Wyze WLPPO1 Manuel utilisateur

WLPPO1
Wyze
Marque
Wyze
Modèle
WLPPO1
Taper
Manuel utilisateur
Wyze Labs, Inc.
Wyze Labs. Inc. 3933 Lake Washington Blvd NE, Suite 350
Kirkland, WA 98033
1
Instruction Manual for WLPPO1.
Item No.
TYPE
PHOTO
DESCRIPTION
WLPPO1
WiFi Outdoor Plug
Input: 120V~,60Hz
Output:
Max.15A Resistive Load
Max. 1000W Tungsten Lamp
Max. 1/2 HP
Rainproof
Operation Temperature:
-4°F~120°F (-20°C~50°C)
FCC ID: 2AUIUWLPPO1
IC: 25466-WLPPO1
AC Adaptor
Input: 120V~，60Hz
2 outlets Output: Maximum 1875W for Resistive load
1) Download apps:
IOS version please search and download Wyze app at app-store, Android version please search and download
Wyze app from Google Play. Or you may also scan below QR code to download.
2) Operation
plug-in adaptor into wall outlet or movable socket-outlets, Press can cause it to sink into the tabletop.
3) Operation
3.1) Operation on/off by manual
- Press push- button ON to switch on if current mode is OFF.
Wyze Labs, Inc.
Wyze Labs. Inc. 3933 Lake Washington Blvd NE, Suite 350
Kirkland, WA 98033
2
- Press push-button OFF to switch off if current mode is ON
3.2) Operation on/off by Apps Pairing
a) Please hold press button more than 5 seconds till red indicator lighting flash quickly.,then release the button, you
could add your electronic device into your APP now. Please reference the “QUICK START GUIDE” to learn details.
b) The blue indicator light, pairing is succeed, then could control your device via APPS.
c) When the red light is not lit or the blue light is not flashing, hold press button more than 10 seconds, the blue
indicator will flash quickly, then release the button, red indicator flash quickly, means reset succeed, then you
could pairing again.
3.3) Indicator status of Gateway
4) Fault finding
a）No activation:
- Check setting program successful
- Check wifi router connection
b）No response
- -Check if the socket has electricity, try changing it to another place
- -Try changing a device
5) Important Notes
a) DO NOT OVERLOAD.
b) To install the product needed by a qualified electrician.
6) Direction!
- Installation must be done by people having knowledge and experience in electrical connections
- Improper installation can cause danger for your own life the life of everyone using the electrial appliance
- Improper installation can cause damage of property e.g. fire
- You are personally liable for damage of property or humans
LED
Indicator
Colour
indicator status
1
No flash
3
Keep lighting
Flash slowly
Flash quickly
A
blue
Failed to connect to
network
Press and hold for 3 seconds to
enter the distribution network
After pressing the butoon for 10
seconds ,enter reset ststus
Connect to network
success
B
White
Power off
Power on
Wyze Labs, Inc.
Wyze Labs. Inc. 3933 Lake Washington Blvd NE, Suite 350
Kirkland, WA 98033
3
7) Warning!
For your safety, please read the following cautions before installing or using your device.
- Do not open the device or attempt to repair or service it.
- Use the device in a dry location, and avoid placing it in a humid environment.
- Do not submerge the device in liquid or attempt to clean it with liquids or solvents. To clean the device, disconnect
it from the power outlet and use a damp towel.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
CAUTION: Please note that changes or modifications of this product is not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the
device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation,
Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
1) L’appareil ne doit pas produire de brouillage;
2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Wyze Labs, Inc.
Wyze Labs. Inc. 3933 Lake Washington Blvd NE, Suite 350
Kirkland, WA 98033
4
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Wyze WLPPO1 Manuel utilisateur

WLPPO1
Wyze
Marque
Wyze
Modèle
WLPPO1
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents