Honeywell VISIONPRO TH8000 Le manuel du propriétaire

Operating

Manual

VisionPRO

®

TH8000 Series

Touchscreen Programmable Thermostat

Read and save these instructions

Need Help?

For assistance with this product please visit http://yourhome.honeywell.com

or call Honeywell Customer Care toll-free at 1-800-468-1502

BE CAREFUL! Never use sharp instruments, such as a pencil

or pen, to press touchscreen keys. To prevent damage to the

thermostat, always press keys with your fingertip.

This manual covers the following models

TH8110U: For 1 Heat/1 Cool systems

TH8320U: For up to 3 Heat/2 Cool systems

TH8321U: For up to 3 Heat/2 Cool systems with dehumidification

(Pull thermostat from wallplate and turn over to find model number)

® U.S. Registered Trademark.

US Patent No. 6595430, D509151 and other patents pending.

VisionPRO

®

TH8000 Series

1

About your new thermostat

Thermostat features ..........................2

Programming at a glance..................3

Quick reference to controls ..............4

Quick reference to status display ....5

Programming & Operation

Clock setting ......................................6

Fan setting ........................................7

System setting....................................8

Using program schedules ................9

Program schedule overrides ..........12

Vacation hold ..................................14

Special features ..............................15

Screen lock ......................................16

Screen cleaning ..............................17

Humidity display & control ..............18

Appendices

Battery installation ..........................20

Advanced functions ........................21

In case of difficulty ..........................26

Optional remote sensors ................28

Limited warranty ..............................29

Table of contents

This thermostat is ready to go!

Your new thermostat is pre-

programmed and ready to go.

See page 3

to check settings.

CAUTION: EQUIPMENT DAMAGE

HAZARD. To prevent possible

compressor damage, do not operate

cooling system when outdoor

temperature is below 50°F (10°C).

Operating Manual

2

About your new thermostat

Congratulations! You’ve just purchased the world’s most advanced, easy-

to-use thermostat. It has been designed to give you many years of reliable

service and touchscreen climate control.

Features

• 7-day program schedules maximize comfort and economy.

• Armchair programming: Just pull thermostat from the wall to set schedules.

• EnergyStar

®

compliant to greatly reduce your heating/cooling expenses.

• One-touch temp control overrides program schedule at any time.

• Precise comfort control keeps temperature within 1°F of the level you set.

• Change/check reminders let you know when to service or replace filters,

batteries and other critical components.

• Large touchscreen display with backlight is easy to read — even in the dark.

• Select models display and control summer humidity.

• Select models accommodate optional outdoor or indoor remote sensors.

VisionPRO

®

TH8000 Series

3

This thermostat is ready to go!

Your new thermostat is pre-programmed and ready to go. All you have to

do is set the time and day. Then check the settings below and change if

needed:

1 Set clock......................................................................................See page 6

2 Select fan setting: Preset to Auto ........................To change, see page 7

3 Select system setting: Preset to Heat ..................To change, see page 8

4 Program schedules: Preset to energy-saving levels

while you’re at work or asleep (assumes you

wake at 6 am, leave at 8 am, return at 6 pm

and go to bed at 10 pm) ..................................To change, see pages 10-13

ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time,

and manually adjust the temperature (see pages 12-14).

MON TUE WED THU FRI SAT SUN

HEAT

SYSTEM

SCHED HOLD CLOCK SCREEN MORE

AUTO

FAN

OK TO PICK MULTIPLE DAYS

Inside

70

Set To

Following

Schedule

70

AM

6:01

Operating Manual

4

Quick reference to controls

Press day(s) to set program schedule (see page 11)

Press to select fan

operation (see page 7)

Press to adjust

temperature settings

(see pages 11-14)

Press to set program

schedule (see page 11)

Press to override

program schedule

(see pages 12-14)

Press to set clock

(see page 6)

Press to lock keypad for 30

seconds to clean screen

(see page 17).

Press to select system

type (see page 8)

Press for more options

(select models only)

WED

HEAT

SYSTEM

SCHED HOLD CLOCK SCREEN MORE

AUTO

FAN

Inside

70

Set To

Following

Schedule

Recovery

70

AM

6:01

VisionPRO

®

TH8000 Series

5

Quick reference to status display

Current inside temperature Current day of week Temperature setting

System setting

Fan setting

Adaptive Intelligent

Recovery in effect (see

page 15)

Program schedule on

(does not display

when off)

Current time

Other display messages:

• Cool On: Cooling system is activated

• Heat On: Heating system is activated

• Aux Heat On: Auxiliary heating system is activated

Operating Manual

6

Clock setting

To set the current time display,

press clock, then press or

to adjust the time. Press and

hold or to advance the time

more quickly.

Press

DDOONNEE

to save & exit (or press

CCAANNCCEELL

to exit without changing

the time).

Note: The real-time clock should never

require adjustment since it automatically

updates for daylight savings time, and

stores all date/time information.

Note: To change the current week day

display, see page 22.

Press

CCLLOOCCKK

Adjust time, then press

DDOONNEE

SCHED HOLD CLOCK SCREEN MORE

AM

6:01

DONE CANCEL

AM

6:02

VisionPRO

®

TH8000 Series

7

Fan setting

Press

FFAANN

to select fan operation:

• On: Fan is always on.

• Auto: Fan runs only when the heating

or cooling system is on.

• Circ: Fan runs randomly, about 35%

of the time. Use this setting for

improved air circulation, or for more

efficient air cleaning, if you do not

want the fan to run all the time.

You can press

FFAANN

at any time to override

the fan settings you’ve programmed for

different time periods (see page 11). If

you select On or Circ, the setting you

select will remain active until you press

FFAANN

again to select Auto.

WED

HEAT

SYSTEM

SCHED HOLD CLOCK SCREEN MORE

AUTO

FAN

Inside

70

Set To

Following

Schedule

70

AM

6:01

Press

FFAANN

Operating Manual

8

System setting

Press the

SSYYSSTTEEMM

button to select:

• Heat: Thermostat controls only the

heating system.

• Cool: Thermostat controls only the

cooling system.

• Off: Heating and cooling systems are

off.

• Auto: Thermostat automatically

selects heating or cooling depending

on the indoor temperature. **

• Em Heat (only for heat pumps with

auxiliary heat): Thermostat controls

Emergency and Auxiliary Heat.

Compressor is locked out. **

WED

HEAT

SYSTEM

SCHED HOLD CLOCK SCREEN MORE

AUTO

FAN

Inside

70

Set To

Following

Schedule

70

AM

6:01

** Select models only

VisionPRO

®

TH8000 Series

9

WAKE

6:00 am

70

°

LEAVE

8:00 am

62

°

RETURN

6:00 pm

70

°

SLEEP

10:00 pm

62

°

Set to the time you awaken and the temperature you

want during the morning, until you leave for the day.

Set to the time you leave home and the temperature you

want while you are away (usually an energy-saving

level).

Set to the time you return home and the temperature

you want during the evening, until bedtime.

Set to the time you go to bed and the temperature you

want overnight (usually an energy-saving level).

Save money by setting program schedules

It’s easy to program your system for maximum energy savings. You can

program four time periods each day, with different settings for weekdays

and weekends.

Operating Manual

10

EnergyStar

®

settings for maximum cost savings

This thermostat is pre-set to use EnergyStar

®

program settings. We recom-

mend these settings, since they can reduce your heating/cooling expenses by

as much as 33%. (See next page to adjust times and temperatures of each

time period.)

70

°

78

°

70

°

78

°

62

°

85

°

62

°

85

°

70

°

78

°

70

°

78

°

62

°

82

°

62

°

82

°

Heat (Mon-Fri) Cool (Mon-Fri) Heat (Sat-Sun) Cool (Sat-Sun)

Wake

(6:00 am)

Leave

(8:00 am)

Return

(6:00 pm)

Sleep

(10:00 pm)

[Or cancel period]

VisionPRO

®

TH8000 Series

11

To adjust program schedules

1 Press

SSCCHHEEDD

, then

EEDDIITT

.

2 Press day buttons (

MMOONN

--

SSUUNN

) to select

day(s).

3 Press or to set Wake time for

selected day(s).

4 Press or to set Heat and Cool

temperature for this time period.

5 Press other time periods (

LLEEAAVVEE

,

RREETTUURRNN

,

SSLLEEEEPP

) to set time and temperatures

for each.

6 Press

DDOONNEE

to save & exit (or press

CCAANNCCEELL

to exit without saving changes).

Note: You can press

CCAANNCCEELL PPEERRIIOODD

to eliminate any

unwanted time period.

Note: Press

FFAANN

to customize fan settings for any

time period (see page 7).

Press

SSCCHHEEDD

SCHED HOLD CLOCK SCREEN MORE

Press

EEDDIITT

Select day(s)

Set time for program

period start

Set heat/cool levels

EDITDONE WAKE LEAVE RETURN SLEEP CANCEL

MON TUE WED THU FRI SAT SUN

HEAT

COOL

AUTO

FAN

OK TO PICK MULTIPLE DAYS

70

78

AM

6:00

DONE WAKE LEAVE RETURN SLEEP CANCEL

CANCEL

PERIOD

WED

HEAT

SYSTEM

SCHED HOLD CLOCK SCREEN MORE

CANCEL

AUTO

FAN

Inside

70

Set To

Hold Temperature

Until

73

AM

8:00

Operating Manual

12

Program schedule override (temporary)

Press or to immediately adjust the

temperature. This will temporarily over-

ride the temperature setting for the cur-

rent time period.

The new temperature will be maintained

until the time you set. When the timer

expires, the program schedule will

resume and set the temperature to the

level you’ve programmed for the current

time period.

To cancel the temporary setting at any

time, press

CCAANNCCEELL

(or

SSCCHHEEDD

). The program

schedule will resume.

Press

CCAANNCCEELL

(or

SSCCHHEEDD

) to

resume program schedule

Press to set timer

Adjust temperature

Heat On

VisionPRO

®

TH8000 Series

13

Program schedule override (permanent)

Press

HHOOLLDD

to permanently adjust the

temperature. This will turn off the

program schedule.

Whatever temperature you set will be

maintained 24 hours a day, until you

manually change it, or press

CCAANNCCEELL

(or

SSCCHHEEDD

) to cancel “Hold” and resume the

program schedule.

WED

HEAT

SYSTEM

SCHED HOLD CLOCK SCREEN MORE

CANCEL

AUTO

FAN

Inside

70

Set To

Permanent

Hold

73

AM

8:00

Press

CCAANNCCEELL

(or

SSCCHHEEDD

) to

resume program schedule

Press

HHOOLLDD

Adjust temperature

Heat On

Operating Manual

14

Vacation hold

This feature can suspend the program

schedule for extended periods of time.

Press or to set the temperature you

want, then press or to set the time

of day you want the schedule to resume

when you return. Press

HHOOLLDD

twice, then

press or to select the number of

days.

Whatever temperature you set will be

maintained 24 hours a day for the num-

ber of days you select. After this number

of days have elapsed, the previously pro-

grammed schedule will resume at the

time you set.

If you return earlier than expected, press

CCAANNCCEELL

(or

SSCCHHEEDD

) to cancel “Hold” and

resume the program schedule.

HEAT

SYSTEM

SCHED HOLD CLOCK SCREEN MORE

CANCEL

AUTO

FAN

Inside

70

Set To

Hold Temperature

Until

55

6:00

pm

1 Set temperature

2 Press to set time for

schedule to resume

HEAT

SYSTEM

SCHED HOLD CLOCK SCREEN MORE

CANCEL

Hold Temperature

Until

14

3 Press

HHOOLLDD

twice

4 Press to select number of days

DAYS

VisionPRO

®

TH8000 Series

15

Special features

Auto Changeover: When set to Auto, the thermostat automatically selects

heating or cooling depending on the indoor temperature.

Adaptive Intelligent Recovery: This feature allows the thermostat to

“learn” how long the furnace and air conditioner take to reach programmed

temperature settings, so the temperature is reached at the time you set.

For example: Set the Wake time to 6 am, and the temperature to 70°. The

heat will come on before

6 am, so the temperature is 70° by the time you

wake at 6. The message “Recovery” is displayed when the system is

activated before a scheduled time period.

Compressor Protection: This feature forces the compressor to wait a few

minutes before restarting, to prevent equipment damage. During the wait

time, the message “Wait” is displayed on screen.

Operating Manual

16

Screen lock

To prevent tampering, the screen can be

partially or fully locked.

When partially locked, the screen

displays

SSCCRREEEENN LLOOCCKKEEDD

for several seconds

if a locked key is pressed. To unlock the

screen, press any unlocked key while

SSCCRREEEENN LLOOCCKKEEDD

appears on the screen.

When the screen is fully locked, no keys

function. To lock or unlock the screen, see

advanced function 0670 on page 25).

WED

HEAT

SYSTEM

SCHED HOLD CLOCK SCREEN MORE

AUTO

FAN

Inside

70

Set To

SCREEN LOCKED

Following

Schedule

70

PM

6:00

See advanced function

0670 (page 25) for

screen lock options

VisionPRO

®

TH8000 Series

17

Screen cleaning

Press

SSCCRREEEENN

to lock the screen for clean-

ing. The screen will remain locked for 30

seconds so you can clean the screen

without changing any settings.

After 30 seconds, press

DDOONNEE

to resume

normal operation, or press

SSCCRREEEENN

again if

you require more time for cleaning.

Note: Do not spray any liquid directly on the

thermostat. Spray liquids onto a cloth, then use the

damp cloth to clean the screen. Use water or

household glass cleaner. Avoid abrasive cleansers.

30

OKAY TO

CLEAN

SCREEN

SCHED HOLD CLOCK SCREEN MORE

PM

6:00

Press

SSCCRREEEENN

Screen lock timer (30 seconds)

Operating Manual

18

Humidity level display (select models)

Select models can display the current

indoor humidity level.

(If an optional outdoor sensor is installed,

the outdoor temperature is shown

instead of the humidity level. Press

MMOORREE

to display the humidity level.)

WED

HEAT

SYSTEM

SCHED HOLD CLOCK SCREEN MORE

AUTO

FAN

Inside

70

Set To

Following

Schedule

70

PM

6:00

Indoor humidity level

Humidity

43

%

La page charge ...

Honeywell VISIONPRO TH8000 Le manuel du propriétaire

Honeywell VISIONPRO TH8000 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents