EASTWIND 1-LIGHT FLUSH MOUNT 3
TABLE OF CONTENTS
TOOLS REQUIRED
Important Safety Instructions 3
Parts List 4
Exploded Parts 5
Before You Begin Assembly 6
Electrical Installation 7
Step-by-step Guide 8-10
Technical Data 11
Troubleshooting 12
Caring for Your Item 12
Warranty 13
WARNING! CONSULT A QUALIFIED ELECTRICIAN TO ENSURE
CORRECT CIRCUIT CONDUCTOR.
READ INSTRUCTIONS AND REVIEW ALL DIAGRAMS BEFORE
INSTALLING FIXTURE. GENERAL INSTRUCTIONS:
1. All electrical connections must be in accordance with local codes,
ordinances and the Canadian Electrical Code.
2. These xtures should be mounted on an electrical outlet box. The box must be
directly supported by the building stucture.
3. Turn o the circuit breaker or remove the appropriate fuse to disconnect
power source before installing xture.
4. Turning the light switch o to cut the power is not sucient to prevent electric
shock. When in doubt about the safety of any electrical installation or repair,
consult a qualied electrician.
CLEANING: Before cleaning your xture, turn o the switch or power source.
Wipe the xture with a soft, damp cloth.
IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY.
No. 2 Cross-head Screwdriver
Tip Shown Actual Size
NOTE: Do not over-dril.
Be aware of over-drilling.