Viper 4110V Le manuel du propriétaire

OWNER’S GUIDE

MODEL

The company behind Viper

®

Auto Security

Systems is Directed.

Since its inception, Directed has had one

purpose, to provide consumers with the fin-

est vehicle security and accessories avail-

able. The recipient of nearly 100 patents and

Innovations Awards in the field of advanced

electronic technology.

Quality Directed products are sold and ser-

viced throughout North America and around

the world.

Call (800) 876-0800 for more information

about our products and ser vic es.

Directed is committed to delivering

world class quality products and

services that excite and delight our

customers.

®

NO ONE DARES

COME CLOSE

®

4110V

©

Vista, CA 92081

www.viper.com

i

Congratulations

Congratulations on the purchase of your state-of-the-art keyless entry

and remote start system. Reading this Owner’s Guide prior to using

your system will help maximize the use of your system and its many

features. For any additional questions please contact your authorized

Directed dealer or contact Directed at 1-800-753-0600. (U.S. only)

Important information

Government Regulations and Safety information

Read the Government Regulations and Warning! Safety

First sections of this manual prior to operating this system.

Warning! Failure to heed this information can result in

death, personal injury or property damage and may also

result in the illegal use of the system beyond its intended

purpose.

Your Warranty

Your system comes with a warranty. The warranty terms are detailed at

the end of this guide. Make sure that you receive the proof of purchase

from your dealer, indicating the product was installed by an authorized

Directed dealer.

Replacement remote controls

Please see your authorized dealer or visit us at www.directedstore.com

to order additional remote controls. Remote control part numbers are

found on the back of the device.

Contents

Congratulations ................................................................................................i

Government Regulations and Safety information ........................................... i

Remote Control .................................................................................................3

Remote control functions.....................................................................................3

Standard configuration ..............................................................................3

Using the system .............................................................................................5

Locking ....................................................................................................5

Unlocking ................................................................................................5

Disabling (optional) Starter Kill ..................................................................5

Panic Mode .............................................................................................6

Remote Start ............................................................................................. 6

Valet Take-Over ........................................................................................8

Car Finder ...............................................................................................8

Battery Information ............................................................................................9

Battery replacement ..................................................................................9

Battery Disposal .......................................................................................9

Patent Information .............................................................................................9

Government Regulations ..................................................................................10

Warning! Safety first .......................................................................................11

Caution .................................................................................................12

Limited lifetime consumer warranty ....................................................................13

3

Remote Control

Feature Description

Internal Antenna Used for transmitting information

Transmit LED Active when transmitting information

Command buttons (4)

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

Used to perform arming, disarming, auxiliary channel and

remote start commands

Remote control functions

The remote buttons are used to send commands to the system. The but-

tons indicated below are for standard conﬁguration.

Standard conﬁguration

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

Button

The lock function is controlled by pressing

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

on the remote control

for one second. When held for approximately two seconds, Panic is

activated.

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

Button

The unlocking function is controlled by pressing

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

on the remote con-

trol for one second. You can also turn Panic off with this button.

Button

Silent Mode

™

and an optional auxiliary function are controlled by

pressing

. Silent Mode works by pressing for less than one

second before locking or unlocking. An optional auxiliary function such

as trunk release may be controlled by pressing and holding

for

approximately two seconds.

4

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

Button

The remote start function of your system is controlled by pressing this

button for one second.

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

and Buttons

Car Finder is controlled by pressing these two buttons.

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

and

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

and Buttons

When simultaneously pressed these buttons control the optional rear

window defogger during remote starting. The parking lights ﬂash three

times to conﬁrm activation. Once activated the defogger will turn on

whenever the vehicle is remote started.

The parking lights ﬂash twice when the defogger is deactivated. The

defogger does not turn on when the vehicle is remote started.

Important note: Defogger is an optional feature. Additional parts and

labor may be required. See your Directed dealer for details.

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

and

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

Buttons

Timer mode is activated when these buttons are pressed simultaneously.

When you activate timer mode the parking lights ﬂash four times, after a

1-second delay the engine starts. To turn the engine off, without exiting

timer mode press the

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

.

The system remains in timer mode and will start every 3 hours for a

maximum of 6 starts unless cancelled by turning on the ignition, or by

activating the brake or neutral safety shutdown wires.

The parking lights ﬂash 4 times indicating timer mode is exited.

5

Using the system

Lock

Press and release

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

Doors lock. The horn honks once, and the parking lights ﬂash.

To Lock and Panic

Press and hold

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

. To lock the system, then activate Panic. For

Panic to be effective,the optional horn honk feature must be con-

nected. Press the

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

or

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

button to stop Panic output.

Unlock

Press and release

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

The doors unlock. The horn honks and the parking lights ﬂash.

Remote Start

Press and release

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

Activates (or if On, deactivates) the remote starter. The engine turns On,

or the engine turns Off accordingly. The parking lights ﬂash.

If a Remote start conﬁguration issue prevents the engine from starting,

the parking lights ﬂash a Remote Start fault report to identify the fault.

AUX

Press and hold

An optional auxiliary function such as trunk release may be controlled

by pressing and holding

for approximately two seconds.

6

Disabling (optional) Starter Kill

If your remote control is lost or damaged, you can manually override

the starter kill. To do this, you must have the ve hi cle's ignition key and

know where the Valet button is located. Be sure to check with the in-

staller for the location of the Valet button.

To override the starter kill, turn the ignition on and press and release

the valet button within10 seconds. The vehicle should start. If it does

not start, you may have waited too long; turn the ignition off and repeat

the process.

Location of Valet button: ____________________

Remote Start

This feature allows you to remotely start and run your vehicle for a

pro gram ma ble period of time. This makes it possible to warm up the

engine, and adjust the interior tem per a ture of the ve hi cle with the cli-

mate control system. If interior heating or cooling is desired, the climate

controls must be preset, and the fan blower must be set to the desired

level prior to remote starting the vehicle.

Satmode,

bank

selector

AUDIO

PWR

12

REWFF

PLAY/PROG NR

3456

DISC- DISC+

11:53

XM1-1 CH-001

CH

VOL

SCAN

SOUND

AM/FM

CD/AUX

SAT

RADIO

SEEK

SKIP

RPT

DISP -

MODE

A.SEL

RDM

TUNE

AUTO

OFF

DUAL

A/C

MODE

Channel control

Category

Control

Text selector.

Hold for 10secto toggle

channelor category

tune

modes.

Toggles

Scan

mode

Bank and

present

indicator

Channel

and text

indicator

Preset 1-6.

Hold until beepto

savetoapreset.

CATEGORY

Tune mode

indicator

MODE

DUAL

OFF

AUTO

MAP/

GUIDE

MENU

SETUP

INFO

ZOOM

CANCEL

AUDIO

AUTO

MODE

A/C

LOAD

DISC

TAPE

AM/FM

DISP

MODE

SCAN RPT A.SEL/RDM-SEEK +

1

2

34

5

6

DISC-

DISC+

VOL

PWR

PUSH

TUNE

SOUND

PUSH

XM1-1

VOL

CH

CHANNEL

CATEGORY

NAME

TITLE

:

1

CH

2

CH

3

CH

6

CH

5

CH

4

CH

MODE SCAN SOUND

001-HITS1

POP

MUSICNAME

MUSIC TITLE

Channel control

Category

Control

001 014 018

040 065

115

Toggles between

channel and

Category

Control

Text selector.

Hold for 10secto toggle

channelor category

tune

modes.

Toggles

Scan

mode

Bank and

present

indicator

Channel

and text

indicator

Preset 1-6.

Hold until beepto

savetoapreset.

CATEGORY

Tune mode

indicator

MODE

DUAL

OFF

AUTO

MAP/

GUIDE

MENU

SETUP

INFO

ZOOM

CANCEL

AUDIO

AUTO

MODE

A/C

LOAD

DISC

TAPE

AM/FM

DISP

MODE

SCAN RPT A.SEL/RDM-SEEK +

1

2

34

5

6

DISC-

DISC+

VOL

PWR

PUSH

TUNE

SOUND

PUSH

XM1-1

VOL

CH

CHANNEL

CATEGORY

NAME

TITLE

:

1

CH

2

CH

3

CH

6

CH

5

CH

4

CH

MODE SCAN SOUND

001-HITS1

POP

MUSICNAME

MUSIC TITLE

Channel control

Category

Control

001 014 018

040 065

115

Toggles between

channel and

category

modes

Bank and

present

indicator

Upper display

text mode

selector

Sat mode

and bank

selector

Preset 1-6.

Press until

beepto save

to a preset.

Channeland text

Indicator

fields

Toggles

Scan

mode

Tune mode

indicator

ANTENNA

SC OUTPUT

Sirius-Ready, SAT Radio Ready or select OEM headunits with optional Honda Bus Compatible Translator

Headunit bus cableSiriusConnect Cable

HON-SC1

Honda Bus

Compatible

Translator

Warning! It is unsafe to operate a vehicle’s motor in a

garage or other closed off area. Breathing the ex haust

from the vehicle is hazardous to your health. Never

activate the remote start in an enclosed space.

When you are ready to drive the vehicle:

1. Insert the ignition key and turn it to the ON (not the START)

po sition.

2. Press the brake pedal. The remote start system shuts down and the

engine continues to run because the ignition has been turned on.

Note: If the brake pedal is pressed before the key is in the ON position,

the engine will shut down.

While the vehicle is running during remote start operation, the system

monitors the ve hi cle and automatically shuts down the engine if it receives

any of the following shut-down inputs:

• The brake pedal is pressed.

• The hood is opened.

• The shutdown toggle switch is put into the OFF position.

• The pre-programmed run time (12, 24, or 60 minutes) has elapsed.

• Remote control button

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

is pressed once.

8

Valet Take-Over

The Valet Take-Over feature allows the vehicle to remain running after

the key has been removed from the ignition. This feature is useful for

occasions when you wish to exit and lock the vehicle for short periods

of time, but would like to leave the engine running and the climate

controls on.

To perform Valet Take-Over:

1. Before turning off the engine, press and release

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

on the remote

control for 1 second.

2. Turn the ignition key to the OFF position. The engine will stay run-

ning until the pre- pro gram med time has elapsed or a shutdown

input is received. (See the previous Remote Start section for a

complete list of shut-down inputs.)

Important: This feature will not work if the brake pedal is being

pressed.

Car Finder

Car ﬁnder allows you to locate your vehicle, by having the system ﬂash

the parking lights.

To activate:

1. Press and release the

AUX

Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.

and buttons at the same time.

2. The lights ﬂash 5 times slowly allowing you to locate your ve-

hicle.

Battery Information

The remote control is powered by two 3V, CR2016 batteries. When

the battery begins to weaken, operating range is reduced and the LED

on the remote control dims.

Battery replacement

Locate the small slot on the side of the remote control. Insert a small

slotted screwdriver or equivalent tool into slot and pry the case apart.

Replace battery, while verifying the correct polarity and then snap case

back together.

Battery Disposal

Directed cares about the environment. If you need to dispose

of the battery, please do so in accordance with your munici-

pal requirements for battery disposal.

Patent Information

This product is covered by one or more of the following United States

patents:

Remote Start Patents:

5,349,931; 5,872,519; 5,914,667; 5,952,933; 5,945,936;

5,990,786; 6,028,372; 6,467,448; 6,561,151; 7,191,053;

7,483,783

Vehicle Security Patents:

5,467,070; 5,532,670; 5,534,845; 5,563,576; 5,646,591;

5,650,774; 5,673,017; 5,712,638; 5,872,519; 5,914,667;

5,952,933; 5,945,936; 5,990,786; 6,028,505; 6,452,484

Other patents pending

10

Government Regulations

This device complies with Part 15 of FCC rules. Operation is subject to the fol-

lowing two conditions: (1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that

may cause undesirable operation.

This equipment has been tested and found to comply with the limits for a class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential instal-

lation. This equipment generates and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television, which can be determined by

turning the equipment OFF and ON, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio / TV technician for help.

This device complies with the Industry Canada Radio Standards Speciﬁcation

RSS 210. Its use is authorized only on a no-interference, no-protection basis; in

other words, this device must not be used if it is determined that it causes harm-

ful interference to services authorized by IC. In addition, the user of this device

must accept any radio interference that may be received, even if this interference

could affect the operation of the device.

Warning:

Changes or modiﬁcations not expressly approved by the party responsible for

compliance could void the user’s authority to operate this device.

11

Warning! Safety ﬁrst

The following safety warnings must be observed at all times:

Due to the complexity of this system, installation of this product must only be

performed by an authorized Directed dealer.

When properly installed, this system can start the vehicle via a command signal

from the remote control. Therefore, never operate the system in an enclosed area

or partially enclosed area without ventilation (such as a garage). When parking

in an enclosed or partially enclosed area or when having the vehicle serviced,

the remote start system must be disabled using the installed toggle switch. It is

the user’s sole responsibility to properly handle and keep out of reach from chil-

dren all remote control devices to assure that the system does not unintentionally

remote start the vehicle. THE USER MUST INSTALL A CARBON MONOXIDE

DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO THE VEHICLE.

ALL DOORS LEADING FROM ADJACENT LIVING AREAS TO THE ENCLOSED

OR PARTIALLY ENCLOSED VEHICLE STORAGE AREA MUST AT ALL TIMES

REMAIN CLOSED. These precautions are the sole responsibility of the user.

Use of this product in a manner contrary to its intended mode of operation may

result in property damage, personal injury, or death. (1) Never remotely start the

vehicle with the vehicle in gear, and (2) Never remotely start the vehicle with

the keys in the ignition. The user must also have the neutral safety feature of the

vehicle periodically checked, wherein the vehicle must not remotely start while

the car is in gear. This testing should be performed by an authorized Directed

dealer in accordance with the Safety Check outlined in the product installation

guide. If the vehicle starts in gear, cease remote start operation immediately and

consult with the authorized Directed dealer to ﬁx the problem.

After the remote start module has been installed, contact your authorized dealer

to have him or her test the remote start module by performing the Safety Check

outlined in the product installation guide. If the vehicle starts when performing

12

the Neutral Safety Shutdown Circuit test, the remote start unit has not been

properly installed. The remote start module must be removed or the installer must

properly reinstall the remote start system so that the vehicle does not start in gear.

All installations must be performed by an authorized Directed dealer.

OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN

GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION. OPERAT-

ING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT

IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMMEDIATELY

CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AU-

THORIZED Directed DEALER TO REPAIR OR DISCONNECT THE INSTALLED

REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR

PAY FOR INSTALLATION OR REINSTALLATION COSTS.

Caution

This product is designed for fuel injected, automatic transmission ve-

hicles only. Use of this product in a standard transmission vehicle is

dangerous and contrary to the product's intended use.

13

Limited lifetime consumer warranty

Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace (at

Directed’s election) with a comparable reconditioned model any Directed unit (hereafter the

“unit”), excluding without limitation the siren, the remote transmitters, the associated sensors

and accessories, which proves to be defective in workmanship or material under reason-

able use during the lifetime of the vehicle provided the following conditions are met: the

unit was purchased from an authorized Directed dealer, the unit was professionally installed

and serviced by an authorized Directed dealer; the unit will be professionally reinstalled in

the vehicle in which it was originally installed by an authorized Directed dealer; and the

unit is returned to Directed, shipping prepaid with a legible copy of the bill of sale or other

dated proof of purchase bearing the following information: consumer’s name, telephone

number and address; the authorized dealers name, telephone number and address; com-

plete product description, including accessories; the year, make and model of the vehicle;

vehicle license number and vehicle identification number. All components other than the

unit, including without limitation the siren, the remote transmitters and the associated sensors

and accessories, carry a one-year warranty from the date of purchase of the same. ALL

PRODUCTS RECEIVED BY DIRECTED FOR WARRANTY REPAIR WITHOUT PROOF OF

PURCHASE FROM AN AUTHORIZED DEALER WILL BE DENIED. This warranty is non-

transferable and is automatically void if: the unit’s date code or serial number is defaced,

missing or altered; the unit has been modified or used in a manner contrary to its intended

purpose; the unit has been damaged by accident, unreasonable use, neglect, improper

service, installation or other causes not arising out of defects in materials or construction.

The warranty does not cover damage to the unit caused by installation or removal of the

unit. Directed, in its sole discretion, will determine what constitutes excessive damage and

may refuse the return of any unit with excessive damage.

TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING

BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF

MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON-

INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND

DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME

FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS.

DIRECTED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS

OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS. DIRECTED

SECURITY SYSTEMS, INCLUDING THIS UNIT, ARE DETERRENTS AGAINST POSSIBLE

THEFT. DIRECTED IS NOT OFFERING A GUARANTEE OR INSURANCE AGAINST

VANDALISM, DAMAGE OR THEFT OF THE AUTOMOBILE, ITS PARTS OR CONTENTS;

AND HEREBY EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING

WITHOUT LIMITATION, LIABILITY FOR THEFT, DAMAGE AND/OR VANDALISM. THIS

WARRANTY DOES NOT COVER LABOR COSTS FOR MAINTENANCE, REMOVAL OR

REINSTALLATION OF THE UNIT OR ANY CONSEQUENTIAL DAMAGES OF ANY KIND.

14

IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY,

THE VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA.

CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN

THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED

SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE

PRICE OF THE UNIT. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES

WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES,

INCIDENTAL DAMAGES, DAMAGE TO VEHICLE, DAMAGES FOR THE LOSS OF TIME,

LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY

AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER

A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE SUBJECT TO

THE CONDITIONS AS DESCRIBED HEREIN. THIS WARRANTY IS VOID IF THE UNIT

HAS NOT BEEN PURCHASED FROM DIRECTED, OR AN AUTHORIZED DIRECTED

DEALER, OR IF THE UNIT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE USE,

NEGLIGENCE, ACTS OF GOD, NEGLECT, IMPROPER SERVICE, OR OTHER CAUSES

NOT ARISING OUT OF DEFECT IN MATERIALS OR CONSTRUCTION.

Some states do not allow limitations on how long an implied warranty will last or the exclu-

sion or limitation of incidental or consequential damages. This warranty gives you specific

legal rights and you may also have other rights that vary from State to State.

This warranty is only valid for sale of product(s) within the United States of America and

in Canada. Product(s) sold outside of the United States of America or Canada are sold

“AS-IS” and shall have NO WARRANTY, express or implied.

For further details relating to warranty information of Directed products, please visit the

support section of Directed’s website at: www.directed.com

This product may be covered by a Guaranteed Protection Plan (“GPP”). See your

authorized Directed dealer for details of the plan or call Directed Customer Service at

1-800-876-0800.

920-10011-01 2011-06

Manuel D’Utilisation

iii

Félicitations

Nous vous félicitons d’avoir acheté l’un de nos systèmes haut de

gamme de télédémarrage et de sécurité. La lecture préalable du

présent manuel permet d’optimiser l’utilisation du système et de mieux

tirer parti de sa richesse fonctionnelle. Pour toute autre question,

veuillez vous adresser à un détaillant agréé Directed.

Information importante

Réglementations gouvernementales et consignes de sécurité

Lisez les sections Réglementations gouvernementales et

Avertissement ! La sécurité avant tout dans le présent

manuel avant d’utiliser ce système.

Avertissement ! Le non respect de ces consignes peut

entraîner la mort, des blessures corporelles ou des dom-

mages matériels, et peut aussi être considéré comme

une utilisation illégale du système au-delà de l’utilisation

prévue.

Votre garantie

Votre système est livré avec une garantie. Les conditions de la garantie

sont décrites à la ﬁn de ce guide. Assurez-vous de recevoir la preuve

d’achat auprès de votre revendeur indiquant que le produit a été

installé par un détaillant Directed autorisé.

Télécommandes de remplacement

Veuillez consulter votre revendeur autorisé ou visitez notre site www.

La page charge ...

Viper 4110V Le manuel du propriétaire

Ce manuel convient également à

Viper 4110V Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents