BW User Guide Chapter 2 Getting Started

- 18 -

2.6.2 Connecting to Power Supply

The Tablet Computer operates either on external AC power or internal battery power. It is

recommended to use AC power when you start up the Tablet Computer for the first time.

CAUTION

Use only the AC adapter included with your Tablet Computer. Using other AC

adapters may damage the Tablet Computer and the Battery.

IMPORTANT

For users starting up the Tablet Computer for the first time with internal

battery power, please make sure the battery is full charged before using.

Perform the following to connect the Tablet computer to AC Power:

1. On the side of the Tablet computer, lift the I/O protective cover by pulling on the latch.

2. Plug the DC cord of the AC adapter into the Power Jack of the tablet computer.

3. Plug the AC power cord into the AC adapter.

4. Finally, Plug the AC power cord into the electrical outlet.

M800BW

M800BW-M12

M800BW User Guide Chapter 2 Getting Started

- 19 -

When the AC Adapter is connected, the battery pack starts charging. The battery LED indicator

on the tablet computer would show different states. Please refer to description of LED indicator

on Description of Parts.

Item

Hours

Battery Life

7 Hours

Battery Charging Time

2.5 Hours

2.7 Powering On and Off

2.7.1 Powering On

Press and hold the power button for 3 seconds until the blue LED power indicator light up.

NOTE

 Do not press the power button repeatedly.

 Do not perform the following operations until the Disk Activity Indicator off

o Connecting or disconnecting the AC adapter

o Pressing the power button

o Touching the tablet buttons, screen, or external keyboard/mouse

2.7.2 Powering Off

Perform the following procedure to power off the Tablet Computer:

1. Make sure you have closed any programs that are open on the Desktop. Start Screen

apps don’t need to be closed.

2. Under Windows 8.1 OS, open the Charms Bar by swiping your finger from the far right of

the screen towards the middle of the screen.

3. Tap on the Settings charm.

4. Tap on Power.

5. Tap on Shut Down.

6. Wait for Tablet Computer to power off.

NOTE

The computer will forcibly be powered off if the power button is pressed and

held for 6 seconds or longer.

La page charge ...

Winmate M800BW Manuel utilisateur

Ce manuel convient également à

Winmate M800BW Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents