Haier QPSA13 Le manuel du propriétaire

Marque: Haier

Modèle: QPSA13

Catégorie: Climatiseurs mobiles

Taper: Le manuel du propriétaire

49-5000467 Rev. 1 04-21 GEA

Owner’s Manual and

Installation Instruction

Manuel d’utilisation et

instructions d’installation

Manual del propietario y

instrucciones de instalación

QPSA13

QPCA14

QPWA14

Design may vary by model number. La conception peut varier

en fonction du numéro de

modèle

El diseño puede variar según

el número de modelo

Portable Air Conditioner

Climatiseurs portables

Accondicionadores De Aire Para Sala

249-5000467 Rev. 1

ENGLISH

49-5000467 Rev. 1 3

ENGLISH

TABLE OF CONTENTS

RECORD KEEPING

Thank you for purchasing this Haier product. This user manual

will help you get the best performance from your new air

conditioner.

Para referencia futura, registre el modelo y el número de serie

ubicados en el deshumidificador y la fecha de compra.

Staple your proof of purchase to this manual to aid in

obtaining warranty service if needed.

____________________________________________________

Model number

____________________________________________________

Serial number

____________________________________________________

Date of purchase

HAIER WEBSITE

Have a question or need assistance with your appliance? Try the Haier Website 24 hours a day, any day of the year! You

can also shop for more great Haier products and take advantage of all our on-line support services designed for your

convenience. In the US: Haierappliances.com

IMPORTANT SAFETY INFORMATION .............................................................................. 4

CONTROLS .......................................................................................................5

CARE AND CLEANING ............................................................................................ 8

INSTALLATION INSTRUCTIONS ................................................................................. 10

TROUBLESHOOTING ........................................................................................... 14

WIFI SETUP ..................................................................................................... 15

LIMITED WARRANTY .............................................................................................16

449-5000467 Rev. 1

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

WARNING To reduce the risk of fire, electrical

shock, injury to persons, or damage when using the air

conditioner, follow basic precautions, including the

following:

• Read all of the instructions before using this appliance.

• Plug into a grounded 3 prong outlet.

• Do not remove ground prong.

• Do not use an adapter.

• Do not use an extension cord.

• Do not operate the air conditioner if it has a damaged

cord or plug, if it is not working properly, or if it has been

damaged or dropped.

• The air conditioner should be serviced only by qualified

service personnel. Call an authorized service company

for examination, repair, or adjustment.

• Disconnect power before servicing.

• Disconnect power before cleaning.

NOTE: Turning off power by pressing the Power button

does NOT disconnect the appliance from the power

supply.

• Do not install or use the air conditioner in any area where

the atmosphere contains combustible gases or where

the atmosphere is contaminated. Avoid any chemicals

coming in contact with your air conditioner.

• Do not store anything directly on top of the air

conditioner.

• Use two or more people to move and install air

conditioner.

• Never operate the air conditioner without the filters in

place.

• Do not use the air conditioner near a bathtub, shower or

wash basin or other wet area.

READ AND SAVE THESE INSTRUCTIONS

SAFETY INFORMATION

IMPORTANT SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE

49-5000467 Rev. 1 5

ENGLISH

Features and appearance will vary.

Lights next to the touch pads on the air conditioner control panel indicate the selected settings.

A. Control Panel Display

Displays the Set Temperature in degrees Fahrenheit or

degrees Celsius, or the hours remaining in a Time Delay. The

corresponding indicator light will illuminate.

B. Power Button

Turns ON/OFF power to the air conditioner.

NOTE: Turning off power by pressing the Power button does

NOT disconnect the appliance from the power supply.

• Press the Power button. The Power indicator will illuminate.

C. Mode Button

Press the Mode button to toggle among the operating

options. The corresponding indicator will illuminate:

Heat (on some models) - Heats the room to the set

temperature

Cool – Cools the room to the set temperature

DRY – Reduces the humidity in the room

Fan – Circulates the air in the room without cooling

D. Timer / Temperature Set Controls

Adjusts the Temperature or Hours in Time Delay.

To Set the Temperature:

The temperature can be set between 61ºF and 89ºF (17ºC

and 30º C) when the air conditioner is in Cool mode.

1. Press the Mode button until the Cool mode is selected.

2. Press the Up Arrow or Down Arrow buttons to select the

Temperature.

NOTE: The temperature cannot be set when the air

conditioner is in either Fan or DRY mode.

NOTE: The Up Arrow and Down Arrow buttons, when pressed

at the same time, allow you to select between displaying

the temperature in ºC or ºF. The corresponding indicator will

illuminate.

E. Fan Speed Button

The fan speed can be adjusted from Low, Medium, to High

speed when the air conditioner is in operation.

NOTE: The fan speed cannot be adjusted when the unit is in

DRY mode.

• Press the Fan Speed button to toggle among the three speeds.

The corresponding fan speed indicator will illuminate.

F. Timer Button

Program a time from (1-hour to 24-hours) for the air

conditioner to turn Off or On. When a Time Delay is

programmed, the Timer indicator light will illuminate.

While the air conditioner is operating:

1. Press the Timer button.

2. Press the Up/Down arrow buttons to select the number of

hours you want the air conditioner to continue to operate

before turning Off.

NOTE: Wait approximately 5 seconds for the Turn-Off time to

be saved.

While the air conditioner is off:

1. Press the Timer button.

2. Press the Up/Down arrow buttons to select the number

of hours you want the air conditioner to remain off before

turning On.

NOTE: Wait approximately 5 seconds for the Turn-On time to

be saved.

To cancel the timer:

• Press the Timer button once, the hours remaining will flash,

press the timer button again and the timer will be canceled.

G. WiFi Connect Pad (on some Models)

1. Connect your air conditioner to WiFi router.

2. Press and hold the timer button for 3 seconds to connect

the app or disconnect the app.

Refer to the “WiFi Set up” section for more information.

Temp / Time

HighMedLow

Cool Fan DryHeat

Temp /

Time

High

Med

Cool Fa

n Dry

Heat

Temp / Time

HighMedLow

Cool Fan DryHeat

FG (on some models)

CONTROLS

649-5000467 Rev. 1

ENGLISH

Cool Mode

Use the COOL mode for cooling.

To set the COOL mode:

1. Press the MODE pad until the COOL indicator light is lit.

2. Press the FANóäç÷òöè÷ÑÒÐÑÖÎÍÒÞÖòõÕØàéäñ

speed.

3. Press + or - to set the desired temperature between 61°F

and 89°F in 1°F increments.

After settings have been made, the display will change back

to show the room temperature.

The temperature control is used to maintain the room

temperature. The compressor will cycle on and off to keep

the room at the set level of comfort. Set the temperature

control at a lower number and the indoor air will become

cooler. Set the temperature control at a higher number

and the indoor air will become warmer. NOTE:Òé÷ëèäìõ

conditioner is off and is then turned on while set to COOL,

it will take approximately 3 minutes for the compressor to

start and cooling to begin.

Cooling Descriptions

For Normal Cooling—Select the COOL mode and HIGH,

MEDIUM, or LOW fan speed with a middle set temperature.

For Maximum Cooling—Select the COOL mode

and HIGH fan speed with a lower set temperature.

For Quieter & Nighttime Cooling—Select the COOL mode

and LOW fan speed with a middle set temperature.

×ØÝÎIf you switch from COOL or DRY mode setting to

OFF, wait 3 minutes before restarting.

DRY Mode—Dehumidification

Use the DRY mode to provide dehumidification only. The

fan will run at a fixed speed at this setting, so a fan speed

cannot be set. Keep windows and doors closed for the best

dehumidifying effects.

To set the DRY mode:

•Press the MODE pad until the DRY indicator light is lit.

Òñ÷ëèÍÛâðòçèäöè÷÷èðóèõä÷øõèúìïïñò÷åèçìöóïäüèç

Êé÷èõÍÛâðòçèëäöåèèñöè÷÷ëèçìöóïäüúìïïæëäñêèåäæî÷ò

show the room temperature.

NOTE: Òéüòøöúì÷æëéõòðäÍÛâöè÷÷ìñê÷òØÏÏòõ÷òäéäñ

setting, wait at least 3 minutes before switching back to a

ÍÛâöè÷÷ìñê

FAN Mode

Use the FAN mode to provide air circulation and filtering

without cooling.

To set the FAN mode:

• Press the FAN pad until the desired indicator light for high,

medium, or low fan speed is lit.

Since fan only settings do not provide cooling, a set

÷èðóèõä÷øõèúìïïñò÷åèçìöóïäüèçÊé÷èõÏÊ×öóèèçëäö

been set, the display will change back to show the room

temperature.

The exhaust hose and window kit do not need to be installed

when operating in fan mode.”

HEAT Mode

Use the Heat mode at Low, Med, High or Auto Fan Speed

for heating. Use the Temperature Increase (+) /Decrease (-)

pads to set the desired temperature between 61°F and 86°F

in 1°F increments.

An electronic thermostat is used to maintain the room

temperature. The heater will cycle on and off to keep the

room at the set level of comfort.

Power Outage Recovery Feature

In the case of a power outage or interruption, the unit will

automatically re-start in the settings last used after the

power is restored.

NOTE: If the TIMER was set before the power outage, it will

need to be reset after power is restored.

The display will always default to show the room temperature.

When the air conditioner is turned on, it will automatically start in the last mode and fan settings selected.

CONTROLS

49-5000467 Rev. 1 7

ENGLISH

Features and appearance may vary.

Icons on the remote control indicate the selected settings

REMOTE CONTROL

1. Insert the two batteries (provided).

2. Aim the remote control at the signal receiver on the

control panel to operate the air conditioner.

A. Power

Turns ON/OFF power to the air conditioner.

NOTE: Turning off power by pressing the Power button does

NOT disconnect the appliance from the power supply.

• Press the Power button. The Power indicator will illuminate.

B. Mode

Press the Mode button to toggle among the operating

options. The corresponding indicator will illuminate:

Heat (on some models) - Heats the room to the set

temperature

Cool – Cools the room to the set temperature

DRY – Reduces the humidity in the room

Fan – Circulates the air in the room without cooling

C. Temperature

Adjusts the Temperature or Hours in Time Delay.

To Set the Temperature:

The temperature can be set between 61ºF and 89ºF (17ºC

and 30º C) when the air conditioner is in Cool mode.

1. Press the Mode button until the Cool mode is selected.

2. Press the Up Arrow or Down Arrow buttons to select the

Temperature.

NOTE: The temperature cannot be set when the air

conditioner is in either Fan or DRY mode.

NOTE: The Up Arrow and Down Arrow buttons, when pressed

at the same time, allow you to select between displaying

the temperature in ºC or ºF. The corresponding indicator will

illuminate.

D. Fan Speed

The fan speed can be adjusted from Low, Medium, to High

speed when the air conditioner is in operation.

NOTE: The fan speed cannot be adjusted when the unit is in

DRY mode.

• Press the Fan Speed button to toggle among the three speeds.

The corresponding fan speed indicator will illuminate.

E. Timer

Program a time from (1-hour to 24-hours) for the air conditioner

to turn Off or On. When a Time Delay is programmed, the

Timer indicator light will illuminate.

F. Swing Button

The louvers on your portable air conditioner will open

automatically (do not pry them open or push them shut).

Use the Swing Button on your remote to adjust the louvers

in the position you would like them to be in, or to operate in

Swing mode the louvers will continue to move up and down.

Cool

WiFi Swing Fan Speed

Fan

Dry

Heat

CONTROLS

849-5000467 Rev. 1

ENGLISH

Air Filter

The air filters should be cleaned at least every two weeks for

your unit to operate at optimum efficiency.

CAUTION DO NOT operate the air conditioner

without a filter because dirt and lint will clog it and reduce

performance.

To remove:

1. Unplug or disconnect power.

2. Pull to remove upper filter panel.

3. Wash or vacuum the dust from the air filters.

NOTE: If washed, gently shake the filter to remove the

excess water and dust particles trapped in the filter.

4. Reinstall the filters.

5. Plug in or reconnect power.

CLEANING 1. Unplug or disconnect power.

2. Use only a soft cloth dampened with water to clean the

cabinet.

NOTE:

•Do not use a liquid or spray cleaner to clean the air

conditioner.

•DO NOT use chemicals, abrasives, ammonia, chlorine

bleach, concentrated detergents, solvents or scouring

pads. Some of these chemicals/items may damage and/or

discolor your air conditioner.

3. Dry thoroughly with a soft cloth.

4. Plug in or reconnect power.

WARNING

Electrical Shock Hazard

Disconnect power before cleaning.

Failure to do so can result in death or electrical shock.

CARE AND CLEANING

49-5000467 Rev. 1 9

ENGLISH

How to Insert the Batteries in the Remote Control

1. Remove the battery cover by sliding it according to the

arrow direction.

2. Insert new batteries, making sure that the (+) and (–) of

battery are installed correctly.

3. Reattach the cover by sliding it back into position.

NOTES:

• Use 2 “AAA” (1.5 volt) alkaline batteries. Do not use

rechargeable batteries.

• Remove the batteries from the remote control if the

system is not going to be used for a long time.

• Do not mix old and new batteries. Do not mix alkaline,

standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc)

batteries.

Storage

If the unit is not being used for a long period of time:

To Empty the Internal Water Tank:

1. Unplug or disconnect power.

2. Drain the water from the water tank. (See “Internal Water

Tank section” above.)

3. Use the original packaging to repack the unit to avoid a

buildup of dust or dirt.

4. Store the air conditioner in a cool, dry location.

Internal Water Tank

The Water Full indicator (“FL” on the control panel display)

illuminates when the internal water tank has filled with

condensed water.

To Empty the Internal Water Tank:

1. Unplug or disconnect power.

2. Place a shallow 1 quart or larger pan (not included) below

the lower drain located on the back (near the bottom) of

the air conditioner.

3. Remove the cap and the rubber plug and drain the water

tank.

4. Re-insert the drain plug and screw the cap snugly into

place.

5. Plug in or reconnect power. water plug Drain cap

CARE AND CLEANING

10 49-5000467 Rev. 1

ENGLISH

LOCATION REQUIREMENTS

• Place the air conditioner on a flat, level surface in a

location that is at least 30” (76.2 cm) from any wall.

NOTE: A minimum clearance of 30” (76.2 cm) from the

air conditioner to the wall must be maintained to ensure

proper airflow.

• Maintain a minimum 30” (76.2 cm) clearance around the

air conditioner to not block airflow.

• Keep the air conditioner free of any obstructions such as

drapes, curtains, blinds, etc.

• The exhaust hose should be free of any obstructions.

• Do not place the air conditioner on an unstable or raised

surface because it could fall and cause damage or injury.

•

Do not place the air conditioner in direct sunlight or near

a heat source such as baseboard heaters, stoves, etc.

• The window panel can be installed in a window with a

minimum 20” (55.88 cm) to a maximum 46” (121.92 cm)

opening.

Questions? visit our Website at: haierappliances.com.

BEFORE YOU BEGIN

Read these instructions completely and carefully.

• IMPORTANT — Save these instructions for local

inspector’s use.

• IMPORTANT — Observe all governing codes and

ordinances.

• Note to Installer – Be sure to leave these instructions

with the Consumer.

• Note to Consumer – Keep these instructions for future

reference.

• Skill level – Installation of this appliance requires basic

mechanical skills.

• Completion time – Approximately 1 hour

• We recommend that two people install this product.

• Proper installation is the responsibility of the installer.

• Product failure due to improper installation is not

covered under the Warranty.

• You MUST use all supplied parts and use proper

installation procedures as described in these

instructions when installing this air conditioner.

ÎÕÎÌÝÛÒÌÊÕÛÎÚÞÒÛÎÖÎ×ÝÜ

Some models require a 115/120-volt AC,

60-Hz grounded outlet protected with a 15-amp

time-delay fuse or circuit breaker.

The 3-prong grounding plug minimizes the possibility of

electric shock hazard. If the wall outlet you plan to use is

only a 2-prong outlet, it is your responsibility to have it

replaced with a properly grounded 3-prong wall outlet.

CAUTION

Do not, under any circumstances, cut or remove the third

(ground) prong from the power cord.

Do not change the plug on the power cord of this air

conditioner.

Aluminium house wiring may present special problems—

consult a qualified electrician.

Power cord includes a current

interrupter device. A test and reset

button is provided on the plug case. The

device should be tested on a periodic

åäöìöåüéìõö÷óõèööìñê÷ëèÝÎÜÝåø÷÷òñ

äñç÷ëèñ÷ëèÛÎÜÎÝåø÷÷òñúëìïè

plugged into the outlet. If the

ÝÎÜÝåø÷÷òñçòèöñò÷÷õìóòõìé÷ëè

ÛÎÜÎÝåø÷÷òñúìïïñò÷ö÷äüèñêäêèç

discontinue use of the air conditioner

and contact a qualified service

technician.

RESET

TEST

INSTALLATION INSTRUCTIONS

49-5000467 Rev. 1 11

ENGLISH























1. Control Panel

2. Louver

3. Exhaust Hose

4. Casters

5. Handle (2)

6. Grill

7. Power Cord

8. Filter

9. Air Outlet

10. Hook for Power Cord (2)

11. Water Outlet

12. Window sealing plate assembly

PARTS INCLUDED (Appearance may vary)

INSTALLATION INSTRUCTIONS

12 49-5000467 Rev. 1

ENGLISH

2. INSTALL EXHAUST HOSE

ASSEMBLY TO BACK OF UNIT

Install the exhaust hose assembly by twisting the round

adapter counterclockwise into the exhaust port on the

back of the Air Conditioner.

1. UNPACK AIR CONDITIONER

• Remove packaging materials. Save the carton and

the foam packaging for storing the air conditioner

when not in use.

NOTE: There are NO packing materials inside the air

conditioner to remove—Do Not open the cabinet.

• Properly dispose of/recycle all packing material.

• Handle the air conditioner gently.

• Keep the air conditioner upright and level. Do not

set the air conditioner on its side, front, back or

upside down.

WARNING

Excessive Weight Hazard

Use two or more people to move and install air

conditioner.

Failure to do so can result in back or other injury.

3. INSTALL WINDOW PANELS

A. Measure the window opening. For a 20”

opening, use just the middle panel of the

Window Kit with the opening for the Exhaust

Hose Adapter. For openings from 20” to 33”,

insert one side panel to the middle panel, for

openings from 33” to 46”, insert both side

panels.

B. Place the Window Kit into the window opening

(the Cam Locks should be towards you) and

slide the side panels (if being used) outward to

fill the opening. Lock the panels in place with

the Cam Locks. Apply the foam seals to the

top, bottom and ends to provide the best seal.

Slide the window shut against the Window Kit.

Indoor

Cam lock

INSTALLATION INSTRUCTIONS

49-5000467 Rev. 1 13

ENGLISH

4. CONNECT EXHAUST HOSE TO THE

WINDOW PANEL

Place the Air Conditioner close to the window ensuring

there is at least 20” of clearance from the wall and any

other obstructions. Extend the hose so that it reaches

the Window Kit. Insert the Exhaust Hose Adapter

into the opening in the Window Kit and slide it into the

locking position. Ensure that the hose runs straight to

the window with no excess extension. Important: The

Air Conditioner must be vented to the outside. Do not

use a longer hose or extend the hose included with the

Air Conditioner or the unit will not cool properly and will

overheat.

5. COMPLETE INSTALLATION

A. Plug the power cord into a grounded 3 prong

outlet.

B. Press the Reset button on the plug to ensure

the safety plug is providing power to the Air

Conditioner.

C. Allow 20” of clearance around the Air

Conditioner for proper air circulation

D. When removing the Air Conditioner, be sure to

remove the Window Kit.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove the ground prong from the power

cord plug.

Do not use an adapter.

Do not use an extension cord.

Failure to do so can result in death, fire or

electrical shock.

RESET

TEST

Vertical

Window Horizontal

Window

INSTALLATION INSTRUCTIONS

14 49-5000467 Rev. 1

ENGLISH

Problem Possible Causes Solution

Unit does not start or

operate Power supply cord is not plugged into an

outlet. Plug the power cord into a grounded 3 prong

outlet.

Power supply cord has tripped. Press and release the RESET button on the power

supply cord.

The Power button has not been pressed. Press the Power button on the Control Panel or

Remote Control to turn ON the air conditioner.

There is no power to the electrical outlet. Plug a working lamp into the outlet to check for

power.

A household fuse has blown or a circuit

breaker has tripped. Replace the fuse or reset the circuit breaker.

The control was programmed for a Time

Delay. Cancel the Time Delay. See “Control Panel.”

The batteries in the remote control are dead. Replace the batteries.

The internal water tank is full.

NOTE: The air conditioner automatically

turns off, and the Water Full indicator

illuminates to alert you of this condition.

Empty the water tank. See “Air Conditioner

Care.”

Remote control is not

working Batteries are dead. Replace the batteries.

Batteries are installed incorrectly. Make sure the batteries are inserted in the

correct position.

Air conditioner is

working but the room

is not cooling.

The room temperature is hot.

NOTE: On extremely hot and humid days,the

air conditioner will take longer to cool the

room.

Allow time for the room to cool when you first

turn on the unit.

Make sure the air conditioner has an adequate

BTU rating for the size of the room being cooled.

The control is set incorrectly to Fan or DRY

mode. Set the Mode to Cool and the Fan Speed to High.

Airflow is restricted. Remove any obstacles to the airflow and redirect

airflow for uniform cooling.

Temperature set too high. Lower the set temperature.

Air filters are dirty or restricted. Clean the air filter. See “Air Conditioner Care.”

Air conditioner installed incorrectly Check the exhaust hose and window panel for

proper installation.

Doors and windows are open. Close the doors and windows to the room being

cooled to prevent cooled air from escaping.

Error Codes

Error Codes Meaning

E1 Abnormal sense of coil pipe sensor

E2 Abnormal sense of room temperature sensor

E4 Anti-frozen protection

FL Full water

TROUBLESHOOTING TIPS

49-5000467 Rev. 1 15

ENGLISH

REGULATORY INFORMATION

FCC/IC Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/television technician

for help.

Labelling: Changes or modifications to this unit not expressly

approved by the manufacturer could void the user’s authority to

operate the equipment.

*Select Models Only

This product has WiFi capability and requires Internet connectivity

and a wireless router to enable interconnection with an Energy

Management System, and/or with other external devices, systems

or applications.

Use of the Works with Apple HomeKit™ logo means that an

electronic accessory has been designed to connect specifically to

iPod touch®, iPhone®, or iPad®, respectively, and has been certified

by the developer to meet Apple® performance standards. Apple is

not responsible for the operation of this device or its compliance

with safety and regulatory standards.

How it Works

Download the Haier Home App

Use the app to connect your room air

conditioner to WiFi Once connected, use the app to turn

down your air conditioner as you leave

work.

CHANGE TEMP

TO 65

Haier Appliances WiFi Connect (for customers in the United States)

Haier Appliances WiFi Connect Enabled*. If your Air Conditioner (AC) has a Connected Appliance Information label

located on the outside as shown below, your AC is Haier Appliances WiFi Connect Enabled. A WiFi

communication card is built

into the product allowing it to communicate with your smart phone for remote monitoring, control and notifications. Please visit

haierappliances.com/connect to learn more about connected appliance features, and to learn what connected appliance apps

will work with your smart phone.

Network: GE_MODULE_XXXX

PASSWORD: XXXXXXXX

MAC ID: XX-XX-XX-XX-XX-XX

CONTAINS FCCID: ZKJ-WCATA006 CONTAINS IC: 100229A-WCATA006

165D1656P001

WIFI SETUP (on some models)

Getting Started

To connect your room air conditioner, you’ll need the Haier

Appliances App. The app will walk you through the connection

process. Download the app from iTunes or Google Play.

All connected appliance data is held in strict accordance with

the Haier Appliances Connected Data Privacy Policy. Visit

geappliances.com/privacy/privacy_policy_connected to

view this policy.

Questions about WiFi Connect

Get answers you need about setting up WiFi appliances and

connecting to your home network in our support articles.

Visit products.geappliances.com/appliance/gea-support-

search-content to view WiFi connect room air conditioner

support articles.

16 49-5000467 Rev. 1

ENGLISH

Staple your receipt here. Proof of the original purchase date is

needed to obtain service under the warranty.

EXCLUSION OF IMPLIED WARRANTIES - Your sole and exclusive remedy is product repair as provided in this Limited

Warranty. Any implied warranties, including the implied warranties of merchantability or fitness for a particular purpose,

are limited to one year or the shortest period allowed by law.

For US Customers: This limited warranty is extended to the original purchaser and any succeeding owner for products

purchased for home use within the USA. If the product is located in an area where service by a Haier Appliances Authorized

Servicer is not available, you may be responsible for a trip charge or you may be required to bring the product to an

Authorized Haier Appliances Service location for service. In Alaska, the limited warranty excludes the cost of shipping or

service calls to your home.

Some states do not allow the exclusion or limitation of incidental or consequential damages. This limited warranty gives

you specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights

are, consult your local or state consumer affairs office or your state’s Attorney General.

Warrantor US:

GE Appliances, a Haier company

Louisville, KY 40225

• Customer instruction. This owner’s manual provides

information regarding operating instructions and user

controls.

• Improper installation. If you have an installation problem,

or if the air conditioner is of improper capacity, contact

your dealer or installer. You are responsible for providing

adequate electrical connecting facilities.

• Failure of the product resulting from modifications to the

product or due to unreasonable use including failure to

provide reasonable and necessary maintenance.

• Replacement of house fuses or resetting of circuit

breakers.

• Failure due to corrosion on models not corrosion-

protected.

• Damage to the product caused by improper power

supply voltage, accident, fire, floods or acts of God.

• Incidental or consequential damage caused by possible

defects with this air conditioner.

• Damage caused after delivery.

What Will Not Cover:

For The Period Of: Haier Appliances Will Replace:

One Year

From the date of the

original purchase

Replacement, repair, or refund of the original retail price for any product which fails due to a

defect in materials or workmanship. If the unit is exchanged, the replacement unit is warranted

for the remainder of your product’s original one-year warranty period. Haier Appliances will, at its

sole discretion, replace the product with a product of the same or comparable functionality and

quality or refund the original retail price.

• Properly pack your unit. We recommend using the original

carton and packing materials.

• Return the product to the retail location where it was

purchased.

• Include in the package a copy of the sales receipt or other

evidence of date of original purchase. Also print your name

and address and a description of the defect.

In Order to Make a Warranty Claim During the First 90 Days from the Date of Original Purchase:

• Locate your original sales receipt and make a note of your

model and serial number.

• Visit haierappliances.com to initiate the product

replacement process.

• You will be asked to provide your name, address, date of

purchase, model and serial number.

• Haier Appliances will arrange for a carton to be sent to your

home to recover the product.

• Please return all requested materials (postage pre-paid)

in the carton provided. Please include a description of the

defect.

• You should receive your replacement product or refund

within 7 to 10 business days after your package is received.

In Order to Make a Warranty Claim During the Remainder of the One-Year Warranty:

LIMITED WARRANTY

49-5000467 Rev. 1 17

FRENCH

TABLE DES MATIÈRES

CONSIGNES DE SÉCURITÉ IMPORTANTES ........................................................................ 4

COMMANDES .....................................................................................................5

ENTRETIEN ET NETTOYAGE ..................................................................................... 8

INSTRUCTIONS D’INSTALLATION ............................................................................... 10

CONSEILS DE DÉPANNAGE ..................................................................................... 14

CONFIGURATION DU WI-FI ...................................................................................... 15

GARANTIE LIMITÉE ..............................................................................................16

Nous vous remercions de votre achat de ce produit Haier. Ce manuel

d’installation vous aidera à obtenir le meilleur rendement de votre

nouvelle thermopompe.

Pour référence ultérieure, inscrivez les numéros de modèle et de série

qui figurent sur l’étiquette apposée sur le côté de votre thermopompe

avec la date de l’achat.

Brochez votre preuve d’achat à ce manuel pour faciliter le service sous

garantie le cas.

_______________________________________

Numéro de modèle

_______________________________________

Numéro de série

_______________________________________

Date de l’achat

Pour enregistrer votre nouveau système sans conduit Haier, allez sur

haierappliances.com/support/register-ductless

et saisissez les numéros de série et de modèle sur cette page. Pour

recevoir une garantie de 10 ans sur le compresseur et les pièces,

l’enregistrement est requis dans les 60 jours suivant l’installation.

CONSERVER DANS VOS DOSSIERS

18 49-5000467 Rev. 1

FRENCH

CONSIGNES DE SÉCURITÉ IMPORTANTES

INFORMATION DE SÉCURITÉ IMPORTANTES

LISEZ TOUTES LES DIRECTIVES AVANT D’UTILISER L’APPAREIL

INSTRUCTIONS DE SÉCURITÉ IMPORTANTES

WARNING Afin de réduire le risque d’incendie, de

choc électrique, de blessures corporelles ou de dommage

lors de l’utilisation du climatiseur, observez des

précautions élémentaires dont les suivantes:

• Lisez toutes les instructions avant d’utiliser cet appareil.

• Branchez l’appareil dans une prise à 3 trous avec mise à la

terre.

• Ne retirez pas la broche de mise à la terre.

• N’utilisez pas un adaptateur.

• N’utilisez pas un cordon de rallonge.

• N’utilisez pas le climatiseur si son cordon ou sa fiche sont

endommagés, s’il ne fonctionne pas correctement ou s’il

a été échappé ou endommagé autrement.

• Le climatiseur doit être réparé et entretenu par un

personnel qualifié seulement. Contactez une entreprise

en réparation autorisée pour l’inspection, la réparation ou

l’ajustement de l’appareil.

• Coupez l’alimentation électrique avant une réparation ou

un entretien.

• Coupez l’alimentation électrique avant le nettoyage.

REMARQUE : Mettre l’appareil hors tension (OFF) en

appuyant sur le bouton Power NE coupe PAS l’alimentation

électrique au climatiseur.

• N’installez pas et n’utilisez pas le climatiseur dans une

zone où l’atmosphère contient des gaz combustibles ou

est contaminée. Évitez de mettre un produit chimique en

contact avec votre climatiseur.

• Ne rangez aucune objet directement sur le dessus du

climatiseur.

• Utilisez deux personnes ou plus pour déplacer ou installer

le climatiseur.

• Ne faites pas fonctionner le climatiseur sans que le filtre

ne soit en place.

• N’utilisez pas le climatiseur près d’une baignoire, d’une

douche, d’un lavabo ou d’un autre endroit mouillé.

LIRE ET CONSERVER CES INSTRUCTIONS

49-5000467 Rev. 1 19

FRENCH

Les fonctions et l’apparence peuvent varier.

Les témoins lumineux vis-à-vis des touches sur le panneau de commande du climatiseur indiquent les réglages choisis.

Temp / Time

HighMedLow

Cool Fan DryHeat

Temp /

ime

igh

Med

Low

ool Fan Dry

Temp / Time

HighMedLow

Cool Fan DryHeat

FG (sur certains

modèles)

COMMANDES

A. Écran du panneau de commande

Affiche le réglage de la température en degrés Fahrenheit

ou les heures restantes du délai programmé avec

la minuterie. Le témoin lumineux correspondant va

s’allumer.

B. Bouton marche/arrêt (Power)

Met le climatiseur sous (ON) ou hors (OFF) tension.

REMARQUE : Mettre l’appareil hors tension (OFF) en

appuyant sur le bouton Power NE coupe PAS l’alimentation

électrique au climatiseur

• Pressez le bouton Power. Le témoin lumineux Power va

s’allumer.

C. Bouton des modes

Pressez le bouton Mode pour défiler parmi les options de

fonctionnement. Le témoin lumineux correspondant va

s’allumer :

Chauffage (Heat) (certains modèles) - Chauffe la pièce à la

température du réglage

Refroidissement (Cool) – Refroidit la pièce à la température

du réglage.

Déshumidification (Dry) – Réduit l’humidité dans la pièce.

Ventilateur (Fan) – Fait circuler l’air dans la pièce sans

refroidissement

D. Réglage de la minuterie et de la température

Règle la température, ou les heures du délai programmé

avec la minuterie.

Pour régler la température :

Vous pouvez régler la température entre 64°F et 86°F

(18°C et 30°C) lorsque le climatiseur est mode de

refroidissement.

1. Pressez le bouton Mode jusqu’à sélectionner le mode

Cool.

2. Pressez les boutons (+) ou (-) pour sélectionner la

température.

REMARQUE : Vous ne pouvez pas régler la température

lorsque le climatiseur se trouve dans le mode Fan ou Dry.

E. Bouton de vitesse du ventilateur (Fan)

Vous pouvez régler le ventilateur à basse (Low), moyenne

(Medium) ou haute (High) vitesse lorsque le climatiseur

fonctionne.

REMARQUE : Vous ne pouvez pas régler la vitesse du

ventilateur lorsque le climatiseur est dans le mode DRY.

• Pressez le bouton Fan Speed pour faire défiler les trois

vitesses du ventilateur. Le témoin lumineux de la vitesse

correspondante va s’allumer.

F. Bouton de la minuterie (Timer)

Permet de programmer un délai (de 1 à 24 heures) pour

démarrer ou arrêter le climatiseur. Lorsqu’un délai est

programmé, le témoin lumineux de la minuterie va

s’allumer.

Alors que le climatiseur fonctionne :

1. Appuyez sur le bouton Timer.

2. Pressez les boutons (+) ou (-) pour sélectionner le

nombre d’heures durant lequel le climatiseur doit

continuer à fonctionner avant de s’éteindre.

REMARQUE : Attendez environ 5 secondes pour

sauvegarder le délai.

Alors que le climatiseur est en arrêt :

1. Appuyez sur le bouton Timer.

2. Pressez les boutons (+) ou (-) pour sélectionner le

nombre d’heures durant lequel le climatiseur doit rester

en arrêt avant de se mettre en marche.

REMARQUE : Attendez environ 5 secondes pour

sauvegarder le délai.

Pour annuler la minuterie :

• Pressez le bouton Timer une fois, les heures qui restent

vont clignoter, pressez le bouton Timer de nouveau et la

minuterie sera annulée.

G. Touche de connexion Wi-Fi (certains modèles)

1. Pressez le bouton Timer durant 3 secondes pour

connecter ou déconnecter l’application.

2. Connectez votre climatiseur au routeur Wi-Fi.

Reportez-vous à la section « Configuration du Wi-Fi »

pour des précisions.

20 49-5000467 Rev. 1

FRENCH

COMMANDES

Mode de refroidissement (Cool)

Utilisez le mode COOL pour refroidir la pièce.

Pour régler le mode COOL :

1. Pressez la touche MODE jusqu’à ce que le témoin lumineux COOL

s’allume.

2. Pressez la touche FAN pour régler la vitesse du ventilateur à

HIGH, MEDIUM ou LOW.

3. Appuyez sur (+) ou (-) pour régler la température désirée entre

64°F et 86°F par sauts de 1°F.

Une fois les réglages terminés, l’écran retournera à l’affichage de la

température ambiante.

La commande de température est utilisée pour maintenir la

température ambiante. Le compresseur va s’allumer et s’éteindre

en alternance pour maintenir la pièce au niveau de confort que vous

avez réglé. Réglez la commande de température à une valeur plus

basse et l’air intérieur deviendra plus froid. Réglez la commande de

température à une valeur plus haute et l’air intérieur deviendra plus

chaud.

REMARQUE : Si le climatiseur est éteint et qu’il est allumé alors

qu’il est réglé à COOL, il faudra environ 3 minutes pour démarrer le

compresseur et le refroidissement.

Réglage du refroidissement

Pour un refroidissement normal — Sélectionnez le mode COOL et

la vitesse de ventilateur HIGH, MEDIUM ou LOW avec un réglage de

température moyen.

Pour un refroidissement maximal — Sélectionnez le mode COOL

et la vitesse de ventilateur HIGH avec un réglage de température

bas.

Pour un refroidissement plus silencieux et de nuit — Sélectionnez

le mode COOL et la vitesse de ventilateur LOW avec un réglage de

température moyen.

REMARQUE : Si vous passez du mode COOL ou DRY à la mise en

arrêt (OFF), attendez 3 minutes avant de redémarrer.

Mode DRY — Déshumidification

Utilisez le mode DRY pour la déshumidification seulement. Avec ce

mode, le ventilateur tourne à une vitesse fixe qu’il est impossible

de modifier. Gardez les fenêtres et les portes fermées pour une

déshumidification plus efficace.

Pour régler le mode DRY :

• Pressez la touche MODE jusqu’à ce que le témoin lumineux DRY

s’allume.

Dans le mode DRY, le réglage de température n’est pas affiché.

Une fois le mode DRY réglé, l’écran retournera à l’affichage de la

température ambiante.

REMARQUE : Si vous passez de DRY à OFF ou à FAN, attendez au

moins 3 minutes avant de revenir à DRY.

Mode FAN (ventilateur)

Utilisez le mode FAN pour faire circuler et filtrer l’air sans

refroidissement.

Pour régler le mode FAN :

• Pressez la touche FAN jusqu’à ce que le témoin lumineux de la

vitesse de votre choix s’allume (High, Medium ou Low).

Étant donné qu’un réglage de ventilateur seul ne génère pas de

refroidissement, le réglage de température ne sera pas affiché. Une

fois la vitesse de ventilateur réglée, l’écran retournera à l’affichage

de la température ambiante.

Il n’est pas nécessaire d’installer le tuyau d’évacuation et la trousse

de fenêtre lorsqu’on fonctionne en mode FAN.

Mode HEAT (chauffage)

Utilisez le mode Heat à la vitesse de ventilateur Low, Med, High

ou Auto pour le chauffage. Appuyez les touches (+) ou (-) pour

augmenter ou réduire la température désirée entre 64°F et 86°F par

sauts de 1°F.

Le thermostat électronique est utilisé pour maintenir la

température ambiante. L’élément chauffant va s’allumer et

s’éteindre en alternance pour maintenir la pièce au niveau de

confort que vous avez réglé.

Fonction de récupération suivant une panne de courant

En cas de panne de courant ou d’interruption, le climatiseur va

redémarrer automatiquement dans les réglages utilisés en dernier

avant le rétablissement du courant.

REMARQUE : Si la minuterie a été réglée avant la panne de courant,

elle devra être réglée de nouveau une fois le courant rétabli.

Par défaut, l’écran affiche toujours la température ambiante.

Lorsque le climatiseur est mis sous tension, il démarre automatiquement avec les derniers réglages du mode et du ventilateur.

La page charge ...

Haier QPSA13 Le manuel du propriétaire

Marque: Haier

Modèle: QPSA13

Catégorie: Climatiseurs mobiles

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Haier QPSA13 Owner's manual
español: Haier QPSA13 El manual del propietario

Haier QPSA13 Le manuel du propriétaire

Haier QPSA13 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents