Samsung FTQ386LWX Manuel utilisateur

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/global/register

Electric Range

user manual

FTQ386LWX

FTQ386LWX_XAC DG68-00105A.indb 1 2007-09-10 ¿ÀÈÄ 3:37:42

features of your new range

Enhanced convenience. Better cooking. Easy maintenance. Your new electric range has been designed to

bring you these beneﬁts and more.

The latest in heat-distribution technology

Other ranges with just one fan tend to make a swirl of heat that fails to cover the whole inside of

the oven. This means uneven heat distribution and uneven cooking. Your new range has Surround

Airvection™, which Samsung innovated by adding a third heating element and a multi-fan system

that circulates the heat evenly in all directions. You get more efﬁcient energy consumption and

more even cooking.

Steam Quick cleaning

Thanks to Steam Quick™, Samsung’s unique technology for light-duty cleaning jobs, keeping

your oven spick-and-span is a snap — no hassle, no odor, no chemicals. Steam Quick™ cleans

the inside of your range with high-temperature steam in just 20 minutes.

Bigger is better

With a capacity of 5.7 cubic feet, your new range is equipped with more space than any of its

competitors in the U.S. market. This means greater convenience for you when cooking for the

holidays or when entertaining.

A cooktop with 5 burners

Four main burners with two that dial heat up to different pot sizes.

A smaller warming burner in the center of the range top.

•

FTQ386LWX_XAC DG68-00105A.indb 2 2007-09-10 ¿ÀÈÄ 3:37:42

Important safety instructions _3

Read and follow all instructions before using your oven to prevent the risk of ﬁre, electric shock,

personal injury, or damage when using the range. This guide does not cover all possible conditions

that may occur. Always contact your service agent or manufacturer about problems that you do not

understand.

SAFETY SYMBOLS

WARNING: This symbol alerts you to hazards or unsafe practices that could cause

serious bodily harm or death.

CAUTION: This symbol alerts you to hazards or unsafe practices that could cause

bodily injury or property damage.

Do not attempt or use.

Do not disassemble.

Do not touch.

Follow directions explicity.

Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Note

ANTI-TIP DEVICE

To reduce the risk of tipping the range, the range must be secured by a properly installed Anti-Tip

device. Refer to the installation manual for instructions.

WARNING

ALL RANGES CAN TIP AND CAUSE INJURIES TO PERSONS

INSTALL THE ANTI-TIP DEVICE PACKED WITH RANGE

FOLLOW ALL INSTALLATION INSTRUCTIONS

Do not step, lean, or sit on the doors of the range. These can cause the range to tip,

resulting in burns or serious injuries.

Check to see that the Anti-Tip device is installed properly. Then grasp the top rear edge of the

range and carefully attempt to tilt it forward. Verify that the Anti-Tip device is engaged.

If you pull the range out from the wall for any reason, make sure the device is properly engaged

when you push the range back against the wall. If it is not, there is a possible risk of the range

tipping over and causing injury if you or a child stand, sit or lean on an open door.

important safety instructions

FTQ386LWX_XAC DG68-00105A.indb 3 2007-09-10 ¿ÀÈÄ 3:37:42

4_ Important safety instructions

FOR YOUR SAFETY

When using electrical appliances, basic safety precautions should be followed, including the

following:

Use this appliance only for its intended purpose as described in this Owner’s Manual.

Potentially hot surfaces include the cooktop, areas facing the cooktop, oven vent opening,

surfaces near the opening, crevices around the oven door.

Be sure your appliance is properly installed and grounded by a qualiﬁed technician.

Do not repair or replace any part of the appliance unless speciﬁcally recommended in the manual.

All other servicing should be referred to a qualiﬁed technician.

Always disconnect power to appliance before servicing by removing the fuse or switching off the

circuit breaker.

Do not enter inside the oven.

Do not store items of interest to children in cabinets above a range or on the back guard

of a range. Children climbing on the range to reach items could be seriously injured.

Do not leave children alone. Children should not be left alone or unattended in an area where

appliance is in use. They should never be allowed to sit or stand on any part of the appliance.

Never use your appliance for warming or heating the room.

Do not use water on grease ﬁres. Turn off the oven to avoid spreading the ﬂame. Smother the

ﬁre or ﬂame by closing the door or use dry chemical, baking soda, or foam-type extinguisher.

Storage in or on appliance. Flammable materials should not be stored in an oven or near

surface units. Be sure all packing materials are removed from the appliance before operating it.

Keep plastics, clothes, and paper away from parts of the appliance that may become hot.

Wear proper apparel. Loose-ﬁtting or hanging garments should never be worn while using the

appliance.

Use only dry potholders. Moist or damp potholders on hot surfaces may result in burns from

steam. Do not let the potholder touch hot heating elements. Do not use a towel or other bulky

cloth.

Teach children not to play with the controls or any other part of the range.

FTQ386LWX_XAC DG68-00105A.indb 4 2007-09-10 ¿ÀÈÄ 3:37:42

Important safety instructions _5

SURFACE COOKING UNITS

Never leave surface units unattended at high heat settings. Boilovers cause smoking and

greasy spillovers that may ignite.

Do not lift the cooktop. Lifting the cooktop can lead to damage and improper operation of the

range.

Do not operate the cooktop when there is no cookware. If the cooktop operates without a

cookware, the control knob will become hot.

Never use the glass cooktop surface as a cutting board.

Use care when touching the cooktop. The glass surface of the cooktop will retain heat after

the controls have been turned off.

Be careful when placing spoons or other stirring utensils on glass cooktop surface when

it is in use. They may become hot and could cause burns.

Use proper pan sizes. This appliance is equipped with surface units of different size. Select

utensils having ﬂ at bottoms large enough to cover the surface unit heating element. The use of

undersized utensils will expose a portion of the heating element to direct contact and may result in

ignition of clothing. Proper relationship of utensil to burner will also improve efﬁ ciency.

Glazed cooking utensils. Only certain types of glass, glass/ceramic, ceramic,earthenware,

or other glazed utensils are suitable for range-top service without breaking due to the sudden

change in temperature.

Utensil handles should be turned inward and not extend over adjacent surface units. To

reduce the risk of burns, ignition of ﬂ ammable materials, and spillage due to unintentional contact

with the utensil, the handle of a utensil should be positioned so that it is turned inward, and does

not extend over adjacent surface units.

Read and follow all instructions and warnings on the cleaning cream labels.

Be sure you know which control knob operates each surface unit. Make sure you turned on the

correct surface unit.

Always turn the surface units off before removing cookware.

When preparing ﬂ aming foods under the hood, turn the fan on.

Keep an eye on foods being fried at high or medium high heat settings.

APPLIANCE OUTLETS

The 120V appliance outlets located on the control console may be used to run portable

appliances placed on countertops beside the range.

The outlets operate independently and are not affected by range control settings.

Do not place portable appliances on the cooktop.

Damage to the portable appliance could result if

the cooktop is hot.

Circuit

Breakers

Appliance

Outlet

Appliance outlet circuit breakers: The circuit

breakers for the appliance outlets on your range

are located on top of the control console.They are

rated for 15 amps, that may trip if the appliance

plugged into it exceeds 15 amps. To reset the

circuit breaker, press the switch of located on the

control console.

If appliance outlet don’t operate, test out your small

portable appliance by plugging into other outlets.

FTQ386LWX_XAC DG68-00105A.indb 5 2007-09-10 ¿ÀÈÄ 3:37:43

6_ Important safety instructions

OVEN

DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACES OF THE OVEN. Heating

elements may be hot even though they are dark in color. Interior surfaces of an oven become

hot enough to cause burns. During and after use, do not touch or let clothing or other ﬂammable

materials contact heating elements or interior surfaces of oven until they have had sufﬁcient time

to cool. Other surfaces of the appliance may become hot enough to cause burns. Among these

surfaces are oven vent openings and surfaces near these openings, oven doors, and windows of

oven doors.

Do not heat unopened food containers. Build-up of pressure may cause container to burst

and result in injury.

Do not use the oven to dry newspapers. If overheated, they can catch on ﬁre.

Do not use the oven for a storage area. Items stored in an oven can ignite.

Use care when opening door. Let hot air or steam escape before you remove or replace food in

the oven.

Protective liners. Do not use aluminum foil to line the oven bottoms, except as suggested in the

manual. Improper installation of these liners may result in a risk of electric shock or ﬁre.

Keep oven vent ducts unobstructed. The oven vent is located above the right rear surface

unit. this area could become hot during oven use. Never block this vent and never place plastic or

heat-sensitive items on vent

Placement of oven racks. Always place oven racks in the desired location while the oven is

cool. If the rack must be moved while oven is hot, do not let the potholder come in contact with

the hot heating element in the oven.

Do not allow aluminum foil or meat probe to contact heating elements.

WARMING DRAWER

DO NOT TOUCH THE HEATING ELEMENT OR THE INTERIOR SURFACE OF THE

DRAWER. These surfaces may be hot enough to burn.

REMEMBER: The inside surface of the drawer may be hot when the drawer is opened.

The purpose of the warming drawer is to hold hot cooked foods at serving temperature.

Always start with hot food; cold food cannot be heated or cooked in the warming drawer.

Use care when opening the drawer. Open the drawer a crack and let hot air or steam escape

before removing or replacing food. Hot air or steam which escapes can cause burns to hands,

face and/or eyes.

Do not use the drawer to dry newspapers. If overheated, they can catch on ﬁre.

Do not use aluminum foil to line the drawer. Foil is an excellent heat insulator and will trap

heat beneath it. This will upset the performance of the drawer and it could damage the interior

ﬁnish.

Do not leave paper products, plastics, canned food or combustible materials in the drawer.

Never leave jars or cans of fat drippings in or near your drawer.

Do not warm food in the drawer for more than three hours.

FTQ386LWX_XAC DG68-00105A.indb 6 2007-09-10 ¿ÀÈÄ 3:37:43

Important safety instructions _7

SELF-CLEANING OVENS

Do not clean door gasket. The door gasket is essential for a good seal. Care should be taken

not to rub, damage, or move the gasket.

Never keep pet birds in the kitchen. The health of birds is extremely sensitive to the fumes

released during an oven self-clean cycle. Fumes may be harmful or fatal to birds. Move birds to a

well-ventilated room.

Clean in the self-clean cycle only parts listed in this manual. Before self-clean the oven,

remove the broil pan , rack, utensils, and food.

No commercial oven cleaner or oven liner protective coating of any kind should be used in or

on the outside of the oven. Use only a ceramic cooktop cleaner or the cleaner supplied with this

appliance on the glass cooktop.

Nickel oven shelves should be removed from the oven before beginning the self-cleaning cycle, or

they may discolor.

If the self-clean mode malfunctions, turn the oven off and disconnect the power supply. Have it

serviced by a qualiﬁed technician.

VENTILATING HOOD

Clean ventilating hoods frequently. Grease should not be allowed to accumulate on the hood

or ﬁlter.

When ﬂaming foods under the hood, turn the fan on.

GLASS/CERAMIC COOKING SURFACES

DO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS. Surface units may be hot even

though they are dark in color. Areas near surface units may become hot enough to cause burns.

During and after use, do not touch, or let clothing or other ﬂammable materials contact surface

units or areas near units until they have had sufﬁcient time to cool. Among these areas are the

cook-top and facing the cook-top.

Do not cook on broken cooktop. If cooktop should break, cleaning solutions and spillovers

may penetrate the broken cook-top and create a risk of electric shock. Contact a qualiﬁed

technician immediately.

Clean cooktop with caution. If a wet sponge or cloth is used to wipe spills on a hot cooking

area, be careful to avoid steam burn. Some cleaners can produce noxious fumes if applied to a

hot surface.

BEFORE YOU BEGIN

Clean the oven thoroughly before using for the ﬁrst time. Remove accessories and operate

the oven at the bake setting at 400°F for 1 hour before using. There will be a distinctive odor; this

is normal, but ensure your kitchen is well ventilated during this conditioning period.

FTQ386LWX_XAC DG68-00105A.indb 7 2007-09-10 ¿ÀÈÄ 3:37:43

8_ Contents

contents

INTRODUCING YOUR NEW RANGE

9

9 Overview

9 What’s included with your range

SURFACE COOKING

10

10 About surface cooking

12 How to set the appliance for surface

cooking

15 Using the proper cookware

15 Choosing the proper cookware

16 Protecting the smoothtop surface

USING THE WARMING DRAWER

17

17 About the warming drawer

18 Turning the warming drawer on or off

OPERATING THE OVEN

19

19 The oven control panel

20 Setting the clock

21 Minimum and maximum settings

21 Setting the kitchen timer

22 Using the oven racks

23 Baking

24 Convection baking

26 Convection roasting

28 Timed cooking

29 Delay timed cooking

30 Broiling

32 Using the custom cook feature

33 Proong

34 Using the keep warm function

34 Turning the oven light on and off

35 Extra features

MAINTAINING YOUR APPLIANCE

39

39 Self-cleaning

41 Steam-cleaning

42 Care and cleaning of the oven

44 Care and cleaning of the glass cooktop

46 Removing and replacing the oven door

47 Removing and replacing the warming

drawer

48 Changing the oven light

TROUBLESHOOTING

49

49 Troubleshooting

WARRANTY

53

FTQ386LWX_XAC DG68-00105A.indb 8 2007-09-10 ¿ÀÈÄ 3:37:43

01 INTRODUCING

Introducing your new range _9

OVERVIEW

WHAT’S INCLUDED WITH YOUR RANGE

Wire racks Broil pan Broil pan insert Cleaner &

cleaning pad

introducing your new range

Warming drawer

Oven door

Convection fan

Shelf position

Glass surface

Automatic oven

light switch

Oven light

Self/steam clean latch

Gasket

Oven control panel

See page 19 for more

information

Surface control knobs

See page 11 for more

information

FTQ386LWX_XAC DG68-00105A.indb 9 2007-09-10 ¿ÀÈÄ 3:37:45

10_ Surface cooking

surface cooking

ABOUT SURFACE COOKING

CAUTION

BEFORE COOKING

Do not use the glass cooktop surface as a cutting board.

Do not place or store items that can melt or catch ﬁre on the glass cooktop, even

when it is not being used.

Turn the surface units on only after placing the cookware.

Do not store heavy items above the cooktop surface. They could fall and damage it.

•

CAUTION

DURING COOKING

Do not place aluminum foil or plastic items such as salt and pepper shakers, spoon

holders, or plastic wrappings on the range when it is in use. The hot air from the vent

could melt plastics or ignite ﬂammable items.

Make sure the correct surface unit is turned on.

Never cook directly on the glass. Always use cookware.

Always place the pan in the center of the surface unit you are cooking on.

Never leave surface units unattended while using a high heat setting. Boilovers cause

smoking and greasy spillovers that may catch on ﬁre.

Turn the surface units off before removing cookware.

Do not use plastic wrap to cover food. Plastic may melt onto the surface and be very

difﬁcult to remove.

•

CAUTION

AFTER COOKING

Do not touch the surface units until they have cooled down.

The surface may be still be hot and burns may occur if the glass surface is touched

before it has cooled down sufﬁciently.

Immediately clean spills on the cooking area to prevent a tough cleaning chore later.

If cabinet storage is provided directly above the cooking surface, make sure that the

items are infrequently used and can be safely stored in an area subjected to heat.

Temperatures may be unsafe for items such as volatile liquids, cleaners or aerosol

sprays.

•

About the radiant surface elements

The temperature rises gradually and evenly. As the temperature rises, the radiant element will glow

red. To maintain the selected setting, the element will cycle on and off. The heating element retains

enough heat to provide a uniform and consistent heat during the off cycle. For efﬁcient cooking,

turn off the element several minutes before cooking is complete. This will allow residual heat to

complete the cooking process.

Radiant elements have a limiter that allows the element to cycle ON and OFF, even at the HI

setting. This helps to prevent damage to the ceramic cooktop. Cycling at the HI setting is

normal and can occur if the cookware is too small for the radiant element or if the cookware

bottom is not ﬂat.

FTQ386LWX_XAC DG68-00105A.indb 10 2007-09-10 ¿ÀÈÄ 3:37:45

02 SURFACE COOKING

Surface cooking _11

Location of the radiant surface elements and controls

The radiant control knobs operate the radiant surface elements on the cooktop as shown below.

1

6

5 2

4

3

1. Single element: Left rear

2. Single element: Right rear

3. Dual element: Left front

4. Triple element: Right front

5. Warming center: Center rear

6. Hot surface indicator

Hot surface indicator

Comes on when the unit is turned on or hot to the touch.

Stays on even after the unit is turned off.

Glows until the unit is cooled to approximately 150°F.

•

Cooking areas

The cooking areas on your range are identiﬁ ed by permanent circles on the glass cooking

surface. For the most efﬁ cient cooking, ﬁ t the pan size to the element size.

Pans should not extend more than ½” to 1” beyond the cooking area.

When a control is turned on, a glow can be seen through the glass cooking surface. The

element will cycle on and off to maintain the preset heat setting, even at high settings.

For more information on selecting proper types of cookware, refer to the section “Using the

proper cookware” on page 15.

•

FTQ386LWX_XAC DG68-00105A.indb 11 2007-09-10 ¿ÀÈÄ 3:37:46

12_ Surface cooking

HOW TO SET THE APPLIANCE FOR SURFACE COOKING

CAUTION

The surface elements may be hot and burns may occur. Do not touch surface

elements until they have cooled down sufﬁciently.

At high or medium-high settings, never leave food unattended. Boilovers cause

smoking and greasy spillovers may catch on ﬁre.

Be sure you turn the control knob to OFF when you ﬁnish cooking.

•

Single surface unit control knob (left rear, right rear)

1. Push the knob in.

2. Turn in either direction to the setting you want.

At both the off and high settings, the knob clicks into

position.

•

Dual surface unit control knob (left front)

The dual surface unit has 2 cooking sizes to select from

so you can match the size of the unit to the size of the

cookware you are using.

1. Push the knob in.

2. Turn in either direction to the setting you want.

To use the small surface unit, turn the control knob to

the small burner (A) settings.

To use the large surface unit, turn the control knob to

the large burner (B) settings.

•

CAUTION

The area between the high and off settings, are not appropriate for cooking.

FTQ386LWX_XAC DG68-00105A.indb 12 2007-09-10 ¿ÀÈÄ 3:37:46

02 SURFACE COOKING

Surface cooking _13

Triple surface unit control knob (right front)

The dual surface unit has 3 cooking sizes to select from

so you can match the size of the unit to the size of the

cookware you are using.

1. Push the knob in.

2. Turn in either direction to the setting you want.

To use the small surface unit, turn the control knob to

the small burner (A) settings.

To use the middle surface unit, turn the control knob to

the middle burner (B) settings.

To use the large surface unit, turn the control knob to

the large burner (C) settings.

•

CAUTION

The area between the high and off settings, are not appropriate for cooking.

When changing from a high heat setting to a lower heat setting, the surface unit may stop

glowing. This is normal.

Recommended settings

SETTING TYPE OF COOKING

HIGH Starting most foods, bringing water to a boil, pan broiling

MEDIUM HIGH Continuing a rapid boil, frying, deep fat frying

MEDIUM Maintaining a slow boil, thickening sauces and gravies, steaming

vegetables

MEDIUM LOW Keeping foods cooking, poaching, stewing

LOW Keeping warm, melting, simmering

FTQ386LWX_XAC DG68-00105A.indb 13 2007-09-10 ¿ÀÈÄ 3:37:47

14_ Surface cooking

Using the warming center

The warming center, located in the back center of the glass surface, will keep hot, cooked food

at serving temperature.

CAUTION

Do not warm food on the warming center for more than two hours.

Use only cookware and dishes recommended as safe for oven and cooktop use.

Always use potholders or oven mitts when removing food from the warming center as

cookware and plates will be hot.

When warming pastries and breads the cover should have an opening to allow

moisture to escape.

Do not use plastic wrap to cover foods. Plastic may melt onto the surface and be very

difﬁ cult to clean.

Food should be kept in its container and covered with a lid or aluminum foil to

maintain food quality.

Always start with hot food. Eating uncooked or cold food placed on the warming

center could result in illness.

•

1. Turn the warming center on.

Press the WARMING CENTER ON/OFF pad.

2. Select the power setting you want.

Pressing the WARMING CENTER LEVEL pad once will set it to

the level 1 setting. Press the pad twice for the level 2 setting, 3

times for level 3.

3. Turn the warming center off.

Press the WARMING CENTER ON/OFF pad.

Pressing the CLEAR/OFF pad does not turn the warming center off.

The surface warmer will not glow red like the cooking elements.

For best results, all foods on the warming center should be covered with a lid or

aluminum foil. When warming pastries or breads, the cover should be vented to allow

moisture to escape.

•

Recommended settings

LEVEL TYPE OF FOOD

1 Breads/pastries, casseroles, gravies, eggs

2 Dinner plate with food, soups (cream), vegetables, sauces, stews, meats

3 Fried foods, soups (liquid), hot beverages

FTQ386LWX_XAC DG68-00105A.indb 14 2007-09-10 ¿ÀÈÄ 3:37:47

02 SURFACE COOKING

Surface cooking _15

USING THE PROPER COOKWARE

Using the right cookware can prevent many problems, such as uneven cooking or extended

cooking times. Using the proper pans will reduce cooking times and cook food more evenly.

Check for ﬂ atness by

rotating a ruler across the

bottom of the cookware.

CORRECT INCORRECT

Flat bottom and straight sides.

Tight ﬁ tting lids.

Weight of handle does not tilt

pan.

Pan is well balanced.

Pan size matches the amount

of food to be prepared

and the size of the surface

element.

Made of a material that

conducts heat well.

Always match pot diameter to

element surface diameter.

•

Curved and warped pan

bottoms.

Pan overhangs element by more

than one-half inch.

Pan is smaller than element.

Heavy handle tilts pan.

CHOOSING THE PROPER COOKWARE

What your cookware is made of determines how evenly and quickly heat is transferred from the

surface element to the pan bottom.

ALUMINUM - Excellent heat conductor. Some types of food will cause the aluminum to

darken. (Anodized aluminum cookware resists staining & pitting.). If aluminum pans are slid

across the ceramic cooktop, they may leave metal marks that resemble scratches. Remove

these marks immediately.

COPPER - Excellent heat conductor but discolors easily. May leave metal marks on ceramic

glass (see above).

STAINLESS STEEL - Slow heat conductor with uneven cooking results. Is durable, easy to

clean and resists staining.

CAST IRON - A poor conductor; retains heat very well. Cooks evenly once cooking

temperature is reached. Not recommended for use on ceramic cooktops.

ENAMELWARE - Heating characteristics will vary depending on base material. Porcelain-

enamel coating must be smooth to avoid scratching ceramic cooktops.

GLASS - Slow heat conductor. Not recommended for ceramic cooktop surfaces because it

may scratch the glass.

•

FTQ386LWX_XAC DG68-00105A.indb 15 2007-09-10 ¿ÀÈÄ 3:37:48

16_ Surface cooking

PROTECTING THE SMOOTHTOP SURFACE

Cleaning

Clean the cooktop before using it for the ﬁrst time.

Clean your cooktop daily or after each use. This will keep your cooktop looking good and can

prevent damage.

If a spillover occurs while cooking, immediately clean the spill from the cooking area while it is

hot to prevent a tough cleaning chore later. Using extreme care, wipe the spill with a clean dry

towel.

Do not allow spills to remain on the cooking area or the cooktop trim for a long period of time.

Do not use abrasive cleansing powders or scouring pads, which will scratch the cooktop.

Do not use chlorine bleach, ammonia, or other cleansers not speciﬁcally recommended for use

on a glass-ceramic surface.

Preventing marks and scratches

Do not use glass cookware. They may scratch the cooktop.

Do not place a trivet or wok ring between the cooktop and the pan. These items can mark or

scratch the cooktop.

Make sure the cooktop and the pan bottom are clean.

Do not slide metal pans across the cooktop.

Preventing stains

Do not use a soiled dish cloth or sponge to clean the cooktop surface. A ﬁlm will remain, which

may cause stains on the cooking surface after the area is heated.

Continuously cooking on a soiled surface may/will result in a permanent stain.

Preventing other damage

Do not allow plastic, sugar, or foods with high sugar content to melt onto the hot cooktop.

Should this happen, clean immediately.

Do not let a pan boil dry as this will damage the cooktop. and the pan.

Do not use the cooktop as a work surface or cutting board.

Do not cook food directly on the cooktop without the proper cookware.

•

FTQ386LWX_XAC DG68-00105A.indb 16 2007-09-10 ¿ÀÈÄ 3:37:48

Using the warming drawer _17

03 WARMING DRAWER

using the warming drawer

ABOUT THE WARMING DRAWER

The warming drawer will keep hot,

cooked foods warm. Always start with hot

food. Do not use to heat cold food other

than crisping crackers, chips or dry cereal.

Allow approximately 25 minutes for the

warming drawer to preheat.

Do not line the warming drawer or pan with aluminum foil. Foil is an excellent heat

insulator and will trap heat beneath it. This will upset the performance of the drawer

and could damage the interior ﬁnish.

Do not put liquid or water in the warming drawer.

All foods placed in the warming drawer should be covered with a lid or aluminum foil. When

warming pastries or breads, the cover should be vented to allow moisture to escape.

Remove serving spoons, etc., before placing containers in the warming drawer.

Food should be kept hot in its cooking container or transferred to a heat-safe serving dish.

CAUTION

Plastic containers or plastic wrap will melt if in direct contact with the drawer, pan or a

hot utensil. Melted plastic may not be removable and is not covered under your warranty.

•

FTQ386LWX_XAC DG68-00105A.indb 17 2007-09-10 ¿ÀÈÄ 3:37:48

18_ Using the warming drawer

TURNING THE WARMING DRAWER ON OR OFF

1. Set the warming drawer to the heat level you want.

Press the WARMING DRAWER pad once for low, twice for

medium, or 3 times for high.

The warming drawer starts automatically once you have ﬁ nished

selecting the level you want.

2. Turn the warming drawer off.

Press the WARMING DRAWER pad when the warming level is

high.

Pressing the CLEAR/OFF pad does not turn the warming drawer off.

The warming drawer cannot be used during a self-cleaning cycle.

•

Recommended settings

LEVELS TYPE OF FOOD

Low Rolls (soft), empty dinner plates

Medium

Gravies, eggs, biscuits, pastries, casseroles, vegetables, rolls (hard),

roasts (beef, pork, lamb)

High Bacon, poultry, pizza, hamburger patties, pork chops, fried foods

Different types of food may be placed in the warming drawer at the same time. For best

results, do not leave foods in the warming drawer for longer than 1 hour. Do not leave

smaller quantities or heat-sensitive foods, such as eggs, for longer than 30 minutes.

The warming drawer will shut off automatically after 3 hours.

•

FTQ386LWX_XAC DG68-00105A.indb 18 2007-09-10 ¿ÀÈÄ 3:37:49

Operating the oven _19

04 OPERATING THE OVEN

operating the oven

THE OVEN CONTROL PANEL

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use

of your oven, become familiar with the various features and functions of the oven as described

below. Detailed instructions for each feature and function follow later in this user manual.

17 18 1

3456789101112

13

14

15

16

2

1. DISPLAY: Shows the time of day, oven temperature, whether the oven is in the bake, broil or

self-cleaning mode, and the times set for the timer or automatic oven operations.

2. NUMBER PADS: Use to set any function requiring numbers such as the time of day on the

clock, the timer, the oven temperature, the start time and length of operation for timed baking.

3. SET/START: Must be pressed to start any cooking or cleaning function.

4. CLEAR/OFF: Press to cancel all oven operations except the clock and timer, warming center,

warming drawer.

5. KITCHEN TIMER ON/OFF: Press to select the timer feature.

6. DELAY START: Use along with Bake, Conv. Bake, Conv. Roast, Cooking Time, and Self

Clean pads to set the oven to start and stop automatically at a time you set.

7. COOKING TIME: Press and then use the number pads to set the amount of time you want

your food to cook. The oven will shut off when the cooking time has run out.

8. CLOCK AM/PM: Press to set the time of day.

9. OVEN LIGHT: Press to turn the oven light on or off.

10. CUSTOM COOK: Press to record and recall your favorite recipe setting.

11. SELF CLEAN: Press to select self-cleaning function.

12. STEAM CLEAN: Press to select steam-cleaning function.

13. PROOF: Press to select a warm environment useful for rising yeast-leavened products.

14. KEEP WARM: Press to keep cooked foods warm.

15. BROIL: Press to select the broil function.

16. BAKE: Press to select the bake function.

17. CONVECTION BAKE: Press to select baking with the convection function.

18. CONVECTION ROAST: Press to select roasting with the convection function.

FTQ386LWX_XAC DG68-00105A.indb 19 2007-09-10 ¿ÀÈÄ 3:37:49

20_ Operating the oven

SETTING THE CLOCK

The clock must be set to the correct time of day for the automatic oven timing functions to work

properly.

The time of day cannot be changed during a timed cooking, a delay-timed cooking or a self-

cleaning cycle.

You can choose between a 12-hour or 24-hour display. The default is 12-hour.

How to set the clock

1. Start the set up.

Press the CLOCK AM/PM pad.

2. Select AM or PM.

Press the CLOCK AM/PM pad again, once to select AM or twice

to select PM.

This step is skipped in the 24-hours display mode.

3. Enter the present time.

Enter the current time in hours and minutes on the number pad,

eg. 1, 3, 0, for 1:30.

4. Exit the set up.

Press the SET/START or CLOCK AM/PM pad.

How to change between a 12-hour and 24-hour display

1. Start the set up.

Press CLOCK AM/PM and 0 on the number pad at the same

time for 3 seconds.

The display will show the present mode (eg. 12 hour).

2. Select the display mode you want.

Press 0 on the number pad to select 12 hour or 24 hour.

Pressing 0 on the number pad changes the display between 12

hour and 24 hour.

3. Exit the set up.

Press the SET/START pad.

•

FTQ386LWX_XAC DG68-00105A.indb 20 2007-09-10 ¿ÀÈÄ 3:37:50

La page est en cours de chargement...

Samsung FTQ386LWX Manuel utilisateur

Samsung FTQ386LWX Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents