Electrohome ELEEAAC470 Manuel utilisateur

electrohome.com

Thank you for your purchase of this Electrohome product. Please read this

instruction manual carefully before using product to ensure proper use.

Keep this manual in a safe place for future reference.

USER MANUAL

USB Charging Alarm Clock Radio

EAAC470 / EAAC470W

V1.07

AM

AM/FM

FM

PM

DIMMER

PRESETS

SNOOZE/SLEEP

- 2 -

NEED

HELP?

DO NOT RETURN THIS

PRODUCT TO THE STORE

Please contact an

ELECTROHOME®

customer support

representative rst regarding any additional information on

product features, specications or assistance with setup.

Please contact us via one of the methods below:

For more product information visit

www.electrohome.com

Support:

www.electrohome.com/support

Online live web chat:

www.electrohome.com

- 3 -

WARNINGS

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

To reduce the risk of re or electric shock, do not expose this appliance to rain or

moisture.

CAUTION

Use of controls or adjustments or performance of procedures other than those specied

may result in hazardous radiation exposure.

CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICABLE PARTS INSIDE, REFER TO QUALIFIED USER PERSONNEL.

The lightning ash with arrowhead symbol, within an equilateral traingle, is intended

to alert the user to the presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sucient magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

WARNING

TO PREVENT ELECTRIC SHOCK; DO NOT USE THIS PLUG WITH AN EXTENSION CORD RECEPTACLE OR

OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURES. TO

PREVENT FIRE OR SHOCK HAZARD; DO NOT INSTALL THIS PRODUCT IN A CONFINED SPACE SUCH AS A

BOOK CASE OR SIMILAR UNIT.

CAUTION: RETAIN THIS MANUAL FOR FUTURE REFERENCE

1. Read these instructions.

2. Keep these instructions.

3. Read all warnings.

4. Follow all instructions.

5. Do not use this product near water.

6. WARNING: Please refer to the information on exterior bottom enclosure for electrical and safety

information before installing or operating the apparatus.

- 4 -

IMPORTANT SAFETY INFORMATION

7.

Clean only with a dry cloth

.

8. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

9. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including ampliers) that produce heat.

10. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has

two blades with one wider than the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong is provided for your safety. If the provided

plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.

11. Protect the power cord from being walked on or pinched particularily at plugs, convenience

receptacles, and the point where they exit from the apparatus.

12. Only use attachments/accessories specied by the manufacturer.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

15. Apparatus shall not be exposed to dripping or splashing, and that not objects lled with

liquids, such as vases, shall be placed on the apparatus.

16. The batteries shall not be exposed to excessive heat such as sunshine, re or the like.

17. The MAINS plug is used as the disconnect device, which shall remain readily operable.

18. The MAINS plug of apparatus should not be obstructed and should be easily accessed during

intended use.

19. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.

20. WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or

moisture.

21. There should be a minimum distance of 5 cm around the apparatus for sucient ventilation.

22. The ventilation should not be impeded by covering the ventilation openings with items such as

newspaper, table-cloths, curtains etc.

23. No naked ame sources such as lighted candles should be placed on the apparatus.

24. Please use the apparatus in moderate climates.

25. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold

with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

- 5 -

IMPORTANT SAFETY INFORMATION

26. Unwind and straighten the power cord before use.

27. Damage Requiring Service

Unplug the power cord and refer servicing to qualied service professional under the

following conditions:

A. If liquid has been spilled on or into the product.

B. If the product has been exposed to rain, water, or other liquids.

C. If the product does not operate normally by following the operating instructions, adjust only

those controls that are covered by the operating instructions. Improper adjustment of other

controls may result in damage and will often require extensive work by a qualied technician

to restore the product to its normal operation.

D. If the product has been dropped or damaged in any way.

E. When the product exhibits a distinct change in performance. This may indicate a need

for service.

28. Servicing

Do not attempt to service this product yourself as opening or removing covers may expose you to

dangerous voltages or other hazards. Refer all servicing to a qualied service professional.

29. Replacement Parts

When replacement parts are required, be sure the service technician has used replacement parts

specied by the manufacturer, or have the same characteristics as the original parts. Unauthorized

substitutions may result in re, electric shock, or other hazards.

30. Safety Check

Upon completion of any service or repairs to this product, ask the service technician to perform

safety checks to determine that the product is in proper operating condition.

FCC statement on regulation

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

- 6 -

IMPORTANT SAFETY INFORMATION

TABLE OF CONTENTS

Any changes or modications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment o and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio TV technician for help.

This class[B] digital apparatus complies with Canadian ICES-003.

This marking indicates that this product should not be disposed with other household

wastes throughout North America. To prevent possible harm to the environment or

human health from uncontrolled waste disposal, recycle it responsibly to promote

the sustainable reuse of material resources. To return your used device, please use the

return and collection systems or contact the retailer where the product was purchased.

They can take this product for environmental safe recycling.

!

WARNING

DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD

This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can

cause severe internal burns in just 2 hours and can lead to death.

Keep new and used batteries away from children. If the battery compartment does not close securely,

stop using the product and keep it away from children.

If you think batteries might have been swallowed or placed inside any part of the body, seek immediate

medical attention.

- 7 -

Need Help? .....................................................................................................................2

Warnings ........................................................................................................................ 3

Important Safety Information ........................................................................................ 4

What’s Included ..............................................................................................................8

Product Information .......................................................................................................8

Operating Instructions ...................................................................................................12

Connecting Power .......................................................................................12

Battery Backup ...........................................................................................12

Installing the battery ..................................................................................13

Daylight Saving Time (DST) / Summer Time ................................................13

Setting the Date & Time ..............................................................................14

Setting Alarm 1 & Alarm 2 ..........................................................................15

Alarm Duration ...........................................................................................17

Snooze Function .........................................................................................17

Sleep Timer ................................................................................................. 17

Adjusting LED Brightness ............................................................................18

Listening to the Radio .................................................................................18

To Set / Recall the Radio Presets .................................................................18

USB Charging Function ...............................................................................19

Troubleshooting ............................................................................................................20

Care and Maintenance ...................................................................................................20

Specications ................................................................................................................21

Electrohome Warranty ...................................................................................................22

TABLE OF CONTENTS

- 8 -

WHAT’S INCLUDED

FRONT - LED SCREEN

1

LED dot appears, indicating AM Band is selected

2

LED dot appears, indicating FM Band is selected

3

Alarm 1 - LED dot appears, when Alarm 1 is set

4

Displays the hour

5

Displays the minutes

6

LED dot appears, indicating time is set to PM

7

LED dot appears, to indicate LED Time Display is set to OFF

8

Volume Setting

9

Alarm 2 - LED dot appears, when Alarm 2 is set

PRODUCT INFORMATION

• USB Charging Alarm Clock Radio

• Quick Start Guide

• Power Adapter

• Instructional Manual

• 1 x 3V, CR2032 Flat Lithium battery

1

4

2

3

5

6

7

8

9

PRODUCT INFORMATION

VOL

- 9 -

PRODUCT INFORMATION

1

Increases Volume

2

Turns Power ON/OFF /AM/FM

Band Selector

3

Decreases Volume

1

Power Input

2

Charges USB devices

1

2

3

FRONT BUTTONS

AM/F

M

1 2

REAR PANEL

- 10 -

PRODUCT INFORMATION

1

Set Radio Presets

2

Set ALARM 1

3

Set ALARM 2

4

SNOOZE / SLEEP / LED BRIGHTNESS / TIME ZONE

5

Set TIME / Y-M-D / 24h-12h Clock ; View Temperature

6

View D-M-Y / Tune-Scan Radio (BACK)

7

Set DST / Tune-Scan Radio (FORWARD) / Select °C OR °F

TOP BUTTONS

PRODUCT INFORMATION

DIMMER

PRESETS

SNOOZE/SLEEP

1 2 3 4 5 6 7

- 11 -

BOTTOM

PRODUCT INFORMATION

1

Battery compartment for 1 x 3V, CR2032 Flat Lithium battery

2

FM Antenna

3

Indoor Temperature Sensor

1

2

3

- 12 -

OPERATING INSTRUCTIONS

CONNECTING POWER

The USB Charging Alarm Clock Radio is equipped with an "AUTO TIME SET" feature.

When power is connected, the clock display will ash '2' which is TIME ZONE 2

(Eastern time) and the default TIME ZONE setting. The correct time will be displayed,

unless you are in another time zone.

To select TIME ZONE 2 (Eastern time) as your default time zone:

• Press ONCE to conrm your selection.

To change your time zone upon setup:

• Press / until your own time zone appears on the display; press ONCE to

conrm your selection.

To change your time zone after setup:

• Press and hold the SNOOZE/SLEEP/DIMMER button until numbers ash.

• Press / until your own time zone appears on the display; press ONCE to

conrm your selection.

There are 8 programmed times zones:

BATTERY BACKUP

This alarm clock is equipped with a battery backup feature. This feature will restore your

alarm clock settings in the event of a power outage. The 3V, CR2032 Flat Lithium battery

is pre-installed at the factory, however, should you need to replace the battery, please

read the following instructions.

Zone 0 - Newfoundland time

Zone 1 - Atlantic time

Zone 2 - Eastern time (default)

Zone 3 - Central time

Zone 4 - Mountain time

Zone 5 - Pacic time

Zone 6 - Alaska time

Zone 7 - Hawaiian time

OPERATING INSTRUCTIONS

- 13 -

Zone 6 - Alaska time

Zone 7 - Hawaiian time

OPERATING INSTRUCTIONS

INSTALLING THE BATTERY

1. Using a small Phillips Head screwdriver, remove the screw from the battery panel

on the bottom of the unit.

2. Remove the battery compartment panel.

3. Remove/properly dispose of depleted battery and replace with new, 3V, CR2032

Flat Lithium battery.

4. Close the battery compartment and put screw into place to secure battery panel.

ATTENTION

• When replacing the battery, do not disconnect AC plug from AC outlet. Current time and alarm will be initialized.

• Do not plug or unplug the power cable if you have wet hands.

• If you are not planning to use the unit for an extended period of time, disconnect the power cable from the wall outlet.

• Do not pull on the cord! You may damage the power cord and may cause an electric shock when disconnecting the

power cord from the wall outlet. Pull rmly at the base of the plug.

DAYLIGHT SAVING TIME DST / SUMMER TIME

Daylight Saving Time/Summer Time is automatically preset.

• Daylight saving time begins at: 2:00 AM on the second Sunday of March.

• Standard time begins at: 2:00 AM on the rst Sunday of November.

Cancelling / reactivating Automatic DST/Summer Time

1. To CANCEL DST/Summer Time, press and hold the DST/°C °F button for

3 seconds while the radio is OFF.

2. 'OFF' will appear in the display to show that the Automatic DST/Summer Time

adjustment is cancelled. The display will return to the clock.

• Batteries must be installed by an adult.

• Use only the recommended size and type of battery specied.

• Please be sure to follow the correct polarity when installing the battery in the battery

compartment. A reversed battery may cause damage to the alarm clock.

• When not using the unit for a prolonged period of time, please remove the batteries to

avoid possible damage caused by leaking batteries.

- 14 -

OPERATING INSTRUCTIONS

3. To REACTIVATE DST/Summer Time, press and hold the DST/°C °F button for 3

seconds while the radio is OFF.

4. 'ON' will appear in the display to show that the Automatic DST/Summer Time

adjustment is reactivated. The display will return to the clock.

SETTING THE DATE & TIME

To change the Date/Time, press and hold the button. The settings below will

appear in the following order:

Year > Month > Day > 12/24 H > Hour > Min

1. Press the button to DECREASE numbers or to toggle through settings.

2. Press the button to INCREASE numbers or to toggle through the dierent

settings.

3. To conrm your selection, press the button once again.

• The timing of Automatic DST/Summer Time employed by the unit (see above) is

subjected to variations by region and the law in each country/region. In such a

case, cancel the Automatic DST/Summer Time adjustment.

• If you live in a country/region that has not introduced Daylight Saving Time/

Summer Time, you must cancel Automatic DST/Summer Time adjustment before

using the unit.

• LED dot appears to the right of PM indicating time is set to PM; no dot for AM.

• Pressing the or the buttons once, decreases/increases one number

at a time.

• Pressing and holding the or the buttons quickly decreases/increases

the numbers.

OPERATING INSTRUCTIONS

- 15 -

SETTING ALARM 1 & ALARM 2

To set ALARM 1, press and hold the

button and alarm time will ash. The settings

below will appear in the following order:

AL 1 Hour > AL 1 Min > AL 1 Alarm Modes > AL 1 Wake Options > AL 1 Radio Volume

1. Press the

/ buttons to decrease/increase the HOUR; press the

button to conrm HOUR. The MINUTES will begin to ash.

2. Press the

/ buttons to decrease/increase the MINUTES; press the

button to conrm MINUTES. ALARM MODES will ash.

ALARM MODES allows you to set more than one alarm in a week i.e. ALARM 1 set to

wake you Monday-Friday and ALARM 2 set to wake you on weekends. The ALARM MODE

settings are as follows:

1-5 : Monday to Friday 3: Wednesday

1-7 : Whole week 4: Thursday

6-7 : Saturday & Sunday 5: Friday

1 : Monday 6: Saturday

2 : Tuesday 7: Sunday

3. Press the / buttons to toggle between the ALARM MODE settings then press

the

button to conrm your selection. The WAKE OPTIONS will begin to ash.

4. Press the / buttons to toggle between the WAKE OPTIONS AM, FM or

BELL; press the

button to conrm your selection. If AM or FM is selected the

Radio Volume selection will begin to ash.

5. Press the / buttons to decrease/increase the Radio Volume; press the

button to conrm your selection, and complete the alarm set up.

6. Alarm will be armed once alarm setup is completed.

OPERATING INSTRUCTIONS

- 16 -

SETTING ALARM 2

To set ALARM 2, press and hold the button and alarm time will ash. The settings

below will appear in the following order:

AL 2 Hour > AL 2 Min > AL 2 Alarm Modes > AL 2 Wake Options > AL 2 Radio Volume

1. Press the / buttons to decrease/increase the HOUR; press the button

to conrm HOUR. The MINUTES will begin to ash.

2. Press the / buttons to decrease/increase the MINUTES; press the

button to conrm MINUTES. ALARM MODES will ash.

ALARM MODES allows you to set more than one alarm in a week i.e. ALARM 1 set to

wake you Monday-Friday and ALARM 2 set to wake you on weekends. The ALARM MODE

settings are as follows:

1-5 : Monday to Friday 3: Wednesday

1-7 : Whole week 4: Thursday

6-7 : Saturday & Sunday 5: Friday

1 : Monday 6: Saturday

2 : Tuesday 7: Sunday

3. Press the / buttons to toggle between the ALARM MODE settings then

press the button to conrm your selection. The WAKE OPTIONS will begin to ash.

4. Press the / buttons to toggle between the WAKE OPTIONS AM, FM or

BELL; press the button to conrm your selection. If AM or FM is selected the

Radio Volume selection will begin to ash.

5. Press the / buttons to decrease/increase the Radio Volume; press the

button to conrm your selection, and complete the alarm set up.

6. Alarm will be armed once alarm setup is completed.

To deactivate ALARM 1 and/or ALARM 2, tap the button and/or the button until

the LED is no longer visible on the front LED panel.

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS

- 17 -

OPERATING INSTRUCTIONS

ALARM DURATION

The BUZZER alarm or RADIO alarm will sound for 30 minutes if no key is pressed, then

it will stop automatically and resume to the same alarm time on next scheduled day. To

stop ALARM 1 and/or ALARM 2 when sounding, press the button on the front of the

unit.

SNOOZE FUNCTION

When alarm is sounding, press the SNOOZE/SLEEP button to stop alarm for 9 minutes.

Alarm will resume after 9 minutes.

• Pressing the button on the front of the unit will CANCEL the Snooze function

• Snooze function will also stop automatically after 30 minutes.

SLEEP TIMER

The sleep timer allows you to listen to music for a preset amount of time ranging from 90

minutes to 15 minutes. It is commonly used by people who prefer to fall asleep to music.

1. Press the button to turn the radio 'ON'.

2. Press the SNOOZE/SLEEP button to toggle through the preset times;

90min > 60min > 30min > 15min > OFF

3. To cancel the SLEEP timer, press the SNOOZE/SLEEP button until you see OFF in

the display or press the button to turn o the radio.

OPERATING INSTRUCTIONS

- 18 -

ADJUSTING LED BRIGHTNESS

You can adjust the brightness of the LED display making it brighter, dimmer or even

turning it OFF when the radio is OFF. There are four dimming options available: HIGH/

MEDIUM/LOW/OFF Standby. Press the DIMMER button to toggle between the four

brightness settings.

LISTENING TO THE RADIO

1. Press the button on the front panel to turn the radio 'ON'.

2. Press and hold the AM / FM button to toggle between AM and FM radio bands.

3. Press the / buttons once, to move back/move forward one station at a

time.

4. Press and hold the / buttons for one second to scan back/forward through

the stations; the unit will automatically scan to the next broadcasting station.

5. Press the button on the front panel to turn the radio 'OFF'.

Please ensure that the FM antenna is completely unrolled and extended for best FM reception. The

AM band uses an internal directional aerial. For best reception, please rotate the radio.

TO SET / RECALL THE RADIO PRESETS

1. Press the button on the front panel to turn the radio 'ON'.

2. Press and hold the AM / FM button to toggle between AM and FM radio bands.

3. Use the / buttons to select the desired radio station.

4. Press and hold the PRESETS button; 'P02' will blink in the display.

5. Use the / buttons to toggle to the desired preset 'P01-P10' number.

6. Press the PRESETS button again to set the preset.

7. Repeat steps 2 through 4 to set more presets.

8. To select a preset station, press the PRESETS button until desired preset station

appears on the LED panel.

The unit supports up to 10 AM & 10 FM preset stations.

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS

- 19 -

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS

USB CHARGING FUNCTION

This alarm clock is equipped with a convenient USB charging port on the back panel

that allows you to recharge many brands of smartphones, tablets and portable music

players. To charge your device, connect the USB charging cable that is connected to your

handheld device to the USB charging port on the back panel of this alarm clock.

Charging time will vary depending on the charging current that your device requires.

Therefore, some devices will take longer to charge than others.

- 20 -

Please consult the Troubleshooting chart below before communicating with

ELECTROHOME Customer Support.

SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION

GENERAL

Power does not come on AC cord not plugged in Insert plug rmly into AC outlet

RADIO

No Sound Power is not on

Press the button

VOLUME control at minimum

position

Turn the VOLUME control up

1. Disconnect the unit from any power sources before cleaning.

2. Keep the unit away from magnetic objects, water or heat sources.

3. Clean only with a dry cloth.

TROUBLESHOOTING

CARE AND MAINTENANCE

SPECIFICATIONS

Noise or sound distorted

on AM or FM

AM-interference from trac Tune the radio for better AM reception

FM-antenna wire not extended Extend antenna wire

SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION

CLOCK

Incorrect Time Clock not set Set the clock

Battery is inserted incorrectly,

or depleted

Check/replace the battery

Alarm does not turn on Alarm is not set to turn on

Activate ALARM 1 or ALARM 2

Clock is not set Set the clock

Alarm time is not set Set alarm time for

ALARM 1 or ALARM 2

No display Dimmer is set to Standby Mode Press Dimmer button

La page est en cours de chargement...

Electrohome ELEEAAC470 Manuel utilisateur

Electrohome ELEEAAC470 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents