Sharp LL-T1820-B Manuel utilisateur

LCD MONITOR

LCD FARBMONITOR

MONITEUR LCD

MONITOR LCD

LL-T1820-H

LL-T1820-B

OPERATION MANUAL

BEDIENUNGSANLEITUNG

MODE D’EMPLOI

MANUALE D’USO

MANUAL DE FUNCIONAMIENTO

Table of Contents / Inhaltsverzeichnis / Table des matières / Indice / Índice

English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

2

3

English

Table of Contents

Notice for Users in the USA ............................................................................................................................ 4

TCO '95/ '99 ..................................................................................................................................................... 5

Notice for Users in Europe............................................................................................................................... 7

Notice for Users in the UK ............................................................................................................................... 8

Notice for Users in Australia ............................................................................................................................ 8

Tips and safety precautions ............................................................................................................................ 9

Product description .........................................................................................................................................10

Height adjustment, angle adjustment, rotation (long height/width) ..................................................................11

Connecting the monitor and turning the monitor on and off ..............................................................................12

Connecting the monitor to a computer ........................................................................................................13

Connecting the monitor to a power source..................................................................................................14

Connecting a USB device ..........................................................................................................................14

Turning the power on ..................................................................................................................................15

Changing between input terminals ..............................................................................................................15

Turning the power off ..................................................................................................................................16

Adjusting the screen display ...........................................................................................................................17

Adjustment value reset ..............................................................................................................................17

Adjustment lock function............................................................................................................................17

Adjusting the backlight ...............................................................................................................................17

Adjusting the screen display (With analog connection) ...................................................................................18

Automatic screen adjustment.....................................................................................................................18

Manual screen adjustment .........................................................................................................................19

Adjusting the screen display (With digital connection) ....................................................................................22

Monitor care and repair ...................................................................................................................................24

Monitor care ...............................................................................................................................................24

Storage ......................................................................................................................................................24

Troubleshooting ..........................................................................................................................................24

Specifications .................................................................................................................................................25

Installing set-up information and the ICC profile (For Windows) ......................................................................28

Information about the ColorSync profile (For MacOS).....................................................................................31

Instructions for attaching a VESA compliant arm ...........................................................................................32

Information about the Pivot Software (Long height/width display) ..................................................................33

4

Notice for Users in the USA

FCC Statement

WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment

not expressly approved by the manufacturer could void the user's authority to operate this equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equip-

ment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the distance between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Use nothing but the included cables and AC cord to insure compliance with FCC regulation for Class B

computing equipment.

Declaration of Conformity

SHARP LCD Color Monitor LL-T1820-H/LL-T1820-B

This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: (1)

this device may not cause harmful interference, and (2) this device must accept any interference re-

ceived, including interference that may cause undersized operation.

Responsible Party : SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430

TEL :1-800-BE-SHARP

* As an ENERGY STAR Partner, SHARP has determined that this product meets the ENERGY STAR

guidelines for energy efficiency.

This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal

of these materials may be regulated due to environmental considerations. For disposal or recycling

information, please contact your local authorities or the Electronics Industries Alliance:www.eiae.org

5

English

Congratulations!

You have just purchased a TCO’95 or TCO’99 approved and labelled product! Your choice has provided you

with a product developed for professional use. Your purchase has also contributed to reducing the burden on

the environment and also to the further development of environmentally adapted electronics products.

This product meets the requirements for the TCO’95 or TCO’99 scheme which provides for an international

environmental and quality labelling of personal computers. The labelling scheme was developed as a joint

effort by the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen

(The Swedish Society for Nature Conservation), Statens Energimyndighet (The Swedish National Energy

Administration) and SEMKO AB.

The requirements cover a wide range of issues: environment, ergonomics, usability, reduction of electric and

magnetic fields, energy consumption and electrical safety.

Why do we have environmentally labelled computers?

In many countries, environmental labelling has become an established method for encouraging the adaptation

of goods and services to the environment. The main problem, as far as computers and other electronics

equipment are concerned, is that environmentally harmful substances are used both in the products and during

their manufacture. Since it is not so far possible to satisfactorily recycle the majority of electronics equipment,

most of these potentially damaging substances sooner or later enter nature.

There are also other characteristics of a computer, such as energy consumption levels, that are important from

the viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity

generation have a negative effect on the environment (e.g. acidic and climate-influencing emissions, radioac-

tive waste), it is vital to save energy. Electronics equipment in offices is often left running continuously and

thereby consumes a lot of energy.

What does the environmenal labelling involve?

The environmental demands has been developed by Svenska Naturskyddsforeningen (The Swedish Society

for Nature Conservation). These demands impose restrictions on the presence and use of heavy metals,

brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The

product must be prepared for recycling and the manufacturer is obliged to have an environmental policy which

must be adhered to in each country where the company implements its operational policy.

The energy requirements include a demand that the computer and/or display, after a certain period of inactivity,

shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the

computer shall be reasonable for the user.

Below you will find a brief summary of the environmental requirements met by this product. The complete

environmental criteria document may be ordered from:

TCO Development

SE-114 94 Stockholm, Sweden

Fax: +46 8 782 92 07

Email (Internet): development@tco.se

Current information regarding TCO’99 approved and labelled products may also be obtained via the Internet,

using the address: http://www.tco-info.com/

LL-T1820-B LL-T1820-H

6

Environmental requirements

Flame retardants

Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to

prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of

flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are

chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing

bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including reproductive

damage in fish-eating birds and mammals, due to the bio-accumulative * processes. Flame retardants have

been found in human blood and researchers fear that disturbances in foetus development may occur. The

relevant TCO´95 and TCO’99 demand require that plastic components weighing more than 25 grams must not

contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed

circuit boards since no substitutes are available.

Cadmium **

Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays.

Cadmium damages the nervous system and is toxic in high doses.

TCO’95 requirement states that batteries may not contain more than 25 ppm (parts per million) of cadmium.

The colour-generating layers of display screens must not contain any cadmium.

The relevant TCO’99 requirement states that batteries, the colour-generating layers of display screens

and the electrical or electronics components must not contain any cadmium.

Mercury **

Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is

toxic in high doses.

TCO’95 requirement states that batteries may not contain more than 25 ppm (parts per million) of mercury. The

relevant TCO’99 requirement states that batteries may not contain any mercury.

Both TCO´95 and TCO´99 also demand that mercury is not present in any of the electrical or electronics

components associated with the labelled unit. There is however one exception. Mercury is, for the time being,

permitted in the back light system of flat panel monitors as there today is no commercially available alterna-

tive. TCO aims on removing this exception when a mercury free alternative is available.

CFCs (freons)

The relevant TCO’95 and TCO’99 requirement state that neither CFCs nor HCFCs may be used during the

manufacture and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit

boards. CFCs break down ozone and thereby damage the ozone layer in the stratosphere, causing increased

reception on earth of ultraviolet light with e.g. increased risks of skin cancer (malignant melanoma) as a

consequence.

Lead **

Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous

system and in higher doses, causes lead poisoning. The relevant TCO’95 and TCO´99 requirement permit the

inclusion of lead since no replacement has yet been developed.

* Bio-accumulative is defined as substances which accumulate within living organisms

** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.

7

English

Notice for Users in Europe

This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by

93/68/EEC.

Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung

93/68/EWG.

Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par

la directive 93/68/CEE.

Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/23/EEG, gewijzigd door 93/68/

EEG.

Dette udstyr overholder kravene i direktiv nr. 89/336/EEC og 73/23/EEC med tillæg nr. 93/68/EEC.

Quest' apparecchio è conforme ai requisiti delle direttive 89/336/EEC e 73/23/EEC, come emendata dalla

direttiva 93/68/EEC.

Η εγκατασταση ανταποκρινεται στιζ απαιτησειζ των οδηγιων τηζ Ευρωπαïκηζ Ενωσηζ 89/336/ΕΟΚ κατ 73/23/ΕΟΚ,

óπωζ οι κανονισµοι αυτοι συµπληρωθηκαν απó την οδηγια 93/68/ΕΟΚ.

Este equipamento obedece às exigências das directivas 89/336/CEE e 73/23/CEE, na sua versão

corrigida pela directiva 93/68/CEE.

Este aparato satisface las exigencias de las Directivas 89/336/CEE y 73/23/CEE, modificadas por medio

de la 93/68/CEE.

Denna utrustning uppfyller kraven enligt riktlinjerna 89/336/EEC och 73/23/EEC så som komplette ras av

93/68/EEC.

Dette produktet oppfyller betingelsene i direktivene 89/336/EEC og 73/23/EEC i endringen 93/68/EEC.

Tämä laite täyttää direktiivien 89/336/EEC ja 73/23/EEC vaatimukset, joita on muutettu direktiivillä 93/68/

EEC.

CAUTION :

TO PREVENT ELECTRICAL SHOCK, DISCONNECT THE AC CORD BEFORE SERVICING.

CAUTION :

FOR A COMPLETE ELECTRICAL DISCONNECTION, PULL OUT THE MAIN PLUG.

VORSICHT :

UM DIE STROMZUFUHR VOLLSTÄNDIG ZU UNTERBRECHEN, DEN NETZSTECKER HERAUSZIEHEN

ENTFERNEN.

ATTENTION :

POUR UN ARRET TOTAL DE L’APPAREIL, DEBRANCHEZ LA PRISE DU COURANT SECTEUR.

VARNING :

FÖR TOTAL ELEKTRISK URKOPPLING, KOPPLA UR KONTAKTEN OCH.

PRECAUCION :

PARA UNA COMPLETA DESCONEXION ELECTRICA DESENCHUFE LA CLAVIJA DE LA RED.

8

Notice for Users in the UK

FOR CUSTOMERS IN U.K.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code :

GREEN-AND-YELLOW : Earth

BLUE : Neutral

BROWN : Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured

markings identifying the terminals in your plug proceed as follows. The wire which is coloured GREEN-

AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the

safety earth or coloured green or green-and-yellow.

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N

or coloured black.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter

L or coloured red.

Ensure that your equipment is connected correctly-if you are in any doubt consult a qualified

electrician.

"WARNING :THIS APPARATUS MUST BE EARTHED"

Notice for Users in Australia

Service Inquiries

Please contact your dealer for service if required or contact Sharp Corporation of Australia on

1 300 13 50 22 for referral to your nearest Sharp authorized Service Center.

9

English

- Under certain display conditions, minute specks

or spots may be noticeable. This is common for

liquid crystal monitors and is not a malfunction.

- The LCD panel has been manufactured using

highly elaborate technology. Properly working

pixels comprise 99.99% of total pixels. However,

please understand that 0.01% or less of pixels

may be missing or be brighter than usual.

- Do not leave the screen displaying idly for long

periods of time, as this could cause afterimage to

remain.

- If the brightness is adjusted to the minimum

setting it may be difficult to see the screen.

- The quality of the computer signal may influence

the quality of the display. We recommend using a

computer able to emit high quality video signals.

- Never rub or tap the monitor with hard objects.

- Please understand that Sharp Corporation bears

no responsibility for errors made during use by

the customer or a third party, nor for any other

malfunctions or damage to this product arising

during use, except where indemnity liability is

recognized under law.

- This monitor and its accessories may be

upgraded without advance notice.

Location

- Do not use the monitor where ventilation is poor,

where there is a lot of dust, where humidity is

high, or where the monitor may come into contact

with oil or steam, as this could lead to fire.

- Ensure that the monitor does not come into

contact with water or other fluids. Ensure that no

objects such as paper clips or pins enter the

monitor as this could lead to fire or electric

shock.

- Do not place the monitor on top of unstable

objects or in unsafe places. Do not allow the

monitor to come into contact with strong shocks

or vibrations. Causing the monitor to fall or topple

over may damage it.

- Do not use in places where the monitor will be

subject to direct sunlight, near heating equipment

or anywhere else where there is likelihood of high

temperature, as this may lead to generation of

excessive heat and outbreak of fire.

- When carrying the monitor, firmly grasp both the

display and stand section.If the monitor is lifted

by the display only, the stand may abruptly pop

out or move, and this could lead to injury. If the

monitor is inclined, the stand may move and

cause injury.

- Be careful not to allow your fingers to be pinched

between the display and stand. (Especially in the

area of attachment.)

The Power Cord

- Do not damage the power cord nor place heavy

objects on it, stretch it or overly bend it. Also, do

not add extension cords. Damage to the cord may

result in fire or electric shock.

- Insert the power plug directly into the AC outlet.

Adding an extension cord may lead to fire as a

result of overheating.

Monitor and accessory checklist

- Please check that the following items are

included in the package.

- LCD monitor (1)

- Analog signal cable (1)

(model name: QCNW-1051MPZZ)

- Digital signal cable (1)

(model name: QCNW-1044MPZZ)

- USB cable (1)

(model name: QCNW-1042MPZZ)

- CD-ROM (1)

- Operation manual (1)

Notes:

- You are advised to retain the carton in case the

monitor needs to be transported.

- Sharp Corporation holds authorship rights to the

Utility Disk program. Do not reproduce it without

permission.

Manual Scope

- In this booklet, Microsoft Windows XP will be

referred to as [WindowsXP], Microsoft Windows

Millenium as [WindowsMe], Microsoft Windows

2000 as [Windows2000], Microsoft Windows 98

as [Windows98], Microsoft Windows 95 as

[Windows95], and Microsoft Windows Version 3.1

as [Windows3.1]. When there is no need to

distinguish between programs, the term

[Windows] will be used.

- Microsoft and Windows are registered

trademarks of Microsoft Corporation.

- Macintosh is a registered trademark of Apple

Computer, Inc.

Tips and safety precautions

10

Product description

1

2 3 4 5 6

7

9 11

12

10

13

8

1. INPUT button ............................ To switch between the signal’s input terminals. (Input terminal 1

↔

Input

terminal 2)

2. MENU button ............................ This button is used to pop-up, select and close the OSD (On Screen

Display) Menu.

3. SELECT button ........................ This button is used to select menu options when the OSD Menu is dis-

played.

4.

buttons .............................. When the OSD Menu is displayed:

These buttons are used to increase or decrease the value of a selected

option.

When the OSD Menu is not displayed:

These buttons are used to adjust backlight brightness .

5. Power button

6. Power LED ................................ This LED is lit green when in use and orange when in power-saving mode.

7. USB port (downstream: 2 ports)

8. USB port (upstream: 1 port)

9. DVI-I input terminal ................... The computer’s digital RGB output terminal or analogue RGB output

terminal can be connected here.

For a digital signal input: It can be connected to a computer with a DVI-

compatible output terminal (DVI-D24 pin or DVI-I29 pin) and which has

SXGA output ability. Depending on the computer to be connected, correct

display may or may not be possible.

10.Security lock anchor ................. By connecting a security lock (purchased separately) to the security lock

anchor, the monitor is fixed so that it cannot be transported.

The security slot works in conjunction with Kensington Micro Saver

Security Systems.

11.Power terminal

12.Main power switch

13.Ventilation openings .................. Note: Never block the ventilation openings as this may lead to overheat-

ing inside the monitor and result in malfunction.

11

English

Height adjustment, angle adjustment, rotation

(long height/width)

CAUTION!

- Pressure from hands on the LCD panel could

cause damage.

- Be careful not to allow your fingers to be pinched.

Height adjustment

Adjust to an easy to view height.

80mm

Angle adjustment

Adjust to an easy to view angle.

30

5

45

Rotation (long height/width)

The display can be rotated for a long height or width

to suit the displayed content.

- Before rotating, move the display to its

uppermost position. If the display is rotated while

it is set low, it will contact the stand and could

lead to damage.

- The display can only be rotated through a range

of 90°. Applying excessive force may cause

malfunction.

- Do not apply excessive force when the cable is

connected.

To set to long height

Gently turn in the clockwise direction (to 90°).

To set to long width

Gently turn in the counterclockwise direction (to 90°).

Note:

- The orientation of the display can be changed

using Pivot Software. (p. 33)

12

CAUTION!

- When connecting, ensure that both the monitor

and computer are switched off.

- Be careful not to overly bend the cable or add

extension cords as this could lead to a

malfunction.

Cable storage

If necessary, excess cable can be housed in the

stand.

1. Remove the cover.

Gently pull the top of the cover towards yourself.

2. Run cable along the back of the stand.

Pass cable in front of the stand, and then bring it

through the back.

- If the display is to be rotated, first house the

cables with the display in the long height position,

so there is sufficient length when the display is

turned.

Connecting the monitor and turning

the monitor on and off

3. Refit the cover.

Be careful not to pinch the cable.

- If the cover is hard to refit, do not force it.

Check whether cables are trapped.

CAUTION!

- If the display is to be rotated, first house the

cable, and then check while gently turning the

display. If it cannot be turned, rehouse the cable

with sufficient slack. (If there is insufficient cable

length, rotation will be impossible. Forcing rotation

may cause cable disconnection.)

13

English

Connecting the monitor and turning the monitor on and off

Connecting the monitor to a computer

Connecting the monitor to a computer using the acces-

sory signal cable.

- This monitor has two input terminals to enable

connection to two computers. The monitor comes

with one analog signal and one digital signal

cable. If both connections are analog, or both are

digital, you will need another signal cable sold

separately.

- Digital signal cable: model name NL-C01E

- Analog signal cable: model name NL-C02E

Analog RGB connection

Using the accessory analog signal cable, connect to

the analog RGB output terminal of the computer.

- Paying attention to connector direction, firmly

insert the signal cable to terminal, and then

tighten the screws at both sides.

If connecting to a D-sub 15 pin 2 row Apple Power

Macintosh, attach a Macintosh conversion adapter

(to be purchased separately) to the analog signal

cable.

Analog signal cable

Analog RGB output

terminal

Macintosh conversion adapter

Digital RGB connection

Using the accessory digital signal cable, connect

with the digital RGB output terminal of the computer.

- For digital RGB connection, the monitor has an

input for connecting to a computer with a DVI-

compatible output connector (DVI-D 24 pin or DVI-

I 29 pin) and SXGA output capability. (Depending

on the type of computer to be connected, the

display may not work correctly.)

- Paying attention to connector direction, firmly

insert the signal cable to terminal, and then

tighten the screws at both sides.

Set the monitor as follows when establishing a digital

connection with a Power Mac using an ADC-DVI

adapter made by Belkin. (Operation has been

checked with the Power Mac G4 M7627J/A)

- Perform settings with the Power Mac power

supply off.

1. After connecting the power cord, turn on the

monitor’s main power.

2. Press the

button and button simultaneously,

and while doing this press the POWER button

(i.e. turn the power on).

3. Set the input terminal to which the Belkin ADC-

DVI adapter is connected to ON.

Use the SELECT button to select [INPUT1] or

[INPUT2], and use the

buttons to select [ON]

and [OFF].

- Do not set to [ON] if you are not using a

Belkin ADC-DVI adapter, as this may result in

incorrect display.

4. Press the power button, and turn off the monitor

power.

This completes setting.

Digital signal cable

Digital RGB output

terminal

Input terminal 1 and 2

You can connect to either

side.

Input terminal 1 and 2

You can connect to either

side.

14

Connecting the monitor and turning the monitor on and off

Connecting the monitor to a power source

Power terminal

Power cord

AC outlet

Connecting a USB device

This monitor is equipped with a USB standard (Rev.

1.1) self-powered hub.

Downstream (2 ports)

Each of these ports enables connection of a USB de-

vice with working current up to 500 mA.

Upstream (1 port)

This enables connection of a USB compatible com-

puter or USB hub.

Notes:

- If a USB cable is required, please use the one

included.

- Before connecting, ensure that the shape of the

USB cable connector is correct.

- For information regarding the USB function (such

as set-up) please refer to the operation manual of

the computer to be connected.

- Some computers, OS and other devices may not

be able to be activated. To ascertain a certain

device's USB compatibility, please contact the

manufacturer of the device.

Upstream

USB cable

Downstream

15

English

Connecting the monitor and turning the monitor on and off

Turning the power on

1. Turn on the main power of the monitor.

- When switching the main power switch on and

off, always wait for an interval of at least 5

seconds. Rapid switching may result in

malfunction.

2. Press the monitor's POWER button.

The power LED will light up orange.

3. Turn on the computer.

ON

When a signal is input from the computer, the

power LED lights up green, and the screen is

displayed (After power is turned on, it may take a

little time until the screen is displayed.)

- If the input terminal to which the computer is

connected has not been selected, the screen

will not be displayed. If necessary, perform

input terminal switching. (right column)

Notes: (when using an analog signal)

- If using the monitor for the first time or after

having changed the system settings during use,

perform an automatic screen adjustment (p. 18).

- When connecting to a notebook, if the notebook

computer's screen is set so that it is displaying at

the same time, the MS-DOS screen may not be

able to display properly. In this case, change the

settings so that only the monitor is displaying.

Turn on the computer

power supply.

Changing between input terminals

Use the INPUT button to switch between signal input

terminals.

Input terminal 1 Input terminal 2

INPUT-1

< >

INPUT-2

< >

INPUT

The input signal type (ANALOG/DIGITAL) is

displayed within angle brackets < >.

Main power switch

Press power button

16

Connecting the monitor and turning the monitor on and off

Turning the power off

1. Turn the computer off.

2. Press the monitor's POWER button.

The Power LED will disappear.

OFF

If the monitor will not be used for a long time, turn off

the main power switch of the monitor, and remove

the power plug from the outlet.

Press power button

Turn the computer off

17

English

Adjusting the screen display

For analog signal

1. First perform an automatic adjustment. (p. 18)

2. Perform manual adjustment where necessary.

(p. 19)

For digital signal

The monitor can generally be used without

adjustment. If necessary perform manual adjust-

ment. (p. 22)

Note:

- All adjustments will be saved even after turning

the power off.

Adjustment value reset

Resetting all adjustment values

All adjustment values can be returned to their origi-

nal ex-factory values in one command.

1. Turn off the monitor power.

2. Press the MENU button and the SELECT button

simultaneously, and while doing this press the

power button (i.e. turn the power on). When [ALL

RESET] appears on the screen, the reset is

complete.

Note:

- While ALL RESET is displayed, the control

buttons are disabled.

- It is not possible to reset values when the

adjustment lock is in place. Remove the

adjustment lock before attempting to operate

control buttons.

ADJUSTMENT menu reset

The adjustment values of the analogue signal time’s

ADJUSTMENT menu can be returned to their original

ex-factory values.

1. Turn on the monitor power.

2. Press the MENU button and the

button

simultaneously. When [RESET] appears on the

screen, the reset is complete.

Adjustment lock function

By disabling the control buttons (i.e. setting the lock)

any attempted changes to adjusted values will be

voided.

1. Turn off the monitor power.

2. While pressing the MENU button, press the

power button (i.e. turn the power on).

Continue to press the button until the message

appears on the screen.

When the menu is unlocked:

[ADJUSTMENT LOCKED] will appear on

the screen, and the lock will be set.

When the menu is locked:

[ADJUSTMENT UNLOCKED] will appear

on the screen, and the lock will be

removed.

Note:

- When the lock is in place, all buttons other than

the power button are disabled.

Adjusting the backlight

The backlight brightness can be adjusted.

Carry out the commands without the On Screen

Display (OSD) Menu displayed. If the OSD Menu is

displayed, press the MENU button (several times

may be required) and begin when the OSD Menu has

disappeared.

1. Without the OSD Menu being displayed, push the

or the button. At the bottom of the screen

the BRIGHT bar will appear.

2. Adjust by pressing the button (darker) or

button (lighter).

The BRIGHT bar automatically disappears approxi-

mately 5 seconds after the last command.

18

Adjusting the screen display (With analog connection)

Automatic screen adjustment

Options in the ADJUSTMENT Menu can be adjusted

automatically (CLOCK, PHASE, H-POS V-POS).

Note:

- When setting up this monitor for the first time or

after having changed an aspect of the current

system, perform an automatic screen adjustment

before use.

On Screen Display for the automatic

adjustment

First display an image that makes the entire screen

light.

If you are using Windows, you can use the

Adjustment Pattern on the accompanying CD-ROM.

Opening the Adjustment Pattern (for Windows)

This explanation is for Windows 95/98/2000/Me/XP,

and assumes that the CD-ROM drive is "D drive".

1. Load the accessory CD-ROM into the CD-ROM

drive of the computer.

2. Open [My Computer] and select CD-ROM. If

using Windows 3.1, open [File Manager] and

choose "D drive".

3. Double click on [Adj_uty.exe] to run the

Adjustment Program. The Adjustment Pattern will

appear.

Adjustment pattern

Notes:

- After completing the adjustments, press the

computer’s [Esc] key to exit the Adjustment

Program.

- If your computer’s display mode is set to 65K

colors, you may see the different color levels in

each color pattern or the gray scale may look

colored. (This is due to the specification of the

input signal and is not a malfunction.)

How to Adjust

1. Press the MENU button.

The ADJUSTMENT Menu will be displayed.

2. Press the button.

The screen will become dark and [ADJUSTING]

will be displayed. After a few seconds the

ADJUSTMENT Menu will return. (The automatic

adjustment is now complete.)

3. Press the MENU button 4 times to make the

OSD Menu disappear.

Notes:

- In most cases automatic adjustment is sufficient.

- If necessary due to any of the following, manual

adjustments (p. 19) can be performed after the

automatic adjustment.

- When further fine adjustment is needed.

- When the computer’s video input signals are

Composite Sync or Sync On Green.

(Automatic adjustments may not be possible.)

- When [OUT OF ADJUST] is displayed.

(When the screen displays an entirely dark

image, the automatic screen adjustment may

be disabled. When making an automatic

adjustment, be sure to either use the

Adjustment Pattern or try displaying an image

that makes the entire screen very bright.)

19

English

Manual screen adjustment

Adjustments can be made using On Screen Display

(OSD) Menu provided.

On Screen Display for adjustment

If you are using Windows, open the Adjustment

Pattern on the accompanying CD-ROM. (p. 18)

If your system is not Windows, you can not use the

Adjustment Pattern. Therefore display an image that

makes the entire screen light and adjust it through

checking visually its actual tone.

This chapter provides the procedure how to adjust

the screen by using Adjustment Pattern (for Win-

dows)

How to adjust

1. Press the MENU button.

The ADJUSTMENT Menu will be displayed.

At this point relevant menu options can be

adjusted.

Each time the MENU button is pressed the next

menu is selected. (ADJUSTMENT → GAIN

CONTROL → COLOR CONTROL → MODE

SELECT → OSD Menu disappears)

Notes:

- The OSD Menu automatically disappears

approximately 30 seconds after the last

command.

ADJUSTMENT Menu

MANUAL: Individual menu options are manually

adjusted.

AUTO: Every menu option is automatically

adjusted.

Notes:

- Press the

button to select [AUTO].

- To choose a menu option:SELECT button

- To go to the next menu: MENU button

CLOCK

The figure below demonstrates how to adjust so that

vertical flicker noise is not emitted. (

buttons)

PHASE

The figure below demonstrates how to adjust so that

horizontal flicker noise is not emitted. (

buttons)

Note:

- Adjustments to PHASE should be made only

after CLOCK has been correctly set.

H-POS (horizontal positioning) and V-POS

(vertical positioning)

To center the screen image within the boundaries of

the screen, adjust the left-right (H-POS) values and

the up-down (V-POS) values. (

buttons)

Adjusting the screen display (With analog connection)

Vertical flicker noise

Horizontal flicker noise

Screen frame

20

COLOR CONTROL Menu

Notes:

- To choose a menu option:SELECT button

- To go to the next menu: MENU button

COLOR MODE

Color tone can be set as below.

STD ..... Displays image with the color tone

results from original scheme of liquid

crystal panel.

sRGB ... sRGB is international standard of color

representation specified by IEC

(International Electrotechnical

Commission). Color conversion is made

in taking account of liquid crystal’s

characteristics and represents color tone

close to it original image.

VIVID ... Displays an image with dynamic and

VIVID primary colors.

- If [sRGB] or [VIVID] has been selected, items

subsequent to [WHITE BALANCE] cannot be set.

Subsequent items can be set when the [COLOR MODE]

is [STD].

WHITE BALANCE

After selecting [WHITE BALANCE], press the

but-

ton and display the adjustment menu.

Notes:

- On settings other than [STD] not all graduations

can be displayed. To display all graduations, set

to [STD].

- Use the

buttons to select [COOL], [·], [STD],

[·], [WARM] or [USER].

- Selecting USER will display the setting values for

[R-CONTRAST], [G-CONTRAST] and [B-

CONTRAST], in order to make fine adjustments.

- Use the SELECT button to select

[R-CONTRAST], [G-CONTRAST] and

[B-CONTRAST].

- When adjustment complete: MENU button

GAIN CONTROL Menu

MANUAL: Individual menu options are manually

adjusted.

AUTO: Every menu option is automatically

adjusted using the Auto Gain Control*

function.

Notes:

- Press the

button to select [AUTO].

- To choose a menu option:SELECT button

- To go to the next menu: MENU button

* Auto Gain Control function

- The Auto Gain Control adjusts contrast and black

level based on the brightest color of the image

displayed. If you are not using the Adjustment

Pattern it is necessary to have an area of 5 mm x

5 mm of white displayed, and if not adjustments

may not be possible. (In such case, [OUT OF

ADJUST] will appear and setting values remain

unchanged.)

- If the signal coming from the computer is

composite sync or sync on green, automatic

adjustment cannot be performed. Please perform

manual adjustment instead.

BLACK LEVEL

Total screen brightness can be adjusted while

watching the color pattern. (

buttons)

CONTRAST

While watching the color pattern, adjustments can be

made so that all graduations appear. (

buttons)

Adjusting the screen display (With analog connection)

Color pattern

La page charge ...

Sharp LL-T1820-B Manuel utilisateur

Ce manuel convient également à

Sharp LL-T1820-B Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents