Silvercrest SDBS 2200 A1 Operating Instructions Manual

Catégorie
Fers
Taper
Operating Instructions Manual

Ce manuel convient également à

IAN 96145
IRONING STATION SDBS 2200 A1
DAMPFBÜGELSTATION
Bedienungsanleitung
CENTRALE VAPEUR
Mode d'emploi
IRONING STATION
Operating instructions
YRYSILITYSASEMA
Käyttöohje
ÅNGSTRYKSYSTEM
Bruksanvisning
STOOMSTRIJKIJZER STATION
Gebruiksaanwijzing
GB / IE Operating instructions Page 1
FI Käyttöohje Sivu 21
SE Bruksanvisning Sidan 41
FR / BE Mode d'emploi Page 61
NL / BE Gebruiksaanwijzing Pagina 81
DE / AT / CH Bedienungsanleitung Seite 101
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Käännä ennen lukemista kuvallinen sivu esiin ja tutustu seuraavaksi laitteen kaikkiin toimintoihin.
Vik ut bildsidan och ha den till hands när du läser igenom anvisningarna och gör dig bekant med
apparatens / maskinens funktioner.
Avant de lire le mode d'emploi, ouvrez la page contenant les illustrations et familiarisez-vous ensuite avec
toutes les fonctions de l'appareil.
Vouw vóór het lezen de pagina met de afbeeldingen open en maak u vertrouwd met alle functies van het
apparaat.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.
A
B
1
SDBS2200A1
GB
IE
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Information concerning these operating instructions . . . . . . . . . . . . . . . . . . . . . . . .2
Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Warning notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Basic safety guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Operating components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Setting up and connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Safety guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Package contents and transport inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Disposal of packaging materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Set-up location requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Handling and operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Before initial use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Filling the water tank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Ironing without steam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Steam ironing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Vertical steam ironing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Refi lling the water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Safety guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Cleaning the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Safety guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Fault causes and rectifi cation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Storage/disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Disposal of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Notes on the Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Importer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2
SDBS2200A1
GB
IE
Introduction
Information concerning these operating instructions
Congratulations on the purchase of your new appliance.
You have selected a high-quality product. The operating instructions are part of
this product. They contain important information on safety, usage and disposal.
Before using the product, familiarise yourself with all handling and safety guide-
lines. Use the product only as described and for the range of applications specifi ed.
Please also pass these operating instructions on to any future owner(s).
Copyright
This documentation is protected by copyright.
Any copying or reproduction, including in the form of extracts, or any reproduc-
tion of images (even in a modifi ed state), is permitted only with the written
authorisation of the manufacturer.
Intended use
This appliance is intended for the dry or steam ironing of all types of garments,
curtains and fabrics (also hanging). It is not intended for any other use or use
beyond that specifi ed. This appliance is not intended for use in commercial or
industrial environments.
The manufacturer accepts no responsibility for damage caused by failure to
observe these instructions, improper use or repairs, unauthorised modifi cations
or the use of unapproved replacement parts. The operator bears sole liability.
Warning notes
The following warnings are used in these operating instructions:
DANGER
A warning at this hazard level indicates an imminently hazardous
situation.
If the hazardous situation is not avoided, it could result in death or serious
physical injury.
Follow the instructions in this warning to prevent a fatality or serious
personal injur
y.
3
SDBS2200A1
GB
IE
WARNING
A warning at this hazard level indicates a potentially hazardous
situation.
Failure to avoid this hazardous situation could result in physical injury.
Follow the instructions in this warning to prevent physical injury.
CAUTION
A warning at this hazard level indicates potential property
damage.
Failure to avoid this situation could result in property damage.
Follow the instructions in this warning to prevent property damage.
NOTE
A note provides additional information that will assist you in using the
appliance.
Safety
In this section, you will fi nd important safety instructions for using
the appliance.
The appliance complies with the statutory safety regulations.
Improper use may result in personal injury and property damage.
Basic safety guidelines
To ensure safe operation of the appliance, follow the safety
guidelines set out below:
The appliance may not be used if it has been dropped, exhibits
visible damage or is leaking.
To prevent accidents, have defective plugs and/or power cables
replaced immediately by an authorised specialist technician or
our Customer Service department.
4
SDBS2200A1
GB
IE
This appliance may be used by children aged 8 years or more
and by persons with reduced physical, sensory or mental capa-
bilities or lack of experience and/or knowledge if they are super-
vised, or have been instructed in the safe use of the appliance
and have understood the potential risks. The appliance must not be
used as a plaything by children. Cleaning and user maintenance
must not be carried out by children unless they are supervised.
Children must not use the appliance as a plaything.
All repairs must be carried out by authorised specialist companies
or by the Customer Service department. Failure to make proper
repairs can put the user at risk. It will also invalidate any warranty
claim.
Repairs to the appliance during the warranty period may only
be carried out by a customer service department authorised
by the manufacturer. Otherwise no warranty claims can be
considered for subsequent damage.
Defective components must always be replaced with original
replacement parts. Compliance with safety requirements can
only be guaranteed if original replacement parts are used.
Do not place any objects on the appliance, especially not on
the connecting hose between the base station and the iron.
Do not operate or place the appliance close to an open fl ame
(e.g. candles).
5
SDBS2200A1
GB
IE
RISK OF ELECTRIC SHOCK!
The appliance should only be connected to correctly installed and
earthed mains power sockets. Ensure that the rating for your local
power supply corresponds with the details on the rating plate of
the appliance.
Arrange for Customer Services to repair or replace connecting
cables and/or appliances that are not functioning properly or
have been damaged.
Discontinue use of the appliance if the anti-kink protection on the
power cable is damaged!
When it is switched on or cooling down, the steam iron and its
connecting cable must be kept out of the reach of children who
are younger than 8 years old.
Never immerse the appliance in water. Wipe it only with a slightly
damp cloth.
Do not expose the appliance to rain, and never use it in a humid
or wet environment.
Always remove the mains cable from the mains socket by pulling
the plug – do not pull the cable itself.
Never touch the power cable or the plug with wet hands.
Do not place the appliance itself, furniture items or similar objects
on the power cable and make sure it cannot become jammed or
trapped in any way.
Ensure that the connecting cable never becomes wet or moist
during operation.
Do not open the appliance housing or attempt to repair or modify
the appliance. If the housing is opened or improper modifi cations
are made, you run the risk of receiving a potentially fatal electric
shock and the warranty will be void.
6
SDBS2200A1
GB
IE
RISK OF ELECTRIC SHOCK!
Protect the appliance from drips or splashes of water. Do not
place any water-fi lled vessels (e.g. fl ower vases) on or near the
appliance.
After fi nishing ironing, and before any cleaning and prior to fi lling
the water tank, remove the plug from the wall socket.
RISK OF ELECTRIC SHOCK!
Always put the iron on the base station stand. Pull the plug out of
the mains socket if you take a break from ironing.
DANGER OF SCALDING OR BURNING!
Caution! Hot surface!
The soleplate remains very hot while the iron is turned
on and a few minutes after the power is turned off .
Never touch the soleplate.
When the steam iron is hot, hold it only by the handle.
Children should be supervised to ensure that they do not play
with the appliance.
Do not aim the steam jet at people or animals!
Never open the steam pressure container during use. There is
a risk of burns from hot steam.
Never iron or steam clothes or other fabrics while they are being
worn or held by others.
7
SDBS2200A1
GB
IE
WARNING! PROPERTY DAMAGE
A warning at this hazard level indicates potential
pr
operty damage.
Failure to avoid this situation could result in property damage.
The steam iron may never be left unattended while it is connected
to the mains power supply.
Do not use carbonated water in the appliance.
Never use the appliance without water as otherwise the pump
could burn out.
Ensure that neither power cable nor the connecting hose come
into contact with the hot soleplate.
Do not scratch the soleplate. Avoid contact between the soleplate
and metal parts such as buttons or zips.
Operate the steam iron and the base station only on a stable,
level and fl at surface.
8
SDBS2200A1
GB
IE
NOTES
The steam iron station is equipped with a safety valve which regu-
lates the build-up of excess pressure in the pressure vessel during
the heating-up phase, and vents excess steam through the steam
outlets on the underside of the ironing station This means that
there may be a slight escape of steam after switching on. This is
normal behaviour and lasts just a few seconds It does not indicate
a defect in the steam iron station.
If steam or hot water droplets escape from the Calc / Lock /
Safe screw cap during heating, switch off the appliance and let it
cool down. Turn the Calc / Lock / Safe screw cap clockwise and
tighten it. If steam or water droplets continue to leak out, switch
off the appliance and contact Customer Service.
Under no circumstances should you try to unscrew the Calc /
Lock / Safe screw cap while the steam unit is hot and under pres-
sure. The Calc / Lock / Safe screw cap can only be unscrewed
when the appliance has cooled down.
9
SDBS2200A1
GB
IE
Operating components
(For illustrations see the fold-out page)
Figure A:
Temperature display
Steam blast button
Steam stop button (and a short steam blast)
Iron handle
Connecting hose
“Steam ready” indicator
“Water tank empty” indicator
“Iron dry” indicator
Steam control
Cable retractor button
“Boiler” button
ON/OFF button
Power cable with plug
Calc / Lock / Safe screw cap
Iron
Base station
Temperature control
Catch for the iron
Figure B:
Catch release
Water tank
Rest for connecting hose
Soleplate
10
SDBS2200A1
GB
IE
Setting up and connecting
Safety guidelines
WARNING
During the fi rst use of the appliance there is a risk of
injury and/or damage to property!
To avoid risks, observe the following safety instructions:
Packaging material must not be used as a plaything.
Risk of suff ocation.
Please follow the instructions regarding the electrical connection
of the appliance to avoid damage to property.
Package contents and transport inspection
The appliance is supplied with the following components as standard:
Ironing Station
Operating instructions
NOTE
Check the package for completeness and for signs of visible damage.
If the consignment is incomplete or damaged due to defective packaging
or carriage, contact the Service hotline (see the section Service).
Unpacking
Remove all parts of the appliance and the operating instructions from the box.
Remove all packaging material.
11
SDBS2200A1
GB
IE
Disposal of packaging materials
The packaging protects the appliance from damage during carriage.
The packaging materials have been selected for their environmental friendliness
and ease of disposal, and are therefore recyclable.
Returning the packaging to the materials cycle conserves raw materials and
reduces the amount of waste that is generated. Dispose of packaging materials
that are no longer needed in accordance with applicable local regulations.
NOTE
If possible, keep the original packaging of the appliance during the war-
ranty period so that the appliance can be packed properly for returning in
the event of a warranty claim.
Set-up location requirements
The surface on which you set up the base station must be stable, level and
heat resistant.
Electrical connection
Plug the mains cable plug into a properly connected and earthed AC
power outlet which delivers the voltage given in the “Technical Data” section.
Handling and operation
This section provides you with important information on handling and using the
appliance.
Before initial use
Clean the soleplate with a slightly damp cloth.
To remove any production residues, iron several times over an old, clean cloth.
NOTE
The appliance is equipped with a safety valve which regulates the build-up of
excess pressure in the pressure vessel during the heating-up phase, and vents
excess steam through the steam outlets on the underside of the ironing station
This can lead to a slight escape of steam after switching on. This is normal
behaviour and lasts just a few seconds. It does not indicate a defect in the
steam iron station.
12
SDBS2200A1
GB
IE
Filling the water tank
NOTE
Use only tap water or distilled water.
If the tap water in your locality is rated as hard, it is a good idea to mix the
tap water with some distilled water. Otherwise, lime scale build-up could
impair the functionality of the appliance.
Mix the tap water with distilled water as described in the table below:
Water hardness
Ratio of distilled water to
mains water
very soft/soft 0
medium 1:1
hard 2:1
very hard 3:1
Water with additives (such as starch, perfume, conditioner or other chemicals)
may not be put into the water tank
. These could damage the appliance
as residues can form in the steam chamber. The residues could contaminate
clothing if they come out of the steam outlets.
Reach into the recess on the water tank
and press the release catch
upwards with your fi ngertips.
Pull the water tank
forwards and out.
Fill the tank only up to the maximum limit.
Push the water tank
back onto the base station until it clicks into place.
If necessary, press a little harder on the upper part of the water tank to
ensure that it has clicked into place and is securely connected to the base
station .
NOTE
Do not tip or swing the steam station when it has a full water tank
.
Otherwise the water may spill out of the fi lling hole.
Fill the water tank before fi rst use and as soon as the "Water tank
empty" indicator lights up.
13
SDBS2200A1
GB
IE
Ironing without steam
NOTE
Always set the temperature control
and the steam control to the lowest
level before you switch on the appliance. The symbols on the temperature
control
correspond to the following settings:
Synthetics lowest temperature (70 120°C)
Wool, silk medium temperature (100 160°C)
● ● ● Cotton, linen highest temperature (140 210°C)
Press the on/off button
to switch on the appliance. The indicator in the
button as well as the “Iron dry” indicator light up.
NOTE
If the "Iron dry" indicator
does not light up, the boiler button is pressed.
Press this button to switch off the boiler function.
Turn the temperature control
to set the desired ironing temperature.
The temperature indicator
lights up while the appliance is heating up.
As soon as the temperature indicator goes out, the set temperature has
been reached and you can start ironing.
If the iron
is fi xed to the base station using the catch , push the
catch release into the position. Now you can remove the iron
from the base station .
After ironing, place the iron
on the base station stand .
Set the temperature control to “MIN”.
Press the on/off button
to switch off the appliance. The indicator in the
On/off button
and the “Iron dry” indicator go out. To avoid tripping
hazards, place the connecting hose in the holder provided, pull the
mains plug out of the socket and press the cable retractor button .
To fi x the iron
back onto the base station push the catch release
into the position. Then you can carry the appliance in just one hand using
the iron handle if you have previously placed the connecting hose in
the holder provided (to avoid a tripping hazard).
14
SDBS2200A1
GB
IE
Steam ironing
Press the on/off button to switch on the appliance. The indicator in the
On/off button
and the “Iron dry” indicator light up.
Press the boiler button
to activate steam ironing mode. The indicator in
the boiler button
lights up, and the “Iron dry” indicator goes out.
NOTE
The boiler is located in the bottom of the appliance and is automatically supplied
with water from the water tank
by means of a pump. During heating up
and refi lling the boiler, the pump switches on for a few seconds. This causes a
humming noise and you will feel the appliance vibrate. This is normal and is
not a reason for complaints.
After a few minutes, the “Steam ready” indicator lights up.
Turn the temperature control
to set the desired ironing temperature.
NOTE
For steam ironing you must set at least the medium temperature ● ● on the
temperature control
.
The temperature indicator
lights up while the appliance is heating up.
As soon as the temperature indicator goes out, the set temperature has
been reached and you can start steam ironing.
Set the steam control
to the desired steam setting. Turn the control
clockwise to increase the amount of steam. Turn it in the opposite direction
to reduce the amount of steam.
If the iron
is fi xed to the base station using the catch , push the
catch release into the position. Now you can remove the iron
from the base station .
While ironing, you can press the steam blast button
to give a continuing
blast of steam from the soleplate onto the clothes. Press the Steam stop
button to stop the steam output.
NOTE
If you only want a short steam blast, press the Steam stop button
briefl y
and then release it. The steam only comes out of the soleplate as long as
you hold down the button and stops when you release it.
15
SDBS2200A1
GB
IE
NOTE
To switch to dry ironing while you are steam ironing, press the boiler button
to release it. The "Iron dry" indicator will light up and the indicator in the
boiler button
and then, a little later, the "Steam ready" indicator go out.
You can now iron without steam.
After ironing, place the iron
on the stand of the base station . Set the
temperature control to “MIN”.
Press the boiler button
to deactivate steam ironing mode. The indicator in
the boiler button
goes out.
Press the on/off button
to switch off the appliance. All indicators go out.
To avoid tripping hazards, place the connecting hose in the holder
provided, pull the main plug out of the socket and press the cable retractor
button .
To fi x the iron
back onto the base station push the catch release
into the position. Then you can carry the appliance in just one hand using
the iron handle if you have previously placed the connecting hose in
the holder provided (to avoid a tripping hazard).
Vertical steam ironing
Hang the item to be ironed on a coat hanger that you hold fi rmly in one
hand.
Hold the iron
in a vertical position with the other hand and press the
steam blast button .
Touch the fabric lightly with the soleplate
to remove creases.
Press the Steam stop button
to stop the steam output.
Refi lling the water
NOTE
As soon as the "Water tank empty" indicator
lights up, you must add more
water. See the section "Filling the water tank".
Put the iron on the stand of the base station .
Refi ll the water as described in the section “Filling the water tank”.
16
SDBS2200A1
GB
IE
Cleaning
Safety guidelines
WARNING! DANGER TO LIFE DUE TO ELECTRIC SHOCK!
Risk of injury when cleaning the appliance!
To avoid risks, observe the following safety instructions:
Before cleaning the appliance, disconnect the plug from the mains power
socket!
If necessary, allow the appliance to cool down before cleaning it.
Never immerse the appliance in water to clean it.
CAUTION
Damage to the appliance!
To avoid irreparable damage to the appliance, ensure that no moisture
gets into it during cleaning.
Do not use aggressive scouring cleaners or solvents, or a wire brush or
other abrasive objects, to clean the surfaces.
Cleaning the appliance
Clean the surfaces of the iron and the base station with a soft, damp
cloth only.
Remove the water tank
and empty it.
Unscrew the Calc / Lock / Safe screw cap
anticlockwise out of the
thread in the boiler.
NOTE
The Calc / Lock / Safe screw cap can only be unscrewed once the
appliance has cooled down.
Empty the remaining water out of the boiler into a sink.
Pour around 150 ml of vinegar (approx. 5–6% acidity) into the boiler.
Screw the Calc / Lock / Safe screw cap
anticlockwise into the thread in
the boiler.
Swirl the liquid in the base station
around a couple of times and then set
down the appliance on a level fl at surface.
After about 15 to 30 minutes, unscrew the Calc / Lock / Safe screw cap
again and tip the vinegar into a sink.
17
SDBS2200A1
GB
IE
Use a funnel to add some water to the boiler and rinse it through several
times.
After you have emptied the boiler again, screw the Calc / Lock / Safe screw
cap
back into the thread and tighten it hand-tight.
Troubleshooting
This section contains important information on fault identifi cation and rectifi cation.
Observe the instructions in order to avoid risks and damage.
Safety guidelines
WARNING
Observe the following safety information to avoid risks and property damage:
Repairs to electrical appliances should only be carried out by specialists
trained by the manufacturer. Improper repairs can cause considerable risks
to users and damage to the appliance.
Fault causes and rectifi cation
The following table will help to identify and rectify minor faults:
Fault Possible cause Remedy
The appliance is
not working.
Fault with the power supply.
Check whether the mains plug
is fi rmly in the socket.
The appliance is not switched on. Switch the appliance on using
the on/off switch
.
The appliance
produces no/too
little steam.
There is not enough water in the
water tank
.
Fill the water tank
with water.
The appliance is not suffi ciently
hot.
Wait until the "Steam ready"
indicator
lights up.
The steam control
is set to
minimum.
Turn the steam control
clockwise.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125

Silvercrest SDBS 2200 A1 Operating Instructions Manual

Catégorie
Fers
Taper
Operating Instructions Manual
Ce manuel convient également à