Kenwood KDC-C521FM - CD Changer With RF Modulator Manuel utilisateur

©B64-2788-00/00 (KW/EW)

COMPACT

DIGITAL AUDIO

Take the time to read through this instruction manual.

Familiarity with installation and operation procedures will help you

obtain the best performance from your new compact disc auto changer.

For your records

Record the serial number, found on the back of the unit, in the spaces desig-

nated on the warranty card, and in the space provided below. Refer to the

model and serial numbers whenever you call upon your KENWOOD dealer for

information or service on the product.

Model KDC-C521FM, KDC-C471FM Serial number

CD AUTOCHANGER / CONTROLLER / FM MODULATOR SYSTEM

INSTRUCTION MANUAL

CHANGEUR AUTOMATIQUE DE CD / CONTROLEUR / SYSTEME

A MODULATION DE FM

SISTEMA DEL MODULADOR DE FM / CONTROLADOR / CAMBIADOR

AUTOMATICO DE DISCOS COMPACTOS

MANUAL DE INSTRUCCIONES

KDC-C521FM

KDC-C471FM

MODE D’EMPLOI

KDC-C521FM_C471FM_(KE)_Cover 2004.01.15 05:28 PM Page 1

— 2 —

English

Contents

Before use

Safety Precautions ........................................................................3

Handling Compact Discs...............................................................4

Loading Compact Discs ................................................................5

General features

Power............................................................................................6

Selecting the Source.....................................................................6

Sirius satellite radio tuner features

Selecting Sirius Mode ...................................................................7

Switching Seek Mode...................................................................7

Selecting the Preset Band.............................................................7

Channel Preset Memory ...............................................................8

Preset Tuning................................................................................8

Channel Scan ................................................................................8

Channel Search ............................................................................8

Direct Access Tuning ....................................................................9

Switching Display..........................................................................9

Disc control features

Playing Disc.................................................................................10

Fast Fowarding and Reversing....................................................10

Track Search................................................................................10

Disc Search .................................................................................11

Direct Track Search.....................................................................11

Direct Disc Search.......................................................................11

Track/Disc Repeat .......................................................................11

Track Scan...................................................................................11

Random Play ...............................................................................11

Magazine Random Play...............................................................12

Switching Display........................................................................12

Menu system

Menu System..............................................................................13

Changing the Transmission Frequency.......................................14

Modulation level..........................................................................14

Dynamic control ..........................................................................14

Text Scroll ...................................................................................14

Sirius ID (ESN).............................................................................14

Basic Operations of remote .............................................15

Installation

Accessories.................................................................................17

Installation Procedure..................................................................17

Installation...................................................................................18

Connecting Wires to Terminals...................................................20

Troubleshooting guide .......................................................22

Specifications .........................................................................25

Warning ......................................................................................26

KDC-C521FM_C471FM_(KE)_U.S 2004.01.16 10:51 AM Page 2

— 3 —

Take the following precautions to prevent

fire and avoid personal injury:

• When extending the ignition wire, battery

wire, or ground wire, use 0.75mm

2

(AWG18)

or larger automotive grade wire to avoid wire

deterioration or damage to the covering.

• Check that no metal objects (coins, tools,

etc.) are left inside the unit to avoid short

circuits.

• If you smell or see smoke, turn the power off

immediately and consult your Kenwood

dealer.

• Do not touch the liquid crystal fluid if the LCD

is damaged or broken due to shock. The

liquid crystal fluid may be dangerous to your

health or even fatal.

If the liquid crystal fluid from the LCD

contacts your body or clothing, wash it off

with soap immediately.

Take the following precautions to

keep the unit in proper working order.

• Be sure the unit is connected to a 12V DC

power supply with a negative ground

connection.

• Do not open the top or bottom cover.

• Do not install the unit in places it is exposed

to direct sunlight, high heat or humidity,

water may splash over it, or dust exists.

2CAUTION

2WARNING

• When replacing a fuse, only use a new one

with the prescribed rating. Using a fuse with

the wrong rating may cause your unit to

malfunction.

• To prevent a short circuit when replacing a

fuse, first disconnect the wiring harness.

• If you have difficulty in installing this unit in

your vehicle, contact your Kenwood dealer.

• If it doesn’t seem to be working properly,

first press the Reset button. If the

malfunction persists, consult your Kenwood

dealer.

• Some car stereos cause the sound of the

tuner to make for a moment when an

engine is activated.

•The reception of the tuner may be reduced

a little if the KDC-C521FM, KDC-C471FM is

used.

• If the sound is lower than the tuner sound,

raise up the volume level of the CD with

using the receiver.

• Do not use your own screws. Use only the

screws provided. If you use the wrong

screws, you could damage the unit.

NOTE

Cleaning the Unit

If the front panel gets dirty, turn off the

power and wipe the panel with a dry silicon

cloth or soft cloth.

Do not use hard cloths or paint thinner,

alcohol, or other volatile solvents. These may

damage external surfaces or remove

indicator characters.

Lens fogging

In cold climates, there may be a period after

you turn on your vehicle’s heater when the

lens that guides the laser beam used in your

CD player fogs up. If this happens, you

cannot play compact discs. Take out discs

and the fogging will disappear. If it does not

return to normal after several hours, contact

your Kenwood dealer.

2CAUTION

Safety Precautions

Reset button

KDC-C521FM_C471FM_(KE)_U.S 2004.01.16 10:51 AM Page 3

— 4 —

English

Handling Compact Discs

Playing a CD that is dirty, scratched or

warped can cause the sound to skip and

the unit to operate incorrectly, resulting in

worsened sound quality. Take the

following precautions to prevent your CDs

from getting scratched or damaged.

Handling CDs

• Do not touch the recorded side of the CD (the

side opposite the label) when holding it.

• The reflective film on a CD-R or a CD-RW is more

fragile than that on an ordinary music CD, and may

peel off if scratched. Fingerprints on a CD-R or CD-

RW are also more likely to cause skipping when

the disc is played. For these reasons, handle the

disc very carefully. Detailed handling instructions

will appear on the CD-R or CD-RW package: read

this information carefully before using the disc.

• Do not stick tape on either side of the CD.

Storing CDs

• Do not store CDs in areas exposed to direct

sunlight (such as a car seat or the dashboard) or

other hot places.

•A CD-R or CD-RW is more susceptible than a

music CD to damage from high temperatures and

humidity, and in some cases, may become

unusable if left in the car for long periods of time.

• Remove CDs from the unit when not listening to

them for a while, and put them back in their

cases. Do not pile up CDs that are removed from

their cases or prop them against something.

Cleaning CDs

I

f a CD has gotten dirty, wipe it off gently using a

commercially available cleaning cloth or a soft

cotton cloth, starting from the center of the disc

and moving outward. Do not clean CDs with

conventional record cleaners, anti-static formulas,

or chemicals such as paint thinner or benzene.

Checking New CDs for Burrs

When playing a new CD for the first time, check

that there are not any burrs stuck to the perimeter

of the disc or in the central hole. CDs with burrs

stuck on them may not load properly or may skip

while playing. Remove burrs using a ballpoint pen

or a similar utensil.

Do Not Load CD Accessories

Do not use commercially available CD accessories

that can be loaded into the CD slot, such as

stabilizers, protective sheets, or CD cleaning discs,

since they can cause the unit to malfunction.

Do Not Use Special Shape CDs

• Be sure to use round shape CDs only for this unit

and do not use any special shape CDs. Use of

special shape CDs may cause the unit to

malfunction.

• This unit can only play the CDs with

.

It may not correctly play disks which do not have

the mark.

• CD-Rs and CD-RWs which have not undergone

finalization processing cannot be played. (For

more information on finalization processing, refer

to the manual for your CD-R/CD-RW writing

software or CD-R/CD-RW recorder.) Additionally,

depending on the recording status, it may prove

impossible to play certain CDs recorded on CD-R

or CD-RW.

Do Not Use CDs with Sticker on the

Labeled Side

Do not use the CD with the label sticker stuck on

it.

Using such a CD may cause the CD to be

deformed and the sticker to peel off, resulting in

malfunction of the unit.

2CAUTION

Tape

Burrs

KDC-C521FM_C471FM_(KE)_U.S 2004.01.16 10:51 AM Page 4

— 5 —

'

Make sure the disc magazine is the

right way up with the Kenwood logo

on the top.Pull the tray out by the

projection.

Insert the magazine into the CD changer

until it clicks.

Open the CD changer door.

Place the disc on the tray with the label

facing upwards. Insert the tray into the

disc magazine until it locks. The discs

are numbered from the bottom from 1

to 6 or 10.

• Take care to insert the tray into the

correct grooves in the disc magazine.

• Keep all the trays in the magazine even

when empty.

• 8-cm discs cannot be used. If an 8-cm disc

adapter is used, the disc cannot be ejected.

2CAUTION

Loading Compact Discs

1

2

"KENWOOD"

Projection

4

3

'

Open the CD changer door, and press the

EJECT button.

Be sure to open the door completely before

pressing the EJECT button. If the door is not

completely open, the magazine may hit the

door and cause damage of malfunction.

NOTE

Magazine ejection

5

6

Use the CD changer with its door closed

to prevent the entry of dust into the

changer.

NOTE

Close the CD changer door.

KDC-C521FM_C471FM_(KE)_U.S 2004.01.16 10:51 AM Page 5

— 6 —

English

General features

SRC

Turning ON the Power

Press the [SRC] button.

Turning OFF the Power

Press the [SRC] button for at least 1 second.

The FM modulator is turned OFF and the radio can be heard.

• Be sure to turn down the volume whenever you listen to the radio

or a cassette tape after stopping the disc play.

• During the disc play is being conducted, you are not able to

receive ordinary Radio broadcasting because antenna output is

switched into compact disc player‘s side.

Power

Set the car radio FM station to 88.3 MHz. See Page 14 for

more information on changing the transmission frequency.

Press the [SRC] button.

Source required Display

Sirius (Function of the KDC-C521FM/ "SIRIUS"

C471FM for the Americans Market)

CD auto-changer "CHANGER"/

"CHANGER-1"/

"CHANGER-2"

Auxiliary input "AUX"

Off

• For Sirius the KTC-SR901 or KTC-SR902 is necessary.

• For Auxiliary input one of the below optional accessories is

necessary.

- KCA-S210A

- CA-C1AX

- CD changer with an Auxiliary input function installed.

Selecting the Source

KDC-C521FM_C471FM_(KE)_U.S 2004.01.16 10:51 AM Page 6

— 7 —

Sirius satellite radio tuner features

(Function of the KDC-C521FM/ C471FM for the Americans Market)

d

u

4

SRCH

¢

SRC

DISP

1-6

SEEK

Band display Channel number

Preset station number

Press the [SRC] button.

Select the "SIRIUS" display.

• You need to subscribe to SIRIUS to receive the service by Sirius

Satellite Radio. Consult SIRIUS if "CALL 888-539 SIRIUS TO

SUBSCRIBE" appears.

• It may take a little time to start receiving after you selected the

SIRIUS source.

• If the signal receiving fails, "ACQUIRING SIGNAL" appears.

Selecting Sirius Mode

Press the [u] button.

Each time the button is pressed the preset band switches

between the SR1,SR2,SR3, and SR4.

Selecting the Preset Band

Sets the seeking mode.

Press the [SEEK] button.

Each time the button is pressed the Seek mode switches as

shown below.

Display Operation

"SEEK 1" Normal manual seeking control.

"SEEK 2" Search in order of the channels in the

Preset memory.

You cannot operate this unit during switching Channel or Category.

Switching Seek Mode

SCAN indicator

KDC-C521FM_C471FM_(KE)_U.S 2004.01.16 10:51 AM Page 7

— 8 —

English

Putting the channel in the memory.

1 Select the preset band

Press the [u] button.

2 Select the channel to put in the memory

Press the [4] or [¢] button.

3 Put the channel in the memory

Press the [1] — [6] button for at least 2 seconds.

The preset number display blinks 1 time.

On each band, 1 channel can be put in the memory on each [1] —

[6] button.

Only the channel number is stored. Category information is not

stored.

Channel Preset Memory

Calling up the channels in the memory.

1 Select the preset band

Press the [u] button.

2 Call up the channel

Press the [1] — [6] button.

Preset Tuning

You can switch from Up/Down of Channel in a category being

selected to Previous/Next of Category that includes Channel

being received and vice versa.

1 Enter Channel Search mode

Press the [SRCH] button.

2 Select the Category

Press the [u] or [d] button.

3 Select the Channel

Press the [4] or [¢] button.

Canceling Channel Search

Press the [SRCH] button.

You cannot operate this unit until all the Category information is

acquired.

Channel Search

Scanning for the channel you want to listen to.

1 Start Channel Scan

Press the [SEEK] button for at least 1 second.

"SCAN" indicator is ON.

2 Release it when the channel you want to listen to is received

Press the [SEEK] button for at least 1 second.

Channel Scan

Sirius satellite radio tuner features

(Function of the KDC-C521FM/ C471FM for the Americans Market)

KDC-C521FM_C471FM_(KE)_U.S 2004.01.16 10:51 AM Page 8

— 9 —

You can display various kinds of text data transmitted from

broadcasting stations by switching as follows.

Press the [DISP] button.

Each time the button is pressed the display switches as shown

below.

Information Display

Channel Number

Channel Name "CHANNEL"

Song Title "SONG"

Artist Name "ARTIST"

Category Name "CATEGORY"

Album Title "ALBUM"

Switching Display

Entering the channel and tuning.

1 Enter Direct Access Tuning mode

Press the [DIRECT] button on the remote.

2 Enter the channel number

Press the number buttons.

3 Do Channel Search

Press the [4] or [¢] button.

Canceling Direct Access Tuning

Press the [DIRECT] button on the remote.

• If you make no button operation for 10 seconds, the Direct Access

Tuning mode is automatically canceled.

• You can set up to Channel number 223.

• If there is no signal in the input Channel, "NO CHANNEL" appears.

• If you cannot receive any signal in the input Channel due to a bad

condition on radio wave or another problem, "ACQUIRING SIGNAL"

appears.

Direct Access Tuning (Function of remote)

KDC-C521FM_C471FM_(KE)_U.S 2004.01.16 10:51 AM Page 9

— 10 —

English

Disc control features

d

u

4

6

¢

SRC

DISP

SCAN

RDM REP

M.RDM

Track number

Track time

Disc number

Indicator

Play:

Press the [SRC] button.

Select the "CHANGER"/ "CHANGER-1"/ "CHANGER-2" display.

Stop the play:

Press the [SRC] button for at least 1 second.

The FM modulator is turned OFF and the radio can be heard.

Pause and play:

Press the [6](38...Remote) button.

Each time the button is pressed it pauses and plays.

If you press the switch once more, the disc is replayed from

the paused part.

Playing Disc

Fast Forwarding

Hold down on the [¢] button.

Release your finger to play the disc at that point.

Reversing

Hold down on the [4] button.

Release your finger to play the disc at that point.

Fast Forwarding and Reversing

Searching for a song on the disc.

Press the [4] or [¢] button.

Track Search

KDC-C521FM_C471FM_(KE)_U.S 2004.01.16 10:51 AM Page 10

— 11 —

Doing Disc Search by entering the disc number.

1 Enter the disc number

Press the number buttons on the remote.

2 Do Disc Search

Press the [+] or [–] button.

Canceling Direct Disc Search

Press the [38] button.

Input "0" to select disc 10.

Direct Disc Search

(Function of disc changers with remote)

Replaying the song, disc in the Disc changer you're listening to.

Press the [REP] button.

When it's ON, the "REP" indicator is ON.

Each time the button is pressed the Repeat Play switches as

shown below.

Repeat play Display

Track Repeat Track No. blinks.

Disc Repeat Disc No. blinks.

OFF —

Track/Disc Repeat

Play all the songs on the disc in random order.

Press the [RDM] button.

Each time the button is pressed Random Play turns ON or OFF.

When it's ON, the "RDM" indicator is ON and the track number

blinks.

When the [¢] button is pressed, the next song select starts.

Random Play

Playing the first part of each song on the disc you are listening to

and searching for the song you want to listen to.

1 Start Track Scan

Press the [SCAN] button.

"SCAN" indicator is ON.

2 Release it when the song you want to listen to is played

Press the [SCAN] button.

Track Scan

Doing Track Search by entering the track number.

1 Enter the track number

Press the number buttons on the remote.

2 Do Track Search

Press the [T.UP] or [T.DOWN] button.

Canceling Direct Track Search

Press the [38] button.

Direct Track Search (Function of remote)

Selecting the disc set in the Disc changer.

Press the [u] or [d] button.

Disc Search

KDC-C521FM_C471FM_(KE)_U.S 2004.01.16 10:51 AM Page 11

— 12 —

English

Play the songs on all the discs in the disc changer in random

order.

Press the [M.RDM] button.

Each time the button is pressed the Magazine Random Play turns

ON or OFF.

When it's ON, the "RDM" indicator is ON and the track and disc

number blink.

When the [¢] button is pressed, the next song select starts.

Magazine Random Play

(Function of disc changer)

Disc control features

Switching the information displayed.

Press the [DISP] button.

Each time the button is pressed the display switches as shown

below.

Information Display

P-Time

Disc title "DISC TITLE"

Track title "TRACK TITLE"

This unit does not display the information of Disc title and Track title.

Select the information of P-Time.

Switching Display

KDC-C521FM_C471FM_(KE)_U.S 2004.01.16 10:51 AM Page 12

— 13 —

Menu system

The Menu system basic operation method is explained here. The

reference for the Menu items and their setting content is after

this operation explanation.

1 Enter Menu mode

Press the [MENU] button for at least 1 second.

"MENU" is displayed.

2 Select the menu item

Press the [u] or [d] button.

3 Set the menu item

Press the [4] or [¢] button.

You can continue by returning to step 2 and setting other items.

4 Exit Menu mode

Press the [MENU] button.

When other items that are applicable to the basic operation method

above are displayed afterwards their setting content chart is entered.

Menu System

d

u

¢

4

MENU

KDC-C521FM_C471FM_(KE)_U.S 2004.01.16 10:51 AM Page 13

Sirius ID (Electronic Serial Number) is displayed.

Sirius ID (ESN)

<When the KTC-SR901 or KTC-SR902 is

connected>

Menu system

Function of the KDC-C521FM/ C471FM for the Americans Market

— 14 —

English

Select the frequency.

Display Setting

"T-FREQ 87.7" 87.7 MHz

"T-FREQ 87.9" 87.9 MHz

"T-FREQ 88.1" 88.1 MHz

"T-FREQ 88.3" 88.3 MHz (Initial setting)

"T-FREQ 88.5" 88.5 MHz

"T-FREQ 88.7" 88.7 MHz

"T-FREQ 88.9" 88.9 MHz

"T-FREQ 89.1" 89.1 MHz

"T-FREQ 89.3" 89.3 MHz

"T-FREQ 89.5" 89.5 MHz

"T-FREQ 89.7" 89.7 MHz

"T-FREQ 89.9" 89.9 MHz

Some car radios cannot receive a 87.7 MHz frequency.

Changing the Transmission Frequency

Select the modulation level.

Display

"MOD LEVEL 1"

"MOD LEVEL 2" (Initial setting)

"MOD LEVEL 3"

"MOD LEVEL 4"

Modulation level

Settingt the Dynamic control.

Display Setting

"D-CONT ON" The dynamic control is ON.

"D-CONT OFF" The dynamic control is OFF. (Initial setting)

The unit comes with the prevention of distortion function to reduce

sound distortion.

If the sound is distorted severely, press the [4]or[¢] button on

the display unit and then set the function to "ON". If the prevention

of distortion function is set to "ON", the sound extension is reduced.

If a disc with a high recording level is used, the sound may distort

even if the prevention of distortion function is set to "ON". In this

case, reduce the modulation level.

Dynamic control

Setting the displayed text scroll.

Display Setting

"SCROLL MANU" Doesn't scroll.

"SCROLL AUTO" Scrolls when the display changes.

The texts scrolled are shown below.

- Song title/ Artist name/ Album title/ Category name

Text Scroll

KDC-C521FM_C471FM_(KE)_U.S 2004.01.16 10:51 AM Page 14

— 15 —

[0] – [9]

SRC

M.RDM

DIRECT

SCAN

T.

DOWN

T.

UP

D.REP

REP

RDM

DISC

+

–

38

SRC

D.REP

RDM

/ CH SEARCH

M.RDM/ DIRECT

T.UP/T.DOWN

REP

SCAN

Basic Operations of remote

[SRC] button

Each time the button is pressed the source switches.

Basic operations

Use two "AA" batteries.

Slide the cover while pressing downwards to remove it as

illustrated.

Insert the batteries with the + and

–

poles aligned properly,

following the illustration inside the case.

Store unused batteries out of the reach of children. Contact a doctor

immediately if the battery is accidentally swallowed.

• The provided batteries are intended for use in operation

checking, and their service life may be short.

• When the remote controllable distance becomes short, replace

both of the batteries with new ones.

•A portion of the operations may not be possible, depending on

the unit that is connected.

Do not set the remote on hot places such as above the dashboard.

2WARNING

Loading and Replacing the battery

Function of the KDC-C521FM/ C471FM for the European Market

KDC-C521FM_C471FM_(KE)_U.S 2004.01.16 10:51 AM Page 15

— 16 —

English

[T.UP]/ [T.DOWN] buttons

Doing track forward and backward.

[+]/ [–] buttons

Doing disc forward and backward.

[38] button

Each time the button is pressed the song pauses and plays.

[REP] button

Each time the button is pressed Track Repeat function turns ON

or OFF.

[D.REP] button

Each time the button is pressed Disc Repeat function turns ON or

OFF.

[RDM] button

Each time the button is pressed Random Play turns ON or OFF.

[M.RDM] button

Each time the button is pressed Magazine Random function turns

ON or OFF.

[SCAN] button

Each time the button is pressed Trak Scan function turns ON or

OFF.

[0] — [9] buttons

When in <Direct Track Search> (page 11) and <Direct Disc

Search> (page 11), enter the track/disc number.

In Disc source

[+] buttons

Select the band.

Each time the [+] button is pressed it switches between the

SR1, SR2, SR3, and SR4 bands.

[T.UP]/ [T.DOWN] buttons

Tune up or down the channels.

[0] — [9] buttons

Press buttons [1] — [6] to recall preset channels.

[DIRECT] button

Enters and cancels the <Direct Access Tuning> (page 9) mode.

[CH SEARCH] button

Enters and cancels the <Channel Search> (page 8) mode.

In Sirius source

Basic Operations of remote

Function of the KDC-C521FM Function of the KDC-C521FM/ C471FM for the European Market

KDC-C521FM_C471FM_(KE)_U.S 2004.01.16 10:51 AM Page 16

— 17 —

.........1

1

.........4

2

.........4

3

.........1

4

External view

......... Number of items

The use of any accessories

except for those provided

might result in damage to the

unit. Make sure only to use

the accessories shipped with

the unit, as shown above.

2CAUTION

When drilling a hole in the car chassis to install the unit, check

first that nothing is on the other side.

• If the fuse blows, first make sure the wires aren’t touching to

cause a short circuit, then replace the old fuse with one with the

same rating.

• Do not let unconnected wires or terminals touch metal on the car

or anything else conducting electricity. To prevent a short circuit,

do not remove the caps on the ends of the unconnected wires or

the terminals.

• After the unit is installed, check whether the brake lamps,

blinkers, wipers, etc. on the car are working properly.

• Insulate unconnected wires with vinyl tape or other similar

material.

• Some disc changers need conversion cords for connection. See

the section on "Safety Precautions" for details.

2CAUTION

2WARNING

Removing the transportation screws

■

Transportation

screws

Remove all 3 transportation screws for protecting the internal

mechanism before you start to install the unit.

After removing the transport screw, retain it carefully and

attach it again before transporting the unit again.

NOTE

.........1

5

.........2

6

.........1

7

8

9

For the model of European Market.

.........1

Accessories

1. To prevent a short circuit, remove the key from the ignition and

disconnect the - battery.

2. Make the proper input and output wire connections for each unit.

3. Connect the wiring harness wires in the following order: ground,

battery, ignition.

4. Install the unit in your car.

5. Reconnect the - battery.

6. Press the reset button.

Installation Procedure

KDC-C521FM_C471FM_(KE)_U.S 2004.01.16 10:51 AM Page 17

— 18 —

English

Angle adjustment switches

■

The angle adjustment switches on the both saides of the unit

are to be set according to the angle of installation of the CD

auto changer. Set both of the two switches to the same

position. If the switches are not set properly, sound skip or

other malfunction may occur.

Set the angle adjustment switches with a coin or other flat

object.

Change the switch step by step by detaching and reusing the

object at the end of each step.

Right side

Left side

Angle adjustment switches

9090

0

45

90

0

45

Installation

angle

0°~5° 40°~50°

85°~90°

90

0

45

90

0

45

90

0

45

Angle

adjustment

switch

position

• It is not possible to install at an angle of

40°~50° if only 1 is used.

Installation of Display unit

■

• Installation without using the trim mount plate 7

Attach one velcro to the

slanted-line of the the display

units as shown above, and

attach the other velcro to the

parts where you wish to

attach the display units.

Then, put velcros together

and install the display units.

• Installation using the trim mount plate 7

Display unit

5

7

Pass the wire from the display unit through the hole on the

trim mount plate and push fit the display unit into the trim

mount plate until it locks.

• Be sure not to place the unit on such place as where it is

exposed to direct sunlight and temperature eventually rises.

It results in the deformation of the case.

• Depending on the installing location, the display unit may not

be able to receive the signals from the controller unit. Install

them after confirming that the signals can be received.

• Install the unit in such a way that it does not disturb driving.

2CAUTION

Installation

Installation Procedure

KDC-C521FM_C471FM_(KE)_U.S 2004.01.16 10:51 AM Page 18

— 19 —

Use the holes marked (¶) to install the unit.

Horizontal installation

■

Vertical installation

■

Bottom view

Side view

KDC-C521FM

90

0

45

90

0

45

90

0

45

90

0

45

90

0

45

90

0

45

90

0

45

90

0

45

90

0

45

90

0

45

90

0

45

90

45

0

2

3

φ

4

1

2

3

φ

4

1

Use the holes marked (¶) to install the unit.

In case of hanging in the trunk

■

Installation of FM modulator unit

■

90

0

45

90

0

45

9

0

4

5

Install the FM modulator unit beneath the front seat using

Metal fixture and Bind head screw as shown in the above

figure.

Take sufficient care so

that the wires are not

caught under the seat.

If they are caught, they

may break.

2CAUTION

φ

3

φ

4

2

3

1

6

KDC-C471FM

Bottom view

Side view

KDC-C521FM

KDC-C471FM

Bottom view

Side view

KDC-C521FM

KDC-C471FM

KDC-C521FM_C471FM_(KE)_U.S 2004.01.16 10:51 AM Page 19

— 20 —

English

To prevent fire when the ignition wire (Red) or battery wire

(Yellow) is short-circuited by coming into contact with the

vehicle chassis (ground), only connect the power supply after

making the fuse box connections.

Be sure to press the reset button after installation.

2CAUTION

2WARNING

Control output

Control input

CD auto-changer

Changer connection wire 4

FM modulator unit

FM/AM antenna input

FM/AM antenna output

Ground wire (Black)

- (To car chassis)

Car fuse box

ACC

Ignition key

switch

Antenna plug

for automobile

Output

Car stereo

with FM tuner

Battery

Display unit

Battery wire + (Yellow)

CD auto - changer input

Do not install an antenna of radio equipment or distribute the

antenna wire near the changer output wire, for this could

cause malfunction with this unit.

NOTE

Connecting Wires to Terminals

*8 & *9 : For the model of European Market.

Ignition wire

+ (Red)

*

8

*9

KDC-C521FM_C471FM_(KE)_U.S 2004.01.16 10:51 AM Page 20

La page charge ...

Kenwood KDC-C521FM - CD Changer With RF Modulator Manuel utilisateur

Ce manuel convient également à

Kenwood KDC-C521FM - CD Changer With RF Modulator Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents