Maytag ELECTRIC RANGE User Instructions

Marque: Maytag

Modèle: ELECTRIC RANGE

Catégorie: Cuisinières

Taper: User Instructions

Ce manuel convient également à

GAS RANGE

THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING,

please visit our website at www.maytag.ca for additional information. If you still need assistance, call us at 1-800-807-6777.

You will need your model and serial number located on the oven frame behind the top right side of the oven door.

Para obtener acceso a “Instrucciones para el usuario de la estufa eléctrica” en español, o para obtener información adicional acerca

de su producto, visite: www.maytag.ca

Deberá tener a mano el número de modelo y de serie, que están ubicados en el marco del horno, detrás del lado derecho superior

de la puerta del horno.

ELECTRIC RANGE

USER INSTRUCTIONS

Table of Contents

RANGE SAFETY.......................................................................................2

The Anti-Tip Bracket.............................................................................2

FEATURE GUIDE .....................................................................................4

COOKTOP USE........................................................................................5

Cookware..............................................................................................7

Home Canning ......................................................................................8

OVEN USE ................................................................................................8

Electronic Oven Controls......................................................................8

Sabbath Mode ......................................................................................9

Aluminum Foil........................................................................................9

Positioning Racks and Bakeware.......................................................10

Oven Vent............................................................................................10

Baking and Roasting...........................................................................10

Broiling ................................................................................................11

Convection Baking and Roasting .......................................................11

Timed Cooking ...................................................................................11

RANGE CARE.........................................................................................12

Clean Cycle .........................................................................................12

General Cleaning.................................................................................13

Oven Light...........................................................................................14

TROUBLESHOOTING............................................................................14

ACCESSORIES ......................................................................................15

WARRANTY............................................................................................16

W10667171A

RANGE SAFETY

The Anti-Tip Bracket

The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without having

the anti-tip bracket fastened down properly.

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Verify the anti-tip bracket has been properly installed and engaged per installation instructions.

Re-engage anti-tip bracket if range is moved.

Do not operate range without anti-tip bracket installed and engaged.

Failure to follow these instructions can result in death or serious burns to children and adults.

To verify the anti-tip bracket is installed and engaged:

• Slide range forward.

• Look for the anti-tip bracket securely attached to floor or wall.

• Slide range back so rear range foot is under anti-tip bracket.

• See installation instructions for details.

WARNING

Anti-Tip

Bracket

Range Foot

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock,

injury to persons, or damage when using the range, follow

basic precautions, including the following:

■ WARNING: TO REDUCE THE RISK OF TIPPING OF

THE RANGE, THE RANGE MUST BE SECURED BY

PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK

IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE

RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET

SECURELY ATTACHED TO FLOOR OR WALL, AND

SLIDE RANGE BACK SO REAR RANGE FOOT IS

UNDER ANTI-TIP BRACKET.

■ CAUTION: Do not store items of interest to children in

cabinets above a range or on the backguard of a range –

children climbing on the range to reach items could be

seriously injured.

■ Proper Installation – Be sure the range is properly installed

and grounded by a qualified technician.

■ Never Use the Range for Warming or Heating the Room.

■ Do Not Leave Children Alone – Children should not be left

alone or unattended in area where the range is in use.

They should never be allowed to sit or stand on any part of

the range.

■ Wear Proper Apparel – Loose-fitting or hanging garments

should never be worn while using the range.

■ User Servicing – Do not repair or replace any part of the

range unless specifically recommended in the manual. All

other servicing should be referred to a qualified technician.

■ Storage in or on the Range – Flammable materials should

not be stored in an oven or near surface units.

■ Do Not Use Water on Grease Fires – Smother fire or flame

or use dry chemical or foam-type extinguisher.

■ Use Only Dry Potholders – Moist or damp potholders on

hot surfaces may result in burns from steam. Do not let

potholder touch hot heating elements. Do not use a towel

or other bulky cloth.

■ DO NOT TOUCH SURFACE UNITS OR AREAS NEAR

UNITS – Surface units may be hot even though they are

dark in color. Areas near surface units may become hot

enough to cause burns. During and after use, do not touch,

or let clothing or other flammable materials contact surface

units or areas near units until they have had sufficient time

to cool. Among those areas are the cooktop and surfaces

facing the cooktop.

■ Use Proper Pan Size – The range is equipped with one or

more surface units of different size. Select utensils having

flat bottoms large enough to cover the surface unit heating

element. The use of undersized utensils will expose a

portion of the heating element to direct contact and may

result in ignition of clothing. Proper relationship of utensil to

burner will also improve efficiency.

■ Never Leave Surface Units Unattended at High Heat

Settings – Boilover causes smoking and greasy spillovers

that may ignite.

■ Make Sure Reflector Pans or Drip Bowls Are in Place –

Absence of these pans or bowls during cooking may

subject wiring or components underneath to damage.

■ Protective Liners – Do not use aluminum foil to line surface

unit drip bowls or oven bottoms, except as suggested in

the manual. Improper installation of these liners may result

in a risk of electric shock, or fire.

■ Glazed Cooking Utensils – Only certain types of glass,

glass/ceramic, ceramic, earthenware, or other glazed

utensils are suitable for range-top service without breaking

due to the sudden change in temperature.

■ Utensil Handles Should Be Turned Inward and Not Extend

Over Adjacent Surface Units – To reduce the risk of burns,

ignition of flammable materials, and spillage due to

unintentional contact with the utensil, the handle of a

utensil should be positioned so that it is turned inward, and

does not extend over adjacent surface units.

■ Do Not Soak Removable Heating Elements – Heating

elements should never be immersed in water.

■ Do Not Cook on Broken Cooktop – If cooktop should

break, cleaning solutions and spillovers may penetrate the

broken cooktop and create a risk of electric shock. Contact

a qualified technician immediately.

■ Clean Cooktop With Caution – If a wet sponge or cloth is

used to wipe spills on a hot cooking area, be careful to

avoid steam burn. Some cleaners can produce noxious

fumes if applied to a hot surface.

■ Use Care When Opening Door – Let hot air or steam

escape before removing or replacing food.

■ Do Not Heat Unopened Food Containers – Build-up of

pressure may cause container to burst and result in injury.

■ Keep Oven Vent Ducts Unobstructed.

■ Placement of Oven Racks – Always place oven racks in

desired location while oven is cool. If rack must be moved

while oven is hot, do not let potholder contact hot heating

element in oven.

■ DO NOT TOUCH HEATING ELEMENTS OR INTERIOR

SURFACES OF OVEN – Heating elements may be hot even

though they are dark in color. Interior surfaces of an oven

become hot enough to cause burns. During and after use,

do not touch, or let clothing or other flammable materials

contact heating elements or interior surfaces of oven until

they have had sufficient time to cool. Other surfaces of the

appliance may become hot enough to cause burns – among

these surfaces are oven vent openings and surfaces near

these openings, oven doors, and windows of oven doors.

For self-cleaning ranges –

■ Do Not Clean Door Gasket – The door gasket is essential

for a good seal. Care should be taken not to rub, damage,

or move the gasket.

■ Do Not Use Oven Cleaners – No commercial oven cleaner

or oven liner protective coating of any kind should be used

in or around any part of the oven.

■ Clean Only Parts Listed in Manual.

■ Before Self-Cleaning the Oven – Remove broiler pan and

other utensils.

For units with ventilating hood –

■ Clean Ventilating Hoods Frequently – Grease should not

be allowed to accumulate on hood or filter.

■ When flambeing foods under the hood, turn the fan on.

FEATURE GUIDE

This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Customer Service

Section at www.maytag.ca.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

KEYPAD FEATURE INSTRUCTIONS

CLOCK Clock The Clock uses a 12-hour cycle.

1. Check that the oven is off.

2. Press CLOCK.

3. Press TEMP/TIME “+” or “-” keypads to set the time of day.

4. Press SET CLOCK or START.

LIGHT Oven cavity light The oven light is controlled by a keypad on the oven control panel. While the oven door is closed,

press the oven light switch to turn the light on and off. The oven light will come on when the oven

door is opened.

KITCHEN

TIMER

(on/off)

Oven timer The Kitchen Timer can be set in hours or minutes up to 12 hours and 59 minutes.

1. Press KITCHEN TIMER.

2. Press TEMP/TIME “+” or “-” keypads to set the length of time.

3. Press START to begin the countdown. If enabled, end-of-cycle tones will sound at end of

countdown.

4. Press KITCHEN TIMER twice to cancel the Timer. Do not press the Cancel keypad because the

oven will turn off.

5. If the Kitchen Timer is running, but not in the display, press KITCHEN TIMER to display the

countdown for 5 seconds.

START Cooking start The Start pad begins any oven function. If Start is not pressed within 2 minutes, “PUSH” appears

in the display. If Start is not pressed within 1 minute after pressing a keypad, the function is

canceled and the time of day is displayed.

CANCEL Range function The Cancel keypad stops any function except the Clock, Kitchen Timer and Oven Control Lockout.

TEMP/TIME Temperature and

time adjust

The “+” or “-” keypads are used to adjust time and temperature settings.

BAKE Baking and

roasting

1. Press BAKE.

2. Press TEMP/TIME “+” or “-” keypads to set a temperature other than 350°F (175°C) in 5°

increments between 170°F and 500°F (75°C and 260°C).

3. Press START.

4. To change the temperature, repeat Step 2. Press START for the change to take effect.

5. Press CANCEL when finished.

BROIL Broiling 1. Press BROIL.

2. Press TEMP/TIME “+” or “-” keypads to change the temperature in 5° increments between

300°F and 500°F (150°C and 260°C).

3. Press START, and allow oven to preheat for 5 minutes.

4. Position cookware in the oven and close the oven door to the broil stop position so that the

door is open approximately 6" (15 cm).

5. Press CANCEL when finished.

CONVECT

BAKE

Convection

baking and

roasting

1. Press CONVECT BAKE.

2. Press TEMP/TIME “+” or “-” keypads to set a temperature other than 350°F (175°C) in 5°

increments between 170°F and 500°F (75°C and 260°C).

3. Press START.

4. To change the temperature, repeat Step 2. Press START for the change to take effect.

5. Press CANCEL when finished.

COOKTOP USE

The control knobs can be set to anywhere between HIGH and

LOW. Push in and turn to setting.

Ceramic Glass

The surface cooking area will glow red when an element is on.

Some parts of the surface cooking area may not glow red when an

element is on. This is normal operation. It may cycle on and off to

maintain the selected heat level.

It is normal for the surface of light colored ceramic glass to appear

to change color when surface cooking areas are hot. As the glass

cools, it will return to its original color.

Clean the cooktop after each use to help avoid scratches, pitting,

abrasions and to condition the glass surface. Ceramic glass cooktop

cleaner and a cooktop scraper are also recommended for stubborn

soils. Do not use abrasive cleaners, cleaning pads or harsh chemicals

for cleaning. The Cooktop Care Kit Part Number 31605 contains all of

the items needed to clean and condition your ceramic glass cooktop.

Refer to the “Range Care” section for additional information.

IMPORTANT: To avoid permanent damage to the cooktop surface

and to make soils easier to remove, clean the cooktop after each

use to remove all soils.

■ Avoid storing jars or cans above the cooktop. Dropping a heavy

or hard object onto the cooktop could crack the cooktop.

■ To avoid damage to the cooktop, do not leave a hot lid on the

cooktop. As the cooktop cools, air can become trapped

between the lid and the cooktop, and the ceramic glass could

break when the lid is removed.

■ For foods containing sugar in any form, clean up all spills and

soils as soon as possible. Allow the cooktop to cool down

slightly. Then, while wearing oven mitts, remove the spills using

a scraper while the surface is still warm. If sugary spills are

allowed to cool down, they can adhere to the cooktop and can

cause pitting and permanent marks.

■ To avoid scratches, do not slide cookware or bakeware across

the cooktop. Aluminum or copper bottoms and rough finishes

on cookware or bakeware could leave scratches or permanent

marks on the cooktop.

■ Do not cook popcorn in prepackaged aluminum containers on

the cooktop. They could leave aluminum marks that cannot be

removed completely.

■ To avoid damage to the cooktop, do not allow objects that

could melt, such as plastic or aluminum foil, to touch any part

of the entire cooktop.

■ To avoid damage to the cooktop, do not use the cooktop as a

cutting board.

■ Use cookware about the same size as the surface cooking

area. Cookware should not extend more than ½" (1.3 cm)

outside the area.

KEEP WARM Hold warm Food must be at serving temperature before placing it in the warmed oven.

1. Press KEEP WARM.

2. Temperature is set at 170°F (75°C) for 60 minutes (1 hour).

3. Press START.

4. Press CANCEL when finished.

NOTE: The oven will automatically turn off after 60 minutes.

DELAY START Delayed start The Delay Start keypad is used to enter the starting time for an oven function with a delayed start.

Delay start should not be used for foods such as breads and cakes because they may not bake

properly.

To set a Timed Cook or a Delayed Timed Cook, see “Timed Cooking” section.

COOK TIME Timed cooking Timed Cooking allows the oven to be set to turn on at a certain time of day, cook for a set length of

time, and/or shut off automatically.

To set a Timed Cook or a Delayed Timed Cook, see “Timed Cooking” section.

AQUALIFT

SELF CLEAN

Clean cycle See the “Clean Cycle” section.

START

(hold 3 sec

to lock)

Oven control

lockout

1. Check that the oven is off.

2. Press and hold the START (hold 3 sec to lock) keypad for 3 seconds.

3. A tone will sound, and “Loc” will be displayed.

4. Repeat to unlock. Only the Clock, Kitchen Timer and Oven Light keypads will function with the

controls locked. The cooktop functions are not affected by the oven control lockout.

KEYPAD FEATURE INSTRUCTIONS

WARNING

Fire Hazard

Turn off all controls when done cooking.

Failure to do so can result in death or fire.

REMEMBER: When range is in use or (on some models)

during the Self-Cleaning cycle, the entire cooktop area may

become hot.

A. Surface cooking area

B. Cookware/canner

C. ½" (1.3 cm) maximum overhang

■ Use flat-bottomed cookware for best heat conduction and

energy efficiency. Cookware with rounded, warped, ribbed or

dented bottoms could cause uneven heating and poor cooking

results.

■ Determine flatness by placing the straight edge of a ruler

across the bottom of the cookware. While you rotate the ruler,

no space or light should be visible between it and the

cookware.

■ Cookware designed with slightly indented bottoms or small

expansion channels can be used.

■ Make sure the bottoms of pots and pans are clean and dry

before using them. Residue and water can leave deposits when

heated.

■ To avoid damage to the cooktop, do not cook foods directly on

the cooktop.

Ceramic Glass Cooktop Cleaning

Clean the cooktop after each use to help avoid scratches, pitting,

abrasions and to condition the glass surface. Ceramic glass

cooktop cleaner and a cooktop scraper are also recommended for

stubborn soils. Do not use abrasive cleaners, cleaning pads or

harsh chemicals for cleaning. The Cooktop Care Kit Part Number

31605 contains all of the items needed to clean and condition your

ceramic glass cooktop. Refer to the “Range Care” section for

additional information.

IMPORTANT: To avoid permanent damage to the cooktop surface

and to make soils easier to remove, clean the cooktop after each

use to remove all soils.

Cooktop On Indicator Light

The Cooktop On indicator light is located on the console panel.

When any control knob on the console panel is turned on, the

Cooktop On indicator light will glow.

Hot Surface Indicator Light (on some models)

On ceramic glass models, the hot surface indicator light is located

on the console panel.

The hot surface indicator light will glow as long as any surface

cooking area is too hot to touch, even after the surface cooking

area is turned off.

Dual Choice™ Cooking Element (on some models)

The Dual Choice™ Cooking Element offers flexibility depending on

the size of the cookware. Single size can be used in the same way

as a regular element. The dual size combines both the single and

outer element and is recommended for larger size cookware.

Triple-Choice Cooking Element (on some models)

The Triple-Choice Cooking Element offers flexibility depending on

the size of the cookware. Single size can be used in the same way

as a regular element. The dual and triple sizes combine single, dual

and outer elements and are recommended for larger size

cookware, large quantities of food, and home canning.

Power™ Element Cooking Zone (on some models)

The Power™ Element Cooking Zone offers flexibility for 2 optional

heating choices. The High heat option can be used to boil liquids

faster. The Melt option can be used to prepare sauces, to brown or

saute foods and to keep food at a low temperature. Use cookware

appropriate in size for the Power™ Element Cooking Zone.

Warming Center Element

Use the Warming Center element to keep cooked foods warm.

One hour is the recommended maximum time to maintain food

quality.

Do not use it to heat cold foods.

The Warming Center element can be used alone or when any of the

other surface cooking areas are being used.

The Warming Center element area will not glow red when cycling

on. However, the Element On light will glow while the Cooktop

Warming Center element is in use.

A. Dual

B. Single

A. Single

B. Dual

C. Triple

A. Melt option

B. High heat option

WARNING

Food Poisoning Hazard

Do not let food sit for more than one hour before or

after cooking.

Doing so can result in food poisoning or sickness.

■ Use only cookware recommended for oven and cooktop use.

■ Cover all foods with a lid or aluminum foil. When warming

baked goods, allow a small opening in the cover for moisture to

escape.

■ To avoid damage to the cooktop, do not use plastic wrap to

cover food because the plastic wrap may melt.

■ Use pot holders or oven mitts to remove food.

To Use:

1. To turn on, press WARMING CENTER push button.

2. To turn off, press WARMING CENTER push button a second

time.

Cookware

IMPORTANT: Do not leave empty cookware on a hot surface

cooking area, element or surface burner.

Ideal cookware should have a flat bottom, straight sides and a well-

fitting lid, and the material should be of medium-to-heavy

thickness.

Rough finishes may scratch the cooktop. Aluminum and copper

may be used as a core or base in cookware. However, when used

as a base they can leave permanent marks on the surfaces.

Cookware material is a factor in how quickly and evenly heat is

transferred, which affects cooking results. A nonstick finish has the

same characteristics as its base material. For example, aluminum

cookware with a nonstick finish will take on the properties of

aluminum.

Cookware with nonstick surfaces should not be used under the

broiler.

Check for flatness by placing the straight edge of a ruler across the

bottom of the cookware. While you rotate the ruler, no space or

light should be visible between it and the cookware.

Use the following chart as a guide for cookware material

characteristics.

Use flat-bottomed cookware for best cooking results and energy

efficiency. The cookware should be about the same size as the

cooking area outlined on the cooktop. Cookware should not extend

more than ½" (1.3 cm) outside the area.

1 2

1 3

1 4

1 5

1 6

1 7

1 8

1 9

2 0

COOKWARE CHARACTERISTICS

Aluminum

■ Heats quickly and evenly.

■ Suitable for all types of cooking.

■ Medium or heavy thickness is best for

most cooking tasks.

■ May leave aluminum residues, which

may be diminished if cleaned

immediately after cooking.

Cast iron

■ Heats slowly and evenly.

■ Good for browning and frying.

■ Maintains heat for slow cooking.

■ Rough edges or burrs may scratch the

cooktop.

Ceramic or

Ceramic glass

■ Follow manufacturer’s instructions.

■ Heats slowly, but unevenly.

■ Ideal results on low to medium heat

settings.

■ May scratch the cooktop.

Copper

■ Heats very quickly and evenly.

■ May leave copper residues, which

may be diminished if cleaned

immediately after cooking

■ Can leave a permanent stain or bond

to the cooktop if overheated.

Earthenware ■ Follow manufacturer’s instructions.

■ Use on low heat settings.

■ May scratch the cooktop.

Porcelain

enamel-on-

steel or cast

iron

■ See stainless steel or cast iron.

■ Porcelain enamel bakeware without

the metal base may bond to the

cooktop if overheated.

Stainless steel

■ Heats quickly, but unevenly.

■ A core or base of aluminum or copper

on stainless steel provides even

heating.

Home Canning

Canning can be performed on a glass smooth top cooking surface

or traditional coil element cooktop. When canning for long periods,

alternate the use of surface cooking areas or elements between

batches. This allows time for the most recently used areas to cool.

■ Center the canner on the largest surface cooking area or

element. On electric cooktops, canners should not extend

more than ½" (1.3 cm) beyond the surface cooking area or

element.

■ Do not place canner on 2 surface cooking areas or elements at

the same time.

■ On ceramic glass models, use only flat-bottomed canners to

avoid damage to the cooktop and elements.

■ For more information, contact your local agricultural extension

office, or refer to published home canning guides. Companies

that manufacture home canning products can also offer

assistance.

OVEN USE

Odors and smoke are normal when the oven is used the first few

times, or when it is heavily soiled.

IMPORTANT: The health of some birds is extremely sensitive to the

fumes given off. Exposure to the fumes may result in death to

certain birds. Always move birds to another closed and well-

ventilated room.

Electronic Oven Controls

Control Display

The display will flash when powered up or after a power loss. Press

CANCEL to clear. When oven is not in use, the time of day is

displayed, unless the range is in Energy Save mode. During Energy

Save mode, the display will be blank. Indicator lights show

functions that are in use.

Tones

Tones are audible signals, indicating the following:

Basic Functions

One tone

■ Valid pad press

■ Oven is preheated (long tone)

■ Function has been entered

■ Reminder (on some models), repeating every 20 seconds after

the end-of-cycle tones

Three tones

■ Invalid pad press

Four tones

■ End of cycle

Energy Save

The Energy Save feature places the control and clock into a Sleep

mode that reduces power consumption when the range is not

being used.

To enter the Energy Save mode, the oven and control must be idle

with the time of day shown on the display. Press and hold CLOCK

for 10 seconds. The control will beep, and the display will show the

letters “ES” followed by “On” twice. The display will return to the

time of day.

If Energy Save mode is activated, each time the range is idle for

5 minutes with only the time of day shown, the display will show

the letters “ES” followed by “On” twice. The display will then be

blank until a control key is pressed or the oven door is opened. The

control will then perform any of its operations in response to

additional key presses.

To exit Energy Save mode, press and hold the CLOCK key for

10 seconds. The control will beep, and the display will show the

letters “ES” followed by “Off” twice. The display will return to the

time of day.

Oven Temperature Control

IMPORTANT: Do not use a thermometer to measure oven

temperature because opening the oven door may cause element

cycling to give incorrect readings.

The oven provides accurate temperatures; however, it may cook

faster or slower than your previous oven, so the temperature can

be adjusted to personalize it for your cooking needs. It can be

changed in Fahrenheit or Celsius.

To Adjust Oven Temperature:

1. Press and hold BAKE for 5 seconds until the oven display

shows the current setting, for example “0°F CAL” or “00.”

2. Press the Temp/Time “+” or “-” keypads to increase or to

decrease the temperature in 10°F (5°C or 6°C) amounts. The

adjustment can be set between 30°F (17°C) and -30°F (-17°C).

3. Press START.

Options Mode

Press and hold KITCHEN TIMER for 5 seconds, and “Opt” will

appear. Use the Temp/Time “+” or “-” keypads to cycle through the

following options. Press CANCEL to exit the mode.

Fahrenheit and Celsius

The temperature is preset at Fahrenheit, but can be changed to

Celsius. Press KITCHEN TIMER to toggle between Fahrenheit and

Celsius. Press CANCEL to exit.

End of Cycle Tones

“b1” (beep once) or “b” (continue to beep) will be displayed. Press

KITCHEN TIMER to toggle through selections. Press CANCEL to

exit.

Oven Light with Door Open

“LOn” indicates that the oven light will turn on when the door is

open. If “LOFF” is displayed, the oven light will turn on only with the

oven light switch. Press KITCHEN TIMER to toggle through

selection. Press CANCEL to exit.

12-Hour Shutoff

If “12 Hr” is displayed, the oven will automatically shut off after

12 hours. Press KITCHEN TIMER to toggle to “- Hr” to disable the

12-hour shutoff. Press CANCEL to exit.

Sabbath Mode

The Sabbath Mode sets the oven to remain on in a Bake setting

until turned off. A Timed Bake can also be set to keep the oven on

for only part of the Sabbath. The Oven Control Lockout Feature (if

present) will be disabled during the Sabbath Mode. After the

Sabbath Mode is set no tones will sound, the display will not show

the temperature, the Kitchen Timer Mode will be canceled (if active)

and only the following pads will function:

■ “+” or “-” keypads

■ Cancel

When the oven door is opened or closed, the oven light will not turn

on or off and the heating elements will not turn on or off

immediately.

When power is restored after a power failure, the oven will return to

Sabbath Mode and remain Sabbath compliant with the bake

elements off until the Cancel keypad is pressed.

Pressing the Cancel keypad at any time returns the oven to the

normal cooking mode (not Sabbath Mode compliant).

Before entering the Sabbath Mode, it must be decided if the oven

light is to be on or off for the entire Sabbath Mode period. If the

light is on when entering Sabbath Mode, it will remain on for the

entire time Sabbath Mode is in use. If the light is off when entering

Sabbath Mode, it will remain off for the entire time Sabbath Mode is

in use. Opening the oven door or pressing the Oven Light keypad

will not affect the oven light once Sabbath Mode has been entered.

If the oven has the Convection Bake feature, the oven light is

controlled by a separate Oven Light switch on the console. If the

oven light is on when entering the Sabbath Mode, it will remain on

for the entire time Sabbath Mode is in use. For the oven light to be

off during the Sabbath Mode, the light bulb must be removed from

the oven prior to entering the Sabbath Mode. Not performing these

steps will cause the oven light to turn on when the oven door is

opened, resulting in the oven being not Sabbath compliant.

On the Holiday, the oven temperature can be changed once the

oven is in Sabbath Mode by pressing the “+” or “-” keypads. The

oven temperature will change 25°F (14°C) each time the keypad is

pressed. The display will not change, and there will be no sounds

during this adjustment.

To Bake Using Sabbath Mode:

1. Press BAKE.

2. Press the “+” or “-” keypads.

3. Press START.

4. Press and hold the TIMER keypad for 5 seconds. “SAb” will

flash in the display.

5. Press START within 5 seconds to enter Sabbath Mode;

otherwise, the entire cycle cancels out. “SAb” will stop flashing

and remain on in the display. The oven is now in Sabbath Mode

and is Sabbath compliant.

Pressing the Cancel keypad at any time returns the oven to the

normal cooking mode (not Sabbath Mode compliant).

To set a Timed Bake using Sabbath Mode

(on some models):

1. Press BAKE.

2. Press the “+” or “-” keypads to enter a temperature other than

the one displayed.

3. Press COOK TIME. The Cook Time oven indicator light will light

up.

4. Press the “+” or “-” keypads to enter a cook time length.

5. Press START.

6. Press and hold the TIMER keypad for 5 seconds. “SAb” will

flash in the display.

7. Press START within 5 seconds to enter Sabbath Mode;

otherwise, the entire cycle cancels out. “SAb” will stop flashing

and remain on in the display. The oven is now in Sabbath Mode

and is Sabbath compliant. The Bake, On and Cook Time

indicator lights will be displayed.

When the set cook time ends, the oven will shut off automatically

and the indicator lights will turn off, indicating the end of the cycle.

Pressing the Cancel keypad at any time returns the oven to the

normal cooking mode (not Sabbath Mode compliant).

To set a Delayed Timed Bake using Sabbath Mode

(on some models):

1. Press BAKE.

2. Press the “+” or “-” keypads to enter a temperature other than

the one displayed.

3. Press COOK TIME. The Cook Time oven indicator light will light

up.

4. Press the “+” or “-” keypads to enter a cook time length.

5. Press START TIME or DELAY START. The Start Time/Delay

Start indicator light will light up.

6. Press the “+” or “-” keypads to enter a start time.

7. Press START.

8. Press and hold the TIMER keypad for 5 seconds. “SAb” will

flash in the display.

9. Press START within 5 seconds to enter Sabbath Mode;

otherwise, the entire cycle cancels out. “SAb” will stop flashing

and remain on in the display. The oven is now in Sabbath Mode

and is Sabbath compliant. The On and Delay indicator lights

will be displayed.

When the start time is reached the Bake, On and Cook Time

indicator lights will automatically turn on. When the set cook time

ends, the oven will shut off automatically and the indicator lights

will turn off, indicating the end of the cycle.

Pressing the Cancel keypad at any time returns the oven to the

normal cooking mode (not Sabbath Mode compliant).

Aluminum Foil

IMPORTANT: To avoid permanent damage to the oven bottom

finish, do not line the oven bottom with any type of foil or liner.

For best cooking results, do not cover entire oven rack with foil

because air must be able to move freely.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

Positioning Racks and Bakeware

IMPORTANT: To avoid permanent damage to the porcelain finish,

do not place food or bakeware directly on the oven door or bottom.

Bakeware

To cook food evenly, hot air must be able to circulate. Allow 2"

(5 cm) of space around bakeware and oven walls. Make sure that

no bakeware piece is directly over another.

Racks

■ Position racks before turning on the oven.

■ Do not move racks with bakeware on them.

■ Make sure racks are level.

To move a rack, pull it out to the stop position, raise the front edge,

and then lift out. Use the following illustration and charts as a guide.

The oven has 7 positions for a flat rack, as shown in the previous

illustration and the following table.

For hamburger patties to have a well-seared exterior and a rare

interior, use rack position 7. Side 1 should cook for approximately

2½ - 3½ minutes. Side 2 should cook for approximately

4-5 minutes. Expect a moderate degree of smoke when broiling.

*If your model has a Max Capacity Oven Rack, the recessed ends

must be placed in the rack position above the desired position of

the food. See the following illustration.

IMPORTANT: These rack positions are for flat racks. If a Max

Capacity Oven Rack is used, the rack position must be adjusted as

shown in the previous figure.

Multiple Rack Cooking

2-rack (non-convection): Use rack positions 2 and 5.

2-rack (convection): Use rack positions 2 and 5.

Baking Cookies and Layer Cakes on 2 Racks

Baking Layer Cakes

For best results when baking cakes on 2 racks, use the Bake

function and racks 2 and 5. Place the cakes on the racks as shown.

Baking Cookies

For best results when baking cookies on 2 racks, use the Bake

function and rack positions 2 and 5.

Oven Vent

A. Oven vent

The oven vent releases hot air and moisture from the oven, and

should not be blocked or covered. Blocking or covering the oven

vent will cause poor air circulation, affecting cooking and cleaning

results. Do not set plastics, paper or other items that could melt or

burn near the oven vent.

Baking and Roasting

Precision Cooking™ System - Precise Bake

The Precise Bake system electronically regulates the oven heat

levels during preheat and bake to maintain a precise temperature

range for optimal cooking results. The bake and broil elements

cycle on and off in intervals. The bake element will glow red when

cycling on; the broil element will not. This feature is automatically

activated when the oven is in use.

Before baking and roasting, position racks according to

“Positioning Racks and Bakeware” section. When roasting, it is not

necessary to wait for the oven preheat cycle to end before putting

food in unless it is recommended in the recipe.

Preheating

When Start is pressed, the oven will begin preheating. Once 100ºF

(38ºC) is reached, the display temperature will increase as the

actual temperature of the oven increases. When the preheat

temperature is reached, a tone will sound, and the selected

temperature will appear on the display.

The time to preheat the oven to 350°F (175°C) will be

approximately 10-15 minutes depending upon the model.

Flat Rack Position* Type of Food

7 Broiling/searing meats, hamburgers,

steaks

6 Broiled meats, poultry, fish

3 or 4 Most baked goods, casseroles

2 Roasted meats

1 Large roasts or poultry

A. Ends of rack in position 3

B. Food in position 2

Broiling

Leave the door open 6" (15 cm) at the broil stop position to ensure

proper broiling temperature. Preheat the oven for 5 minutes before

putting food in unless recommended otherwise in the recipe.

Position food on grid in a broiler pan, then place it in the center of

the oven rack.

NOTE: Odors and smoke are normal the first few times the oven is

used or if the oven is heavily soiled.

Changing the temperature when broiling allows more precise

control when cooking. The lower the broil setting, the slower the

cooking. Thicker cuts and unevenly shaped pieces of meat, fish

and poultry may cook better at lower broil settings. Use racks 6 or

7 for broiling. Refer to the “Positioning Racks and Bakeware”

section for more information.

On lower settings, the broil element will cycle on and off to maintain

the proper temperature.

■ For best results, use a broiler pan and grid. It is designed to

drain juices and help avoid spatter and smoke.

If you would like to purchase a broiler pan, one may be ordered.

Please refer to the “Accessories” section for more information.

Convection Baking and Roasting (on some models)

In a convection oven, the fan-circulated hot air continually

distributes heat more evenly than the natural movement of air in a

standard thermal oven. This movement of hot air helps maintain a

consistent temperature throughout the oven, cooking foods more

evenly, crisping surfaces while sealing in moisture and yielding

crustier breads.

With convection cooking, most foods can be cooked at a

temperature 25°F (15°C) lower than in a standard thermal oven,

and cooking time can be shortened by up to 30%.

During convection baking or roasting, the bake and broil elements

cycle on and off in intervals to maintain the oven temperature, while

the fan circulates the hot air.

If the oven door is opened during convection baking or roasting,

the fan will turn off immediately. It will come back on when the oven

door is closed.

Timed Cooking (on some models)

To Set a Timed Cook:

1. Press BAKE. The bake indicator light will light up.

2. Press the TEMP/TIME “+” or “-” keypads to enter a

temperature other than the one displayed.

3. Press COOK TIME. The cook time oven indicator light will light

up.

4. Press the TEMP/TIME “+” or “-” keypads to enter the length of

time to cook.

5. Press START. The display will count down the time. When the

time ends, the oven will shut off automatically and “End” will

appear on the display.

6. Press CANCEL to clear the display.

To Set a Delayed Timed Cook:

Before setting, make sure the clock is set to the correct time of day.

See the “Clock” keypad feature in the “Feature Guide” section.

1. Press BAKE.

2. Press the TEMP/TIME “+” or “-” keypads to enter a

temperature other than the one displayed.

3. Press COOK TIME. The cook time oven indicator light will light

up.

4. Press TEMP/TIME “+” or “-” keypads to enter the length of time

to cook.

5. Press DELAY START. The delay oven indicator light will light up.

6. Press TEMP/TIME “+” or “-” keypads to enter the time of day to

start.

7. Press START.

When the start time is reached, the oven will automatically turn

on. The temperature and/or time settings can be changed

anytime after pressing Start by repeating steps 1-7. When the

set cook time ends, the oven will shut off automatically and

“End” will appear on the display.

8. Press CANCEL to clear the display.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

RANGE CARE

Clean Cycle

AquaLift

Technology is an innovative cleaning solution that utilizes

heat and water to release baked-on spills from the oven in less than

1 hour. This new cleaning technology is a low-heat, odor-free

alternative to traditional self-cleaning options.

Allow the oven to cool to room temperature before using the Clean

cycle. If your oven cavity is above 200°F (93°C), “HOT” will appear

in the display, and the Clean cycle will not be activated until the

oven cavity cools down.

To Clean:

1. Remove all racks and accessories from the oven cavity and

wipe excess soil. Use a plastic scraper to remove easily-

removed soils.

2. Pour 2 cups (16 oz [500 mL]) of distilled or filtered water onto

the bottom of the empty oven and close the oven door.

IMPORTANT: Do not use chemicals or other additives with the

water. Do not open the oven door during the Clean cycle. The

water on the oven bottom is hot.

3. Press AQUALIFT SELF CLEAN and then START on the oven

control panel.

4. Allow 40 minutes for cleaning and cool down. A beep will

sound when the Clean cycle is complete.

5. Press CANCEL at the end of the cycle. CANCEL may be

pressed at any time to stop the Clean cycle.

6. Remove the residual water and loosened soils with a sponge or

cloth immediately after the Clean cycle is complete. Much of

the initial 2 cups (16 oz [500 mL]) of water will remain in the

oven after the cycle is completed. If additional soils remain,

leave a small amount of water in the oven bottom to assist with

the cleaning.

7. If any soils remain, remove them with a non-scratch scrubbing

sponge or plastic scraper. Additional Clean cycles may be run

to help remove the stubborn soils.

IMPORTANT: Do not use oven cleaners. The use of chemicals,

including commercial oven cleaners or metal scouring pads,

may cause permanent damage to the porcelain surface of the

oven interior.

NOTES:

■ The range should be level to ensure that the entire surface of

the bottom of the oven cavity is covered by water at the

beginning of the Clean cycle.

■ For best results, use distilled or filtered water. Tap water may

leave mineral deposits on the oven bottom.

■ Before removing the residual water and loosened soils at the

end of the Clean cycle, insert a cloth or paper towel between

the lower edge of the oven door and the front frame to keep

water from spilling onto the front of the range and the floor.

■ Soil baked on through several cooking cycles will be more

difficult to remove with the Clean cycle.

■ Nonabrasive scrub sponges or eraser style cleaning pads

(without cleaners) can be effective for cleaning the oven cavity

walls, oven door and oven bottom for difficult soils. For best

results, moisten the pads and sponges before use.

■ Run an additional Clean cycle for stubborn soils.

■ affresh

Kitchen Appliance Cleaner and affresh

Cooktop

Cleaner may be used to clean the oven bottom, walls and door

when the oven has finished the cycle and returned to room

temperature. If affresh

Cooktop Cleaner is used, it is

recommended to wipe out the cavity with distilled water as

well. Refer to the “Accessories” section for information on

ordering.

■ Additional AquaLift

Technology Cleaning Kits may be obtained

by ordering Part Number W10423113RP. See the

“Accessories” section for more information.

■ For assistance with AquaLift

Technology, call

1-877-258-0808, or visit our website at http://whr.pl/aqualift.

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are off and

the oven and cooktop are cool. Always follow label instructions on

cleaning products. For additional information, you can visit the

Customer Care section of our website at www.maytag.ca.

Soap, water and a soft cloth or sponge are suggested first unless

otherwise noted.

EXTERIOR PORCELAIN ENAMEL SURFACES (on some

models)

Food spills containing acids, such as vinegar and tomato, should

be cleaned as soon as the entire range is cool. These spills may

affect the finish.

Cleaning Method:

■ Glass cleaner, mild liquid cleaner or nonabrasive scrubbing

pad:

Gently clean around the model and serial number plate

because scrubbing may remove numbers.

■ affresh

Kitchen and Appliance Cleaner Part Number

W10355010 (not included):

See the “Accessories” section for more information.

STAINLESS STEEL (on some models)

NOTE: To avoid damage to stainless steel surfaces, do not use

soap-filled scouring pads, abrasive cleaners, Cooktop Cleaner,

steel-wool pads, gritty washcloths or abrasive paper towels.

Damage may occur to stainless steel surfaces, even with one-time

or limited use.

Cleaning Method:

Rub in direction of grain to avoid damaging.

■ affresh

Stainless Steel Cleaner Part Number W10355016 (not

included):

See the “Accessories” section for more information.

■ Liquid detergent or all-purpose cleaner:

Rinse with clean water and dry with soft, lint-free cloth.

METALLIC PAINT (on some models)

Do not use abrasive cleaners, cleaners with bleach, rust removers,

ammonia or sodium hydroxide (lye) because paint surface may

stain.

CERAMIC GLASS (on some models)

Cleaning Method:

Use affresh

Cooktop Cleaner Part Number W10355051 with

Cooktop Scraper Part Number WA906B to clean and remove

stains from the cooktop. Use Cooktop Protectant Part Number

31463B regularly to avoid stain buildup, pitting and scratching,

while conditioning the cooktop for easier future cleaning. These

can be ordered as accessories. See the “Accessories” section for

more information. The Cooktop Scraper uses razor blades. Store

razor blades out of the reach of children.

Do not use steel wool, abrasive powder cleansers, chlorine bleach,

rust remover or ammonia because damage may occur.

Light to moderate soil

■ Can be cleaned with damp paper towels or sponge. Light

stains should be addressed with cleaner and cleaning pad.

Sugary spills (jellies, candy, syrup)

■ Clean with cooktop scraper and cooktop cleaner. Scrape off

sugary spills while the cooktop is still warm. You may want to

wear oven mitts while cleaning the cooktop.

Heavy soil, dark streaks, specks and discoloration

■ Clean with Cooktop Cleaner or nonabrasive cleaner and

cleaning pad.

Burned-on soil

■ Clean with Cooktop Cleaner, Cleaning Pad and Cooktop

Scraper.

Metal marks from aluminum and copper

■ Clean with Cooktop Cleaner and Cleaning Pad as soon as

cooktop has cooled down. The marks will not totally disappear,

but after many cleanings they will become less noticeable.

Tiny scratches and abrasions

■ Use Cooktop Cleaner and Cleaning Pad for scratches.

Scratches and abrasions do not affect cooking performance,

and after many cleanings they will become less noticeable.

COOKTOP CONTROLS

To avoid damage to the cooktop controls, do not use steel wool,

abrasive cleansers or oven cleaner.

To avoid damage, do not soak knobs.

When replacing knobs, make sure knobs are in the OFF position.

On some models, do not remove seals under knobs.

Cleaning Method:

■ Soap and water:

Pull knobs straight away from control panel to remove.

CONTROL PANEL AND OVEN DOOR EXTERIOR

To avoid damage to the control panel, do not use abrasive

cleaners, steel-wool pads, gritty washcloths or abrasive paper

towels.

Cleaning Method:

■ Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on

panel.

■ affresh

Kitchen and Appliance Cleaner Part Number

W10355010 (not included):

See the “Accessories” section for more information.

OVEN RACKS

Cleaning Method:

■ Steel-wool pad

■ For racks that have discolored and are harder to slide, a light

coating of vegetable oil applied to the rack guides will help

them slide.

STORAGE DRAWER OR WARMING DRAWER (on some

models)

Check that storage drawer or warming drawer is cool and empty

before cleaning.

Cleaning Method:

■ Mild detergent

OVEN CAVITY

Use AquaLift

Technology regularly to clean oven spills.

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At high

temperatures, foods react with porcelain and staining, etching,

pitting or faint white spots can result.

Cleaning Method:

■ Clean cycle:

See “Clean Cycle” first.

Oven Light

The oven light is a standard 40-watt appliance bulb. Before

replacing, make sure the oven and cooktop are cool and the

control knobs are in the off position.

To Replace:

1. Unplug range or disconnect power.

2. Turn the glass bulb cover in the back of the oven

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.

4. Replace bulb, then bulb cover by turning clockwise.

5. Plug in range or reconnect power.

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference Customer Service section at www.maytag.ca

to possibly avoid the cost of a service call.

Operation

PROBLEM POSSIBLE CAUSES SOLUTIONS

Nothing will operate Power supply cord is unplugged. Plug into a grounded outlet.

ENERGY SAVE is active, and the

display is blank.

Press any key on the control to display the Time of Day. See the

“Electronic Oven Controls” section for more information.

Household fuse is blown, or a

circuit breaker is tripped.

Replace the fuse or reset the circuit breaker. If the problem

continues, call an electrician.

The control displays an F9 or F9

E0 error code.

The electrical outlet in the home may be miswired. Contact a

qualified electrician to verify the electrical supply.

Cooktop will not operate The control knob is not set

correctly.

Push in knob before turning to a setting.

On ceramic glass models, the

oven control lockout is set.

See the control lock keypad feature in the “Feature Guide”

section.

Excessive heat around

cookware on cooktop

Cookware is not the proper size. Use cookware about the same size as the surface cooking

area, element or surface burner. Cookware should not extend

more than ¹⁄₂" (1.3 cm) outside the cooking area.

Cooktop cooking results not

what expected

Control knob set to incorrect heat

level

See “Cooktop Use” section.

Range is not level. Level the range. See the Installation Instructions.

Oven will not operate Delay start is set. See “Timed Cooking” section.

Control lock is on. Press and hold START for 3 seconds to unlock.

Control is in Demo Mode. Press and hold DELAY START for 10 seconds.

Electronic oven control set

incorrectly

See “Electronic Oven Controls” section.

Oven temperature too high or

too low

Oven temperature needs

adjustment.

See “Oven Temperature Control” in the “Electronic Oven

Controls” section.

Oven indicator lights flash Power to range is turned on or

restored.

See “Control Display” in the “Electronic Oven Controls”

section. If the indicator lights keep flashing, call for service. See

cover for contact information.

Display shows messages Power failure (display shows

flashing time)

Clear the display. On some models, reset the clock, if needed.

See “Clock” keypad feature in the “Feature Guide” section.

Error code (display shows letter

followed by number)

Depending on your model, press CANCEL to clear the display.

See “Control Display” in the “Electronic Oven Controls”

section. If it reappears, call for service. See cover for contact

information.

Start needs to be pressed so a

cycle can begin (display shows

“PUSH” or “PSH”).

See the “Start” keypad feature in the “Feature Guide” section.

Clean cycle did not work on all

spills

Several cooking cycles between

Clean cycles or spills on oven

walls and doors.

Run additional Clean cycles. Use the AquaLift

Technology

Cleaning Kit. Use affresh

Kitchen and Appliance Cleaner or

affresh

Cooktop Cleaner. See the “Accessories” section for

more information.

ACCESSORIES

For accessories, you can visit our website at www.maytag.ca

Mineral deposits are left on the

oven bottom after the Clean

cycle

Tap water was used in the Clean

cycle.

Use distilled or filtered water in the Clean cycle.

To remove deposits, use a cloth soaked with vinegar. Then use

a cloth dampened with water to thoroughly remove any vinegar

residue.

Range is not level. Mineral deposits will collect on dry areas of the oven bottom

during the Clean cycle. Level the range. See the Installation

Instructions.

To remove deposits, use a cloth soaked with vinegar. Then use

a cloth dampened with water to thoroughly remove any vinegar

residue.

Oven cooking results not what

expected

Range is not level. Level the range. See the Installation Instructions.

The temperature set was

incorrect.

Double-check the recipe in a reliable cookbook.

Oven temperature needs

adjustment.

See “Oven Temperature Control” in the “Electronic Oven

Controls” section.

Oven was not preheated. See “Baking and Roasting” section.

Racks were positioned

improperly.

See “Positioning Racks and Bakeware” section.

Not enough air circulation around

bakeware.

See “Positioning Racks and Bakeware” section.

Batter distributed unevenly in pan Check that batter is level in the pan.

Darker browning of food caused

by dull or dark bakeware

Lower oven temperature 25°F (15°C) or move rack to a higher

position in the oven.

Lighter browning of food caused

by shiny or light colored

bakeware

Move rack to a lower position in the oven.

Incorrect length of cooking time

was used.

Adjust cooking time.

Oven door was not closed. Be sure that the bakeware does not keep the door from closing.

Oven door was opened during

cooking.

Oven peeking releases oven heat and can result in longer

cooking times.

Rack is too close to bake burner,

making baked items too brown

on bottom.

Move rack to higher position in the oven.

Pie crusts browning too quickly. Use aluminum foil to cover the edge of the crust and/or reduce

baking temperature.

Cooktop Care Kit

(ceramic glass models)

(includes cleaner, protectant, scraper, and

applicator pads)

Order Part Number 31605

Cooktop Protectant

(ceramic glass models)

Order Part Number 31463A

affresh

Stainless Steel Cleaning

Wipes

(stainless steel models)

Order Part Number W10355049

affresh

Cooktop Cleaner

(ceramic glass models)

Order Part Number W10355051

Cooktop Cleaning Pads

(ceramic glass models)

Order Part Number W10391473

affresh

Stainless Steel Cleaner

(stainless steel models)

Order Part Number W10355016

affresh

Kitchen and Appliance

Cleaner

Order Part Number W10355010

AquaLift

Technology Oven Cleaning

Kit

Order Part Number W10423113RP

Cooktop Scraper

(ceramic glass models)

Order Part Number WA906B

Granite Cleaner and Polish

Order Part Number W10275756

Gas Grate and Drip Pan Cleaner

Order Part Number 31617A

Gourmet Griddle

Order Part Number 4396096RB

Standard Flat Oven Rack

Order Part Number W10179196

Split Oven Rack

Order Part Number W10205524

Max Capacity Oven Rack

Order Part Number W10289145

Porcelain Broiler Pan and Grid

Order Part Number 4396923

Premium Broil Pan and Roasting Rack

Order Part Number W10123240

www.maytag.com/broilerpan

PROBLEM POSSIBLE CAUSES SOLUTIONS

1/14

MAYTAG

ELECTRIC RANGE

LIMITED WARRANTY

ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS REQUIRED

TO OBTAIN WARRANTY SERVICE.

Please have the following information available when you call the

Customer eXperience Center:

■ Name, address and telephone number

■ Model number and serial number

■ A clear, detailed description of the problem

■ Proof of purchase including dealer or retailer name and address

IF YOU NEED SERVICE:

1. Before contacting us to arrange service, please determine whether your product requires repair. Some questions

can be addressed without service. Please take a few minutes to review the Troubleshooting or Problem Solver

section of the Use and Care Guide, scan the QR code on the right to access additional resources, or visit

https://www.maytag.com/product_help.

All warranty service is provided exclusively by our authorized Maytag Service Providers. In the U.S. and

Canada, direct all requests for warranty service to:

Maytag Customer eXperience Center

In the U.S.A., call 1-800-688-9900. In Canada, call 1-800-807-6777.

If outside the 50 United States or Canada, contact your authorized Maytag dealer to determine whether another warranty applies.

https://www.maytag.com/

product_help

TEN YEAR LIMITED WARRANTY

WHAT IS COVERED WHAT IS NOT COVERED

FIRST YEAR LIMITED WARRANTY (PARTS AND LABOR)

For one year from the date of purchase, when this major appliance is

installed, operated and maintained according to instructions

attached to or furnished with the product, Maytag brand of

Whirlpool Corporation or Whirlpool Canada, LP (hereafter “Maytag”)

will pay for factory specified replacement parts and repair labor to

correct defects in materials or workmanship that existed when this

major appliance was purchased.

SECOND THROUGH TENTH YEAR LIMITED WARRANTY

(CERTAIN COMPONENT PARTS ONLY -

LABOR NOT INCLUDED)

In the second through tenth years from the date of original purchase,

when this major appliance is installed, operated and maintained

according to instructions attached to or furnished with the product,

Maytag will pay for factory specified parts for the following

components to correct non-cosmetic defects in materials or

workmanship in these parts that prevent function of this major

appliance and that existed when this major appliance was

purchased. This is a limited 10-year warranty on the below named

parts only and does not include repair labor.

■ Glass-Ceramic Cooktop (if due to thermal breakage)

■ Electric Surface Elements

■ Electric Bake/Broil Elements (Excludes Convection Element)

■ Cavity (Rust Through and Broken Welds Only)

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED

WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.

Service must be provided by a Maytag designated service company.

This limited warranty is valid only in the United States or Canada and

applies only when the major appliance is used in the country in

which it was purchased. This limited warranty is effective from the

date of original consumer purchase. Proof of original purchase date

is required to obtain service under this limited warranty.

1. Commercial, non-residential or multiple-family use, or use inconsistent

with published user, operator or installation instructions.

2. In-home Instruction on how to use your product.

3. Service to correct improper product maintenance or installation,

installation not in accordance with electrical or plumbing codes or

correction of household electrical or plumbing (i.e. house wiring, fuses or

water inlet hoses).

4. Consumable parts (i.e. light bulbs, batteries, air or water filters, etc.).

5. Conversion of your product from natural gas or L.P. gas.

6. Damage from accident, misuse, abuse, fire, floods, acts of God or use

with products not approved by Maytag.

7. Repairs to parts or systems to correct product damage or defects caused

by unauthorized service, alteration or modification of the appliance.

8. Cosmetic damage including scratches, dents, chips, and other damage

to appliance finishes unless such damage results from defects in

materials and workmanship and is reported to Maytag within 30 days.

9. Discoloration, rust or oxidation of surfaces resulting from caustic or

corrosive environments including but not limited to high salt

concentrations, high moisture or humidity or exposure to chemicals.

10. Food loss due to product failure.

11. Pick-up or delivery. This product is intended for in-home repair.

12. Travel or transportation expenses for service in remote locations where an

authorized Maytag servicer is not available.

13. Removal or reinstallation of inaccessible appliances or built-in fixtures

(i.e. trim, decorative panels, flooring, cabinetry, islands, countertops,

drywall, etc.) that interfere with servicing, removal or replacement of the

product.

14. Service or parts for appliances with original model/serial numbers

removed, altered or not easily determined.

The cost of repair or replacement under these excluded circumstances

shall be borne by the customer.

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A

PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow

limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty gives you specific

legal rights, and you also may have other rights that vary from state to state or province to province.

DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY

Maytag makes no representations about the quality, durability, or need for service or repair of this major appliance other than the representations

contained in this warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with this major appliance, you

should ask Maytag or your retailer about buying an extended warranty.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. MAYTAG

SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or limitation of

incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and

you also may have other rights that vary from state to state or province to province.

For additional product information, visit www.maytag.ca

If you do not have access to the Internet and you need assistance using your product or you would like to schedule service, you may

contact Maytag at the number below.

Have your complete model number ready. You can find your model number and serial number on the label, located on the oven frame

behind the top right side of the oven door.

For assistance or service call 1-800-807-6777.

If you need further assistance, you can write to Maytag with any questions or concerns at the address below:

Maytag Brand Home Appliances

Customer eXperience Centre

200 - 6750 Century Ave.

Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your correspondence.

Please keep this User Instructions and model number information for future reference.

Notes

MERCI d'avoir acheté ce produit de grande qualité. Si vous rencontrez un problème non abordé à la section DÉPANNAGE, veuillez

visiter notre site Web à www.maytag.ca pour obtenir des informations supplémentaires. Si vous avez toujours besoin d'aide,

composez le 1-800-807-6777.

Vous aurez besoin des numéros de modèle et de série situés sur le châssis du four, derrière la partie supérieure droite de la porte du

four.

INSTRUCTIONS D'UTILISATION

DE LA CUISINIÈRE ÉLECTRIQUE

Table des matières

SÉCURITÉ DE LA CUISINIÈRE............................................................ 20

La bride antibasculement................................................................... 20

GUIDE DES CARACTÉRISTIQUES ..................................................... 23

UTILISATION DE LA TABLE DE CUISSON ........................................ 24

Ustensiles de cuisson ........................................................................ 26

Mise en conserve à la maison............................................................ 27

UTILISATION DU FOUR ....................................................................... 28

Commandes électroniques du four ................................................... 28

Mode Sabbat...................................................................................... 28

Papier d’aluminium............................................................................. 29

Positionnement des grilles et des ustensiles de cuisson au four...... 30

Évent du four ...................................................................................... 30

Cuisson au four et rôtissage .............................................................. 31

Cuisson au gril.................................................................................... 31

Cuisson au four et rôtissage par convection..................................... 31

Cuisson minutée................................................................................. 32

ENTRETIEN DE LA CUISINIÈRE ......................................................... 32

Programme de nettoyage .................................................................. 32

Nettoyage général.............................................................................. 33

Lampe du four.................................................................................... 34

DÉPANNAGE......................................................................................... 35

ACCESSOIRES...................................................................................... 37

GARANTIE.......................................................................................... 38

SÉCURITÉ DE LA CUISINIÈRE

La bride antibasculement

Dans les conditions de service normales, la cuisinière ne bascule pas. Elle peut cependant basculer si une force ou un poids excessif est

appliqué(e) sur la porte ouverte alors que la bride antibasculement n’est pas convenablement fixée.

Risque possible de décès ou de blessure grave si vous ne

suivez pas immédiatement les instructions.

Risque possible de décès ou de blessure grave si vous

ne suivez pas les instructions.

Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de blessure et

ce qui peut se produire en cas de non-respect des instructions.

Votre sécurité et celle des autres est très importante.

Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de

toujours lire tous les messages de sécurité et de vous y conformer.

AVERTISSEMENT

DANGER

Voici le symbole d’alerte de sécurité.

Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves à vous

et à d’autres.

Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot “DANGER” ou

“AVERTISSEMENT”. Ces mots signifient :

Risque de basculement

Un enfant ou une personne adulte peut faire basculer la cuisinière, ce qui peut causer un

décès.

Vérifier que la bride antibasculement est bien installée et engagée, conformément aux

instructions d'installation.

Réengager la bride antibasculement si la cuisinière a été déplacée.

Ne pas faire fonctionner la cuisinière si la bride antibasculement n'est pas installée et engagée.

Le non-respect de ces instructions peut causer un décès ou des brûlures graves aux enfants et

aux adultes.

Pour vérifier que la bride antibasculement est bien installée et engagée :

• Faire glisser la cuisinière vers l'avant.

• Vérifier que la bride antibasculement est bien fixée au plancher ou au mur.

• Faire de nouveau glisser la cuisinière vers l'arrière de sorte que le pied de la cuisinière

se trouve sous la bride antibasculement.

• Voir les instructions d'installation pour plus de détails.

AVERTISSEMENT

Bride

antibasculement

Pied de la cuisinière

Avertissements de la proposition 65 de l'État de Californie :

AVERTISSEMENT : Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de

cancers.

AVERTISSEMENT : Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de

malformations et autres déficiences de naissance.

La page charge ...

Maytag ELECTRIC RANGE User Instructions

Marque: Maytag

Modèle: ELECTRIC RANGE

Catégorie: Cuisinières

Taper: User Instructions

Ce manuel convient également à

GAS RANGE

Télécharger le PDF

rapport

dans d''autres langues

English: Maytag ELECTRIC RANGE

Maytag ELECTRIC RANGE User Instructions

Ce manuel convient également à

Maytag ELECTRIC RANGE User Instructions

dans d''autres langues

Documents connexes

Autres documents