Watchguard AP130 Mode d'emploi

Marque: Watchguard

Modèle: AP130

Catégorie: Antennes réseau

Taper: Mode d'emploi

WatchGuard

AP130

Hardware Guide

AP130

Access Point

WatchGuard Technologies, Inc. 2

About This Guide

Information in this guide is subject to change without notice. Companies, names, and data used in

examples herein are fictitious unless otherwise noted. No part of this guide may be reproduced or

transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express

written permission of WatchGuard Technologies, Inc.

Guide revised: 1/10/2021

mentioned herein, if any, are the property of their respective owners.

Complete copyright, trademark, patent, and licensing information can be found in the Copyright and

Licensing Guide, available online at https://www.watchguard.com/wgrd-help/documentation/overview.

About WatchGuard

WatchGuard® Technologies, Inc. is a global leader in network

security, providing best-in-class Unified Threat Management, Next

Generation Firewall, secure Wi-Fi, and network intelligence

products and services to more than 75,000 customers worldwide.

The company’s mission is to make enterprise-grade security

accessible to companies of all types and sizes through simplicity,

making WatchGuard an ideal solution for Distributed Enterprises

and SMBs. WatchGuard is headquartered in Seattle, Washington,

with offices throughout North America, Europe, Asia Pacific, and

Latin America. To learn more, visit WatchGuard.com.

For additional information, promotions and updates, follow

WatchGuard on Twitter, @WatchGuard on Facebook, or on the

LinkedIn Company page. Also, visit our InfoSec blog, Secplicity,

for real-time information about the latest threats and how to cope

with them at www.secplicity.org.

Address

505 Fifth Avenue South

Suite 500

Seattle, WA 98104

Support

www.watchguard.com/support

U.S. and Canada +877.232.3531

All Other Countries +1.206.521.3575

Sales

U.S. and Canada +1.800.734.9905

All Other Countries +1.206.613.0895

WatchGuard Technologies, Inc. i

Contents

WatchGuard AP130 Hardware Guide 1

AP Management 1

About Your Hardware 2

Hardware Specifications 2

Environmental Requirements 3

Hardware Description 4

Bottom Panel Connections 4

Side Panel Connections 5

Device Indicator 5

Mount and Connect the AP 6

Ceiling Mount 7

Wall Mount 8

Wall Mount with T-Rail Mount and Spacers 9

Connect the AP 10

Power Adapter (Optional) 11

Ethernet Power Injector (Optional) 12

Notices 14

Safety Warning 14

Power Adapter Requirements 14

FCC Certification 14

CENotice 15

Industry Canada Certification 15

EUDeclaration of Conformity 17

Brazil ANATEL 19

Mexico NOM 19

Japan Statement 19

ii WatchGuard Technologies, Inc.

Japan VCCIClass B Statement 19

Taiwan NCCStatement 19

RoHS Statement 19

WEEE Statement 20

REACH Certificate of Compliance 20

WatchGuard AP330 Hardware Guide 1

AP Management 1

About Your Hardware 2

Hardware Specifications 2

Environmental Requirements 3

Hardware Description 4

Bottom Panel Connections 4

Side Panel Connections 5

Device Indicator 5

Mount and Connect the AP 6

Ceiling Mount 7

Wall Mount 8

Wall Mount with T-Rail Mount and Spacers 9

Connect the AP 10

Power Adapter (Optional) 11

Ethernet Power Injector (Optional) 12

Notices 14

Safety Warning 14

Power Adapter Requirements 14

FCC Certification 14

CENotice 15

Industry Canada Certification 15

EUDeclaration of Conformity 17

WatchGuard Technologies, Inc. iii

Brazil ANATEL 19

Mexico NOM 19

Japan Statement 19

Japan VCCIClass B Statement 19

Taiwan NCCStatement 19

RoHS Statement 19

WEEE Statement 20

REACH Certificate of Compliance 20

iv WatchGuard Technologies, Inc.

WatchGuard AP130 Hardware Guide

The WatchGuard AP130 is a 2x2 802.11ax dual radio access point that supports 802.11ax/ac/a/b/g/n

wireless standards with up to 574 Mbps data rate on 2.4GHz band and 1200 Mbps on 5GHz bands.

AP Management

You can manage your AP130 with WatchGuard Cloud, a powerful cloud-based enterprise wireless

management solution for AP configuration, security, and monitoring.

For more information on how to set up your AP with WatchGuard Cloud, see watchguard.com/start.

WatchGuard Technologies, Inc. 1

About Your Hardware

Hardware Specifications

Hardware Description

Chipset Qualcomm QCA8072 1 Gbps

Processor and RAM nQualcomm Cypress IPQ6010-0 Cypress Quad-core A53 at

1.6GHz

n1024 MB DDR3L (512 x 2)

Radio Model nRadio 1:2.4GHz Qualcomm Colbalt QCN5021 2x2 with

internal PA

nRadio 2: 5GHz Qualcomm Colbalt QCN5052 2x2

Radio Type and Frequency Band nRadio 1: 2.4 GHz 2x2 11b/g/n/ax

nRadio 2: 5 GHz 2x2 11a/n/ac/ax

Antennas n2 x 3dBi 2.4 GHz internal antennas

(Maximum Antenna Gain: 3.46dBi)

n2 x 3dBi 5 GHz internal antennas

(Maximum Antenna Gain: 4.85dBi)

Ethernet Interfaces n1 GbE Ethernet port

Power Interface nPoE 48-57V DC 802.3at

n12V / 2A DC in

Power Consumption Maximum:12.5W

MTBF

(Mean Time Between Failures)

25,000 hours at 25˚C / 77˚F

Dimensions 160 mm X 160 mm X 33.2 mm (6.3” x 6.3” x 1.3”)

Weight 0.380 kg (1 lb)

WatchGuard AP130 Hardware Guide

2 WatchGuard Technologies, Inc.

WatchGuard AP130 Hardware Guide

Environmental Requirements

To safely install your WatchGuard AP, we recommend that you:

nInstall the device indoors

nMake sure the device has adequate clearance for air flow and cooling

Other environmental requirements:

Operating Temperature 0°C to 40°C (32°F to 104°F)

Operating Humidity 5% to 95% non-condensing

Non-operating Temperature -20°C to 65°C (-4°F to 149°F)

Non-operating Humidity 5% to 95%, non-condensing

WatchGuard Technologies, Inc. 3

Hardware Description

The AP has these connections on the bottom panel of the AP.

Bottom Panel Connections

Reset Button

Resets the AP to factory-default settings.

nUse a paper clip or other small object to press the reset button through the hole.

nPress and hold the reset button for up to 10 seconds until all LEDs go off to indicate that the AP

has rebooted.

LAN/POE

This is an LAN port that connects the AP to a wired LAN connection through a switch or hub. This

port also provides PoE (802.3af/at) power for the AP.

DC 12V

If PoE power is unavailable, you can power the device with the optional 12V DCpower adapter

(WG9009).

WatchGuard AP130 Hardware Guide

4 WatchGuard Technologies, Inc.

WatchGuard AP130 Hardware Guide

Side Panel Connections

Kensington Lock Slot

Kensington security lock slot for use with a security cable to secure your device.

Device Indicator

The AP130 has a single LED indicator that can show these conditions:

LEDColor Status

Solid red AP is booting

(Solid orange indicates a hardware issue)

Flashing red AP cannot connect to WatchGuard Cloud

Solid blue AP is online

Flashing blue Flash LED action from WatchGuard Cloud

WatchGuard Technologies, Inc. 5

Mount and Connect the AP

Your package includes the AP130, ceiling mount t-rail brackets, and wall mount screws and spacers.

The MAC address and serial number of your AP are printed on a label on the back of the

device. Make sure you record this information before you mount the AP.

WatchGuard AP130 Hardware Guide

6 WatchGuard Technologies, Inc.

WatchGuard AP130 Hardware Guide

Ceiling Mount

1. Slide the ceiling mount base into the slot on the back panel of the access point.

2. Hold the access point with one hand to reach the other hand over the t-rail sides of the bracket.

3. Attach the stationary end of the ceiling mount bracket on to the t-rail.

WatchGuard Technologies, Inc. 7

Wall Mount

1. Determine where the access point will be placed and mark the location for the two mounting holes

(98.14 mm apart).

2. Drill the two mounting holes (8.1mm diameter and 26mm depth) and hammer the anchors into the

holes.

3. Screw the anchors into the holes until they are flush with the wall, then screw the included screws into

the anchors.

4. Attach the access point to the wall with the mounting screws.

WatchGuard AP130 Hardware Guide

8 WatchGuard Technologies, Inc.

WatchGuard AP130 Hardware Guide

Wall Mount with T-Rail Mount and Spacers

For ease of use, you can also affix the access point to a wall with the T-rail 15/16" mount attached. Use the

included spacers to place between the mounting screws and the anchors.

WatchGuard Technologies, Inc. 9

Connect the AP

Plug one end of the Ethernet cable from your network into the LAN PoE port on the bottom panel of the AP.

Make sure the other end of the Ethernet cable is connected to your network through a hub, switch, or

injector with PoE (802.3af/at) power enabled.

WatchGuard AP130 Hardware Guide

10 WatchGuard Technologies, Inc.

WatchGuard AP130 Hardware Guide

Power Adapter (Optional)

An optional AC power adapter supplies 12V DC power to the AP.

AC Power Adapter Specs

WatchGuard Part Number WG9009

AC Input Voltage Rating 100-240V, 50-60Hz

Output Voltage DC 12V, 2.5A

Region Specific Adapter Plugs US, UK, AU/NZ, EMEA (all included)

Temperature Operating: 0 - 40°C (32 – 104°F)

Storage: -20 - 85°C (-4 – 185°F)

Humidity Operating: 5% – 95%

Storage: 0% – 95%

Dimensions 69 mm x 32.6 mm x 49.5 mm (2.7" x 1.28" x 1.5")

WatchGuard Technologies, Inc. 11

Ethernet Power Injector (Optional)

You can power the AP with an optional Ethernet Power Injector. The PoE+ power injector enables you to

power the AP through an existing Ethernet connection. With this device, you do not have to position your

AP near a power outlet.

This device complies with IEEE 802.3at/af PoE specifications. Do not use any PoE

adapters that are not IEEE 802.3at/af compliant as they may damage your device.

To connect an Ethernet Power Injector to the WatchGuard AP:

1. Plug the Ethernet Power Injector into an AC power source.

2. Connect an Ethernet cable from your network backbone (for example, a PoE-capable router, switch, or

hub) to the LAN connector on the Ethernet Power Injector.

3. Connect an Ethernet cable from the LAN1 PoE Ethernet interface on the AP to the PoE connector on

the Ethernet Power Injector.

The table provides the specifications for the power adapter.

Ethernet Power Injector Specs

WatchGuard Part Number 802.3at PoE+ Injector with AC cord (US/FCC) (WG8599)

802.3at PoE+ Injector with AC cord (CE) (WG8600)

802.3at PoE+ Injector with AC cord (UK) (WG8601)

802.3at PoE+ Injector with AC cord (AUS) (WG8602)

Specification IEEE 802.3at/af

AC Input Voltage Rating 100-240VAC

Input Current 0.8A max for 100VAC

WatchGuard AP130 Hardware Guide

12 WatchGuard Technologies, Inc.

WatchGuard AP130 Hardware Guide

Ethernet Power Injector Specs

Output Power 30W maximum

Ethernet Interfaces LAN: RJ-45 for 10/100/1000 Mbps data

POE: RJ-45 for 10/100/1000 Mbps data and power

Voltage: Pin4, 5:54V, Pin7, 8:Return

Indicator Power: Green

Temperature Operating: 0 - 40°C (32 - 104°F)

Storage: -30 - 80°C (-22 - 176°F)

Humidity 5% - 90% (Operating and storage)

Dimensions L = 99 mm (3.9")

W = 68.5 mm (2.27")

H = 33 mm(1.3")

Weight 149.6 g (0.33 lbs)

WatchGuard Technologies, Inc. 13

Notices

All WatchGuard products are designed and tested to meet strict safety requirements. These requirements

include product safety approvals and other global compliance standards. Please read these instructions

carefully before operating the product, and refer to them as needed to ensure the continued safe operation of

your product.

For patent information, please visit http://www.watchguard.com/patents

Safety Warning

If protective earthing is used as a safeguard, the instructions shall require connection of the equipment

protective earthing conductor to the installation protective earthing conductor (for example, by means of a

power cord connected to a socket-outlet with earthing connection). To meet safety and electromagnetic

interference (EMI) requirements, you must make sure the power source is connected to earth ground before

you connect power to the AP.

Power Adapter Requirements

This product is intended to be supplied by a Listed Power Adapter or DC power source marked “L.P.S.” (or

Limited Power Source or PS2) rated 12V DC, 2A minimum, maximum ambient temperature (Tma)=40°C, or

supplied by a Listed PoE Adapter marked “L.P.S.” (or Limited Power Source or PS2) rated 54V DC, 0.6A

minimum, maximum ambient temperature (Tma)=40°C. For more information regarding approved power

sources, please contact WatchGuard Technologies.

FCC Certification

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

nReorient or relocate the receiving antenna.

nIncrease the separation between the equipment and receiver.

nConnect the equipment into an outlet on a circuit different from that to which the receiver is

nconnected.

nConsult the dealer or an experienced radio/TV technician for help.

WatchGuard AP130 Hardware Guide

14 WatchGuard Technologies, Inc.

La page charge ...

Watchguard AP130 Mode d'emploi

Marque: Watchguard

Modèle: AP130

Catégorie: Antennes réseau

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Watchguard AP130 User guide

Watchguard AP130 Mode d'emploi

Watchguard AP130 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents