THORNE 1-LIGHT PENDANT 3
TABLE OF CONTENTS
Important Safety Instructions 3
Parts List 4
Before You Begin Assembly 6
Electrical Installation 7
Step-by-step Guide 8
Technical Data 12
Warranty 13
Troubleshooting 14
Caring for Your Item 15
CLEANING: Before cleaning your fixture, turn off the switch or power source.
Wipe the fixture with a soft, damp cloth.
IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY.
TOOLS REQUIRED
READ INSTRUCTIONS AND REVIEW ALL DIAGRAMS BEFORE
INSTALLING FIXTURE. GENERAL INSTRUCTIONS:
1. All electrical connections must be in accordance with local codes,
ordinances and the Canadian Electrical Code.
2. These xtures should be mounted on an electrical outlet box. The box must be
directly supported by the building stucture.
3. Turn off the circuit breaker or remove the appropriate fuse to disconnect
power source before installing xture.
4. Turning the light switch off to cut the power is not sufcient to prevent electric
shock. When in doubt about the safety of any electrical installation or repair,
consult a qualied electrician.
No. 2 Cross-head Screwdriver
Tip Shown Actual Size
NOTE: Do not over-drill/
Be aware of over-drilling.
WARNING! CONSULT A QUALIFIED ELECTRICIAN TO ENSURE
CORRECT CIRCUIT CONDUCTOR.