Maytag MES8800FZ Manuel utilisateur

Catégorie
Cuisinières
Taper
Manuel utilisateur

Ce manuel convient également à

W10844284B
RANGE SAFETY .............................................................................2
The Anti-Tip Bracket ....................................................................2
KEY USAGE TIPS ...........................................................................4
AquaLift
®
Self-Cleaning Technology ............................................4
Surface Temperatures ..................................................................4
Preheating ....................................................................................4
Ceramic Glass Cooktop Cleaning ...............................................4
FEATURE GUIDE ............................................................................5
Electronic Oven Controls .............................................................7
COOKTOP .......................................................................................9
Cookware ...................................................................................10
Home Canning ...........................................................................11
OVEN .............................................................................................12
Aluminum Foil .............................................................................12
Positioning Racks and Bakeware ..............................................12
Oven Vent ...................................................................................13
Sabbath Mode............................................................................13
Baking and Roasting ..................................................................13
Broiling........................................................................................14
Convection Cooking ..................................................................14
Cook Time ..................................................................................14
Warming Drawer .........................................................................14
Oven Light ..................................................................................15
RANGE CARE ...............................................................................16
Clean Cycle ................................................................................16
General Cleaning ........................................................................17
TROUBLESHOOTING ..................................................................18
ACCESSORIES .............................................................................20
WARRANTY ..................................................................................21
THANK YOU for purchasing this high-quality product. Register your range at www.maytag.com. In Canada, register
your range at www.maytag.ca.
For future reference, please make a note of your product model and serial numbers. These can be found on the label
located on the oven frame behind the top right side of the oven door.
Model Number _____________________________________ Serial Number _____________________________________
Para una versión de estas instrucciones en español, visite www.maytag.com.
Deberá tener a mano el número de modelo y de serie, que están ubicados en el marco del horno, detrás del lado
derecho superior de la puerta del horno.
Table of Contents
User Guide
Electric Range
2
RANGE SAFETY
The Anti-Tip Bracket
The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the
anti-tip bracket fastened down properly.
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Verify the anti-tip bracket has been properly installed and engaged per installation instructions.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed and engaged.
Failure to follow these instructions can result in death or serious burns to children and adults.
To verify the anti-tip bracket is installed and engaged:
Slide range forward.
Look for the anti-tip bracket securely attached to floor or wall.
Slide range back so rear range foot is under anti-tip bracket.
See installation instructions for details.
WARNING
Anti-Tip
Bracket
Range Foot
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
3
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the range, follow
basic precautions, including the following:
WARNING: TO REDUCE THE RISK OF TIPPING OF
THE RANGE, THE RANGE MUST BE SECURED BY
PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK
IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE
RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET
SECURELY ATTACHED TO FLOOR OR WALL, AND
SLIDE RANGE BACK SO REAR RANGE FOOT IS
UNDER ANTI-TIP BRACKET.
CAUTION:
Do not store items of interest to children in
cabinets above a range or on the backguard of a range –
children climbing on the range to reach items could be
seriously injured.
Proper Installation – Be sure the range is properly installed
and grounded by a qualified technician.
Never Use the Range for Warming or Heating the Room.
Do Not Leave Children Alone Children should not be left
alone or unattended in area where the range is in use.
They should never be allowed to sit or stand on any part of
the range.
Wear Proper Apparel Loose-fitting or hanging garments
should never be worn while using the range.
User Servicing – Do not repair or replace any part of the
range unless specifically recommended in the manual. All
other servicing should be referred to a qualified technician.
Storage in or on the Range – Flammable materials should
not be stored in an oven or near surface units.
Do Not Use Water on Grease Fires Smother fire or flame
or use dry chemical or foam-type extinguisher.
Use Only Dry Potholders Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
potholder touch hot heating elements. Do not use a towel
or other bulky cloth.
DO NOT TOUCH SURFACE UNITS OR AREAS NEAR
UNITS – Surface units may be hot even though they are
dark in color. Areas near surface units may become hot
enough to cause burns. During and after use, do not touch,
or let clothing or other flammable materials contact surface
units or areas near units until they have had sufficient time
to cool. Among those areas are the cooktop and surfaces
facing the cooktop.
Use Proper Pan Size The range is equipped with one or
more surface units of different size. Select utensils having
flat bottoms large enough to cover the surface unit heating
element. The use of undersized utensils will expose a
portion of the heating element to direct contact and may
result in ignition of clothing. Proper relationship of utensil to
burner will also improve efficiency.
Never Leave Surface Units Unattended at High Heat
Settings – Boilover causes smoking and greasy spillovers
that may ignite.
Make Sure Reflector Pans or Drip Bowls Are in Place
Absence of these pans or bowls during cooking may
subject wiring or components underneath to damage.
Protective Liners – Do not use aluminum foil to line surface
unit drip bowls or oven bottoms, except as suggested in
the manual. Improper installation of these liners may result
in a risk of electric shock, or fire.
Glazed Cooking Utensils Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed
utensils are suitable for range-top service without breaking
due to the sudden change in temperature.
Utensil Handles Should Be Turned Inward and Not Extend
Over Adjacent Surface Units To reduce the risk of burns,
ignition of flammable materials, and spillage due to
unintentional contact with the utensil, the handle of a
utensil should be positioned so that it is turned inward, and
does not extend over adjacent surface units.
Do Not Soak Removable Heating Elements – Heating
elements should never be immersed in water.
Do Not Cook on Broken Cooktop – If cooktop should
break, cleaning solutions and spillovers may penetrate the
broken cooktop and create a risk of electric shock. Contact
a qualified technician immediately.
Clean Cooktop With Caution If a wet sponge or cloth is
used to wipe spills on a hot cooking area, be careful to
avoid steam burn. Some cleaners can produce noxious
fumes if applied to a hot surface.
Use Care When Opening Door Let hot air or steam
escape before removing or replacing food.
Do Not Heat Unopened Food Containers – Build-up of
pressure may cause container to burst and result in injury.
Keep Oven Vent Ducts Unobstructed.
Placement of Oven Racks Always place oven racks in
desired location while oven is
cool. If rack must be moved
while oven is hot, do not let potholder contact hot heating
element in oven.
DO NOT TOUCH HEATING ELEMENTS OR INTERIOR
SURFACES OF OVEN – Heating elements may be hot even
though they are dark in color. Interior surfaces of an oven
become hot enough to cause burns. During and after use,
do not touch, or let clothing or other flammable materials
contact heating elements or interior surfaces of oven until
they have had sufficient time to cool. Other surfaces of the
appliance may become hot enough to cause burns – among
these surfaces are oven vent openings and surfaces near
these openings, oven doors, and windows of oven doors.
For self-cleaning ranges
Do Not Clean Door Gasket The door gasket is essential
for a good seal. Care should be taken not to rub, damage,
or move the gasket.
Do Not Use Oven Cleaners No commercial oven cleaner
or oven liner protective coating of any kind should be used
in or around any part of the oven.
Clean Only Parts Listed in Manual.
Before Self-Cleaning the Oven Remove broiler pan and
other utensils.
For units with ventilating hood
Clean Ventilating Hoods Frequently Grease should not
be allowed to accumulate on hood or filter.
When flambeing foods under the hood, turn the fan on.
4
AquaLift
®
Self-Cleaning Technology
AquaLift
®
Self-Cleaning Technology is a first-of-its-kind
cleaning solution designed to minimize the time, temperature
and odors that ordinarily come with traditional self-cleaning
methods. With AquaLift
®
Self-Cleaning Technology, an innovative
coating on the interior of the oven is activated with heat and
water to release baked-on soil. To use AquaLift
®
Self-Cleaning
Technology, simply wipe out loose debris, pour water into the
oven bottom and run the AquaLift
®
Self-Cleaning cycle. When
the cycle finishes in under 1 hour at a lower temperature than
in traditional self-cleaning methods, just wipe out the remaining
water and loose debris. See the “Clean Cycle” section for more
detailed instructions. For additional information, frequently
asked questions and videos on using AquaLift
®
Self-Cleaning
Technology, visit our website at
http://whirlpoolcorp.com/aqualift.
Surface Temperatures
When the range is in use, all range surfaces may become hot,
such as the knobs and oven door.
Warming Drawer
When the oven is in use, the drawer may become hot. Do not
store plastics, cloth or other items that could melt or burn in
the drawer.
Oven Vent
The oven vent releases hot air and moisture from the oven, and
should not be blocked or covered. Do not set plastics, paper,
or other items that could melt or burn near the oven vent.
Preheating
When beginning a Bake, Convect Bake, or Convect Roast cycle,
the oven will begin preheating after Start is pressed. The oven
will take approximately 12 to 15 minutes to reach 350°F (177°C)
with all of the oven racks provided with your oven inside the
oven cavity. Higher temperatures will take longer to preheat.
The preheat cycle rapidly increases the oven temperature. The
actual oven temperature will go above your set temperature to
offset the heat lost when your oven door is opened to insert food.
This ensures that when you place your food in the oven, the
oven will begin at the proper temperature. Insert your food when
the preheat tone sounds. Do not open the door during preheat
before the tone sounds.
Ceramic Glass Cooktop Cleaning
To avoid damaging the cooktop, do not use steel wool, abrasive
powder cleansers, chlorine bleach, rust remover, or ammonia.
1. Remove food/residue with the Cooktop Scraper.
For best results, use the cooktop scraper while the
cooktop is still warm but not hot to the touch. It is
recommended to wear an oven mitt while scraping
the warm cooktop.
Hold the cooktop scraper at approximately a 45° angle
against the glass surface, and scrape the residue. It will
be necessary to apply pressure in order to remove the
residue.
Allow the cooktop to cool down completely before
proceeding to Step 2.
2. Apply a few dime-sized drops of affresh
®
Cooktop Cleaner
to the affected areas.
Rub affresh
®
Cooktop Cleaner onto the cooktop surface
with the blue Cooktop Cleaning Pad. Some pressure is
needed to remove stubborn stains.
Allow the cleaner to dry to a white haze before
proceeding to Step 3.
3. Polish with a clean, dry cloth or a clean, dry paper towel.
Repeat steps 1 through 3 as necessary for stubborn
or burned-on stains.
The Complete Cooktop Cleaner Kit is available for order including
the following:
Cooktop Scraper
affresh
®
Cooktop Cleaner
Blue Cooktop Cleaning Pads
See the “Accessories” section for part numbers and information
on ordering.
KEY USAGE TIPS
5
FEATURE GUIDE
Keypad Feature Instructions
SETTINGS/
CLOCK
Clock
The Clock can use a 12- or 24-hour cycle. See the “Electronic Oven Controls” section.
1. Press SETTINGS/CLOCK until “CLOCK” is displayed.
2. Use the number keypads to set the time of day.
3. Press START to change the time.
4. Press “3” for AM or “6” for PM.
SETTINGS/
CLOCK
Settings
Enables you to personalize the audible tones and oven operation to suit your needs.
See the “Electronic Oven Controls” section.
LIGHT Oven cavity light
The oven light is controlled by a keypad on the oven control panel. While the oven door is
closed, press LIGHT to turn the light on and off. When the oven door is opened, the oven
light will automatically come on.
KITCHEN
TIMER (On/Off)
Oven timer
The Timer can be set in hours or minutes up to 9 hours and 59 minutes.
1. Press KITCHEN TIMER.
2. Press the number keypads to set the length of time in hr-min-min. Leading zeros do not
have to be entered. For example, for 2 minutes, enter “2.”
3. Press KITCHEN TIMER to begin the countdown. If enabled, one tone will sound at the
end of countdown.
4. Press KITCHEN TIMER again to cancel the Timer and return to the time of day. Do not
press the Cancel keypad because the oven will turn off.
5. If the Timer is running, but not in the display, press KITCHEN TIMER to display the
countdown for 5 seconds.
START Cooking start
The Start keypad begins any oven function. If Start is not pressed within 2 minutes after
pressing a keypad, the function is canceled and the time of day is displayed.
CANCEL Range function
The Cancel keypad stops any function, except the Clock and Timer.
BAKE Baking and
roasting
1. Press BAKE.
2. Press the number keypads to set the desired temperature.
3. Press START.
4. To change the temperature, repeat steps 2 and 3.
5. Press CANCEL when finished.
BROIL Broiling
1. Press BROIL.
2. Select the broiling temperature by pressing 1 - High or 2 - Low.
3. Press START and allow the oven to preheat for 5 minutes.
4. To change the temperature, repeat steps 2 and 3.
5. Position the cookware in the oven, and then close the door.
6. Press CANCEL when finished.
This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Product
Help section of our website at www.maytag.com for more detailed instructions. In Canada, refer to the Product Help Section
at www.maytag.ca.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
6
Keypad Feature Instructions
CONVECT Convection
cooking
1. Press CONVECT until the desired convection mode appears in the display.
2. Press START.
3. Press the number keypads to set the desired temperature.
4. Press START.
5. To change the temperature, repeat steps 3 and 4.
6. Press CANCEL when finished.
KEEP WARM Hold warm
Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM.
2. Set the desired temperature between 145°F and 190°F (63°C and 88°C)
using the number keypads. The default temperature is 170°F (75°C).
3. Press START.
4. To change the temperature, repeat steps 2 and 3.
5. Press CANCEL when finished.
WARM ZONE
ON/OFF/
CONFIRM
Warming zone
Press WARM ZONE ON/OFF to select the warming element on the cooktop, and then press
WARM ZONE CONFIRM.
Press WARM ZONE ON/OFF again to turn off the warming element.
DELAY START Delayed start
The Delay Start keypad is used to enter the starting time for an oven function with a delayed
start. Delay Start should not be used for foods such as breads and cakes because they may
not bake properly.
To set a Timed Cook or a Delayed Timed Cook, see “Cook Time” section.
COOK TIME Timed cooking
Timed cooking allows the oven to be set to turn on at a certain time of day, cook for a set
length of time, and/or shut off automatically.
To set a Timed Cook or a Delayed Timed Cook, see “Cook Time” section.
POWER
PREHEAT
Rapid oven
preheating
Provides the fastest preheat time for the Bake function. Rapid Preheat is preset to OFF,
but it can be changed to ON.
1. Press POWER PREHEAT.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START or CANCEL to exit and display the time of day.
IMPORTANT: This feature should only be used for one-rack baking. Unused racks should
be removed prior to Power Preheat. A standard rack should be used for Power Preheat.
If preheating for the Bake cycle has already started, Rapid Preheat may be started directly
by pressing POWER PREHEAT.
WARMING
DRAWER ON
(HI/MED/LO)/
OFF
Warming drawer
1. Press WARMING DRAWER ON to select the Warming Drawer function at the Low setting.
2. To select a higher temperature setting, press WARMING DRAWER ON a second time for
the Medium setting or a third time for the High setting.
3. Press START to begin preheating the warming drawer.
4. Allow the warming drawer to preheat for 15 minutes.
5. Place the cooked food(s) in the warming drawer.
6. Press WARMING DRAWER OFF to turn off the heating element.
See the “Warming Drawer” section for more information.
AQUALIFT
SELF CLEAN
Clean cycle
See the “Clean Cycle” section.
START (hold
3 sec. to lock)
Oven control
lockout
1. Check that the oven is OFF.
2. Press and hold START (hold 3 sec. to lock) for 3 seconds.
3. A tone will sound, and “Control Locked” will scroll, and then “Locked” will be displayed.
4. Repeat to unlock. No keypads will function with the controls locked. The cooktop
functions are not affected by the oven control lockout.
SETTINGS/
CLOCK
Energy save
1. Press SETTINGS/CLOCK until “ENERGY SAVER” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
If Energy Save is ON, the range will go into Sleep mode after 5 minutes of inactivity.
Any keypad press will activate the display. If Energy Save is OFF, the display will be
on at all times.
7
Electronic Oven Controls
Control Display
The display will flash when powered up or after a power loss.
Press CANCEL to clear. When the oven is not in use, the time of
day is displayed. If the range is in Energy Save mode, the display
will be blank when not in use.
Tones
Tones are audible signals, indicating the following:
One Tone
Valid keypad press
Oven is preheated (long tone)
Function has been entered
Reminder, repeating each minute after the end-of-cycle tones
Three Tones
Invalid keypad press
Four Tones
End-of-cycle
Use the Settings/Clock keypad to change the tone settings.
Energy Save
The Energy Save mode puts the range into Sleep mode and
reduces energy consumption.
To Activate the Energy Save Mode:
1. Press SETTINGS/CLOCK until “ENERGY SAVER”
is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
5. The setting will be activated after 5 minutes.
To Deactivate the Energy Save Mode:
1. Press SETTINGS/CLOCK until “ENERGY SAVER”
is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
5. The clock will reappear in the display, and the range
can be operated as usual.
Settings
Many features of the oven control can be adjusted to meet your
personal needs. These changes are made using the Settings/
Clock keypad.
Use the Settings/Clock keypad to scroll through the features
that can be changed. Each press of the Settings/Clock keypad
will advance the display to the next setting. After selecting
the feature to be changed, the control will prompt you for the
required input. Then press START or CANCEL to exit and display
the time of day. Details of all of the feature changes are explained
in the following sections.
Press CANCEL to exit Settings.
Clock
The Clock can use a 12- or 24-hour cycle.
1. Press SETTINGS/CLOCK until “CLOCK” is displayed.
2. Use the number keypads to set the time of day.
3. Press START to change the time.
4. Press “3” for AM or “6” for PM.
Fahrenheit and Celsius
The temperature is preset to Fahrenheit but can be changed
to Celsius.
1. Press SETTINGS/CLOCK until “TEMP UNIT” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START or CANCEL to exit and display the time of day.
Audible Tones Disable
Turns off all tones, including the end-of-cycle tone and keypress
tones. Reminder tones are still active when all tones are disabled.
1. Press SETTINGS/CLOCK until “SOUND” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START or CANCEL to exit and display the time of day.
Sound Volume
Sets the volume of the tone to either high or low.
1. Press SETTINGS/CLOCK until “SOUND VOLUME”
is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START or CANCEL to exit and display the time of day.
End-of-Cycle Tone
Activates or turns off the tones that sound at the end of a cycle.
1. Press SETTINGS/CLOCK until “END TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START or CANCEL to exit and display the time of day.
Keypress Tones
Activates or turns off the tones when a keypad is pressed.
1. Press SETTINGS/CLOCK until “KEYPRESS TONE”
is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START or CANCEL to exit and display the time of day.
8
12-Hour Shutoff
The oven control is set to automatically shut off the oven
12 hours after the oven initiates a cook or clean function.
This will not interfere with any timed or delay cook functions.
1. Press SETTINGS/CLOCK until “12Hr AUTO_OFF”
is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START or CANCEL to exit and display the time of day.
Languages - Scrolling Display Text
Language options are English, Spanish, and French.
1. Press SETTINGS/CLOCK until “LANGUAGE” is displayed.
2. The current setting will be displayed.
3. Press the “1” or “2” keypad to select the desired language.
4. Press START or CANCEL to exit and display the time of day.
Oven Temperature Offset Control
IMPORTANT: Do not use a thermometer to measure oven
temperature. Elements will cycle on and off as needed to provide
consistent temperature but may run slightly hot or cool at any
point in time due to this cycling. Most thermometers are slow
to react to temperature change and will not provide an accurate
reading due to this cycling.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature can
be adjusted to personalize it for your cooking needs. It can be
changed to Fahrenheit or Celsius.
To Adjust Oven Temperature:
1. Press SETTINGS/CLOCK until “TEMP CALIB” is displayed.
2. On some models, press “1” to adjust the drawer temperature
calibration. Press START, wait 10 seconds for the display to
change, and then continue with Step 3.
OR
Press START to adjust the oven temperature calibration. Wait
10 seconds for the display to change, and then continue with
Step 3.
3. Press the “3” keypad to increase the temperature in 5°F
(3°C) increments, or press the “6” keypad to decrease the
temperature in 5°F (3°C) increments. The offset range is from
-30°F to +30°F (-18°C to +18°C).
4. Press START or CANCEL to exit and display the time of day.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute
after the end-of-cycle tones.
1. Press SETTINGS/CLOCK until “REMINDER TONE”
is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START or CANCEL to exit and display the time of day.
12/24 Hour Clock
1. Press SETTINGS/CLOCK until “12/24 HOUR” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START or CANCEL to exit and display the time of day.
Demo Mode
IMPORTANT: This feature is intended for use on the sales floor
with 120 V power connection and permits the control features
to be demonstrated without the oven turning on. If this feature
is activated, the oven will not work.
1. Press SETTINGS/CLOCK until “DEMO MODE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START or CANCEL to exit and display the time of day.
Sabbath Mode
The Sabbath mode sets the oven to remain on in a bake setting
until turned off.
When the Sabbath mode is set, only the Bake cycle will operate.
All other cooking and cleaning cycles are disabled. No tones will
sound, and the displays will not indicate temperature changes.
When the oven door is opened or closed, the oven light will
not turn on or off and the heating elements will not turn on
or off immediately.
To Enable Sabbath Mode Capability (One Time Only):
1. Press SETTINGS/CLOCK until “SABBATH” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START or CANCEL to exit and display the time of day.
9
The control knobs can be set to anywhere between HIGH and
LOW. Push in and turn to setting.
Ceramic Glass
The surface cooking area may glow red when an element is ON.
Some parts of the surface cooking area may not glow red when
an element is ON. The glow will also randomly cycle off and back
on again, even while on High, to keep the cooktop from extreme
temperatures. This is normal operation.
It is normal for the surface of light-colored ceramic glass to
appear to change color when surface cooking areas are hot.
As the glass cools, it will return to its original color.
Clean the cooktop after each use to help avoid scratches, pitting,
abrasions, and to condition the glass surface. Ceramic glass
cooktop cleaner and a cooktop scraper are also recommended
for stubborn soils. Do not use abrasive cleaners, cleaning pads,
or harsh chemicals for cleaning. The Cooktop Care Kit contains
all of the items needed to clean and condition your ceramic
glass cooktop. Refer to the “Range Care” section for additional
information.
IMPORTANT: To avoid permanent damage to the cooktop
surface and to make soils easier to remove, clean the cooktop
after each use to remove all soils.
Avoid storing jars or cans above the cooktop. Dropping
a heavy or hard object onto the cooktop could crack
the cooktop.
To avoid damage to the cooktop, do not leave a hot lid on
the cooktop. As the cooktop cools, air can become trapped
between the lid and the cooktop and the ceramic glass
could break when the lid is removed.
For foods containing sugar in any form, clean up all spills
and soils as soon as possible. Allow the cooktop to cool
down slightly. Then, while wearing oven mitts, remove the
spills using a scraper while the surface is still warm. If sugary
spills are allowed to cool down, they can adhere to the
cooktop and can cause pitting and permanent marks.
To avoid scratches, do not slide cookware or bakeware
across the cooktop. Aluminum or copper bottoms and rough
finishes on cookware or bakeware could leave scratches or
marks on the cooktop.
Do not cook popcorn in prepackaged aluminum containers
on the cooktop. They could leave aluminum marks that
cannot be removed completely.
To avoid damage to the cooktop, do not allow objects that
could melt, such as plastic or aluminum foil, to touch any
part of the entire cooktop.
To avoid damage to the cooktop, do not use the cooktop
as a cutting board.
Use cookware about the same size as the surface cooking
area. Cookware should not extend more than
1
/
2
" (1.3 cm)
outside the area.
Use flat-bottomed cookware for best heat conduction and
energy efficiency. Cookware with rounded, warped, ribbed,
or dented bottoms could cause uneven heating and poor
cooking results.
Determine flatness by placing the straight edge of a ruler
across the bottom of the cookware. While you rotate the
ruler, no space or light should be visible between it and
the cookware.
Cookware designed with slightly indented bottoms or small
expansion channels can be used.
Make sure the bottoms of pots and pans are clean and dry
before using them. Residue and water can leave deposits
when heated.
To avoid damage to the cooktop, do not cook foods directly
on the cooktop.
Cooktop On Indicator Light
The Cooktop On indicator light is located on the console panel.
When any control knob on the console panel is turned on, the
Cooktop On indicator light will glow.
Hot Surface Indicator Light
On ceramic glass models, the Hot surface indicator light is
located on the console panel.
The Hot surface indicator light will glow as long as any surface
cooking area is too hot to touch, even after the surface cooking
area is turned off.
WARNING
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
REMEMBER: When range is in use, the entire cooktop area
may become hot.
A
B
C
A. Surface cooking area
B. Cookware/canner
C.
1
/
2
" (1.3 cm) maximum overhang
COOKTOP
10
Dual Zone Cooking Element
The Dual Zone cooking element offers flexibility depending on the
size of the cookware. Single size can be used in the same way as
a regular element. The dual size combines both the single and
outer element and is recommended for larger size cookware.
Rapid Boil Element (Right Front Element)
The Rapid Boil cooking element offers additional cooking
flexibility. The Rapid Boil cooking element can be used to boil
liquids faster. The lowest melt setting can be used to prepare
sauces, to brown or saute foods, and to keep foods at a low
temperature. Use cookware appropriate in size for the Rapid
Boil cooking element.
Melt Element (Left Rear Element)
The Melt cooking element offers flexibility due to a wide range
of settings between High and Melt. The High heat option can be
used to boil small amounts of liquid quickly. To reduce the power
setting, turn the knob clockwise. The Melt setting is designed
for delicate foods that require low heat, such as when melting
chocolate or holding sauces. Use cookware appropriate in size
for the Melt cooking element.
Warm Zone Element
Use the Cooktop Warm Zone element to keep cooked foods
warm. One hour is the recommended maximum time to maintain
food quality.
Do not use it to heat cold foods.
The Warm Zone element can be used alone or when any of the
other surface cooking areas are being used.
The Warm Zone element area will not glow red when cycling on.
However, the Cooktop On indicator light will be displayed when
the Warm Zone is in use.
Use only cookware recommended for oven and cooktop use.
Cover all foods with a lid or aluminum foil. When warming
baked goods, allow a small opening in the cover for moisture
to escape.
To avoid damage to the cooktop, do not use plastic wrap
to cover food because the plastic wrap may melt.
Use pot holders or oven mitts to remove food.
To Use:
1. To turn on, press WARM ZONE ON/OFF and then WARM
ZONE CONFIRM.
2. To turn off, press WARM ZONE ON/OFF.
Cookware
IMPORTANT: Do not leave empty cookware on a hot surface
cooking area, element, or surface burner.
Ideal cookware should have a flat bottom, straight sides, and a
well-fitting lid, and the material should be of medium-to-heavy
thickness.
Rough finishes may scratch the cooktop or coils. Aluminum
and copper may be used as a core or base in cookware.
However, when used as a base, they can leave permanent
marks on the surfaces.
Cookware material is a factor in how quickly and evenly heat
is transferred which affects cooking results. A nonstick finish
has the same characteristics as its base material. For example,
aluminum cookware with a nonstick finish will take on the
properties of aluminum.
Cookware with nonstick surfaces should not be used under
the broiler.
A
B
A. Single
B. Dual
A
B
A. Rapid boil option
B. Lower heat option
A
B
A. High heat option
B. Melt option
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
11
Check for flatness by placing the straight edge of a ruler across
the bottom of the cookware. While you rotate the ruler, no space
or light should be visible between it and the cookware.
Use the following chart as a guide for cookware material
characteristics.
Cookware Characteristics
Aluminum
Heats quickly and evenly.
Suitable for all types of cooking.
Medium or heavy thickness is best
for most cooking tasks.
May leave aluminum residues,
which may be diminished if cleaned
immediately after cooking.
Cast iron
Heats slowly and evenly.
Good for browning and frying.
Maintains heat for slow cooking.
Rough edges or burrs may scratch
the cooktop.
Ceramic or
Ceramic glass
Follow manufacturer’s instructions.
Heats slowly, but unevenly.
Ideal results on low-to-medium heat
settings.
May scratch the cooktop.
Copper
Heats very quickly and evenly.
May leave copper residues which may
be diminished if cleaned immediately
after cooking.
Can leave a permanent stain or bond
to the cooktop if overheated.
Earthenware
Follow manufacturer’s instructions.
Use on low heat settings.
May scratch the cooktop.
Porcelain
enamel-on-steel
or cast iron
See stainless steel or cast iron.
Porcelain enamel bakeware without the
metal base may bond to the cooktop if
overheated.
Stainless steel
Heats quickly, but unevenly.
A core or base of aluminum or copper
on stainless steel provides even
heating.
Use flat-bottomed cookware for best cooking results and energy
efficiency. The cookware should be about the same size as
the cooking area outlined on the cooktop or the coil element.
Cookware should not extend more than
1
/
2
" (1.3 cm) beyond
the surface cooking area or element.
Home Canning
Canning can be performed on a glass smoothtop cooking
surface or traditional coil element cooktop. When canning for
long periods, alternate the use of surface cooking areas or
elements between batches. This allows time for the most recently
used areas to cool.
Center the canner on the largest surface cooking area or
element. On electric cooktops, canners should not extend
more than
1
/
2
" (1.3 cm) beyond the surface cooking area or
element.
Do not place canner on 2 surface cooking areas or
elements at the same time.
On ceramic glass models, use only flat-bottomed canners
to avoid damage to the cooktop and elements.
For more information, contact your local agricultural
extension office or refer to published home canning guides.
Companies that manufacture home canning products can
also offer assistance.
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 9
2 0
1
2
3
4
5
6
7
12
Odors and smoke are normal when the oven is used the first
few times or when it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive
to the fumes given off by the oven. Exposure to the fumes may
result in death to certain birds. Always move birds to another
closed and well-ventilated room.
Aluminum Foil
IMPORTANT: To avoid permanent damage to the oven bottom
finish, do not line the oven bottom with any type of foil or liner.
For best cooking results, do not cover entire oven rack with foil
because air must be able to move freely.
Positioning Racks and Bakeware
IMPORTANT: To avoid permanent damage to the porcelain
finish, do not place food or bakeware directly on the oven door
or bottom.
Bakeware
To cook food evenly, hot air must be able to circulate. Allow 2"
(5 cm) of space around bakeware and oven walls. Make sure
that no bakeware piece is directly over another.
Racks
Position racks before turning on the oven.
Do not position racks with bakeware on them.
Make sure racks are level.
To position a rack, pull it out to the stop position, raise the front
edge, and then lift out. Use the following illustration and charts
as a guide.
The oven has 7 positions for a flat rack, as shown in the previous
illustration and the following table.
Flat Rack Position* Type of Food
7 Broiling/searing meats,
hamburgers, steaks
6 Broiled meats, poultry, fish
3 or 4 Most baked goods, casseroles,
frozen foods
2 Roasted meats
1 Large roasts or poultry
For hamburger patties to have a well-seared exterior and a rare
interior, use a flat rack in rack position 7. Side 1 should cook
for approximately 2
1
/
2
to 3
1
/
2
minutes. Side 2 should cook for
approximately 4 to 5 minutes. Expect a moderate degree of
smoke when broiling.
* If your model has a Max Capacity Oven Rack, the recessed ends
must be placed in the rack position above the desired position
of the food. See the following illustration.
IMPORTANT: These rack positions are for flat racks. If a Max
Capacity Oven Rack is used, the rack position must be adjusted
as shown in the previous figure.
Multiple Rack Cooking
2-rack (non-convection): Use rack positions 2 and 5 or 3 and 6.
2-rack (convection): Use rack positions 2 and 5 or 3 and 6.
3-rack (convection): Use rack positions 2 and 7 and a Max
Capacity Oven Rack in rack position 5.
Baking Cookies and Layer Cakes on 2 Racks
Baking Layer Cakes
For best results when baking cakes on 2 racks, use the Bake
function, a flat rack in rack position 5, and a flat rack in rack
position 2. If you do not have 2 flat racks, use a Max Capacity
Oven Rack in rack position 6. Place the cakes on the racks as
shown. Keep at least 3" (7.6 cm) of space between the front of
the racks and the front cakes.
Baking Cookies
For best results when baking cookies on 2 racks, use the
Convection Bake function, a flat rack in rack position 6,
and a flat rack in rack position 3.
If you do not have 2 flat racks, use a flat rack in rack position
2 and a Max Capacity Oven Rack in rack position 6.
If you do not have Convection Bake, use the standard
Bake function.
7
6
5
4
3
2
1
A
B
A. Ends of rack in position 3
B. Food in position 2
OVEN
13
Oven Vent
The oven vent releases hot air and moisture from the oven
and should not be blocked or covered. Blocking or covering the
oven vent will cause poor air circulation, affecting cooking and
cleaning results. Do not set plastics, paper, or other items that
could melt or burn near the oven vent.
Sabbath Mode
The Sabbath mode sets the oven to remain on in a bake setting
until turned off.
When the Sabbath mode is set, only the Bake cycle will operate.
All other cooking and cleaning cycles are disabled. No tones will
sound and the displays will not indicate temperature changes.
When the oven door is opened or closed, the oven light will
not turn on or off and the heating elements will not turn on
or off immediately.
To Enable Sabbath Mode Capability (One Time Only):
1. Press SETTINGS/CLOCK until “SABBATH” is displayed.
“OFF. Press (1) for On” will scroll in the display.
2. Press the “1” keypad. “ON. Press (1) for Off” will scroll in the
display. Sabbath mode can be activated for baking.
3. Press START or CANCEL to exit and display the time of day.
NOTE: To disable the Sabbath mode, repeat steps
1 through 3 to change the status from “SABBATH ON”
to “SABBATH OFF.”
To Activate Sabbath Mode:
1. Press BAKE.
2. Press the number keypads to set a temperature other
than 350°F (177°C).
3. Press START.
For timed cooking in Sabbath mode, press COOK TIME
and then the number keypads to set the desired cook time.
Press START.
4. Press SETTINGS/CLOCK. Then press “7.” “SAb” will
appear in the display.
To Adjust Temperature (When Sabbath Mode Is Running):
1. Press the number keypad as instructed by the scrolling text
to select the new temperature.
NOTE: The temperature adjustment will not appear on
the display, and no tones will sound. The scrolling text
will be shown on the display as it was before the keypad
was pressed.
2. Press START.
To Deactivate Sabbath Mode:
Press SETTINGS/CLOCK, and then press “7” to return to regular
baking, or press CANCEL to turn off the range.
NOTE: No tones will sound while deactivating Sabbath mode.
Baking and Roasting
Preheating
When beginning a Bake, Convect Bake or Convect Roast cycle,
the oven will begin preheating after Start is pressed. The oven
will take approximately 12 to 15 minutes to reach 350°F (177°C)
with all of the oven racks provided with your oven inside the
oven cavity. Higher temperatures will take longer to preheat. The
preheat cycle rapidly increases the oven temperature. The actual
oven temperature will go above your set temperature to offset
the heat lost when your oven door is opened to insert food. This
ensures that when you place your food in the oven, the oven
will begin at the proper temperature. Insert your food when the
preheat tone sounds. Do not open the door during preheat before
the tone sounds.
Power Preheat
Power Preheat can be used to shorten the preheating time. Only
one standard flat oven rack should be in the oven during Power
Preheat. Extra racks should be removed prior to starting Power
Preheat. Press POWER PREHEAT and follow the oven control
prompts, or, if preheating has already started, simply press
POWER PREHEAT. The preheating cycle should be completed
before placing food in the oven. When the Power Preheat cycle
is complete, the oven starts a normal Bake cycle.
IMPORTANT: Power Preheat should be used only for one-rack
baking.
Oven Temperature
While in use, the oven elements will cycle on and off as needed
to maintain a consistent temperature, but they may run slightly
hot or cool at any point in time due to this cycling. Opening the
oven door while in use will release the hot air and cool the oven
which could impact the cooking time and performance. It is
recommended to use the oven light to monitor cooking progress.
NOTE: On models with convection, the convection fan may run in
the non-convection Bake mode to improve oven performance.
Temperature Management System
The temperature management system electronically regulates the
oven heat levels during preheat and Bake to maintain a precise
temperature range for optimal cooking results. The bake and broil
elements or burners cycle on and off in intervals. On convection
range models, the fan will run while preheating and may be
cycled on and off for short intervals during bake to provide the
best results. This feature is automatically activated when the oven
is in use.
Before baking and roasting, position racks according to the
“Positioning Racks and Bakeware” section. When roasting, it is
not necessary to wait for the oven preheat cycle to end before
putting food in, unless it is recommended in the recipe.
A
A. Oven vent
14
Broiling
When broiling, preheat the oven for 2 minutes before putting
food in, unless recommended otherwise in the recipe. Position
food on grid in a broiler pan, and then place it in the center of
the oven rack.
IMPORTANT: Close the door to ensure proper broiling
temperature.
Changing the temperature when broiling allows more precise
control when cooking. The lower the broil setting is, the slower
the cooking. Thicker cuts and unevenly shaped pieces of meat,
fish, and poultry may cook better at lower broil settings. Use rack
6 or 7 for broiling. Refer to the “Positioning Racks and Bakeware”
section for more information.
On lower settings, the broil element will cycle on and off to
maintain the proper temperature.
For best results, use a broiler pan and grid. It is designed to
drain juices and help avoid spatter and smoke.
If you would like to purchase a broiler pan, one may be
ordered. See the “Accessories” section.
Convection Cooking
In a convection oven, the fan-circulated hot air continually
distributes heat more evenly than the natural movement of air
in a standard thermal oven. This movement of hot air helps
maintain a consistent temperature throughout the oven, cooking
foods more evenly, crisping surfaces while sealing in moisture,
and yielding crustier breads.
During convection baking or roasting, the bake, broil, and
convection elements cycle on and off in intervals while the fan
circulates the hot air. During convection broiling, the broil and
convection elements cycle on and off.
If the oven door is opened during convection cooking, the fan
will turn off immediately. It will come back on when the oven
door is closed.
With convection cooking, most foods can be cooked at a lower
temperature and/or a shorter cooking time than in a standard
thermal oven. Use the following chart as a guide.
Convection Mode Time/Temp. Guidelines
Convection Bake 25°F (15°C) lower temperature,
possible shortened cooking time
Convection Roast Cooking time shortened by up to 30%
Convection Broil Shortened cooking time
Convect Options
Convect Bake - multiple-rack baking or cookies, biscuits, breads,
casseroles, tarts, tortes, cakes
Convect Roast - whole chicken or turkey, vegetables, pork
roasts, beef roasts
Convect Broil - thicker cuts or unevenly shaped pieces of meat,
fish or poultry
Cook Time
To Set a Timed Cook:
1. Press BAKE or BROIL, or press CONVECT until the
desired convection mode appears on the display.
2. Press the number keypads to enter a temperature other
than the one displayed.
3. Press COOK TIME. The cook time oven indicator light
will light up.
4. Press the number keypads to enter the length of time
to cook.
5. Press START. The display will count down the time.
When the time ends, the oven will shut off automatically.
6. Press CANCEL to clear the display.
To Set a Delayed Timed Cook:
1. Press BAKE or BROIL, or press CONVECT until the
desired convection mode appears on the display.
2. Press the number keypads to enter a temperature other
than the one displayed.
3. Press COOK TIME. The cook time oven indicator light
will light up.
4. Press number keypads to enter the length of time to cook.
5. Press DELAY START.
6. Press number keypads to enter the number of hours and/or
minutes you want to delay the start time.
7. Press START.
When the start time is reached, the oven will automatically
turn on. The temperature and/or time settings can be
changed anytime after the oven turns on by repeating steps
2 through 4. When the set cook time ends, the oven will shut
off automatically.
8. Press CANCEL to clear the display.
Warming Drawer
The warming drawer is ideal for keeping hot cooked foods at
serving temperature. It may also be used for warming breads
and pastries.
Different types of food may be placed in the warming drawer at
the same time. For best results, do not hold foods longer than
1 hour. For smaller quantities, pizza, or heat-sensitive foods, such
as eggs, do not hold longer than 30 minutes.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
15
Oven Light
The oven light is a standard 40-watt appliance bulb. Before
replacing, make sure the oven and cooktop are cool and the
control knobs are in the Off position.
To Replace:
1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb by turning clockwise.
5. Replace bulb cover by turning clockwise.
6. Plug in range or reconnect power.
Food must be at serving temperature before being placed in the
warming drawer. Breads, pastries, and fruit pies may be heated
from room temperature.
Remove food from plastic bags and place in oven-safe container.
Cover foods with a lid or aluminum foil.
Do not cover with plastic wrap.
Empty serving dishes and ovenproof dishes can be heated while
the warming drawer is preheating. Check the dish manufacturer’s
recommendations before warming the cookware.
Before using the warming drawer, wash the bottom of the drawer
with soap and water. See the “General Cleaning” section.
To Use:
1. Press WARMING DRAWER ON to select the Warming Drawer
function at the Low setting.
2. To select a higher temperature setting, press WARMING
DRAWER ON a second time for the Medium setting or a third
time for the High setting.
3. Press START to begin preheating the warming drawer.
4. Allow the warming drawer to preheat for 15 minutes.
5. Place the cooked food(s) in the warming drawer.
6. Press WARMING DRAWER OFF to turn off the heating
element.
The Warming Drawer operates at temperatures of approximately
140°F (60°C) (Low), 160°F (71°C) (Medium), 180°F (82°C) (High).
16
Clean Cycle
AquaLift
®
Technology is an innovative cleaning solution that
utilizes heat and water to release baked-on spills from the oven
in less than 1 hour. This new cleaning technology is a low-heat,
odor-free alternative to traditional self-cleaning options.
Allow the oven to cool to room temperature before using the
Clean cycle. If your oven cavity is above 200°F (93°C), “Oven
Cooling” will appear in the display and the Clean cycle will
not be activated until the oven cavity cools down.
To Clean:
1. Remove all racks and accessories from the oven cavity,
and wipe excess soil. Use a plastic scraper to remove easily
removed soils.
2. Pour 2 cups (16 oz [500 mL]) of distilled or filtered water onto
the bottom of the empty oven, and close the oven door.
IMPORTANT: Do not use chemicals or other additives with
the water. Do not open the oven door during the Clean cycle.
The water on the oven bottom is hot.
3. Press AQUALIFT SELF CLEAN and then START on the oven
control panel.
4. Allow 40 minutes for cleaning and cool down. A beep will
sound when the Clean cycle is complete.
5. Press CANCEL at the end of the cycle. Cancel may be
pressed at any time to stop the Clean cycle.
6. Remove the residual water and loosened soils with a sponge
or cloth immediately after the Clean cycle is complete. Much
of the initial 2 cups (16 oz [500 mL]) of water will remain in the
oven after the cycle is completed. If additional soils remain,
leave a small amount of water in the oven bottom to assist
with the cleaning.
7. If any soils remain, remove them with a non-scratch
scrubbing sponge or plastic scraper. Additional Clean
cycles may be run to help remove the stubborn soils.
IMPORTANT: Do not use oven cleaners. The use of chemicals,
including commercial oven cleaners or metal scouring pads,
may cause permanent damage to the porcelain surface of the
oven interior.
NOTES:
The range should be level to ensure that the entire surface
of the bottom of the oven cavity is covered by water at the
beginning of the Clean cycle.
For best results, use distilled or filtered water. Tap water
may leave mineral deposits on the oven bottom.
Before removing the residual water and loosened soils at the
end of the Clean cycle, insert a cloth or paper towel between
the lower edge of the oven door and the front frame to keep
water from spilling onto the front of the range and the floor.
Soil baked on through several cooking cycles will be more
difficult to remove with the Clean cycle.
Nonabrasive scrub sponges or eraser-style cleaning pads
(without cleaners) can be effective for cleaning the oven
cavity walls, oven door and oven bottom for difficult soils.
For best results, moisten the pads and sponges before use.
Run an additional Clean cycle for stubborn soils.
affresh
®
Kitchen Appliance Cleaner and affresh
®
Cooktop
Cleaner may be used to clean the oven bottom, walls, and
door when the oven has finished the cycle and returned to
room temperature. If affresh
®
Cooktop Cleaner is used, it
is recommended to wipe out the cavity with distilled water
as well. Refer to the “Accessories” section for information
on ordering.
Additional AquaLift
®
Technology Cleaning Kits may be
obtained by ordering Part Number W10423113RP. See
the “Accessories” section for more information.
For assistance with AquaLift
®
Technology, call 1-877-258-0808
in the U.S.A. or 1-800-807-6777 in Canada, or visit our website
at http://whirlpoolcorp.com/aqualift.
RANGE CARE
17
General Cleaning
IMPORTANT: Before cleaning, make sure all controls are
OFF and the oven and cooktop are cool. Always follow label
instructions on cleaning products. For additional information, you
can visit our website at www.maytag.com. In Canada, visit our
website at www.maytag.ca.
Soap, water and a soft cloth or sponge are suggested first,
unless otherwise noted.
EXTERIOR PORCELAIN ENAMEL SURFACES (on some models)
Food spills containing acids, such as vinegar and tomato, should
be cleaned as soon as the entire range is cool. These spills may
affect the finish.
Cleaning Method:
Glass cleaner, mild liquid cleaner, or nonabrasive
scrubbing pad:
Gently clean around the model/serial/rating plate
because scrubbing may remove numbers.
affresh
®
Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See the “Accessories” section for more information.
STAINLESS STEEL (on some models)
NOTE: To avoid damage to stainless steel surfaces, do not use
soap-filled scouring pads, abrasive cleaners, Cooktop Cleaner,
steel-wool pads, gritty washcloths, or abrasive paper towels.
Damage may occur to stainless steel surfaces, even with one-
time or limited use.
Cleaning Method:
Rub in direction of grain to avoid damaging.
affresh
®
Stainless Steel Cleaner Part Number W10355016
(not included):
See the “Accessories” section for more information.
METALLIC PAINT (on some models)
Do not use abrasive cleaners, cleaners with bleach, rust
removers, ammonia, or sodium hydroxide (lye) because the
paint surface may stain.
CERAMIC GLASS COOKTOP CLEANING
To avoid damaging the cooktop, do not use steel wool, abrasive
powder cleansers, chlorine bleach, rust remover or ammonia.
1. Remove food/residue with the Cooktop Scraper.
For best results, use the cooktop scraper while the
cooktop is still warm but not hot to the touch. It is
recommended to wear an oven mitt while scraping
the warm cooktop.
Hold the cooktop scraper at approximately a 45° angle
against the glass surface, and scrape the residue. It will
be necessary to apply pressure in order to remove the
residue.
Allow the cooktop to cool down completely before
proceeding to Step 2.
2. Apply a few dime-sized drops of affresh
®
Cooktop Cleaner
to the affected areas.
Rub affresh
®
Cooktop Cleaner onto the cooktop surface
with the blue Cooktop Cleaning Pad. Some pressure is
needed to remove stubborn stains.
Allow the cleaner to dry to a white haze before
proceeding to Step 3.
3. Polish with a clean, dry cloth or a clean, dry paper towel.
Repeat steps 1 through 3 as necessary for stubborn
or burned-on stains.
The Complete Cooktop Cleaner Kit is available for order
including the following:
Cooktop Scraper
affresh
®
Cooktop Cleaner
Blue Cooktop Cleaning Pads
See the “Accessories” section for part numbers and information
on ordering.
COOKTOP CONTROLS
To avoid damage to the cooktop controls, do not use steel wool,
abrasive cleansers, or oven cleaner.
To avoid damage, do not soak knobs.
When replacing knobs, make sure knobs are in the OFF position.
On some models, do not remove seals under knobs.
Cleaning Method:
Soap and water:
Pull knobs straight away from control panel to remove.
CONTROL PANEL AND OVEN DOOR EXTERIOR
To avoid damage to the control panel, do not use abrasive
cleaners, steel-wool pads, gritty washcloths, or abrasive
paper towels.
Cleaning Method:
Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly
on panel.
affresh
®
Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See the “Accessories” section for more information.
OVEN RACKS
Cleaning Method:
Steel-wool pad
For racks that have discolored and are harder to slide,
a light coating of vegetable oil applied to the rack guides
will help them slide.
18
First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid
a service call, refer to the warranty page in this manual and scan the code there with your mobile device, or visit
http://www.maytag.com/product_help. In Canada, visit http://www.maytag.ca.
Contact us by mail with any questions or concerns at the address below:
In the U.S.A.:
Maytag Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
In Canada:
Maytag Brand Home Appliances
Customer eXperience Centre
200 - 6750 Century Ave.
Mississauga, Ontario L5N 0B7
Please include a daytime phone number in your correspondence.
TROUBLESHOOTING
Problem Possible Causes and/or Solutions
Nothing will operate
Power supply cord is unplugged - Plug into a grounded outlet.
ENERGY SAVE is active, and the display is blank - Press any keypad on the control to display the time
of day. See the “Electronic Oven Controls” section for more information.
Household fuse is blown, or a circuit breaker is tripped - Replace the fuse or reset the circuit breaker.
If the problem continues, call an electrician.
The control displays an F9 or F9 E0 error code - The electrical outlet in the home may be mis-wired.
Contact a qualified electrician to verify the electrical supply.
Cooktop will not
operate
The control knob is not set correctly - Push in knob before turning to a setting.
On ceramic glass models, the oven control lockout is set - See the Control Lock keypad feature in the
“Feature Guide” section.
Excessive heat
around cookware
on cooktop
Cookware is not the proper size - Use cookware about the same size as the surface cooking area,
element or surface burner. Cookware should not extend more than
1
/
2
" (1.3 cm) outside the cooking area.
Cooktop cooking
results not
what expected
Control knob set to incorrect heat level - See the “Cooktop” section.
Range is not level - Level the range. See the Installation Instructions.
Cooktop element
cycles on and off
on High setting
Element cycling due to a temperature limiter - This is normal operation. The element may cycle on and off
to keep the cooktop from overheating.
Oven will not operate
Delay Start is set - See the “Cook Time” section.
Control is locked - Press and hold START for 3 seconds to unlock.
The range is in Demo mode - Demo mode will deactivate all oven elements. See “Demo Mode” in the
“Electronic Oven Controls” section.
Electronic oven control set incorrectly - See the “Electronic Oven Controls” section.
Oven temperature
too high or too low
Oven temperature needs adjustment - See “Oven Temperature Control” in the “Electronic
Oven Controls” section.
Oven indicator
lights flash
Power to range is turned on or restored - See “Control Display” in the “Electronic Oven Controls” section.
If the indicator lights keep flashing, call for service. See the “Warranty” section for contact information.
Display shows
messages
Power failure (display shows flashing time) - Clear the display. On some models, reset the clock,
if needed. See “Clock” keypad feature in the “Feature Guide” section.
Error code (display shows letter followed by number) - Depending on your model, press CANCEL
to clear the display. See “Control Display” in the “Electronic Oven Controls” section. If it reappears, call
for service. See the “Warranty” for contact information.
Clean cycle did not
work on all spills
Several cooking cycles between Clean cycles or spills on oven walls and doors - Run additional
Clean cycles. Use the AquaLift
®
Technology Cleaning Kit. affresh
®
Kitchen and Appliance Cleaner, or
affresh
®
Cooktop Cleaner can be used for stubborn soils. See the “Accessories” and “Clean Cycle”
sections for more information.
WARMING DRAWER
Check that the warming drawer is cool and empty before
cleaning.
Cleaning Method:
Mild detergent
OVEN CAVITY
Use AquaLift
®
Technology regularly to clean oven spills.
Do not use oven cleaners.
Food spills should be cleaned when oven cools. At high
temperatures, foods react with porcelain and staining,
etching, pitting or faint white spots can result.
Cleaning Method:
Clean cycle:
See “Clean Cycle” section.
19
Problem Possible Causes and/or Solutions
Mineral deposits
are left on the oven
bottom after the
Clean cycle
Tap water was used in the Clean cycle - Use distilled or filtered water in the Clean cycle.
To remove deposits, use a cloth soaked with vinegar. Then use a cloth dampened with water to
thoroughly remove any vinegar residue.
Range is not level - Mineral deposits will collect on dry areas of the oven bottom during the Clean
cycle. Level the range. See the Installation Instructions.
To remove deposits, use a cloth soaked with vinegar. Then use a cloth dampened with water to
thoroughly remove any vinegar residue.
Oven cooking results
not what expected
Range is not level - Level the range. See the Installation Instructions.
The set temperature was incorrect - Double-check the recipe in a reliable cookbook.
Oven temperature needs adjustment - See “Oven Temperature Control” in the “Electronic Oven
Controls” section.
Oven was not preheated - See the “Baking and Roasting” section.
Racks were positioned improperly - See the “Positioning Racks and Bakeware” section.
Not enough air circulation around bakeware - See the “Positioning Racks and Bakeware” section.
Darker browning of food caused by dull or dark bakeware - Lower oven temperature 25°F (15°C)
or move rack to a higher position in the oven.
Lighter browning of food caused by shiny or light colored bakeware - Move rack to a lower position
in the oven.
Batter distributed unevenly in pan - Check that batter is level in the pan.
Incorrect length of cooking time was used - Adjust cooking time.
Oven door was not closed - Be sure that the bakeware does not keep the door from closing.
Oven door was opened during cooking - Oven peeking releases oven heat and can result in
longer cooking times.
Rack is too close to bake burner, making baked items too brown on bottom - Move rack to
higher position in the oven.
Pie crusts browning too quickly - Use aluminum foil to cover the edge of the crust and/or reduce
baking temperature.
20
For accessories in the U.S.A., you can visit our website at www.maytag.com or call us at 1-800-688-9900.
In Canada, visit our website at www.maytag.ca or call us at 1-800-807-6777.
Complete Cooktop Cleaner Kit
(ceramic glass models)
(includes cleaner, protectant, protectant
applicator, scraper and cleaner pads)
Order Part Number 31605
Cooktop Protectant
(ceramic glass models)
Order Part Number 31463A
affresh
®
Stainless Steel Cleaning Wipes
(stainless steel models)
Order Part Number W10355049
affresh
®
Cooktop Cleaner
(ceramic glass models)
Order Part Number W10355051
Cooktop Cleaning Pads
(ceramic glass models)
Order Part Number W10391473
affresh
®
Stainless Steel Cleaner
(stainless steel models)
Order Part Number W10355016
affresh
®
Kitchen and Appliance Cleaner
Order Part Number W10355010
AquaLift
®
Oven Cleaning Kit
Order Part Number W10423113RP
Cooktop Scraper
(ceramic glass models)
Order Part Number WA906B
Granite Cleaner and Polish
Order Part Number W10275756
Gas Grate and Drip Pan Cleaner
Order Part Number 31617A
Canning Unit Kit
(coil models)
Order Part Number 242905
Gourmet Griddle
Order Part Number W10432539
Standard Flat Oven Rack
Order Part Number W10551060
Split Oven Rack
Order Part Number 4396927
Max Capacity Oven Rack
Order Part Number W10289145
Porcelain Broiler Pan and Grid
Order Part Number 4396923
Premium Broiler Pan and Roasting Rack
Order Part Number W10123240
Trim Assembly
5
/
8
" (1.7 cm) White - Order Part Number
W10675027
5
/
8
" (1.7 cm) Black - Order Part Number
W10675026
5
/
8
" (1.7 cm) Stainless Steel - Order Part
Number W10675028
1
1
/
8
" (2.9 cm) White - Order Part Number
W10731885
1
1
/
8
" (2.9 cm) Black - Order Part Number
W10731886
1
1
/
8
" (2.9 cm) Stainless Steel - Order Part
Number W10731887
Backsplash Assembly
White - Order Part Number W10655448
Black - Order Part Number W10655449
Stainless Steel - Order Part Number
W10655450
Grill Kit
Order Part Number W10432545
ACCESSORIES
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Maytag MES8800FZ Manuel utilisateur

Catégorie
Cuisinières
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues