Motorola RMU2043 Manuel utilisateur

Catégorie
Radios bidirectionnelles
Taper
Manuel utilisateur

Ce manuel convient également à

User Guide
Guide de l’utilisateur
RM Series™/Séries RM™
Two-Way Radios
Radios bidirectionnelles
Models RMU 2040, RMM2050 / Modèles RMU2043
Open Source Software Legal Notices:
This Motorola product contains Open Source Software. For information regarding
licenses, acknowledgements, required copyright notices and other usage terms,
refer to the documentation for this Motorola product at:
http://businessonline.motorolasolutions.com
Go to: Resource Center > Product Information > Manual > Accessories.
English
1
CONTENTS
CONTENTS
Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Product Safety. . . . . . . . . . . . . . . . . . . . . . . .4
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . .5
FCC Licensing Information . . . . . . . . . . . . .7
Canada Licensing Information. . . . . . . . . . .9
Batteries and Chargers
Safety Information. . . . . . . . . . . . . . . . . . . . .8
Operational Safety Guidelines. . . . . . . . . . . . .9
Radio Overview . . . . . . . . . . . . . . . . . . . . . .10
Parts Of The Radio . . . . . . . . . . . . . . . . . . . .10
On/Off/Volume Knob. . . . . . . . . . . . . . . .11
Accessory Connector . . . . . . . . . . . . . . .11
Model Label . . . . . . . . . . . . . . . . . . . . . .11
Microphone . . . . . . . . . . . . . . . . . . . . . . .11
Antenna. . . . . . . . . . . . . . . . . . . . . . . . . .11
LED Indicator . . . . . . . . . . . . . . . . . . . . .11
Side Buttons . . . . . . . . . . . . . . . . . . . . . .11
The Lithium-Ion (Li-Ion) Battery . . . . . . .11
Battery Features . . . . . . . . . . . . . . . . . . . . . .13
About the Li-Ion Battery . . . . . . . . . . . . .13
Battery Recycling and Disposal . . . . . . .14
Installing the Lithium-Ion
(Li-Ion) Battery . . . . . . . . . . . . . . . . . . 15
Removing the Lithium-Ion
(Li-Ion) Battery . . . . . . . . . . . . . . . . . . 15
Holster . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Power Supply, Adaptor and
Drop-in Tray Charger . . . . . . . . . . . . . 16
Battery Life Information . . . . . . . . . . . . . 17
Charging the Battery . . . . . . . . . . . . . . . 18
Drop-in Tray Charger LED Indicators . . 20
Estimated Charging Time . . . . . . . . . . . 21
Multi-Unit Charger LED Indicators . . . . . 23
Getting Started . . . . . . . . . . . . . . . . . . . . . . 25
Turning radio ON/OFF . . . . . . . . . . . . . . . . . 25
Adjusting Volume . . . . . . . . . . . . . . . . . . . . . 25
Selecting a Channel . . . . . . . . . . . . . . . . . . . 25
Talking and Monitoring. . . . . . . . . . . . . . . . . 25
Receiving a Call . . . . . . . . . . . . . . . . . . . . . . 26
Talk Range. . . . . . . . . . . . . . . . . . . . . . . . . . 26
Radio LED Indicators . . . . . . . . . . . . . . . . . . 28
Hands-Free Use/VOX . . . . . . . . . . . . . . . . . 29
With Compatible VOX Accessories . . . . 29
Setting VOX Sensitivity . . . . . . . . . . . . . 30
English
2
CONTENTS
Microphone Gain. . . . . . . . . . . . . . . . . . .30
Hands Free Without Accessories
(iVOX) . . . . . . . . . . . . . . . . . . . . . . . . .30
Power Up - Tone Mode. . . . . . . . . . . . . .30
Reset to Factory Defaults . . . . . . . . . . . .30
Toggle Voice Prompt in User Mode . . . .31
Programming Features . . . . . . . . . . . . . . . .32
Advanced Configuration Mode . . . . . . . . . . .32
Entering Advanced Configuration
Mode . . . . . . . . . . . . . . . . . . . . . . . . . .33
Entering Frequencies Values . . . . . . . . .33
Reading CTCSS / DPL Values . . . . . . . .34
Reading Auto-Scan Values. . . . . . . . . . .34
Active Channels . . . . . . . . . . . . . . . . . . .34
Saving Settings. . . . . . . . . . . . . . . . . . . .34
Programming Values Example . . . . . . . . . . .36
Example of Programming a
Frequency . . . . . . . . . . . . . . . . . . . . . .36
Example of Programming a Code. . . . . .37
Example of Programming Auto-Scan . . .37
Example of Programming
Active Channels . . . . . . . . . . . . . . . . .38
Other Programming Features . . . . . . . . . . . .38
Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Editing Scan List . . . . . . . . . . . . . . . . . . 39
Nuisance Channel Delete . . . . . . . . . . . 39
Customer Programming Software (CPS) . . . 40
Bandwidth Select
(Only for Canada models) . . . . . . . . . 41
Time-Out Timer . . . . . . . . . . . . . . . . . . . 41
Power Select . . . . . . . . . . . . . . . . . . . . . 41
Call Tones . . . . . . . . . . . . . . . . . . . . . . . 41
Scramble . . . . . . . . . . . . . . . . . . . . . . . . 41
Reverse Burst . . . . . . . . . . . . . . . . . . . . 42
Cloning Radios. . . . . . . . . . . . . . . . . . . . . . . 42
Cloning with a Multi Unit
Charger (MUC) . . . . . . . . . . . . . . . . . 43
CPS and Cloning Cables
(Optional Accessory) . . . . . . . . . . . . . 44
Cloning Radio using the Radio
to Radio (R2R) Cloning
Cable (Optional Accessory) . . . . . . . . 45
Cloning using the Customer
Programming Software (CPS) . . . . . . 47
Troubleshooting. . . . . . . . . . . . . . . . . . . . . 48
Use and Care . . . . . . . . . . . . . . . . . . . . . . . 52
English
3
CONTENTS
Frequency and Code Charts . . . . . . . . . . .53
RMU2043 – UHF Default Frequencies
Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
RMU2040 – UHF Default Frequencies
Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
RMM2050 – VHF-MURS Default
Frequencies Chart . . . . . . . . . . . . . . . . . . .55
CTCSS and PL/DPL Codes . . . . . . . . . . . . .56
Motorola Limited Warranty for the
United States and Canada . . . . . . . . . . . . .62
Accessories . . . . . . . . . . . . . . . . . . . . . . . . .66
Audio Accessories. . . . . . . . . . . . . . . . . . . . .66
Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Software Applications . . . . . . . . . . . . . . . . . .66
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Carry Accessories . . . . . . . . . . . . . . . . . . . . .67
English
4
PRODUCT SAFETY
PRODUCT SAFETY
PRODUCT SAFETY AND RF
EXPOSURE COMPLIANCE
ATTENTION!
Models RMU2040 and RMU2043 are restricted
to occupational use only to satisfy FCC RF
energy exposure requirements. Model
RMM2050 complies with general population
and uncontrolled environment requirements.
Notice to Users (FCC and Industry Canada)
This device complies with Part 15 of the FCC
rules and RSS 210 of the Industry Canada
rules per the conditions listed below:
1. This device may not cause harmful interference.
2. This device must accept any interference
received including interference that may cause
undesired operation.
3. Changes or modifications made to this device,
not expressly approved by Motorola, could void
the users authority to operate this equipment.
Under Industry Canada regulations, this
radio transmitter may only operate using an
antenna of a type and maximum (or lesser)
gain approved for the transmitter by Industry
Canada. To reduce potential radio interference
to other users, the antenna type and its gain
should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more
than that necessary for successful
communication.
Before using this product,
read the operating
instructions and RF energy
awareness information
contained in the Product
Safety and RF Exposure
booklet enclosed with your
radio.
!
C a u t i o n
English
5
INTRODUCTION
INTRODUCTION
Thank you for purchasing the Motorola® RM
Series™ Radio. This radio is a product of
Motorola's 80 plus years of experience as a
world leader in the designing and
manufacturing of communications equipment.
The RM Series™ radios provide cost-effective
communications for businesses such as retail
stores, restaurants, schools, construction sites,
manufacturing, property and hotel
management and more. Motorola professional
two-way radios are the perfect communications
solution for all of today's fast-paced industries.
Note: Read this user guide carefully to ensure you
know how to properly operate the radio
before use
Business Radios,
RPSD 1C15, Motorola
8000 West Sunrise Boulevard
Plantation, Florida 33322
PACKAGE CONTENTS
Radio
Holster
Lithium-Ion Battery
Power Supply
Quick Reference Guide
Warranty Card
Drop-in Tray Charger
Product Safety & RF Exposure Booklet
English
6
INTRODUCTION
This User Guide can be downloaded from
www.motorolasolutions.com/RMSeries. For
product-related questions, contact:
1-800-448-6686 in the USA
1-800-461-4575 in Canada
1-888-390-6456 on TTY (Text Telephone)
FCC LICENSING
INFORMATION
English
7
FCC LICENSING
INFORMATION
INTERFERENCE INFORMATION
This device complies with Part 15 of the FCC
Rules. Operation is subject to the condition that
this device does not cause harmful
interference.
RM Series™ Business two-way radios operate
on radio frequencies that are regulated by the
Federal Communications Commission (FCC).
To transmit on these frequencies, you are
required to have a license issued by the FCC.
Application is made available on FCC Form
601 and Schedules D, H, and Remittance Form
159.
To obtain these FCC forms, request document
000601 which includes all forms and
instructions. If you wish to have the document
faxed, mailed or have questions, use the
following contact information.
Faxed contact the
Fax-On- Demand
system at:
Mailed call the FCC forms hotline at:
Questions regarding FCC
license contact the FCC at:
1-202-418-0177 1-800-418-FORM
1-800-418-3676
1-888-CALL-FCC
1-888-225-5322
Or: http://www.fcc.gov
English
8
FCC LICENSING
INFORMATION
Before filling out your application, you must
decide which frequency(ies) you can operate
on. See “Frequencies and Code Charts”. For
questions on determining the radio frequency,
call Motorola Product Services at:
1-800-448-6686
Changes or modifications not expressly
approved by Motorola may void the users
authority granted by the FCC to operate this
radio and should not be made. To comply with
FCC requirements, transmitter adjustments
should be made only by or under the
supervision of a person certified as technically
qualified to perform transmitter maintenance
and repairs in the private land mobile and fixed
services as certified by an organization
representative of the user of those services.
Replacement of any transmitter component
(crystal, semiconductor, etc.) not authorized by
the FCC equipment authorization for this radio
could violate FCC rules.
Use of this radio outside the country where it
was intended to be distributed is subject to
government regulations and may be prohibited
English
9
CANADA LICENSING
INFORMATION
CANADA LICENSING
INFORMATION
GENERAL INFORMATION
The operation of your Motorola radio is subject
to the Radiocommunications Act and must
comply with rules and regulations of the
Federal Government’s department of Industry
Canada. Industry Canada requires that all
operators using Private Land Mobile
frequencies obtain a radio license before
operating their equipment.
An application for your Industry Canada license
is made on the form included with your radio.
Additional forms and latest license application
versions can be obtained from the nearest
Industry Canada District office. A list of these
offices is included for your information.
THE LICENSE APPLICATION
General Instructions
1. Fill in the items as per the instructions. If you
need additional space for any item use the
reverse side of the application.
2. Be sure to use a typewriter or print legibly.
3. Make a copy for your files.
4. Prepare a cheque or money order made out to
the “Receiver General for Canada”, for an
amount, which is on the following schedule, for
each radio purchased. (License is valid until
April 1st of each year, and the renewed.
5. Mail your completed application, along with your
cheque or money order to the closest Industry
Canada District office, according to the list on
pages
To obtain the latest Canadian License
Application form, please go to:
www.ic.gc.ca
English
8
BATTERIES AND CHARGERS
SAFETY INFORMATION
BATTERIES AND
CHARGERS SAFETY
INFORMATION
This document contains important safety and
operating instructions. Read these instructions
carefully and save them for future reference.
Before using the battery charger, read all the
instructions and cautionary markings on
the charger,
the battery, and
the radio using the battery
1. To reduce risk of injury, charge only the
rechargeable Motorola-authorized batteries.
Other batteries may explode, causing personal
injury and damage.
2. Use of accessories not recommended by
Motorola may result in risk of fire, electric
shock, or injury.
3. To reduce risk of damage to the electric plug
and cord, pull by the plug rather than the cord
when disconnecting the charger.
4. An extension cord should not be used unless
absolutely necessary. Use of an improper
extension cord could result in risk of fire and
electric shock. If an extension cord must be
used, make sure that the cord size is 18AWG
for lengths up to 100 feet (30.48 m), and
16AWG for lengths up to 150 feet (45.72 m).
5. To reduce risk of fire, electric shock, or injury, do
not operate the charger if it has been broken or
damaged in any way. Take it to a qualified
Motorola service representative.
6. Do not disassemble the charger; it is not
repairable and replacement parts are not
available. Disassembly of the charger may
result in risk of electrical shock or fire.
7. To reduce risk of electric shock, unplug the
charger from the AC outlet before attempting
any maintenance or cleaning
English
9
BATTERIES AND CHARGERS
SAFETY INFORMATION
OPERATIONAL SAFETY
GUIDELINES
Turn the radio OFF when charging battery.
The charger is not suitable for outdoor use. Use
only in dry locations/conditions.
Connect charger only to an appropriately fused
and wired supply of the correct voltage (as
specified on the product).
Disconnect charger from line voltage by removing
main plug.
The outlet to which this equipment is connected
should be nearby and easily accessible.
In equipment using fuses, replacements must
comply with the type and rating specified in the
equipment instructions.
Maximum ambient temperature around the power
supply equipment must not exceed 40°C (104°F).
Power output from the power supply unit must not
exceed the ratings stated on the product label
located at the bottom of the charger.
Make sure that the cord is located where it will
not be stepped on, tripped over, or subjected to
water, damage, or stress.
English
10
RADIO OVERVIEW
RADIO OVERVIEW
PARTS OF THE RADIO
Antenna
Microphone
On/Off/Volume
Knob
LED
Indicator
SB2 - Channel
Down Button
(Default)
SB1 - Monitor
Button
Battery
Model Label
PTT (Push-To-
Talk) Button
Audio Accessory
2 Pin Connector
English
11
RADIO OVERVIEW
On/Off/Volume Knob
Used to turn the radio ON or OFF and to adjust
the radio’s volume.
Accessory Connector
Used to connect compatible audio accessories.
Model Label
Indicates the model of the radio.
Microphone
Speak clearly into the microphone when
sending a message.
Antenna
On all RM Series radios, the antenna is non-
removable.
LED Indicator
Used to give battery status, power-up status,
radio call information and scan status.
Side Buttons
Push-to-Talk (PTT) Button
Press and hold down this button to talk, release it
to listen.
Side Button 1 (SB1)
The Side Button 1 is a general button that can be
configured by the Customer Programming
Software - CPS. The default setting of SB1 is
‘Monitor’.
Side Button 2 (SB2)
The Side Button 2 is a general button that can be
configured by the CPS. The SB2 default setting is
‘scroll Down’ until the desired channel is selected.
The Lithium-Ion (Li-Ion) Battery
RM Series comes with a Li-Ion battery. For
more information, see “Battery Features” on
page 13.
English
12
RADIO OVERVIEW
This User Guide covers multiple RM Series
models, and may detail some features your
radio does not have. The radio’s model is
shown on the bottom of the radio and provides
the following information:
Table 1: RM Series Radio Specifications
Model
Frequency
Band
Transmit
Power
(Watts)
Number of
Channels
Antenna
RMU2043 UHF 2 4 Non-removable
RMU2043 UHF 2 4 Non-removable
RMM2050 VHF-MURS 2 5 Non-removable
English
13
RADIO OVERVIEW
BATTERY FEATURES
About the Li-Ion Battery
The RM Series™ radio comes equipped with a
rechargeable Li-Ion battery. This battery should
be charged fully before initial use to ensure
optimum capacity and performance.
Battery life is determined by several factors.
Among the more critical are the regular
overcharge of batteries and the average depth
of discharge with each cycle. Typically, the
greater the overcharge and the deeper the
average discharge, the fewer cycles a battery
will last. For example, a battery which is
overcharged and discharged 100% several
times a day, lasts fewer cycles than a battery
that receives less of an overcharge and is
discharged to 50% per day. Further, a battery
which receives minimal overcharging and
averages only 25% discharge, lasts even
longer.
Motorola batteries are designed specifically to
be used with a Motorola charger and vice
versa. Charging in non-Motorola equipment
may lead to battery damage and void the
battery warranty. The battery should be at
about 77°F (25°C) (room temperature),
whenever possible. Charging a cold battery
(below 50° F [10°C]) may result in leakage of
electrolyte and ultimately in failure of the
battery. Charging a hot battery (above 95°F
[35°C]) results in reduced discharge capacity,
affecting the performance of the radio.
Motorola rapid-rate battery chargers contain a
temperature-sensing circuit to ensure that
batteries are charged within the temperature
limits stated above.
English
14
RADIO OVERVIEW
Battery Recycling and Disposal
Li-Ion rechargeable batteries can be recycled.
However, recycling facilities may not be
available in all areas. Under various U.S. state
laws and the laws of several other countries,
batteries must be recycled and cannot be
disposed of in landfills or incinerators. Contact
your local waste management agency for
specific requirements and information in your
area. Motorola fully endorses and encourages
the recycling of Li-Ion batteries. In the U.S. and
Canada, Motorola participates in the
nationwide Rechargeable Battery Recycling
Corporation (RBRC) program for Li-Ion battery
collection and recycling.
Many retailers and dealers participate in this
program. For the location of the drop-off facility
closest to you, access RBRC's Internet web
site at:
www.rbrc.com
or call:
1-800-8-BATTERY
This internet site and telephone number also
provides other useful information concerning
recycling options for consumers, businesses
and governmental agencies.
English
15
RADIO OVERVIEW
Installing the Lithium-Ion (Li-Ion) Battery
1. Turn OFF the radio.
2. With the Motorola logo side up on the battery
pack, fit the tabs at the bottom of the battery
into the slots at the bottom of the radio’s body.
3. Press the top part of the battery towards the
radio until a click is heard.
Note: To learn about the Li-Ion Battery Life
features, refer to “About the Li-Ion Battery”
on page 13
Removing the Lithium-Ion (Li-Ion) Battery
1. Turn OFF the radio.
2. Push down the battery latch and hold it while
removing the battery.
3. Pull the battery away from the radio.
Tabs
Slots
Attach
Press until click
Detach
Press Latch
English
16
RADIO OVERVIEW
Holster
1. Insert the radio into the base of the holster at an
angle. Press the radio against the back of the
holster until the hooks on the holster are
inserted in the top recesses of the battery.
2. To remove, using the top tab on the holster,
detach the hooks of the holster from the top
recesses of the battery. Slide the radio at an
angle and remove from the holster.
Power Supply, Adaptor and Drop-in Tray
Charger
The radio is equipped with one Drop-in Tray
Charger and one Power Supply with Adaptor.
For more information, refer to “Chargers” on
page 67.
Drop-in Tray Charger
Power Supply
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146

Motorola RMU2043 Manuel utilisateur

Catégorie
Radios bidirectionnelles
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues