802.11ac Wave 2
Mesh Wi-Fi Access Point
Model: UDM-B
Introduction
Thank you for purchasing the Ubiquiti® UniFi® Dream
MachineBeacon. This Quick Start Guide is designed to guide
you through installation and also includes warrantyterms.
Package Contents
UDM-B
System Requirement
Either of the following is required:
• iOS or Android
™
Smartphone with UniFi App Installed
• Web Browser: Google Chrome (Other browsers may have
limited functionality)
Hardware Overview
1
System LED
Color State Status
White
Flashing Initializing.
Steady Factory defaults, waiting for
integration.
White/
Blue
Alternating Device is busy; do not touch or
unplug it. This usually indicates
that a process such as a firmware
upgrade is taking place.
Blue
Steady Successfully integrated into a
network and working properly.
Flashing This is used to locate a device.
When you click Locate in the UniFi
Network Controller software, the
LED will flash blue. The software
will also display the location of the
device on themap.
Reset Button
2
Button Description
Reset
Resets to factory defaults. The device
should be running after bootup is
complete. Press and hold the Reset button
for about 10 seconds until the LED starts
flashing and then becomes solidly lit. After
a few seconds, the LED will turn off, and the
device will automatically reboot.
Connecting Power
69.85 mm
114.046 mm
69.85 mm
114.046 mm
Configuration
The UDM-B is automatically discovered by the UniFi Network
Controller of a UniFi AP or UDM that can hear the UDM-B.
Access the configuration screen of the nearby UniFi AP or
UDM. Ensure that Allow meshing from other access points is
enabled (enabled by default).
You have the following options:
• “Using the UniFi Network App”
• “Using the UniFi Network Software”
Using the UniFi Network Software
1. From the UniFi Network Controller dashboard, click
Devices in the left menu bar.
2. On the Devices screen, locate the UDM-B in the list of
devices under the Model column. To adopt the UDM-B,
click Adopt.
3. The System LED on the UDM-B will turn blue to confirm
that it has been successfully adopted.
Specifications
UDM-B
Dimensions 169.7 x 112.15 x 32.2 mm
(6.68 x 4.42 x 1.27")
Weight 260 g
(9.17 oz)
Max. Power Consumption 11.5W
Power Method AC
Power Supply AC
Supported Voltage Range 100 - 240VAC, 0.3A Max., 50/60 Hz
LED System Status
Operating Frequency 2.4 GHz
5 GHz
Max. TX Power
2.4 GHz
5 GHz
23 dBm
26 dBm
Wi-Fi Standards 802.11 a/b/g/n/ac/ac-wave2
Wireless Security WEP, WPA-PSK,
WPA-Enterprise (WPA/WPA2, TKIP/AES)
Operating Temperature -10 to 60° C (14 to 140° F)
Operating Humidity 5 to 95% Noncondensing
Certications FCC, IC
4 Single-Polarity Antennas
(2) Dual-Band (2) Single-Band
2.4 GHz 5 GHz 5 GHz
4.5 dBi 5 dBi 5 dBi
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
WARNING: Do not use this product in a location that can
be submerged by water.
WARNING: Avoid using this product during an electrical
storm. There may be a remote risk of electric shock from
lightning.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current
requirements indicated on the manufacturer’s label. Connection to a
different power source than those specified may result in improper
operation, damage to the equipment or pose a fire hazard if the
limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service
should be provided only by a qualified service technician.
Limited Warranty
ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on
an individual basis, and, where applicable, specify arbitration instead of
jury trials or class actions.
Compliance
FCC
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions.
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This radio transmitter (FCC ID: SWX-UDMB) has been approved by FCC.
ISED Canada
CAN ICES-3(B)/NMB-3(B)
This device complies with ISED Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that
may cause undesired operation of the device.
This radio transmitter (IC: 6545A-UDMB) has been approved by ISED
Canada.
The device for operation in the band 5150-5250 MHz is only for indoor
use to reduce the potential for harmful interference to co-channel mobile
satellite systems.
CAN ICES-3(B)/NMB-3(B)
Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
1. l’appareil ne doit pas produire de brouillage;
2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Le présent émetteur radio (IC : 6545A-UDMB) a été approuvé par ISDE
Canada.
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés
uniquement pour une utilisation à l’intérieur afin de réduire les risques
de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les
mêmes canaux.
IMPORTANT NOTE:
Radiation Exposure Statement:
• This equipment complies with radiation exposure limits set forth for an
uncontrolled environment.
• This equipment should be installed and operated with minimum
distance 20 cm between the radiator and your body.
• This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
AVIS IMPORTANT :
Déclaration sur l’exposition aux rayonnements :
• Cet équipement est conforme aux limites prévues pour l’exposition aux
rayonnements dans un environnement non contrôlé.
• Lors de l’installation et de la mise en fonctionnement de l’équipement,
assurez-vous qu’il y ait une distance minimale de 20 cm entre l’élément
rayonnant et vous.
• Cet émetteur ne doit être installé à proximité d’aucune autre antenne
ni d’aucun autre émetteur, et ne doit être utilisé conjointement à aucun
autre de ces appareils.
©2019 Ubiquiti Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the
Ubiquiti U logo, the Ubiquiti beam logo, and UniFi are trademarks or
registered trademarks of Ubiquiti Inc. in the United States and in other
countries. Apple and the Apple logo are trademarks of Apple Inc., registered
in the U.S. and other countries. App Store is a service mark of Apple Inc.,
registered in the U.S. and other countries. Android, Google, Google Play, the
Google Play logo and other marks are trademarks of Google LLC. All other
trademarks are the property of their respective owners. JL041019
Online Resources
Support help.ui.com
Community community.ui.com
Downloads downloads.ui.com
Ubiquiti Inc.
685 Third Avenue, 27th Floor
New York, NY 10017
USA
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
Ubiquiti UniFi Dream Machine Beacon Guide de démarrage rapide
- Taper
- Guide de démarrage rapide
- Ce manuel convient également à
dans d''autres langues
Documents connexes
-
Ubiquiti U6PLR UniFi + plus Long Range Access Point Manuel utilisateur
-
-
-
-
-
-
-
-
-
