Olympus C-770 ULTRA Le manuel du propriétaire

DIGITAL CAMERA

APPAREIL PHOTO NUM

ÉRIQUE

DIGITALKAMERA

CÁMARA DIGITAL

C-770 Ultra Zoom

BASIC MANUAL

MANUEL DE BASE

EINFACHE ANLEITUNG

MANUAL BÁSICO

ENGLISH..........2

FRANÇAIS .....46

DEUTSCH ......90

ESPAÑOL ....134

basic_e_d4209_7.fm Page 1 Thursday, March 4, 2004 12:48 PM

2 En

En

GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

MENU FUNCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

SHOOTING BASICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Taking still pictures . . . . . . . . . . . . . . . . . . . . . . . . . . .26

If correct focus cannot be obtained (Focus lock) . . . . 27

Recording movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Zooming in on a subject (Optical zoom) . . . . . . . . . . .28

Using the flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Using the self-timer/remote control . . . . . . . . . . . . . . . 30

ADVANCED SHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . 31

PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Playing back still pictures . . . . . . . . . . . . . . . . . . . . . . 33

Viewing movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Protecting pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Erasing pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Formatting (CARD SETUP). . . . . . . . . . . . . . . . . . . . . 36

Playback on TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

PRINT RESERVATION/DIRECT PRINT . . . . . . . . . . . . .38

DOWNLOADING PICTURES TO A COMPUTER . . . . . . 39

ERROR CODES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

CONTENTS

These instructions are only for quick reference. For more details

on the functions described here, refer to the “Reference Manual”

on CD-ROM.

basic_e_d4209_7.fm Page 2 Thursday, March 4, 2004 12:48 PM

En 3

En

J Before using your camera, read this manual carefully to ensure correct use.

J We recommend that you take test shots to get accustomed to your camera before

taking important photographs.

J These instructions are only a basic manual. For more details on the functions described

here, refer to the Reference Manual on the CD-ROM. For connection to the PC or

installation of provided software, refer to the Software Installation Guide included in the

CD-ROM package.

For customers in North and South America

For customers in USA

Declaration of Conformity

Model Number : C-770 Ultra Zoom

RM-2 (Remote control)

Trade Name : OLYMPUS

Responsible Party : Olympus America Inc.

Address : 2 Corporate Center Drive, Melville, New York

11747-3157 U.S.A.

Telephone Number : 1-631-844-5000

Tested To Comply With FCC Standards

FOR HOME OR OFFICE USE

This device complies with Part 15 of the FCC rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference

that may cause undesired operation.

For customers in Canada

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

For customers in Europe

Trademarks

• IBM is a registered trademark of International Business Machines Corporation.

• Microsoft and Windows are registered trademarks of Microsoft Corporation.

• Macintosh is a trademark of Apple Computer Inc.

• All other company and product names are registered trademarks and/or

trademarks of their respective owners.

• The standards for camera file systems referred to in this manual are the “Design

Rule for Camera File System/DCF” standards stipulated by the Japan Electronics

and Information Technology Industries Association (JEITA).

“CE” mark indicates that this product complies with the European

requirements for safety, health, environment and customer

protection. “CE” mark cameras are intended for sales in Europe.

basic_e_d4209_7.fm Page 3 Thursday, March 4, 2004 12:48 PM

4 En

En

GETTING STARTED

J NAMES OF PARTS

Lens

Self-timer/Remote control

lamp

Microphone

DC-IN jack

Flash

A/V OUT jack (MONO)

USB connector

Connector cover

Mode dial

Shutter button

Zoom lever (W/T•GU)

Remote control receiver

Hot shoe

Speaker

Strap eyelet

basic_e_d4209_7.fm Page 4 Thursday, March 4, 2004 12:48 PM

En 5

En

Viewfinder

AE Lock/Custom button (x)

Power switch

Monitor button (f)

Card access lamp

Arrow pad (acbd)

OK/Menu button (e)

Monitor

Flash mode button (#)

Diopter adjustment dial

Self-timer/Remote control button (Z)

Protect button (0)

Rotation button (y)

Flash button

Battery compartment/card cover

Tripod socket

Erase button (S)

QUICK VIEW button

basic_e_d4209_7.fm Page 5 Thursday, March 4, 2004 12:48 PM

6 En

En

J

VIEWFINDER AND MONITOR INDICATIONS

Shooting modes

Still picture Movie

Item Indications

1

Shooting modes P, A, S, M, N, o, m, L, K, J, I, s, P

2

Shutter speed 15" – 1/1000

3

Aperture value F2.8 – F8.0

4

Exposure compensation

Exposure differential

-2.0 – +2.0

-3.0 – +3.0

5

Battery check e, f

6

Green lamp 

7

Flash stand-by

Camera movement

warning/Flash charge

# (Lights)

# (Blinks)

8

Macro mode

Super macro mode

Manual focus

&

%

MF

9

Noise reduction O

10

Flash mode !,

#

, $,

#

SLOW1, HSLOW1,

#SLOW2

11

Flash intensity control w -2.0 – +2.0

12

Drive o, j, i, k, BKT

13

Self-timer

Remote control

Y

<

14

Sound record R

0.0

2288 1712

HQ

00:36

0.0

MPEG4

basic_e_d4209_7.fm Page 6 Thursday, March 4, 2004 12:48 PM

En 7

En

15

Record mode TIFF, SHQ, HQ, SQ1, SQ2, MPEG4

16

Resolution 2288 × 1712, 1280 × 960, 640 × 480 etc.

17

AF target mark

[ ]

18

Number of storable still

pictures

Time remaining

30

00:36

19

AE lock

AE memory

B

C

20

Spot metering n

21

ISO ISO64, ISO100, ISO200, ISO400

22

White balance 5, 3, 1, w, x, y, V

23

White balance

adjustment

B1 – B7, R1 – R7

24

Saturation 6 -5 – +5

25

Sharpness N -5 – +5

26

Contrast J -5 – +5

27

Memory gauge a, b, c, d

Item Indications

basic_e_d4209_7.fm Page 7 Thursday, March 4, 2004 12:48 PM

8 En

En

Playback mode

Still picture Movie

Item Indications

1

Battery check e, f

2

Switch frame J

3

Print reservation,

Number of prints

Movie

< × 10

n

4

Sound record H

5

Protect 9

6

Record mode TIFF, SHQ, HQ, SQ1, SQ2, MPEG4

7

Resolution 2288 × 1712, 1280 × 960, 640 × 480,

320 × 240 etc.

8

Aperture value F2.8 – F8.0

9

Shutter speed 15" – 1/1000

10

Exposure compensation -2.0 – +2.0

11

White balance WB AUTO, 5, 3, 1, w, x, y, V

12

ISO ISO64, ISO100, ISO200, ISO400

13

Date and time ’04.06.17 15:30

14

File number, Frame

number

Playing time/

Total recording time

FILE : 100 – 0030, 30

00:00/00:20

'04.06.17 15:30

0.0

2288*1712

HQ

'04.06.1

7

1

5:30

00:00/00:20

640

480

MPEG4

6

7

11

13

14

12 345

basic_e_d4209_7.fm Page 8 Thursday, March 4, 2004 12:48 PM

En 9

En

Memory gauge

The memory gauge lights up when you take a still

picture. While the gauge is lit, the camera is

storing the picture on the card. The memory

gauge indication changes as shown below

depending on the shooting status. The indication

is not displayed during movie recording.

Battery check

If the remaining battery power is low, the battery check indication changes as

follows when the camera is turned on or while the camera is in use.

2288 1712

HQ

Memory gauge

Battery check

Before

shooting

(Gauge is off)

No more pictures

can be taken

(Fully lit)

Wait until the gauge

returns to the status

on the left to take

the next shot.

One picture

taken

(Lit)

Two or more

taken

(Lit)

Shoot Shoot Shoot

Wait

a b c d

ef

Lights (green)

(Goes off after a while)

Remaining power level:

high

Remaining power level:

exhausted

Charge the battery.

Blinks (red)

Remaining power level:

low

Charge the battery.

BATTERY EMPTY

is displayed.

basic_e_d4209_7.fm Page 9 Thursday, March 4, 2004 12:48 PM

10 En

En

J ATTACHING THE STRAP AND LENS CAP

J CHARGING THE BATTERY

This camera uses an Olympus lithium ion battery (LI-10B). The battery is

dedicated to this camera and other batteries do not work.

The battery is not fully charged when the camera is purchased. Fully charge

the battery on the specified charger (LI-10C) before first use. For details, read

the charger’s instructions (provided).

1 Make sure that the +

and - terminals of

the battery shown in

the illustration on the

right are correctly

oriented when

loading the battery

into the charger.

•

The charge indicator will

light red during charging.

• When charging is

complete, the charger

indicator will change

from red to green.

• Charging normally takes approximately 2 hours.

123

45

Stopper

Ring

Strap

eyelet

Connection terminals

Lithium ion battery

(LI-10B)

Charging indicator

basic_e_d4209_7.fm Page 10 Thursday, March 4, 2004 12:48 PM

En 11

En

J INSERTING AND REMOVING THE

BATTERY AND CARD

1

Make sure the camera is turned off.

• The power switch is set to OFF.

• The monitor is off.

• The viewfinder is off.

• The lens is not extended.

2 Slide the battery compartment/card

cover in the direction of A, then lift

in the direction of B.

• Use the ball of your finger to slide the cover.

Do not use your fingernail as this could

result in injury.

3 Loading the battery

Align the battery as shown and

insert it into the battery

compartment until the battery is

locked in position with the battery

lock knob.

Removing the battery

Slide the knob in the direction of the

arrow. When the battery is ejected,

pull it out of the battery

compartment.

A

B

Battery lock knob

The amount of power consumed varies considerably depending on the

operations performed on the digital camera. If you use an exhausted

battery, the camera may turn off without displaying the battery level

warning.

Low battery warning

basic_e_d4209_7.fm Page 11 Thursday, March 4, 2004 12:48 PM

12 En

En

Inserting a card

Insert the card in the appropriate

direction.

• Insert the card while keeping it straight.

• Inserting the card the wrong way or at an

angle could damage the contact area or

cause the card to jam.

• If the card is not inserted all the way, data

may not be written to the card.

Removing the card

Push the card all the way in to unlock it,

then let it return slowly.

• The card is ejected a short way and then stops.

Hold the card straight and pull it out.

4 Close the battery compartment/card

cover in direction C and then slide it in

the direction shown D.

Notch

Contact area

D

C

Releasing your finger quickly after pushing the card all the way in may

cause it to eject forcefully out of the slot.

Notes for removing the card

basic_e_d4209_7.fm Page 12 Thursday, March 4, 2004 12:48 PM

En 13

En

J POWER ON/OFF

1

Press the tabs on the lens cap as

indicated by the arrows and

remove the lens cap.

2 Slide the power switch to q, K

or n.

• The camera and the monitor turn on.

• The mode in which the camera turns on

varies depending on the position of the

power switch. When the power is turned

on in the shooting mode, the lens

extends.

Shooting modes

K : For taking still pictures. Use the

mode dial to select a shooting

mode.

n : For recording movies.

Playback mode

q : For displaying the pictures you have

taken.

3 To turn the camera off, slide the power switch to OFF.

•In n or q mode, there is no need to set the mode dial. The

camera will record movies or play back pictures regardless of the

position of the mode dial.

• To save battery power, the camera automatically enters the sleep

mode and stops the operation after about 3 minutes of non-

operation. The camera activates again as soon as you operate the

shutter button or zoom lever.

Mode dial

Power switch

Note

basic_e_d4209_7.fm Page 13 Thursday, March 4, 2004 12:48 PM

14 En

En

J SELECTING A LANGUAGE W

1

Slide the power switch to K to turn the camera on.

• Set the mode dial to any setting except h.

2 Press e.

• The top menu is displayed.

3 Press d on the arrow pad to select MODE MENU.

4 Press ac to select the SETUP tab, then press d.

5 Press ac to select W, then press d.

• The green frame moves to the selected item.

6 Press ac to select a language, then press e.

7 Press e again to exit the menu.

8 To turn the camera off, slide the power switch to OFF.

basic_e_d4209_7.fm Page 14 Thursday, March 4, 2004 12:48 PM

En 15

En

J SETTING THE DATE AND TIME X

1

Slide the power switch to K to turn the camera on.

2 Press e.

• The top menu is displayed.

3 Press d on the arrow pad to select MODE MENU.

• When the mode dial is set to h, press c and go to Step 6.

4 Press ac to select the SETUP tab, then press d.

5 Press ac to select X, then press d.

• The green frame moves to the selected item.

6 Press ac to select one of the following date formats:

Y-M-D (Year/Month/Day), M-D-Y (Month/Day/Year), D-M-Y

(Day/Month/Year). Then press d.

• Move to the year setting.

• The following steps show the procedure used when the date and time

settings are set to Y-M-D.

7 Press ac to set the year, then press d to move to the

month setting.

• To move back to the previous setting, press b.

• The first two digits of the year are fixed.

8 Repeat this procedure until the date and time are

completely set.

• The time is displayed in the 24-hour format.

Consequently, 2 p.m. is displayed as 14:00.

9 Press e.

• For a more accurate setting, press e when the time signal hits 00

seconds.

10 To turn the camera off, slide the power switch to OFF.

• The date and time settings will be returned to the factory default

settings if the camera is left without the battery for approximately

one day. The settings will be canceled more quickly if the battery

was only loaded in the camera for a short time before being

removed. Before taking important pictures, check that the date and

time settings are correct.

Note

basic_e_d4209_7.fm Page 15 Thursday, March 4, 2004 12:48 PM

16 En

En

MENU FUNCTIONS

J USING THE MENUS AND TABS

When you turn on the camera and press e, the top menu is displayed on the

monitor. The functions of this camera are set from the menus. This chapter

explains how the menus work, using the P screens in K mode.

How to use the mode menus

1 Press e to display the top menu, then press d.

2 Press ac to select a tab, then press d.

3 Press ac to select an item, then press d.

4 Press ac to select a setting. Press e to complete

setting.

Press e again to exit the menu and return to shooting

status.

MODE MENU

ESP

• Take you directly to the setting

screens.

• Display operational buttons at the

bottom of the screen.

•

The functions registered in the

shortcut menus can also be

accessed from the MODE MENU.

• The functions registered in the

shortcut menus can be changed

in K mode (except h).

• Lets you access the menu

selections to set the ISO,

sharpness, etc.

• Categorizes the settings into 4

tabs.

•Press ac to select a tab and

display the associated menu

items.

• There is no mode menu for h

in K mode.

Use the arrow pad

to select a menu.

MODE MENU

SHORTCUT MENUS

The top menu is displayed.

Press e.

basic_e_d4209_7.fm Page 16 Thursday, March 4, 2004 12:48 PM

En 17

En

Shortcut menus

K mode

n mode

Selects a shooting mode from o (single-frame shooting), j (sequential

shooting), i (high speed sequential shooting), k (AF sequential

shooting) and 7 (auto bracketing).

Selects the metering method (ESP, 5 or MULTI).

Selects the image quality and resolution from TIFF, SHQ, HQ, SQ1 and

SQ2.

Used to take pictures of a close subject. Selects OFF, & or %.

Sets the date and time.

Formats a card.

Extends telephoto capability beyond maximum optical zoom.

Selects the image quality and resolution from MPEG4, SHQ, HQ and SQ.

Sets the appropriate white balance according to the light source.

DRIVE

ESP/5

K

&

X

CARD SETUP

DIGITAL ZOOM

K

WB

basic_e_d4209_7.fm Page 17 Thursday, March 4, 2004 12:48 PM

18 En

En

q mode

Mode menus

The MODE MENU has 4 tabs. Press ac to select a tab and display the

associated menu items.

K mode

Runs through all saved pictures one after another.

MOVIE

PLAYBACK

Plays back movies.

INDEX Creates an index picture of a movie in 9 frames.

EDIT Edits a movie.

Displays all the shooting information on the monitor.

Selects ALL to display all images or 0 to display only protected images.

CAMERA tab

ESP/5 Selects the metering method (ESP, 5 or MULTI).

&

Used to take pictures of a close subject. Selects

OFF, &, %.

m

MOVIE PLAY

INFO

SWITCH FRAME

These instructions are only for quick reference. For more details

on the functions described here, refer to the “Reference Manual”

on CD-ROM.

CARDSEt PIC

CAMERA

DRIVE

ISO

A/S/M

OFF

AUtO

ESP

CAMERA tab

PICTURE tab

CARD tab

SETUP tab

basic_e_d4209_7.fm Page 18 Thursday, March 4, 2004 12:48 PM

La page charge ...

Olympus C-770 ULTRA Le manuel du propriétaire

Ce manuel convient également à

Olympus C-770 ULTRA Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents