Maytag BRAVOS Mode d'emploi

Catégorie
Machines à laver
Taper
Mode d'emploi

Ce manuel convient également à

NIAYI'AG ®
BRAVOS-fMAUTOMATIC WASHER
USE & CARE GUIDE
LAVEUSE AUTOMATIQUE BRAVOS -fM
GUIDE D'UTILISATION ET D'ENTRETIEN
FOR QUESTIONS ABOUT FEATURES, OPERATION/PERFORMANCE,
PARTS, ACCESSORIES OR SERVICE CALL: 1.800.688.9900
IN CANADA, CALl: 1.800.807.6777
VISIT OUR WEBSfEE AF WWW.MAYTAG.COM
IN CANADA, WWW.MAY fAG.CA
AU CANADA, POUR ASSIS EANCE, INSTAl LATION OU SERVICE,
COMPOSER EE : 1.800.807.6777
OU VISIfER NOTRE SIfE INTERNEI
WWW.MAY lAG .CA
PARA OBTENER ACCESO AE MANUAl DE USO Y CUIDADO EN ESPANO[, O PARA OBTENER INFORMACION ADICIONAL ACERCA DE SU PRODUCTO, VISITE: WWW.MAYTAG.COM.
11_NGA I IS10 SU NOMERO DE MODELO COMPI ETO. PODR, g, ENCONTRAR EL NLOMERO DE MODEl O Y DE SERIE EN I A ETIQUETA UBICADA DEBAJO DE LA TAPA DE LA I AVADORA.
W10092756A
TABLE OF CONTENTS
WASHER SAFETY...................................................................................................................... 3
INSTALLATION REQUIREMENTS............................................................................................. 4
Tools and Parts....................................................................................................................... 4
kocation Requirements ........................................................................................................... 5
[])rain System.......................................................................................................................... 6
Electrical Requirements .......................................................................................................... 6
INSTALLATION INSTRUCTIONS ............................................................................................. 7
Before You Start ..................................................................................................................... 7
Remove Shipping Baseand Packing Ring .............................................................................. 7
Connect [_brainHose .............................................................................................................. 8
Connect the Inlet Hoses ......................................................................................................... 8
Secure the Drain Hose ......................................................................................................... 10
level the Washer.................................................................................................................. 10
Complete Installation ........................................................................................................... 11
BENEFITSAND FEATURES...................................................................................................... 11
Benefits ................................................................................................................................ 11
Features................................................................................................................................ 12
WASHER USE.......................................................................................................................... 13
Starting Your Washer ........................................................................................................... 1_
Using the Proper Detergent .................................................................................................. 1
Pausing or Restarting the Washer ......................................................................................... 14
Stopping the Washer ............................................................................................................ 15
Changing Cycles, Modifiers and Options ............................................................................. 15
Status Lights.......................................................................................................................... 15
Cycles .................................................................................................................................. 15
Modifiers .............................................................................................................................. 17
Options ................................................................................................................................ 18
Operati ng Controls ............................................................................................................... 18
Normal Sounds .................................................................................................................... 19
LAUNDRY TIPS....................................................................................................................... 19
WASHER CARE........................................................................................................................ 20
Cleaning Your Washer ......................................................................................................... 20
Water Inlet Hoses................................................................................................................. 20
Vacation, Storage and Moving Care ..................................................................................... 20
TROUBLESHOOTING ............................................................................................................. 21
Washer and Components ..................................................................................................... 21
Washer Operation ................................................................................................................ 25¢
Clothing Care ....................................................................................................................... 24
ASSISTANCEOR SERVICE....................................................................................................... 26
In the U.S.A.......................................................................................................................... 26
In Canada ............................................................................................................................. 26
Accessories .......................................................................................................................... 26
WARRANTY ............................................................................................................................ 27
TABLE DES MATIERES
S[_CURIT[_DE LA LAVEUSE..................................................................................................... 28
EXIGENCESD'INSTALLATION ............................................................................................... 29
Outillage et pi_ces ............................................................................................................... 29
Exigences d'emplacement .................................................................................................... 30
Syst_'mede vidange .............................................................................................................. 31
Specifications _lectriques ..................................................................................................... 31
INSTRUCTIONS D'INSTALLATION ....................................................................................... 32
Awmt de commencer ........................................................................................................... 32
Retrait de la base d'exp(!dition et de I'anneau d'emballage .................................................. 33
Raccordement du tuyau de vidange ..................................................................................... 33
Raccordement des tuyaux d'alimentation ............................................................................ 34
[mmobilisation du tuyau de vidange .................................................................................... 35
R6glage de I'aplomb de la laveuse ....................................................................................... 36
Achever I'installation ............................................................................................................ 37
AVANTAGES ET CAI_CTi_RISTIQUES ................................................................................... 37
Avantages ............................................................................................................................. 37
Caract_ristiques .................................................................................................................... 38
UTILISATION DE LA LAVEUSE............................................................................................... 39
Mise en marche de la laveuse.............................................................................................. 39
Utilisation du d6tergent appropri6 ........................................................................................ 39
Pauseou remise en marche de la laveuse ............................................................................ 41
Arr&t de la laveuse................................................................................................................ 41
Changement des programmes, modificateurs et options ...................................................... 41
T_moins lumineux ................................................................................................................ 41
Programmes ......................................................................................................................... 42
Modificateurs ....................................................................................................................... 44
Options ................................................................................................................................ 45
Fonctionnement des commandes ......................................................................................... 46
Sons normaux ...................................................................................................................... 46
CONSEILS DE LESSIVAGE....................................................................................................... 46
ENTRETIENDE LA LAVEUSE................................................................................................... 47
Nettoyage de la laveuse ....................................................................................................... 47
Tuyaux d'arriv_e d'eau ......................................................................................................... 47
Precautions _ prendre aw_nt les vacances, un entreposage ou un d_m6nagement ............... 47
DI_PANNAGE .......................................................................................................................... 49
[a laveuse et sescomposants ............................................................................................... 49
Fonctionnement de la laveuse.............................................................................................. 51
Soin des v6tements............................................................................................................... 52
ASSISTANCE OU SERVICE...................................................................................................... 54
Aux Etats-Unis ...................................................................................................................... 54
Au Canada ........................................................................................................................... 54
Accessoi res........................................................................................................................... 54
GARANTIE ............................................................................................................................... 55
2 ii__i_iii¸iiiiiiiiiiiiiiiiiiiiiii!i!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_ii!ii:iiiiiiii:ii:iiiiiiii!iii!iiiiliiiiiiii!!iiii:iiiiiili%!i!i!iii_!iiiiiiiiiiiiii:iillill:!iiiiii_iiiii
ili;il¸17171¸¸III¸17171¸¸III¸17171¸¸III¸I¸,!i{{7_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!iiii_!i_!!ii_ii_!_!_!_!_!_!_!_!_!_!_!_!_!_!7!i!ii!7_!_]i!!_7_!_);_!__i_ bi_i_1i_7_7iii7!!!_ii7iiiiiiiiiiiiiiiiiiiiiiiii_!_i_ii7iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_!t7t7ttt7t7ttt7t7ttt!_!_!::!;7
WASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
S_
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer follow basic precautions,
including the following:
Read all instructions before using the washer.
Do not wash articles that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or
explode.
Do not add gasoline, dry-cleaning solvents, or other
flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has not been
used for such a period, before using the washing
machine, turn on all hot water faucets and let the water
flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during
Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is used
near children.
Before the washer is removed from service or discarded,
remove the door or lid.
Do not reach into the washer if the drum, tub or agitator is
moving.
Do not install or store the washer where it will be exposed to
the weather.
Do not tamper with controls.
Do not repair or replace any part of the washer or attempt any
servicing unless specifically recommended in this manual or in
published user-repair instructions that you understand and
have the skills to carry out.
See "Electrical Requirements" for grounding instructions.
this time.
SAVE THESE INSTRUCTIONS
INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation. ]he parts supplied are in the
washer basket.
Tools needed for connecting the drain hose and water inlet hoses:
Pliers that open to I9/16'' (3.95 cm) Flashlight (optional)
NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record hose
installation or replacement dates for future reference.
4
Partssupplied:
A B C
A. Drain hose form
B. Water inlet hoses (2)
C. flat water inlet hose washer_ (4)
D. Beaded tie strap
Tools needed for securing the drain hose and leveling the washer:
Adjustable or open end wrench %s" (14 ram) Wood block
level Ruler or measuring tape
Alternate Parts
Your installation may require additional parts. [f you are interested in purchasing one of the
items listed here, call the toll-free number on the cover or in the "Assistance or Service"
section.
If Yuu Have: Yuu Will Need to Buy:
I.aundry tub or standpipe Sump pump system (if not already available)
taller than 96" (2.4 m)
1" (2.5 cm) diameter 2" (5 cm) diameter to 1" (2.5 cm) diameter standpipe
standpipe adapter, Part Number 3363920 and connector kit Part
Number 285835
Overhead sewer Standard 20 gal. (76 I.) 39" (99 cm) tall drain tub or utility
sink, sump pump and connectors (available from local
plumbing suppliers)
Floor drain Siphon break, Part Number 2858_;4; additional drain hose,
Part Number 8318155 and connector kit,
Part Number 285835
Water faucets beyond reach 2 longer water fill hoses:
of fill hoses 6 fl (1.8 m) Part Number 76314,
10 ft (3.0 m) Part Number 350008
lint clogged drain [Drain protector, Part Number 367031
Selecting the proper location for your washer improves performance and minimizes noise and
possible washer "walk."
Your washer can be installed in a basement, laundry room, closet, or recessed area. See
"Drain System."
IMPORTANT: Do not install or store the washer where it will be exposed to the weather.
Proper installation is your responsibility.
You will need:
A water heater set to deliver 120°F (49°C) water to the washer.
A grounded electrical outlet located within 4 ft (1.2 m) of where the power cord is
attached to the back of the washer. See "Electrical Requirements."
Hot and cold water faucets located within 3 ft (90 cm) of the hot and cold water fill
valves, and water pressure of 20-100 psi (138-690 kPa) for best performance.
A level floor with a maximum slope of 1" (2.5 cm) under entire washer. Installing the
washer on carpeting is not recommended.
A sturdy floor to support the washer weight (washer, water and load) of 315 Ibs (143 kgs).
Do not store or operate your washer in teml)eratures at or below 32OF (OoC). Some water can i:i'i
remain in the washer and can cause damage in low temperatures. See "Washer Care" for
information on winterizing. ....
Installation spacing for recessed area and closet installations
The following spacing dimensions arc recommended for this washer. This washer has been
tested for installation with spacing of 0" (0 cm) clearance on the sides. Recommended
spacing should be considered for the following reasons:
Additional spacing should be considered for ease of installation and servicing.
Additional spacing should be considered on all sides of the washer to reduce noise transfer.
For closet installation with a door, minimum ventilation openings in the top and bottom of
the door are required. [ ouvered doors with equivalent ventilation openings are acceptable.
Companion appliance spacing should also be considered.
3"*
17,,*_-
(43.2c_.
n
olo
tM, I1,t_,t_ _lTI] in_*
(310cm_)
24in=.2*
(165 cm )
2.9crn 69.9cm (2.5 cm)(2,6 cm)(68,6 cm) (12,7 cm)
A B
-- q7.60_)
3,,,
(7.6cm)
--7
A. Front view B. Side view C. Closet door with w_nts
*Required spacing
.... 5
121"i] II'I ])_ ;,:,_fll'_
The washer can be installed using the standpipe drain system (floor or wall), the laundry tub
drain system, or the floor drain system. Select the drain hose installation method you need.
See "Fools and Parts."
Standpipe drain system--wall or floor (views A & B)
The standpipe drain requires a minimum diameter standpipe of 2" (5 cm). The minimum
carry-away capacity can be no less than 17 gal. (64 I.) per minute. A 2" (5 cm) diameter to
1" (2.5 cm) diameter standpipe adapter kit is available. See "lools and Parts."
The top of the standpipe must be at least 39" (99 cm) high and no higher than 96" (244 cm/
from the bottom of the washer.
39"
(99 cm)
Laundry tub drain system (view C)
lhe laundry tub needs a minimum 20 gal. (76 [.) capacity. The top of the laundry tub must be
at least 39" (99 cm) above the floor and no higher than 96" (244 cm) from the bottom of the
washer.
Floor drain system (view D)
The floor drain system requires a siphon break that may be purchased separately. See "Fools
and Parts."
The siphon break must be a minimum of 28" (7I cm) from the bottom of the washer.
Additional hoses might be needed.
C
I!!I0(.i I'I(] i[II
I _, /,[ //,/tf I ¢#,[ I 1,[ /_ _
i
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. A time-
delay fuse or circuit breaker is recommended. [t is recommended that a separate circuit
serving only this appliance be provided.
This washer is equipped with a power supply cord having a grounded 3 prong plug.
lo minimize possible shock hazard, the cord must be plugged into a mating, grounded
3 prong outlet, grounded in accordance with local codes and ordinances. If a mating
outlet is not available, it is the personal responsibility and obligation of the customer to
have the properly grounded outlet installed by a qualified electrician.
[f codes permit and a separate ground wire is used, it is recommended that a qualified
electrician determine that the ground path is adequate.
Do not ground to a gas pipe.
6
Checkwithaqualifiedelectricianifyouarenot sure the washer is properly grounded.
Do not have a fuse ill the neutral or ground circuit.
GROUNDING INSTRUCTIONS
For a grounded, cord-connected washer:
This washer must be grounded. In the event of a malfunction
or breakdown, grounding will reduce the risk of electrical
shock by providing a path of least resistance for electric
current. This washer is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local
codes and ordinances.
WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in
doubt as to whether the appliance is properly grounded.
Do not modify the plug provided with the appliance - if it will
not fit the outlet, have a proper outlet installed by a qualified
electrician.
For a permanently connected washer:
This washer must be connected to a grounded metal,
permanent wiring system, or an equipment grounding
conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on
the appliance.
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
NOTE: [o avoid floor damage during installation, set the washer onto cardboard before
moving across floor.
IMPORTANT:
Be sure the foam shipping base has been removed from the bottom of the washer as
directed in the Unpacking Instructions.
If foam shipping base has not been removed, be sure lid is secured with tape before laying
washer on its back.
Removing the foam shipping base is necessary for proper operation.
t. Place cardboard supports from shipping carton on floor behind washer for support.
2. Secure the lid with tape.
3. Using 2 or more people, tip the washer onto its back and place on cardboard supports.
4. Remove foam shipping base.
5. Set washer upright.
6. Remove tape from lid. Open lid and remove foam packing ring from washer tub. Keep
foam packing ring in case you need to move the washer in the future.
F_
Proper connection of the drain hose protects your floors from damage due to water leakage,
Read and follow these instructions.
The drain hose is connected to your washer and is stored inside the washer cabinet.
J |,
Remove drain hose from washer cabinet
Pull the corrugated drain hose out of tile washer by first grabbing tile pull tie. Continue to pull
the hose until the end emerges. Do not force excess drain hose back into the rear of the
washer.
Laundry tub drain or standpipe drain
Connecting the drain bose form to the corrugated drain hose
1 (l_cm)
A. Drain hose reliefg
1. ff'ed end of drain hose into one end of form. Place end of drain hose
forrn into the drain hose relief.
2. Bend the hose over the top of the form and feed into the other end of
the form. Attach the other end of the form into the other drain hose
relief, lhe hose must extend 41/_" f l 1.4 cm) beyond the form.
To keep drain water from going back into the washer:
E)o not force excess drain hose into standl)ipe. Hose should be secure but loose enough
to provide a gap for air.
Do not lay excess hose on the bottom of the laundry tub.
Floor drain
Do not install the drain hose form on to the corrugated drain hose. You may need additional
i)arts. See Floor drain under 'qbols and Parts."
1. Insert new fiat washers (supplied) into each end of the inlet hoses. Firmly seat the washers
in the couplings.
A B
A. Coupling
B. Washer
8
Connect the inlet hoses to the water faucets
Make sure the washer basket is empty.
2. Attach the hose labeled hot to the hot water faucet. Screw on coupling by hand until it is
seated on the washer.
3. Attach the hose labeled cold to the cold water faucet. Screw on coupling by hand until it
is seated on the washer.
4. Using pliers, tighten the couplings with an additional two-thirds turn.
lighten the couplings with an additional two-thirds turn.
NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can
result.
Clear the water lines
Run water through both faucets and inlet hoses, into a laundry tub, drainpipe or bucket,
to get rid of particles in the water lines that might clog the inlet valve screens.
Check the temperature of the water to make sure that the hot water hose is connected to
the hot water faucet and that the cold water hose is connected to the cold water faucet.
Connect the inlet hoses to the washer
1,
2.
3.
A B
......,........................................./_ ......,,f'Y_Y ......
A. Hot water inlet valve
B.Cold water hllet valve
Attach the hot water hose to the inlet valve labeled hot.
Attaching one hose coupling first makes it easier to tighten the connection with pliers.
Screw on coupling by hand until it is seated on the washer.
4. Using pliers, tighten the coupling with an additional two-thirds turn.
NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can
result.
5. Attach the cold water hose to the inlet valve labeled cold.
6. Screw on coupling by hand until it is seated on the washer.
7. Using pliers, tighten the coupling with an additional two-thirds turn.
NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can
result.
.... 9
Check for leaks
[.urn oil the water faucets and check for leaks. A small amount of water might enter the
washer. You will drain this in a later step.
NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record
hose installation or replacement dates for future reference.
If you connect only one water hose, you must cap off the remaining water inlet port.
Periodically inspect and replace hoses if bulges, kinks, cuts, wear, or leaks are found.
l!;ie(T,,lli'Oll"Ie _'' '
1. Drape the power cord over the console.
2. Remove any cardboard used to move washer.
(2Z>
Bead_'d tie strap
3. Fasten the drain hose to the laundry tub leg or drain standpipe with the beaded tie strap.
See view A or B.
A B 0
If the washer faucets and the drain standpipe are recessed, put the formed end of the drain
hose into the standpipe. Tightly wrap the tie strap around the water inlet hoses and the
drain hose. See view C.
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
One washer foot has been installed at a different height on your new washer. The other three
feet were preset at the factory. Properly leveling your washer will minimize noise and
vibration.
1. Slide the washer to its final location.
2. Push on upper front panel to be sure the washer is on its rear feet.
3,
4,
[.ower right front foot until it contacts the floor. By hand, firmly rotate foot as much as an
additional 1V2turns. [-he other three feet have been preset at the factory.
Check the levelness of the washer by first placing a level on the lid near the console.
Next, place the level on the side of the washer in the crease between the top of the
washer and the cabinet.
level the front.
10
6. Checkforleaksaroundfaucetsandinlethoses.
Level the side.
5. If the washer is not level, move the washer out slightly, tip back, prop up the front of the
washer on a wood block. Adjust the feet up or down as necessary by twisting the feet.
Repeat steps 1 through 4 until washer is level.
6. Use a 9/16"or 14 mm open-end wrench to turn the Iocknut counterclockwise on the foot
tightly against the washer cabinet.
IMPORTANT: [f the Iocknut is not tight against the washer cabinet, the washer may
vibrate.
1. Check the electrical requirements. Be sure that you have the correct electrical supply and
the recommended grounding method. See "Electrical Requirements."
2. Check that all parts are now instal led. if there is an extra part, go back through the steps to
see which step was skipped.
3. Check that you have all of your tools.
4. Keep the foam packing ring from the washer tub for future relocation of the washer.
Dispose of/recycle all packaging materials.
5. Check that the water faucets are on.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
7. Plug into a grounded 3 prong outlet.
8. Remove any protective film or tape remaining on the washer.
9. Read "Washer Use."
10. [b test and to clean your washer, measure 1/2of the detergent manufacturer's
recommended amount of High Efficiency (HE) powdered or liquid detergent for a
medium-size load and pour it into the detergent dispenser. Close the lid. Press POWER.
Select a normal cycle and press Start. Allow it to complete one whole cycle.
BENEFITS AND FEATURES
Your washer has several benefits and features which are summarized here. Some items may
not apply to your model.
High-Efficiency Wash System
Your new top loading, high-efficiency washer saves you time by allowing you to do fewer,
larger loads. It also conserves resources and also lowers your water and energy bills by using
the following innovations.
IntelliFill 'M Water Level Control
This washer senses the load size and composition through a series of fills and wash motion. [t
then adjusts the water level for the best cleaning and rinsing performance. It eliminates the
guesswork. The water level is just right for every wash load size.
NOTE: You may notice during a cycle that the wash load is not completely submerged in
water. This is normal for your washer.
AutoTemp Control
The Auto [emp Control system on this washer electronically senses and maintains a uniform
water temperature by regulating incoming water temperatures. Using Auto Temp Control will
help dissolve detergent.
Washer Impeller System
Your new washer works differently than most washers that you are accustomed to. [-he most
striking difference is that the washer has an washer impeller system. It uses this new
innovative washer impeller at the bot'_om of the wash basket to move your load through a
mixture of water and detergent. [he load is moved from the outside toward the middle with
items coming up in the center and down on the outside edges.
Dispensers
The dispensers make your washer truly automatic. It is unnecessary for you to return to the
washer during the cycle to add detergent, bleach, or fabric softener.
laundry products are added to the load at the proper time in the wash cycle.
Spin Speeds
This washer is preset to automatically select the spin speed based on the cycle selected.
Depending on your wash load, you can change the preset speeds. The spin speed on this
washer is nearly twice as fast as that of a conventional washer. You may notice different
sounds during a spin cycle because of this higher speed.
Stain Cycle
The Stain Cycle option uses Direct Inject Cleaning Action to help ensure better soil and stain
removal. Stain Cycle reduces the need for pretreatment and is safe for all washable fabrics.
Water flushes through the dispenser to dissolve the detergent. The detergent mixture is then
sprayed onto the load while the washer spins at low speed.This cleaning action will last up to
5 minutes depending on the cycle selected.
The washer then stops spinning, fills with water to the appropriate level and continues
washing with the selected cycle.
High Efficiency (HE) Detergent
This washer is designed for High Efficiency (HE) detergent use only. HE detergents are made to
produce the right amount of suds and give the best performance in low water wash systems.
Innovative Features
Your new washer includes these features that help to reduce noise, increase the ease of use
and improve wash performance.
Electronic Controls
Electronic controls with preset cycles are easy to use whether you are a beginner or an
"expert."
Quiet Operation
This washer is insulated with sound-dampening materials to reduce washer operation sounds
and noises. On some models, an additional tub wrap is added for extra dampening of
vibration and sound. [he washer has an additional bottom sound pad that is included
separately for installation by the customer.
Suspension System
[b reduce washer "walk" and "out of balance" conditions, your new washer combines:
4 Spring damper struts to isolate vibration
Balance ring at the top and bottom of the wash basket to minimize vibration
Operating software designed to sense and correct off-balance loads
Clean Washer Cycle
This washer features an easy-to-use Clean Washer cycle that thoroughly cleans the inside of
your washing machine using higher water volumes in combination with liquid chlorine
bleach.
Stainless Steel Basket
The stainless steel basket is corrosion resistant and enables higher spin speeds for more water
extraction, reducing drying time.
Self-clean Wash and Rinse Filter System
[his washer filters 100% of the wash and rinse water. [he water is filtered then recirculated.
The force filter traps sand and dirt, flushing them down the drain, so they are not redeposited
onto the clean clothes.
Delay Wash
Delay Wash allows you to load your washer and pause the start of the cycle for up to
10 hours.
End of Cycle Signal
The End of Cycle Signal produces an audible sound when the wash cycle is finished. This
signal is helpful when you are removing items from the washer as soon as it stops.
Spray Rinse
This washer is designed to save water by rinsing tile load with a spray rinse instead of a deep
water rinse on some cycles. When using fabric softener, always select the Fabric Softener
button or select Extra Rinse.
12
POWER
@
NOTE: Your washer model may vary from the model shown.
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Doing so can result in death, explosion, or fire.
WARNING: [b reduce the risk of fire, electric shock, or injury to persons, read the
[MPORTANT SAFETY INSTRUCTIONS before operating this appliance.
The following is a guide to starting your washer. Periodic references to other sections of this
manual provide more detailed information.
_ _,_ _/ ............. _?
Use only High Efficiency detergents. The package for this type of detergent will be marked
"l IE" or 'I ligh Efficiency." fhis wash system, along with less water, will create too much
sudsing with a regular non-HE detergent. Using regular detergent will likely result in washer
errors, longer cycle times and reduced rinsing performance. [t may also result in component
failures and noticeable mold or mildew. HE detergents are made to produce the right amount
of suds for the best performance. Follow the manufacturer's instructions to determine the
amount of detergent to use.
1.
Place a load of sorted clothes into the washer. See "Laundry Tips."
load evenly to maintain washer balance. Mix large and small items, items should
move easily through the wash water.
load only to the top of the basket as shown. Overloading can cause poor cleaning.
items need to move easily through the wash water.
5.
Pour measured liquid fabric softener into the fabric softener dispenser, if desired.
2.
Pour measured powdered or liquid High Efficiency detergent into the detergent dispenser.
Always use the detergent dispenser, and do not put detergent directly onto clothes in the washer.
6.
9.
10.
3. Add color-safe bleach (powdered or liquid) to this dispenser, if needed. Be sure to match
powdered color-safe bleach with powdered detergent or match liquid color-safe bleach
with liquid detergent.
4. Pour measured liquid chlorine bleach into the liquid chlorine bleach dispenser, if needed.
Bleach is diluted and automatically dispensed at the proper time during the wash cycle.
Do not overfill. Do not dilute. Do not use more than 1 cup (250 mL) for a full load.
Use less with a smaller load size.
Follow the garment and the chlorine bleach manufacturer's directions for proper use.
[b avoid spilling, use a cup with a pouring spout. Do not let bleach splash, drip, or run
down into the washer basket.
At the end of the cycle, a small amount of water may be left in the dispenser. [-his is normal.
NOTE: Use only liquid chlorine bleach in this dispenser.
11.
12.
Do not overfill. The dispenser holds 3 oz (94 ml.), or a capful of fabric softener.
[he fabric softener is dispensed in the final rinse. If Extra Rinse is selected, the fabric
softener will be dispensed during the Extra Rinse.
Do not spill or drip any fabric softener onto the clothes.
At the end of the cycle, a small amount of water may lye left in the dispenser. [his is
normal.
NOTE: Use only liquid fabric softener in this dispenser.
Close the washer lid.
Press POWER. [.his turns on the washer display.
Select a Wash Cycle. See "Cycles."
Select the desired Modifiers. See "Modifiers."
Select an Option, if desired. See "Options."
Select Fabric Softener or Extra Rinse option if you are using liquid fabric softener.
Select Delay Wash, if desired. See "Delay Wash" in the "Modifiers" section.
Press START. The wash cycle begins, and the display shows the estimated remaining time.
The lid will lock.
NOTE: [f you do not press Start within 5 minutes of pressing Power, the washer
automatically shuts off.
Add a Garment
You can place additional clothing in the wash when the "Add a Garment" status light is
glowing without sacrificing wash performance.
To add a garment or pause the washer at any time
1. Press PAUSE/CANCEL once.
2. Wait until the Lid lock light turns off, then open the lid.
3. Add items,
To restart the washer
I. Close the lid and press START.
2. [b unlock the lid after the Add a Garment period, press PAUSE/CANCEl. once. Pressing
PAUSE/CANCEl. twice will cancel the wash cycle.
14
YoucanstoptilewashcycleanddrainthetubbypressingthePause/Cancelbuttontwiceor
thePowerbuttononce.
YoucanchangeCycles,ModifiersandOptionsanytimebeforeStartispressed.Notall
ModifiersandOptionsareavailableforallcycles.
Ashorttonesoundswhenachangeisselected.
Threeshorttonessoundifanunavailablecombinationisselected.[helastselectionwill
notbeaccepted.
Changing Cycles after pressing Start
1. Press PAUSE/CANCEl. twice to cancel the cycle. The washer will drain.
2. Press POWER.
3. Select the desired wash cycle.
4. Select the desired Modifiers and Options.
5. Press START.
The washer restarts at the beginning of the new cycle.
NOTE: If you do not press Start within 5 minutes of pausing the washer, the washer
automatically shuts off.
Changing Modifiers and Options after pressing Start
You can change a Modifier or Option anytime before the selected Modifier or Option begins
by choosing the desired Modifiers and/or Options.
NOTE: An error tone will sound if your selection is unavailable.
To manually drain the washer and spin the load
1. Press PAUSE/CANCEl. twice to cancel the wash cycle and drain the washer.
2. Press POWER.
3. Turn knob to select [)RAIN & SPIN.
4. Press START.
When the spin is complete, the lid unlocks. Items can be removed from the washer.
d2_ +'_
L,_S _S
These lights show which portion of the cycle the washer is operating. They also indicate when
you can add other garments to the wash load.
DELAY SOAK WASH RINSE SPIN CLEAN
_o o_
ADD A GARMENT
Indicator lights
An indicator light shows which Cycle, Modifiers and Options you have selected.
Estimated Time Remaining
When a wash cycle is started, the estimated time remaining for the cycle, including fills and
drains, will be displayed. The time will count down to the end of the cycle.
ESTIMATEDTIME
REMAINING
[urn the knob to choose the right wash cycle for the type of fabrics you are washing. When
the knob points to a cycle, the indicator light for the cycle will glow and the indicator light for
Start will blink. If the default settings for the Modifiers and Options are acceptable, you may
press Start to begin the wash cycle.
NORMAL WRINKLE
SHEETS CONTROL
COLORS/
JEANS
SUPER RAPID
WASH"
HAND
WASH
:LEAN
ONLY WASHER
WITH BLEACH
RINS ONLY
& SPIN SOAK
Preset Cycle Settings
For ease of use, [)reset cycle setti%s provide the recommended fabric care setti%s for each
cycle.
To use the preset cycle settings:
1. Press POWER.
2. Select the cycle you want by turning the knob. The preset cycle settings will be displayed
(see following chart).
NOTE: The preset times may vary slightly depending on your model.
3. Press START. ]he wash cycle will begin.
F_
!!{lll{l{!_!!iii!iiii_ii!!iiiiiiiiiiiiiiiiiiii_{{!!_!_i_!_!_!_!i{ii_i{{i_i{{i_i{{i_i{{i_i{{i_i{{i_i{{i_i{_ i@!_!_!_{i!ii;::!!i!!!:i!!!15
Preset Cycle Settings
Cycle Preset Minutes* Soil Level** Wash/Rinse Temp
Whites 79 Heavy Hot/Cold
Super Wash 66 Heavy Hot/Cold
Bulky 46 Normal Warm/Cold
Sheets 46 Normal Warm/Cold
Normal 43 Normal Warm/Cold
Wrinkle Control 44 Medium Warm/Cold
Colors/Jeans 42 Normal Cold/Cold
Quick Wash 34 light Warm/Warm
Delicate 36 light Cold/Cold
Handwash 35 light Cold/Cold
Clean Washer 41 Medium Warm/Cold
with bleach only
Soak 20 Not applicable Cold/Cold
Rinse & Spin 10 Not applicable Not applicable
Spin Only 60 Not applicable Not applicable
*These times are for reference only and may not match your model exactly.
**Cycle time in minutes will appear in the display while you are making selections. The total
cycle time will appear, including an estimated time for drain and fill times, once Start is
pressed.
NOTE: Load only to the top of the basket. Overloading can cause poor cleaning. See "Starting
Your Washer."
IMPORTANT: When washing waterproof/water-resistant items such as plastic lined mattress
pads, shower curtains, tarps, jackets, or sleeping bags, select the lowest spin speed setting
available for the cycle and washer model being used.
Whites
This cycle introduces liquid chlorine bleach to the load at the proper time for improved whitening
of your heavily soiled white fabrics. Cycle combines high-speed wash action and high-speed spin
speed. For maximum soil and stain removal, liquid chlorine bleach must be used.
Super Wash
Use this cycle for heavily soiled or sturdy items. Cycle combines high-speed wash action and
high-speed spin. Stain Cycle is the default option for this cycle, but it can be turned off. See
"Changing Cycles, Modifiers and Options."
Bulky
Use this cycle to wash large items such as comforters, sleeping bags and blankets. This cycle
starts with a soak to thoroughly saturate your large load. This is followed by medium wash
action and medium spin speeds to maintain load balance.
Sheets
Use this cycle for sheets, pillowcases and towels. The wash action of this cycle is designed to
keep large items from tangling and bailing up.
IMPORTANT: For best performance, drop items in loose heaps evenly around the basket wall.
[])o not load items directly on the impeller for this cycle.
Normal
Use this cycle for normally soiled cottons and mixed fabric loads. Cycle combines high-speed
wash action and high-speed spin.
When washing waterproof/water-resistant items such as plastic lined mattress pads, shower
curtains, tarps, jackets, or sleeping bags, select the lowest spin speed setting available for the
cycle and washer model being used.
Wrinkle Control
Use this cycle to wash loads of no-iron fabrics such as sport shirts, blouses, casual business
clothes, permanent press and blends. This cycle uses medium-speed wash action, a low-
speed spin and a cool down process to help reduce wrinkling.
Colors/Jeans
Use this cycle for lightly soiled, dark or highly dyed natural fabrics such as cotton that may be
susceptible to dye loss. Cycle uses low to medium-speed wash action and high-speed spin.
For best results use cold or warm water.
Quick Wash
Use this cycle to wash small, lightly soiled loads that are needed in a hurry. This short cycle
combines high-speed wash action and high-speed spin for the optimal cleaning and
shortened dry times.
Delicate
Use this cycle to wash lightly soiled garments indicating "Machine Washable Silks" or
"Gentle" cycle on the care labeh This cycle uses intermittent low speed wash action and low-
speed spin for optimal fabric care.
Garments are labeled "Hand Wash" because:
The fiber construction may be sensitive to wash action.
The fabric contains sensitive dyes that may bleed.
Handwash
[his cycle combines low-speed wash and low-speed spin action to clean items labeled as
"Machine Washable Wool" on the garment care labeh Pre Soak and Deep Clean options are
not available in this cycle.
Soak
This cycle is preset for a 41 -minute cycle and soak time can be adjusted according to your
needs by selecting Soil I.eveh After the selected soak period has ended, the washer will drain
but does not spin the load. At the end of Soak, the washer will drain and wait for a wash cycle
to be selected, to complete the cleaning process.
NOTE: Automatic bleach dispensing is not part of the soak cycle.
Rinse & Spin
Use this option to get a deep rinse followed by a high-speed spin. The time display will
include an estimate of how long it will take to fill and drain the washer.
When to use Rinse & Spin:
For loads that need rinsing only.
For completing a cycle after the power has been off.
16
To use or change Rinse & Spin setting:
1. Turn knob to RINSE & SPIN until the Rinse & Spin indicator light glows.
2. Press START.
Spin Only
Spin Only may hel I) shorten drying times for some heavy fabrics or special-care items. Spin
Only may also be used for draining the washer after canceling a cycle or completing a cycle
after a power failure.
To use or change Spin Only setting:
1. [urn knob to SPIN ONI.Y until the Spin Only indicator light glows.
2. Press START.
Clean Washer
Use the Clean Washer cycle once a month to keep the inside of your washer fresh and clean.
This cycle uses a higher water level in combination with liquid chlorine bleach to thoroughly
clean the inside of your washing machine. See "Cleaning Your Washer."
IMPORTANT: Do not add detergent to this cleaning cycle. Use only liquid chlorine bleach.
Do not place garments or other items in the washer during the Clean Washer cycle. Use this
cycle with an empty wash tub.
Modifiers allow you to further customize your cycles and save energy.
_EXTRA
i HEAVY
iOHEAVY
iQ MEDIUM
( (
SOIL SPIN
LEVEL SPEED
AUTO TEMP
CONTROL
HOT/COLD
HIGH WARM/_AtARM
MEDIUM WARM/COLD
lid LOW O COOL/COLD
NO SPIN
WASH!RINSE
TEMP
Soil Level
Soil level (wash time)is preset for each wash cycle. See "Preset Cycle Settings" in "Cycles." As
you press the Soil level pad, the cycle time (minutes) will increase or decrease in the
Estimated Time Remaining display and a different wash time will appear. 1o get the minimum
wash time, press the pad until the indicator light next to I.ight illuminates. This is the shortest
wash time available for that cycle.
For most loads, use the time recommended in the preset cycle settings.
For heavy soil and sturdy fabrics, press Soil [.evel to select more wash time, if needed.
For light soil and delicate fabrics, press Soil Level to select less wash time, if needed.
Spin Speed
This washer automatically selects the spin speed based on tile cycle selected. The [)reset
speeds can be changed. Spin speeds may vary by cycle.
Wash/Rinse Temp
Select a water temperature based on the type of load you are washing. Use the warmest wash
water safe for fabrics. Follow garment label instructions.
Warm rinses leave the loads drier and more comfortable to handle than cold rinses. However,
warm rinses also increase wrinkling. Cold rinses may help with wrinkling and save energy.
Temperature Guide
Wash Water Temperature Suggested Fabrics
Hot Whites and pastels
Warm Bright colors
Cold Colors that bleed or fade
NOTE: In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well.
Soils may be difficult to remove.
Auto Temp Control
Auto ]emp Control (AfC) electronically senses and maintains a uniform wash and rinse water
temperature. AfC regulates incoming hot and cold water. [he ATC is automatically turned On
when a cycle is selected. (See "Preset Cycle Settings" in "Cycles.")
A[C is available with Warm/Warm, Warm/Cold and Cool/Cold settings. The water
temperature in the Hot/Cold and CoM/Cold settings depend on the water temperature at the
water inlet faucets.
A[C ensures consistent cleaning.
Heated water consumes the largest amount of energy that a washer uses.
[oday's detergents work well at temperatures above 60°F (15.6°C).
Delay Wash
You can use the Delay Wash feature to delay the start of a wash cycle for up to 10 hours
(depending on your model).
1. I.oad the washer and fill the dispensers.
2. Close the washer lid.
3. Press POWER.
4. Select the desired Cycle, Modifiers and Options.
5. Press DE[.AY WASH. 1H (one hour) will be displayed in the time display window. The
indicator light for Delay Wash will glow.
@
6. For a longer delay time, press DELAY WASH. ]he Start time will increase by 1-hour steps.
!!{lll{l_i_!_!!iii!iiii_ii!!iiiiiiiiiiiiiiiiiiii_{{!!_!_i_!_!_!_!i{ii_i{{i_i{{i_i{{i_i{{i_i{{i_i{{i_i{{i_i{I il!!i!!!i!!!i!l!i;:!![!!!!!!!17
7.
Press START. The countdown in hours to the wash cycle will show in the time display
window and the indicator light will begin to flash.
NOTE: The Start indicator light will not flash when Delay Wash is chosen. You must press
Start to initiate a countdown for the cycle to begin.
To change the Delay Wash time:
Press PAUSE/CANCEL.
Press [)HAY WASH to select the desired delay time.
Press START to begin the countdown.
To cancel Delay Wash:
Press STAR| again to begin the cycle right away or press PAUSE/CANCEl twice.
Use these pads to select the desired options for your wash cycle.
®
STAIN
CYCLE
[..G.
E I'L°W
FABRIC END OF
SOFTENER CYCLE
DmSPENSER SIGNAL
Cycle Stain Cycle
(Adds time to the wash cycle)
Delicate Option
Handwash Option
Clean Washer Not available
with bleach only
Soak Not available
Rinse & Spin Not available
Spin Only Not available
Extra Rinse
An extra rinse can be used to aid in the removal of detergent or bleach residue from garments.
[his option provides an additional rinse with the same water temperature as the first rinse.
This is the default rinse setting for the Whites cycle.
Fabric Softener
Fabric Softener option must be selected if liquid fabric softener is added to the fabric softener
dispenser. [-his option flushes the dispenser at the correct time in a deep water rinse for
optimal distribution.
End of Cycle Signal Volume
[he End of Cycle Signal produces an audible sound when the wash cycle is finished. This
signal is helpful when you are removing items from the washer as soon as it stops. Select
High, low or Off.
Stain Cycle
This option provides enhanced cleaning action for tough stains. The Super Wash cycle
automatically includes Stain Cycle. Choosing Stain Cycle will add approximately 5 minutes
to a cycle. Stain Cycle should be started on a dry load only and cannot be selected after the
tub has started filling with water.
Stain Cycle may be selected as an option with other cycles. See table for details.
Cycle Stain Cycle
(Adds time to the wash cycle)
Whites Option
Super Wash Default
Bulky Not available
Sheets Not available
Normal Option
Wrinkle Control Option
Colors/Jeans Option
Quick Wash Option
POWER
@
Power
PressPOWER to turn the washer on or off.
START
PAUSE/
CANCEL
®
LID LOCK
18
Start
Press START to start your washer after a cycle has been selected. Be sure all desired Modifiers
and Options have been selected. The lid must be closed for the washer to start.
Pause/Cancel
Press PALJSE/C'ANCE[. once to pause or stop the washer at ally time. Press PAUSE/CANCEl.
once to unlock the lid and add a garment. Press START to complete the cycle from where it
was stopped. Press PAUSE/CANCEl twice to stop the wash cycle. The washer will then drain
and turn off.
Lid Lock
When the [.id lock status light glows, the washer lid is locked.
NOTE: You must wait until the I.id ].ock [.ight turns off before the lid can be opened.
Your new washer may make sounds your old one didn't. Because the sounds might be
unfamiliar, you may be concerned about them. These sounds are normal.
During washing
if you select the Stain Cycle option, you will hear a spin/spray noise at the start of the cycle.
During drain
If water is drained quickly from your washer (depending on your installation), you may hear
air being pulled through the pump during the end of draining.
During wash and spin
This washer does not have a transmission. The motor provides direct drive for agitation and
spin. You will hear sounds that are different from those of a conventional washer.
LAUNDRY TIPS
Preparing clothes for washing
Follow these recommendations to help you prolong the life of your garments.
Use only High Efficiency detergents. The package for this type of detergent will be marked
"HE" or "High Efficiency." This wash system, along with less water, will create too much
sudsing with a regular non-HE detergent. Using regular detergent will likely result in washer
errors, longer cycle times, and reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made to produce the right
amount of suds for the best pertormance. Follow the manufacturer's instructions to
determine the amount of detergent to use.
Use only "HE" High Effici_ulcy deterD'nL
Close zippers, snaps, and hooks to avoid snagging other items. Remove pins, buckles, and
other hard objects to avoid scratching the washer interior. Remove non-washable trim and
ornaments.
Empty pockets and turn them inside out.
[urn down cuffs; brush away lint and dirt.
[urn synthetic knits inside out to avoid pilling.
Tie strings and sashes so they will not tangle.
Mend tears, loose hems, and seams.
Treat spots and stains.
Stained or wet garments should be washed promptly for best results.
[urn wool knits inside out before washing.
Sorting
Separate heavily soiled items from lightly soiled ones, even if they would normally be
washed together. Separate lint-givers (towels, chenille) from lint-takers (corduroy,
synthetics, permanent press). When possible, turn lint-givers inside out.
Separate dark colors from light colors, colorfast items from noncolorfast items.
Sort by fabric and construction (sturdy cottons, knits, delicate items/.
Separate bulky, nonabsorbent items such as comforters, pillows and poly-filled jackets.
Use the Bulky cycle for these items.
Separate sheets, pillowcases and towels and use the Sheets cycle for these items. For best
performance, drop items in loose heaps evenly around the basket wall and do not load
items directly on the impeller for this cycle.
When washing waterproof/water-resistant items such as plastic lined mattress pads,
shower curtains, tarps, jackets, or sleeping bags, select the lowest spin speed setting
available for the cycle and washer model being used.
Unloading
Remove clothes from washer after the cycle is completed. Metal objects such as zippers,
snaps, and buckles may rust if left in the washer basket for a long time.
WASHER CARE
Washer Maintenance Procedure
This washer has a special cycle that uses higher water w_lumes in combination with liquid
chlorine bleach to thoroughly clean the inside of the washing machine.
NOTES:
Read these instructions completely before beginning the cleaning process.
It is recommended that you allow the cleanout cycle to complete without interruptions. If
necessary, the cleanout cycle may be interrupted by pressing the Power button once or
the Pause/Cancel button twice.
IMPORTANT: If the cleanout cycle is interrupted, run a Rinse & Spin cycle to ensure that
all remaining bleach is rinsed from the washer.
Begin procedure
1. Open the washer lid and remove all items from the washer.
2. Add liquid chlorine bleach to the bleach dispenser.
Add 1 cup (250 m[) liquid chlorine bleach to the bleach dispenser.
NOTE: Do not add any detergent to this cleaning cycle. Use of more than I cup
(250 mid of bleach will cause product damage over time.
3. Close the lid.
4. Press POWER.
5. [urn Cycle Control knob to CLEAN WASHER cycle.
[he Estimated Time Remaining display will show approximately 60 minutes.
6. Press START.
The cycle will begin and water will dispense in the washer for a moment and pause, then
the lid will lock and the cycle will continue.
Once the cleaning cycle has begun, allow the cycle to complete. An estimated cycle time
will appear on the display.
If the procedure does not sufficiently improve the machine freshness, evaluate your
installation and usage conditions for other causes.
Always do the following to maintain washer freshness
Use only High Efficiency (HE) detergent when washing a clothes load.
Cleaning the exterior
Use a soft damp cloth or sponge to wipe up any spills. Occasionally wipe the outside of your
washer to keep it looking new, Use mild soap and water. Do not use abrasive products.
!_14,i"@ _?,_' .._ ...........
Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect
and replace inlet hoses if bulges, kinks, cuts, wear or leaks are found.
When replacing your inlet hoses, mark the date of replacement on the label with a permanent
marker.
Install and store your washer where it will not freeze. Because some water may stay in the
hoses, freezing can damage your washer. If storing or moving your washer during freezing
weather, winterize it.
Non-use or vacation care:
Operate your washer only when you are at home. If you will be on vacation or not using your
washer for an extended period of time, you should:
Unplug washer or disconnect power.
Turn off the water supply to the washer. This helps avoid unintended flooding (due to a
water pressure surge) while you are away.
To winterize washer:
1. Shut off both water faucets.
2. Disconnect and drain water inlet hoses.
3. Put 1 qt (1 1) of R.V.-type antifreeze in the basket,
4. Run washer on the Rinse & Spin setting for about 30 seconds to mix the antifreeze and
remaining water.
5. Unplug washer or disconnect power.
To use washer again:
1. Flush water pipes and hoses. Reconnect water inlet hoses. [urn on both water faucets.
2,
3.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Plug in washer or reconnect power.
Run the washer through the Bulky cycle to clean the washer and remove the antifreeze, if
used. Use only HE High Efficiency detergent. Use _& the manufacturer's recommended
amount for a medium-size load.
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Maytag BRAVOS Mode d'emploi

Catégorie
Machines à laver
Taper
Mode d'emploi
Ce manuel convient également à

dans d''autres langues