Lenco DVP-125 Manuel utilisateur

Marque: Lenco

Modèle: DVP-125

Taper: Manuel utilisateur

Model: DVP-125

USER MANUAL PORTABLE DVD

GEBRUIKSHANDLEIDING DRAAGBARE DVD

BENUTZERHANDBUCH TRAGBARER DVD-PLAYER

MANUEL D’UTILISATION DVD PORTABLE

MANUAL DE USUARIO DE DVD PORTÁTIL

Index:

English................................................................................................................................................................. 3

Nederlands........................................................................................................................................................ 23

Deutsch............................................................................................................................................................. 43

Français............................................................................................................................................................. 63

Español.............................................................................................................................................................. 84

English

DVP-125

CAUTION:

Usage of controls or adjustments or performance of procedures other than those speciﬁed herein may resuln

hazardous radiaon exposure.

This unit should not be adjusted or repaired by anyone except qualiﬁed service personnel.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not use this device near water.

2. Clean only with a slightly damp cloth.

3. Do not cover or block any venlaon openings. When placing the device on a shelf, leave 5 cm (2”) free space

around the whole device.

4. Install in accordance with the supplied user manual.

5. * Don’t step on or pinch the power adaptor. Be very careful, parcularly near the plugs and the cable’s exit

point. Do not place heavy items on the power adaptor, which may damage it. Keep the enre device out of

children’s reach! When playing with the power cable, they can seriously injure themselves.

6. * Unplug this device during lightning storms or when unused for a long period.

7. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generang

products or naked ﬂame.

8. Avoid using the device near strong magnecﬁelds.

9. Electrostac discharge can disturb normal usage ohis device. If so, simply reset and restarhe device

following the instrucon manual. During ﬁletransmission, please handle with care and operate inastac-free

environment.

10. Warning! Never insert an objecnto the produchrough the vents or openings. High voltage ﬂows through the

product and inserng an object can cause electric shock and/or short circuinternal parts. For the same reason,

do not spill water or liquid on the product.

11. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

12. Do not use this device when condensaon may occur.

13. Although this device is manufactured with the utmost care and checked several mes before leaving the factory,

is sll possible that problems may occur, as with all electrical appliances. If you noce smoke, an excessive

build-up oeat or any other unexpected phenomena, you should disconneche plug from the main power

sockemmediately.

14. This device must operate on a power source as speciﬁed on the speciﬁcaon label. If you are not sure ohe

type of power supply used in your home, consult your dealer or local power company.

15. * The socket outlet must be installed near the equipment and must be easily accessible.

16. * Do not overload ac outlets or extension cords. Overloading can cause ﬁre or electric shock.

17. * Devices with class1construcon should be connected to a main socket outlet with a protecve earthed

connecon.

18. * Devices with class2construcon do not require a earthed connecon.

19. Keep away from rodents. Rodents enjoy bing on power cords.

20. * Always hold the plug when pulling it out ohe main supply socket. Do notpull the power cord. This can cause

a short circuit.

21. Avoid placing the device on any surfaces that may be subjeco vibraons or shocks.

22. To clean the device, use a sodry cloth. Do not use solvents or petrol based ﬂuids. To remove severe stains, you

may use a damp cloth with dilute detergent.

23. The supplier is not responsible for damage or lost data caused by malfuncon, misuse, modiﬁcaon ohe

device or baery replacement.

24. Do nonterruphe connecon when the device is formang or transferringﬁles. Otherwise, data may be

corrupted or lost.

25. Ihe unit has USB playback funcon, the usb memory sck should be plugged into the unit directly. Don’t use

an usb extension cable because it can cause interference resulng in failing of data.

26. The apparatus shall not be exposed to dripping or splashing and make sure that no objects ﬁlled with liquids,

such as vases, are placed on or near the apparatus.

27. * To completely disconneche power input, the mains plug ohe apparatus shall be disconnected from the

mains, as the disconnect device is the mains plug of apparatus.

28. Ihe unit works with baery, Baery shall not be exposed to excessive heat such as sunshine, ﬁre or the like.

Power supply adaptor

Manufacturer: Mass Power Electronic Limited

Model number: EFF0900150E1BA

Only use the power supply listed in the user instruc ons

29. A en n should be drawn to the environmental aspects o a ery disposal.

30. The apparatus can only be used in moderate extremely cold or climates warm environments should be avoided.

31. The ra ng label has been marked on the bo om or back panel o he apparatus.

32. This device is no ntended for use by people (including children) with physical, sensory or mental disabili es, or

a lack of experience and knowledge, unless they’re under supervision or have received instruc ns abou he

correct use o he device by the person who is responsible for their safety.

33. This producs intended for non professional use only and no or commercial or industrial use.

34. Make sure the uni s adjusted to a stable posi n. Damage caused by using this produc n an unstable posi

or by failure to follow any other warning or precau n contained within this user manual will not be covered by

warranty.

35. Never remove the casing o his apparatus.

36. Never place this apparatus on other electrical equipment.

37. Do not use or store this producn a place where i s subjec o direct sunlight, heat, excessive dust or vibra n.

38. Do not allow children access to plas c bags.

39. Only use a achments/accessories speciﬁed by the manufacturer.

40. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in

any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the

apparatus, when the apparatus has been exposed to rain or moisture, does not operate normally, or has been

dropped.

41. *Do not use a damaged power cord or plug or a loose outlet. Doing so may resul nﬁre or electric shock.

42. Prolonged exposure to loud sounds from personal music players may lead to temporary or permanent hearing

loss.

INSTALLATION

•Unpack all parts and remove protec ve material.

•*Do not connec he uni o the mains before checking the mains voltage and before all other connec ons have

been made.

*Those instruc on are related only to products using power cable or AC power adaptor.

Identification of Controls

Main Unit

1. ANGLE

2. SOURCE

3. BACKLIGHT

4. DISPLAY

5. MUTE

6. REPEAT

7. VOL+/VOL-/

8. MENU

9. SETUP

10. ZOOM

11. AUDIO

12. SUBTITLE

13.

14. ■STOP

15. ▲/▼/◄/►//

(Le/right/up/down/Fasorward/Fast reverse)

16. OK

17. OPEN

18. USB

19. CARD SLOT

20. Earphone Socket

21. AV OUT

22. AV IN

23. POWER ON/OFF

24. DC IN 9-12V

25. ANT.

26. Baery Charging Indicator

Illuminates green ﬂashing when the baery is

charging. Illuminates green when the baery is

fully charged.

27. Power Indicator

Illuminates red when the unis switched on.

Identification of Controls

Remote control unit

1. SOURCE

DVD/CARD/USB/DVB-T/AVIN.

2. MUTE

Disable Audio output.

3. 0-9 NUMBER BUTTON

Selects numbered items in a menu.

4. DISPLAY

To display the playtime and status information.

5. 10+ BUTTON

In order to select a track 10 or greater, first press 10+, For example; select track 12, first press 10+, and then

press number 2 button.

6. PBC/FAV

PBC on/off switch (VCD) in DVD mode. Open Favorite Programs List Menu in DVB mode.

7. AUDIO

Press AUDIO repeatedly during playback to hear a different audio language or audio track, if avilable.

Press AUDIO repeatedly during playback to hear a different audio channel (Left, Right, Mix,

and Stereo).

8. PLAY/PAUSE

Press PLAY/PAUSE once to pause playback, pressing PLAY/PAUSE second time will resume the playback.

9. STOP

When this button is pressed once, the unit records the stopped point, from where playback will resume if

PLAY ( ) is pressed after wards. But if STOP button is pressd again instead of PLAY ( ) button, there will

be no resume function.

10. STEP/TV/RADIO

Step the motion in DVD mode. Switch between TV and Radio source in DVB mode.

11. VOL+

Adjust volume

12. Forward Skip

Go to next chapter/track.

13. Reverse Skip

Go to previous chapter/track to the beginning.

14. BUTTON

Press BUTTON allow skipping ahead at 5-level speed (X2->X4->X8->X1 6->X32->PLAY), press PLAY

button return to normal playback.

15. button

Press BUTTON allow skipping back at 5-level speed (X2->X4->X8->X16->X32->PLAY), press PLAY button

return to normal playback.

16.

Turn on/off the power.

17. SEARCH

Go to time point, title or chapter you want in DVD Mode.

18. SUBTITLE

Press SUBTITLE repeatedly during playback to hear a different subtitle languages.

19. ANGLE

Press ANGLE will change the view angle, on DVDs that support this feature.

20. TITLE

Return to DVD title menu

21. OK

Confirms menu selection..

22. REPEAT

Press REPEAT during playback to select a desired repeat mode.

: You can play select repeat chapter/title/off.

: You can select repeat single/all/off.

: You can select repeat single/folder/off.

23. VOL-

Adjust volume

24. SETUP

Accesses or removes setup menu.

25. SLOW

Press Slow button repeatedly to enter slow playback, and cycle between different speeds.

The speeds are 1/2, 1/4, 1/8, 1/16, and normal.

26. PROGRAM

: The program function enables you to store your favourite tracks from the disc.

Press PROGRAM button, then PROGRAM MENU will appear on screen, now you can use the number key to

direct input the titles, chapters or tracks number and select PLAY option.

TO resume normal playback, press PROGRAM and select clear program option on the program menu, press

PROGRAM again to exit program menu.

27. ZOOM

: Use ZOOM to enlarge or shrink the video image.

1. Press ZOOM during playback or still playback to activate the Zoom function. The square frame appears

briefly in the right bottom of the picture.

2. Each press of the ZOOM button changes the TV screen in the following sequence:

2X size → 3X size → 4X size → 1/2 size → 1/3 size → 1/4 size → normal size

: Use ZOOM to enlarge or shrink the picture.

1. Press 'ZOOM'.

2. Used " " to enlarge, or " " to shorten the picture. Use the ▲ ▼ ◄ ► button to move through the

zoomed picture.

28. RED/GREEN/YELLOW/BLUE KEY

Some specific functions in DVB mode.

SETUP Menu Setting

General Setup Page

Press SETUP button to get the setup menu. Use direction buttons ▲ ▼ ◄ ► to select the preferred item.

After finishing settings, press SETUP again to normal display.

The following menu items can be changed:

GENERAL: selects the GENERAL PAGE menu.

AUDIO: selects the AUDIO PAGE menu.

VIDEO: selects the VIDEO PAGE menu.

PREFERENCE: selects the PREFERENCE PAGE menu.

General Setup Page

TV DISPLAY: selects the aspect ra o o he playback picture.

4:3 PANSCAN: if you have a normal TV and want both sides o he picture to be trimmed or forma d to ﬁt

your TV screen.

4:3 LETTERBOX: if you have a normal TV. In this case, a wide picture with black bands on the upper and

lower por ons o he TV screen will be displayed. 16:9: wide screen display.

Wide Squeeze: Set screen mode to 4:3.

Angle Mark

Displays current angle se ng informa on on the right hand corner o he TFT screen if available on the disc.

OSD Language

You can select your own preferred language se ngs.

Closed Cap ons

Closed cap ons are data that are hidden in the video signal of some discs. Before you selec his func on,

please ensure tha he disc contains closed cap ons informa on and your TV set also has this func on.

Screen Saver

Last Memory

This func on is used to turn the screen saver On or Oﬀ.

Auto Standby

If this funcon is switched to ON, the DVD will resume play on the last known posion, when the unit was

stopped, powered down or dvd was reinserted.

standby mode a r 3 hours i here is no interac on from user within this period o ime. 4 HOURS: the unit

will turn to standby mode a r 4 hours i here is no interac on from user within this period o ime. OFF:

the auto standby func on is disabled, and unit will stay in “on” mode even if no interac on from user.

AUTO STANDBY

Last Memory ON

OFF

3 HOUR

4 HOUR

Audio Setup Page

Downmix

This options allows you to set the stereo analog output of your DVD Player.

LT/RT: Select this option if your DVD Player is connected to a Dolby Pro Logic decoder.

Stereo: Select this option when output delivers sound from only the two front speakers.

Dolby digital

The options included in Dolby Digital Setup are: 'Dual Mono' and 'Dynamic'.

Dual Mono

Stereo: Left mono sound will send output signals to Left speaker and Right mono sound will send output

signals to Right speaker.

L-Mono: Left mono sound will send output signals to Left speaker and Right speaker.

R-Mono: Right mono sound will send output signals to Left speaker and Right speaker.

Mix-Mono: Left and Right mixed mono sound will send output signals to Left and Right speakers.

Dynamic

Dynamic range compression.

Video Setup Page

Brightness, Contrast, Hue, Saturation: setting the video quality.

Preference Page

TV Type

Selecting the colour system that corresponds to your TV when AV outputs. This DVD Player is compatible

with both NTSC and PAL.

Preference Page

PAL - Select this if the connected TV is PAL system. lt will change the video signal of a NTSC disc and output

in PAL format.

NTSC - Select this if the connected TV is NTSC system. lt will change the video signal of a PAL disc and output

in NTSC format.

Auto: Chang the video signal output automatic according to the playing disk format.

Audio: Selects a language for audio (if available).

Subtitle: Selects a language for subtitle (if available).

Disc Menu: Selects a language for disc menu (if available).

Default: Back to the factory setting.

Parameters and specifications

Electronical parameters

Item

Standard requirement

Power requirements

AC 100-240 V, 50/60 Hz

Power consumption

<12W

Operating humidity

5% to 90%

Output

VIDEO OUT

AUDIO OUT

1.4 Vrms (1 KHz, 0 dB)

Audio

Speakers WX2, Headphones output

System

Laser

Semiconductor laser, wavelength 650 nm

Signal system

NTSC/PAL

Frequency response

20Hz to 20 kHz (3dB)

Signal-to-noise ratio

More than 80 dB (ANALOG OUT connectors only)

Dynamic range

More than 85 dB (DVD/CD)

Note: Design and specifications are subject to change prior notice.

Battery Parameters

Battery Specifications:

Output: 7.4V

Charge/Discharge Time:

Standard charge time: 3h ~ 4h

Storage and work circumstances:

1. Storage circumstances

Temperature

Humidity

6 months

-20°C ~ +45°C

65±20%

1 week

-20°C ~ +65°C

65±20%

2. Work circumstances

Temperature

Humidity

Standard charge

0°C ~ +45°C

65±20%

Standard discharge

-20°C ~ +65°C

65±20%

First Time Installation

After all connections have been made properly, switch on TV and make sure the receiver is connected to the

Main Power. Press Power Button to switch receiver on. If you are using the receiver for the first time or

restored to Factory Default, the Main Menu will appear on your TV screen.

(1) Select [OSD Language] and press RIGHT/LEFT key to select a language.

(2) Select [Country] and press RIGHT/LEFT key to select your country of residence.

(3) Select [Channel Search] and press RIGHT or OK key to begin Automatic channel search.

(4) Once channel tuning is complete, you are now ready to watch TV.

Basic Operation

Program Manage Settings

To access the Menu, press the SETUP button and select [Program], The Menu provides options to adjust the

Program Manage Settings.

Select an option and press OK or RIGHT to adjust that setting. Press the EXIT button to exit the Menu.

Program Edit

To edit your program preferences (lock, skip, favourite,

move or delete), you will need to enter the Program Edit

Menu. This Menu requires a password to access. Enter the

default password '000000'.

First Time Installation

Set Favourite Program/s

You can create a shortlist of favourite programs that you can easily access. Set Favourite TV or Radio

program:

1. Select the preferred program then press the FAVOURITE button. A heart-shaped symbol will appear and

the program is marked as a favourite.

2. Repeat the previous step to select more Favourite programs.

3. To confirm and exit the Menu, press the EXIT key.

Disable Favourite TV or Radio Program:

Press the FAV button on the Remote Control with the heart-shaped symbol.

View Favourite Programs:

1. Press the Fav button and the Favourite Menu will appear.

2. Press UP/DOWN to select your Favourite Programs.

3. Press OK to select your favourite program.

Delete a TV or Radio Program/s

1. Select the Program and then press the BLUE button A message will appear. Press OK to delete the

program.

2. Repeat the previous step to select more programs to delete.

Skip TV or Radio Program/s

1. Select the program you would like to skip and press the GREEN button A skip symbol is displayed.

The program is marked as a skip.

2. Repeat the previous step to select more programs.

3. To confirm and exit the menu, press EXIT key.

Disable a skip TV or Radio Program:

Press the GREEN button on the skip program with the skip symbol.

Move a TV or Radio Program/s

1. Select the preferred program then press the RED button. A move symbol will appear.

2. Press UP/DOWN to move the program.

3. Press OK to confirm.

4. Repeat the above steps to move more channels.

Lock Program/s

You can lock selected programs for restricted view. Lock a TV or Radio Program:

1. Select the preferred program then press the YELLOW button. A lock-shaped symbol is displayed.

The program is now marked as locked.

2. Repeat the previous step to select more programs.

3. To confirm and exit the menu, press the EXIT button.

4. Press the YELLOW button to disable the locked program.

5. To view the locked program, you will be required to enter either the default.

First Time Installation

Sort

Sort your channels from the following options:

[LCN] - Sort the channels in ascending order.

[Name] - Sort the channels in alphabetical order.

[Service ID] - Sort the channels according to the station.

LCN (Logical channel number)

Set LCN on or off.

Video Setting

To access the Menu, press SETUP then select [Picture]. The Menu provides options to adjust the video

settings. Press UP/DOWN to select an option and press RIGHT/LEFT to adjust that setting. Press EXIT to exit

the menu.

Aspect Ratio

You must set the display format to either 4:3 PanScan, 4:3 Letter Box, 4:3 Full, 16:9 Wide Screen, 16:9

PillarBox or Auto to get the maximum display when watching TV.

First Time Installation

TV format

If the video does not appear correctly, you need to change the settings. This should match the most

common setting for TVs in your country.

[NTSC]: for NTSC system TV.

[PAL]: for PAL system TV.

Channel Search

To access the menu, press SETUP and select [Search Channel], The Menu provides options to adjust the

Search Channel settings. Select an option and press RIGHT/LEFT to adjust the settings.

Press EXIT to exit the Menu.

Auto Search

Search and install all channels automatically. This option overwrites all preset channels.

1. Select [Auto Search] and press OK or RIGHT to start channel search

2. To cancel channel search, press EXIT.

Manual Search

Install new channels manually. This option adds new channels without changing the current channels list.

1. Select [Manual Search] then press OK or RIGHT. The channel search screen will appear.

First Time Installation

2. Press the RIGHT/LEFT key to select the channel frequency.

3. Press OK to start searching channels. If a channel is found, it is saved and added to the channels list. If

channels can’t be found, then exit the menu.

Country

Select your country of residence.

Time Setting

To access the Menu, press SETUP then select [Time]. The Menu provides options to adjust the time settings.

Press UP/DOWN to select an option and press RIGHT/LEFT to adjust the settings.

Press EXIT to exit the menu.

Time offset

Select auto or manual for GMT offset adjustments.

Country Region

Select the Country Region when [Time Offset] is set to Auto.

Time Zone

Select the Time Zone Offset when [Time Offset] is set to Manual.

First Time Installation

Option

To access the Menu, press SETUP and select [Option]. The menu provides options to adjust the OSD

Language,

Subtitle Language and Audio Language. Select an option and press RIGHT/LEFT to adjust the setting.

Press EXIT to exit The Menu.

OSD Language

Select an OSD language.

Audio Language

Select the preferred audio language for watching TV channels. lf the language is not available, the default

program language will be used.

Subtitle Language

Select the preferred subtitle language.

System Setting

To access the Menu, press SETUP and select [System].The menu. Provides options to adjust the system

settings. Press the UP/DOWN key to select an option and press RIGHT/LEFT to adjust the setting. Press EXIT

to exit the Menu.

Parental Guidance

You can restrict access to channels that are unsuitable for children. To restrict/lock the channel you will

need to enter either the default password '000000' or your own password.

First Time Installation

Set Password

Set or change the password for Locked programs. Enter your old Password or the default password '000000'.

You will then be asked to enter your new password. To confirm re-enter your new password.

Once it is confirmed, press EXIT to exit the Menu.

Restore Factory Default

Reset your Set Top Box to the Default Factory Settings. In Main Menu select [Restore Factory Default] and

press OK or RIGHT to select. Enter your password or the default password '000000' and press OK to confirm.

This option will delete all preset channels and settings.

Information

View model, hardware and software information.

Software update

After selected, it will begin searching for new software from USB device.

USB

To access the Menu, press the SETUP button and select USB

Multi-Media

Switch to USB mode and plug in USB to view files.

Photo Configure

Set the parameters for viewing photographs.

Movie Configure

Set the parameters for displaying movie subtitles.

La page charge ...

Lenco DVP-125 Manuel utilisateur

Marque: Lenco

Modèle: DVP-125

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

español: Lenco DVP-125 Manual de usuario
Deutsch: Lenco DVP-125 Benutzerhandbuch
Nederlands: Lenco DVP-125 Handleiding

Lenco DVP-125 Manuel utilisateur

Lenco DVP-125 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents