Jenn-Air JDB3600AWS3 Le manuel du propriétaire

Marque: Jenn-Air

Modèle: JDB3600AWS3

Catégorie: Lave-vaisselle

Taper: Le manuel du propriétaire

THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING,

please visit our website at www.jennair.com for additional information. If you still need assistance, call us at 1-800-688-1100. In

Canada, visit our website at www.jennair.ca or call us at 1-800-807-6777.

You will need your model and serial number located near the door on the right-hand or left-hand side of the dishwasher interior.

Para obtener acceso a "lnstrucciones para elusuario de lalavavajillas" en espa_ol, o para obtener informaci6n adicional de su

producto, visite: www.jennair.com

Tenga listo su nQmerode modelo completo. Puede encontrar su nQmerode modelo y de serie en la etiqueta ubicada cerca de la

puerta al lado derecho o izquierdo del interior de la lavavajillas.

TableofContents

DISHWASHER SAFETY ............................................................. 1

QUICK STEPS ............................................................................ 2

DISHWASHER USE .................................................................... 3

CYCLE AND OPTION DESCRIPTIONS .................................... 5

DISHWASHER FEATURES ........................................................ 7

FILTRATION SYSTEM ............................................................... 8

DISHWASHER CARE ................................................................. 9

TROUBLESHOOTING ................................................................ 9

WARRANTY .............................................................................. 11

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

W10300216A

iMPORTANT SAFETY iNSTRUCTiONS

WARNING: When using the dishwasher, follow basic precautions, including the following:

[] Read all instructions before using the dishwasher. [] Do not tamper with controls.

[] Use the dishwasher only for its intended function.

[] Use only detergents or rinse agents recommended for use in

a dishwasher, and keep them out of the reach of children.

[] When loading items to be washed:

1) Locate sharp items so that they are not likely to damage

the door seal; and

2) Load sharp knives with the handles up to reduce the risk

of cut-type injuries.

[] Do not wash plastic items unless they are marked

"dishwasher safe" or the equivalent. For plastic items not so

marked, check the manufacturer's recommendations.

[] Do not touch the heating element during or immediately after

use.

[] Do not operate the dishwasher unless all enclosure panels

are properly in place.

[] Do not abuse, sit on, or stand on the door, lid, or dish racks

of the dishwasher.

[] To reduce the risk of injury, do not allow children to play in

or on the dishwasher.

[] Under certain conditions, hydrogen gas may be produced in

a hot water system that has not been used for two weeks or

more. HYDROGEN GAS IS EXPLOSIVE. If the hot water

system has not been used for such a period, before using

the dishwasher turn on all hot water faucets and let the

water flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is flammable,

do not smoke or use an open flame during this time.

[] Remove the door or lid to the washing compartment

when removing an old dishwasher from service or

discarding it.

SAVE THESE iNSTRUCTiONS

GROUNDING iNSTRUCTiONS

For a grounded, cord-connected dishwasher:

The dishwasher must be grounded. In the event of a

malfunction or breakdown, grounding will reduce the risk of

electric shock by providing a path of least resistance for

electric current. The dishwasher is equipped with a cord

having an equipment-grounding conductor and a grounding

plug. The plug must be plugged into an appropriate outlet

that is installed and grounded in accordance with all local

codes and ordinances.

WARNING: Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

[]

Check with a qualified electrician or service representative

if you are in doubt whether the dishwasher is properly

grounded. Do not modify the plug provided with the

dishwasher; if it will not fit the outlet, have a proper outlet

installed by a qualified electrician.

For a permanently connected dishwasher:

The dishwasher must be connected to a grounded metal,

permanent wiring system, or an equipment-grounding

conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead on

the dishwasher.

SAVE THESE iNSTRUCTiONS

Tip Over Hazard

Do not use dishwasher until completely installed.

Do not push down on open door.

Doing so can result in serious injury or cuts.

Prepare and load _

dishwasher. %Y

Select a cycle and option.

(Cycles and options vary by model.)

EVERYDAY CYCLES

ENTERTAINMENT CYCLES --

OPTIONS

Add detergent ,' _ _

for cleaning and

rinse aid for

drying.

....:i:%

Start dishwasher.

NOTE: If the Start/Resume button is

located on the top of the door, push

the door firmly closed within

3 seconds of pressing START/

RESUME.

Start /

Resume

Prepare and Load the Dishwasher

IMPORTANT: Remove leftover food, bones, toothpicks and other

hard items from the dishes. Remove labels from containers before

washing.

10 Place load pattern

Upper rack Lower rack

12 Place load pattern

• Make sure that when the dishwasher door is closed no items

are blocking the detergent dispenser.

• Items should be loaded with soiled surfaces facing down and

inward to the spray as shown. This will improve cleaning and

drying results.

• Avoid overlapping items like bowls or plates that may trap food.

• Place plastics, small plates and glasses in the upper rack.

Wash only plastic items marked "dishwasher safe."

• To avoid thumping/clattering noises during operation: Load

dishes so they do not touch one another. Make sure lightweight

load items are secured in the racks.

When loading silverware, always place sharp

items pointing down. Mix some of the items

having pointing up and some pointing down.

Add Detergent

NOTE: If you do not plan to run a wash cycle soon, run a rinse

cycle. Do not use detergent.

• Use automatic dishwasher detergent only. Add powder, liquid

or tablet detergent just before starting a cycle.

Upper rack Lower rack

Make sure nothing keeps spray arm(s) from

spinning freely. It is important for the water

spray to reach all soiled surfaces.

Freshautomatic

dishwasherdetergent

resultsinbetter

cleaning.Storetightly

closeddetergent

containerinacool,dry

place.

NOTE: For most water conditions, the

factory setting of 2 will give good

results. If you have hard water or notice

rings or spots, try a higher setting. Turn

the arrow adjuster inside the dispenser

by either using your fingers or inserting

a flat-blade screwdriver into the center

of the arrow and turning.

A. Cover latch

B. Main Wash section

C. Pre-Wash section

• The amount of detergent to use depends on:

How much soil remains on the items - Heavily soiled loads

require more detergent.

The hardness of the water - Ifyou use too little in hard water,

dishes won't be clean. If you use too much in soft water,

glassware will etch.

Soft to Medium Water (0-6 grains per U.S. gallon)

[typical water softener water and some city water]

Medium to Hard Water (7-12 grains per U.S. gallon)

[well water and some city water]

• Depending on your water hardness, fill the Main Wash section

of the dispenser as shown. Fill the Pre-Wash section to the

level shown, if needed.

NOTE: Fill amounts shown

are for standard powdered

detergent. Follow instructions

on the package when using

other dishwasher detergent.

HardWater

Soft Water

HardWater

SoftWater

MainWash Pre-Wash

Add Rinse Aid

Your dishwasher is designed to use rinse aid for good drying

performance. Without rinse aid your dishes and dishwasher

interior will have excessive moisture. The heat dry option will

not perform as well without rinse aid.

Rinse aid keeps water from forming droplets that can

dry as spots or streaks. They also improve drying by

allowing water to drain off of the dishes after the final

rinse.

• Rinse aid helps to reduce excess moisture on the

dish racks and interior of your dishwasher.

• Check the rinse aid indicator. Add rinse aid when indicator

drops to "Refill" level.

• To add rinse aid, turn the dispenser cap Lock

to "Refill" and lift off. Pour rinse aid into

the opening until the indicator level is at

"Full." Replace the dispenser cap and

turn to "Lock." Make sure cap is fully

locked.

Full

Add

Refill

turn to lock

Select a Cycle (cycles vary by model)

See "Cycle and Option Descriptions" charts inthe following

section.

Heavier cycles and options affect cycle length. Some cycles and

options will take up to 31/2hours to complete.

EVERYDAY CYCLES

ENTERTAINMENT CYCLES __

Select Options (options vary by model)

See "Cycle and Option Descriptions" charts in the following

section.

You can customize your cycles by pressing the options desired.

OPTIONS

STEP 4

Start or Resume a Cycle

• Run hot water at the sink nearest your

dishwasher until the water is hot. Turn off water. Start/

Resume

• Press START/RESUME and close the door

within 3 seconds. The door latches automatically. Press

START/RESUME to repeat the same cycle and options as in the

previous wash cycle.

• You can add an item anytime before the main wash starts.

Open the door slowly and add the item. Press START/RESUME

and close the door within 3 seconds.

]VERYDAYCYCLES ENTERTAINMENTCYCLES -- OPTIONS

Control Lock

This information covers several different models. Your dishwasher may not have all of the cycles and options described.

FSZq

CYCLES DISH LOAD TYPES DESCRIPTIONS

WASH TIME (HH:MM)

Cycle Cycle +

Minimum Options

Minimum

*Maximum

, , use for any loads With heavY, Designed to seleCt the number of water 2:1i 2:35 3:07

Sensor norma or ight amounts of fills best suited for the soil level of each

Wash foodsoil, load.

Use for hard-to-clean, heavily This cycle forces maximum time, water

Heavy ] soiled pots, pans, casseroles, and heat.

Wash J and regular tableware.

1:39 2:09 3:30

use for loads With normal The energy_usage label isbased Onthis ! :! i ! :4i 3:30

Normal I amounts of food soil. cycle. During the wash the wash action

Wash repeate(_!y pause for severa! secondsl

Use for lightly soiled items or

China! I china and crystal.

Crystal

During the wash, the wash action will

repeatedly pause for several seconds.

1:17 1:47 2:51

, When YoUneed fast results, This CYc!edoes not dry: For improved 0:58 0:880:88

1Hour I the 1Hour Wash will clean drying, select the Heated Dry oPtion,

Wash J yourdishes using slightly adding _/2hour to the wash cyc!el

more water and energy.

I PlateWarmer I

Use for loads of clean plates

and keep food warm longer

by serving it on a heated

plate.

The Plate Warmer cycle will heat 12 clean

dinner plates to a warm temperature.

Remember when removing the items

from the dishwasher they will still be

warm.

0:37 0:37 0:37

You can customize your cycle by selecting an option.

See option selections. If you change your mind, press the option again to turn off the option, or select a different option. You can change

an option anytime before the selected option begins.

*Maximum wash times depend on water temperature, heavy soil condition, dish load size and options selected.

OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:

use for small Ioadsl For added convenience: use for washing a small load sensor Wash, HeavY

Top I dishes in the t0p rack, wash; N°rmal Wash;

/ Rack I China/Crystal or 1-Hour

L J

Wash

SteamClean ]

Use for loads with normal

amounts of soil.

The Steam option adds steam to the cycle. This option

raises the water temperature in the final rinse to

approximately 155°F (68°C). The option adds heat and time

to the cycle.

Heavy Wash or Normal

Wash cycle.

Loads containing toUgh, increases the target watei temperature during the Wash HeaW Wash oi Noima i

baked-° n f°°d! P°Ai°ns 0f the cyc!e. Wash cYCle

Adds heat, wash time and water to the cycle.

OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:

Sanitize l

Tosanitize your dishes and

glassware in accordance

with NSF/ANSI Standard

184 for Residential

Dishwashers.

Raises the water temperature in the final rinse to

approximately 155°F (68°C). This high temperature rinse

sanitizes your dishes and glassware in accordance with

NSF/ANSI Standard 184 for Residential Dishwashers.

Certified residential dishwashers are not intended for

licensed food establishments.

The Sanitize or Sani Rinse option adds heat and time to the

cycle.

Normal Wash cycle.

Heavy Wash cycle

automatically uses

Sanitize. Only these

sanitization cycles have

been designed to meet

the NSF/ANSI

requirements.

For best drying results, drY Turn OFF When loads contain plastic dinnerware that may be All cYClesl Automatic

I Heated I dishes with heat: sensitivet° high temPe!atu!es! with al! wash cycles

Dry _ unless you turn It off

I I This option with the use of rinse aid will provide the best"

drying performance.

I 4 HourDelay I

To run your dish washer at Delays the start of a cycle up to 4 hours.

a later time or during off- Select a wash cycle and options. Press 4 HOUR DELAY.

peak hours. Press START/RESUME. Close the door firmly.

All cycles.

c0ntrol Lock To avoid Unintended use of To turn on Lock:, press and hold HEATED DRY forat least Anytime

your dishwasher, or cycle 4 seconds.

and opt on changes dur ng

Heated,-, I , ! " To turn off Locki press and hold HEATED DRY for at least

Dry _ a cyc e

I I ' 4 seconds,

when Control Lock is lit ai! buttons are disabled, if you press

any pad whi!e your dishwasher is locked, the light f ashes

3 timesl The dishwasher do0r can be 0pened wh le the

controls are locked.

IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the

cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle

will automatically compensate by adding time, heat and water as needed.

CYCLE STATUS

CONTROL PURPOSE COMMENTS

I To start or resume a if the dOor is opened during a cYcle or the power is interrUpted, the StartJResUme indicatoi

Start/ / wash cycle flashes. The cycle will not resume until the START/RESUME button is pushed and the door is

Resume J cloSed Within 3 seconds.

To cancel wash Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher

Cancel cycle drain completely.

=. To follow the The Clean indicator glows When a CYcle is finished.

m C°_i[°i_°ck progress 0f your If You select the Sanitize option; when the Sani Rinse Cycle is finished, the Sanitize indicator

alsnwasner CyCle

Clean glows. Ifyour dishwasher did not properly sanitize your dishes, the light flashes at the end of the

cyc!e, This can happen if the cycle is interruPted, or the water could not be heated to the required

temperature i The light goes off when you open and c!ose the door or press CANCEL

Your Jenn-Air dishwasher may have some or all of these features.

Adjustable 2-Position Upper Rack

You can raise or lower the upper rack to fit tall items inthe upper or

bottom rack. Adjusters are located on each side of the upper rack.

Each adjuster has 2 preset positions. The high and low positions

are marked on the adjuster.

To raise the rack, press both rack adjusters and lift the rack until it

is in the Up position and level.

To lower the rack,

press both rack

adjusters and slide the

rack back to its lower

position.

NOTE: The upper rack

must be level.

To replace the rack:

1. Gently pull rack tracks forward in dishwasher until they stop

and click into place.

2. To open track stops, flip the track stop to the outside of the

track.

3. Place the back rack rollers on each side of the rack into the

track slot and roll the rack back into the tracks.

4. Insert front rack rollers on each side of the rack into the rack

slots.

5. Close track stops on both sides of rack and slide rack back

into dishwasher.

Light Item Clips

The light item clips hold lightweight plastic items

such as cups, lids, or bowls in place during

washing.

To move a clip:

1. Pull the clip up and off the tine.

2. Reposition the clip on another tine.

Removable Upper Rack

The removable rack allows you to A

wash larger items such as stock

pots, roasters, and cookie sheets

in the lower level rack.

IMPORTANT: Remove dishes

prior to removing the mid level

rack from dishwasher.

To remove the rack: A. Trackstop

1. To access track stops, pull the B.Track

rack forward until it stops and

clicks into place.

2. To open track stops, flip the track stop to the outside of the

track.

3. After opening both track stops, slide front wheels up and out

of the slot in track. Continue to pull rack forward in track and

slide the back wheels up and out of the track.

4. Close track stops.

5. Slide rack tracks back into dishwasher.

Fold-down Tines

The row of tines on the left-hand and

right-hand sides of the upper rack

can be adjusted to make room for a

variety of dishes.

To adjust the fold-down tines:

1. Grasp the tip of the tine that is in

the tine holder.

2. Gently push the tine out of the

holder.

3. Lay the tines down, toward the

center of the rack.

Yourdishwasherhasthelatesttechnologyindishwasherfiltration.Thistriplefiltrationsystemminimizessoundandoptimizeswaterand

energyconservationwhileprovidingsuperiorcleaningperformance.Throughoutthelifeofyourdishwasher,thefilterwillrequire

maintenancetosustainpeakcleaningperformance.

Thetriplefiltersystemconsistsof2parts,anupper

filterassemblyandalowerfilter.

• Theupperfilterassemblykeepsoversizeditems

andforeignobjects,alongwithveryfinefood

particles,outofthepump.

• Thelowerfilterkeepsfoodfrombeingrecirculated

ontoyourdishware.

Thefiltersmayneedtobecleanedwhen:

• VisibleobjectsorsoilsareontheUpperFilter

Assembly.

• Thereisdegradationincleaningperformance(that

is,soilsstillpresentondishes).

• Dishesfeelgrittytothetouch.

Itisveryeasytoremoveandmaintainthefilters.The

chartbelowshowstherecommendedcleaning

frequency.

Locating

Tabs

pill

Lower Filter

Number of Loads If you wash If you scrape and rinse If you only scrape

Per Week before loading before loading before loading*

1 '3 ' Once per year Once per year Twice per year ........................................

4-7 once per year Once per year Twice per year

i i

8-12 Once per year Twice per year Every three months

13-14 Once per year Twice per year Every three months

If you do not scrape or rinse

before loading

EverY two months

Once per month

Every two weeks

Once per week

*Manufacturer's recommendation: This practice will conserve the water and energy that you would have used to prepare your dishes. This

will also save you time and effort.

Very Hard Water

Ifyou have hard water (above 15 grains), clean your filter at least

once per month. Building up of white residue on your dishwasher

indicates hard water. For tips on removing spots and stains, see

"Troubleshooting" section.

Filter Removal Instructions

1. Turn the Upper Filter

Assembly 1¼turn

counterclockwise and lift

out.

2. Grasp the Lower Filter in

the circular opening, lift

slightly, and pull forward to

remove.

3. Clean the filters as shown

below.

tab

Cleaning Instructions

IMPORTANT: Do not use wire brush, scouring pad, etc., as they

may damage the filters.

Rinse filter under running water until most soils are removed. Ifyou

have hard-to-remove soils or calcium deposits from hard water, a

soft brush may be required.

To remove Upper Filter Assembly

Filter Reinstallation Instructions

Noting the previous

illustrations, place the

Lower Filter under the

Locating Tabs in the

bottom of the dishwasher

so the round opening for

the Upper Filter Assembly

lines up with the round

opening in the bottom of

the tub.

tab

To replace Upper Filter Assembly

Insert the Upper Filter Assembly into the circular opening in

the Lower Filter.

Slowly rotate the filter clockwise until it drops into place.

Continue to rotate until the filter is locked into place. If the

filter is not fully seated (still turns freely), continue to turn

the filter clockwise until it drops and locks into place.

NOTE: The Upper Filter Assembly arrow does not have to

align with the arrow in the Lower Filter as long as the filter is

locked.

IMPORTANT: To avoid damage to dishwasher, do not operate your

dishwasher without the filters properly installed. Be sure the Lower

Filter is securely in place and the Upper Filter Assembly is locked

into place. If the Upper Filter Assembly turns freely, it is not locked

into place.

Cleaning the Dishwasher

Clean the exterior of the dishwasher with a soft, damp cloth and

mild detergent. If your dishwasher has a stainless steel exterior, a

stainless steel cleaner is recommended - Stainless Steel Cleaner

and Polish Part Number 31462.

Clean the interior of the dishwasher, with a paste of powdered

dishwasher detergent and water or use liquid dishwasher detergent

on a damp sponge to clean the cooled-down interior.

A white vinegar rinse may remove white spots and film. Vinegar is

an acid, and using it too often could damage your dishwasher.

Put 2 cups (500 mL) white vinegar in a glass or dishwasher-safe

measuring cup on the bottom rack. Run the dishwasher through a

complete washing cycle using an air-dry or an energy-saving dry

option. Do not use detergent. Vinegar will mix with the wash water.

If you have a drain air gap,

check and clean it if the

dishwasher isn't draining _,-

well.

Storing the Dishwasher

If you will not be using the dishwasher during the summer months,

turn off the water and power supply to the dishwasher. In the

winter, if the dishwasher could be exposed to near freezing

temperatures or is left in aseasonal dwelling such as a second

home or vacation home, avoid water damage by having your

dishwasher winterized by authorized service personnel.

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

Inthe U.S.A., www.jennair.com In Canada, www.jennair.ca

Dishwasher is not operating properly

• Dishwasher does not run or stops during a cycle

Is the door closed tightly and latched? Press START/RESUME

and close the door within 3 seconds.

Is the right cycle selected?

Is there power to the dishwasher? Has a household fuse blown,

or has a circuit breaker tripped? Replace the fuse or reset the

circuit breaker. If the problem continues, call an electrician.

Has the motor stopped due to an overload? The motor

automatically resets itself within a few minutes. If it does not

restart, call for service.

Is the water shutoff valve (if installed) turned on?

It is normal for certain cycles to repeatedly pause for several

seconds during the main wash.

• The Clean light isflashing

Check the following:

• Is the overfill protection float able to move up and down

freely? Press down to release.

• Be sure the water supply is turned on to the dishwasher.

(This is very important following the new installation of

your dishwasher.)

• Check for suds in the dishwasher. If foam or suds are

detected by the dishwasher sensing system, the

dishwasher may not operate properly or may not fill with

water.

Suds can come from:

1. Using the incorrect type of detergent, such as

laundry detergent, hand soap, or dish detergent for

hand washing dishes.

2. Forgetting to replace the rinse aid dispenser cap

after filling (or refilling) the rinse aid.

3. Using an excessive amount of dishwasher detergent.

• Dishwasher will not fill

Is the overfill protection float able to

move up and down freely? Press down

to release.

Dishwasher seems to run too long

Try the 1 Hour Wash cycle.

The dishwasher can run up to 31/2hours depending on soil

level, water temperature, cycles and options.

Is the water supplied to the dishwasher hot enough? The

dishwasher runs longer while heating water.

Is the dishwasher cycle time within the cycle times? See cycle

sections wash times. A delay automatically occurs in some

wash and rinse cycles until the water reaches the proper

temperature.

This dishwasher is equipped with an optical sensor wash that

detects water temperature, soil and detergent amount. Wash

cycles are adjusted based on what is sensed.

IMPORTANT:Theveryfirstwashcycleafterinstallationinyour

homewillbeadjustedtoincludeanadditional2rinses.This

cyclemustnotbeinterruptedforpropersensoradjustment.If

thisadjustmentcycleiscanceledorstoppedbeforetheClean

lightcomesonattheendofthecycle,thenextwashcyclewill

repeatthissensoradjustment.

Waterremainsinthedishwasher

Isthecyclecomplete?

Wasthedisposerknockoutplugremovedduringinstallation?

(See"Installthedrainhose"sectionintheInstallation

Instructions.)

• Detergent remains in the covered section of the dispenser

Is the cycle complete?

Check for items such as cookie sheets, cutting boards, or large

containers that may be blocking the detergent dispenser from

opening properly.

Be sure the cycle has finished (green light is on). If it has not

finished, you will need to resume the cycle by pressing START/

RESUME and closing the door within 3 seconds.

Is the detergent lump-free? Replace detergent if necessary.

• White residue on the front of the access panel

Was too much detergent used?

Is the brand of detergent making excess foam? Try a different

brand to reduce foaming and eliminate buildup.

• Odor in the dishwasher

Are dishes washed only every 2 or 3 days? Run a rinse cycle

once or twice a day until you have a full load.

Does the dishwasher have a new plastic smell? Run a vinegar

rinse as described in "Dishwasher Care."

Condensation on the kitchen counter (built-in models)

Is the dishwasher aligned with the countertop? Moisture from

the vent in the dishwasher console can form on the counter.

Refer to the Installation Instructions for more information.

Dishes do not dry completely

• Dishes do not dry completely

Did you use a rinse aid? Your dishwasher is designed to use

rinse aid for good drying performance. Without rinse aid your

dishes and dishwasher interior will have excessive moisture.

The heat dry option will not perform as well without rinse aid.

• Dishes are not dry

Did you load your dishwasher to allow proper water drainage?

Do not overload. Use a liquid rinse aid to speed drying.

Are the plastics wet? Plastics often need towel drying.

Is the rinse aid dispenser empty?

Did you use an air-dry or energy-saving dry option? Use a

heated drying option for dryer dishes.

• Excess moisture on racks and dishwasher interior

Check the rinse aid indicator to see that there is rinse aid in the

dispenser.

Spots and stains on dishes

Spotting and filming on dishes

Is your water hard, or is there a high mineral content in your

water? Conditioning the final rinse water with a liquid rinse aid

helps eliminate spotting and filming. Keep the rinse aid

dispenser filled. Always use a high-temp option. Ifyour water

hardness is 13 grains or above, it is strongly recommended that

you install a home water softener. If you do not wish to drink

softened water, have the softener installed onto your hot water

supply.

Is the water temperature too low? For best dishwashing results,

water should be 120°F (49°C) as it enters the dishwasher.

Did you use the correct amount of effective detergent? Use

recommended dishwasher detergents only. Do not use less

than 1 tbs (15 g) per load. Detergent must be fresh to be

effective. Heavy soil and/or hard water generally require extra

detergent.

Is the home water pressure high enough for proper dishwasher

filling? Home water pressure should be 20 to 120 psi (138 to

828 kPa) for proper dishwasher fill. If you have questions about

your water pressure, call a licensed, qualified plumber.

NOTE: To remove spots and film from glassware, remove all

silverware and metal items and run avinegar rinse as described

in "Dishwasher Care."

Silica film or etching (silica film is a milky, rainbow-colored

deposit; etching is a cloudy film)

Sometimes there is a water/chemical reaction with certain

types of glassware. This is usually caused by some

combination of soft or softened water, alkaline washing

solutions, insufficient rinsing, overloading the dishwasher, and

the heat of drying. It might not be possible to avoid the

problem, except by hand washing.

To slow this process use a minimum amount of detergent but

not less than 1 tbs (15 g) per load. Use a liquid rinse aid and

underload the dishwasher to allow thorough rinsing. Silica film

and etching are permanent and cannot be removed. Do not use

heated drying.

White spots on cookware with nonstick finish

Has the dishwasher detergent removed cookware seasoning?

Reseason cookware after washing it in the dishwasher.

• Brown stains on dishes and dishwasher interior

Does your water have high iron content? Rewash dishes using

1-3 tsp (5-15 mL) of citric acid crystals added to the covered

section of the detergent dispenser. Do not use detergent.

Follow with a Normal wash cycle with detergent. If treatment is

needed more often than every other month, the installation of

an iron removal unit is suggested.

• Black or gray marks on dishes

Are aluminum items rubbing dishes during washing?

Disposable aluminum items can break down in the dishwasher

and cause marking. Hand wash these items. Remove

aluminum markings by using a mild abrasive cleaner.

• Orange stains on plastic dishes or dishwasher interior

Are large amounts of tomato-based foods on dishes placed in

the dishwasher? It may be necessary to use a stain removal

product to remove stains from your dishwasher. Stains will not

affect dishwasher performance.

Noises

Grinding, grating, crunching or buzzing sounds

A hard object has entered the wash module (on some models).

When the object is ground up, the sound should stop. If the

noise persists after a complete cycle, call for service.

Dishes are not completely clean

• Food soil left on the dishes

Is the dishwasher loaded correctly?

Did you choose the cycle that describes the most difficult soil in

your dishwasher? If you have some items with heavier soils,

use a heavier cycle.

Is the water temperature too low? For best dishwashing results,

water should be 120°F (49°C) as it enters the dishwasher.

Did you use the correct amount of fresh detergent? Use

recommended dishwasher detergents only. Do not use less

than 1 tbs (15 g) per load. Detergent must be fresh to be

effective. Heavy soil and/or hard water generally require extra

detergent.

Is detergent caked in dispenser? Use fresh detergent only. Do

not allow detergent to sit for several hours in a wet dispenser.

Clean dispenser when caked detergent is present.

Is the pump or spray arm clogged by labels from bottles and

cans?

Is the home water pressure high enough for proper dishwasher

filling? Home water pressure should be 20 to 120 psi (138 to

828 kPa) for proper dishwasher fill. Ifyou have questions about

your water pressure, call a licensed, qualified plumber.

Are high suds slowing the wash arm? Do not use soap or

laundry detergents. Use recommended dishwasher detergents

only.

• Dishes in the PROSCRUB _wash area are not clean

Are the dishes loaded to face the PROSCRUB _spray jets?

Load soiled dish surfaces to face the back of the dishwasher

toward the PROSCRUB _ spray jets. Tilt the dishes toward the

back so water can drain from surfaces, and the lower spray

arm can wash the item from below.

NOTE: Loaded items may shift when dish racks are pushed

into the dishwasher. Make sure dishes do not interfere with the

spray arms, water feed tube, or PROSCRUB _spray jets.

Are items loaded so they do not overlap? Load items only one

row deep without any overlap so that the PROSCRUB _spray

jets can reach all surfaces.

Dishes are damaged during a cycle

Chipping of dishes

Did you load the dishwasher properly? Load the dishes and

glasses so they are stable and do not strike together from

washing action. Minimize chipping by moving the rack in and

out slowly.

NOTE: Antiques, feather-edged crystal, and similar types of

china and glassware might be too delicate for automatic

dishwashing. Wash by hand.

JENN-AIR DISHWASHERWARRANTY

ONE YEAR LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or

furnished with the product, Jenn-Air brand of Maytag Corporation or Maytag Limited (hereafter "Jenn-Air") will pay for factory specified

replacement parts and repair labor to correct defects in materials or workmanship. Service must be provided by a Jenn-Air designated

service company. This limited warranty applies only when the major appliance is used in the country in which it is purchased.

SECOND THROUGH FIFTH YEAR LIMITED WARRANTY ON CERTAIN COMPONENT PARTS

In the second through the fifth year from the date of purchase, when your major appliance is installed, operated and maintained according

to instructions attached to or furnished with the product, Jenn-Air will pay for factory specified parts for the following components if

defective in materials or workmanship: dish racks, all parts of the wash system, drain motor, electronic controls and heating element.

Replacements parts will also be provided if there is rust including the exterior cabinet and front panels.

LIFETIME LIMITED WARRANTY ON STAINLESS STEEL TUB AND INNER DOOR LINER

For the lifetime of the product from the date of purchase, when this major appliance is installed, operated and maintained according to

instructions attached to or furnished with the product, Jenn-Air will pay for factory specified parts and repair labor for the following

components to correct defects in materials or workmanship that existed when this major appliance was purchased: stainless steel tub

and inner door liner.

ITEMS JENN-AIR WILL NOT PAY FOR

1. Service calls to correct the installation of your major appliance, to instruct you how to use your major appliance, to replace or repair

house fuses or to correct house wiring or plumbing.

2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Those consumable parts are excluded from warranty

coverage.

3. Repairs when your major appliance is used for other than normal, single-family household use.

4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance

with electrical or plumbing codes, or use of products not approved by Jenn-Air.

5. Replacement parts or repair labor costs for units operated outside the United States or Canada.

6. Pickup and delivery. This major appliance is designed to be repaired in the home.

7. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

8. Expenses for travel and transportation for product service in remote locations.

9. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not installed in accordance with

published installation instructions.

10. Replacement parts or repair labor costs when the major appliance is used in a country other than the country in which it was

purchased.

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A

PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do

not allow limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This

warranty gives you specific legal rights, and you also may have other rights that vary from state to state or province to province.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.

JENN-AIR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the

exclusion or limitation of incidental or consequential damages, so these limitations and exclusion may not apply to you. This warranty

gives you specific legal rights, and you also may have other rights that vary from state to state or province to province.

Outside the 50 United States and Canada, this warranty does not apply. Contact your authorized Jenn-Air dealer to determine if another

warranty applies. 2/1o

For additional product information, in the U.S.A., visit www.jennair.com. In Canada, visit www.jennair.ca.

Ifyou do not have access to the Internet and you need assistance using your product or you would like to schedule service, you may

contact Jenn-Air at the number below.

Have your complete model number ready. You can find your model number and serial number on the label located near the door on the

right-hand or left-hand side of the dishwasher interior.

For assistance or service in the U.S.A., call 1-800-688-1100. In Canada, call 1-800-807-6777.

Ifyou need further assistance, you can write to Jenn-Air with any questions or concerns at the address below:

In the U.S.A.: In Canada:

Jenn-Air Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

Jenn-Air Brand Home Appliances

Customer eXperience Center

200--6750 Century Avenue

Mississauga, Ontario L5N 0B7

Please keep these User Instructions and model number information for future reference.

W10300216A

SP PN W10300217A

4/10

Printed in U.S.A.

Nous vous REMERCIONS d'avoir achete ce produit de haute qualite. Si vous rencontrez un probleme non mentionne dans la

section DI_PANNAGE,veuillez visiter notre site www.jennair.com pour des informations supplementaires. Si vous avez toujours

besoin d'assistance, veuillez nous tel6phoner au 1-800-688-1100. Au Canada, visitez notre site www.jennair.ca ou tel6phonez-

nous au 1-800-807-6777.

Vous aurez besoin de vos num@os de modele et de s@ie situes pres de la porte sur le c6te droit ou gauche, A I'int@ieurdu

lave-vaisselle.

Tabledes mali res

SECURITE DU LAVE-VAISSELLE ............................................. 1

E'TAPES RAPIDES ...................................................................... 3

UTILISATION DU LAVE-VAISSELLE ........................................ 3

DESCRIPTION DES PROGRAMMES ET DES OPTIONS ....... 5

CARACTERISTIQUES DU LAVE-VAISSELLE .......................... 7

SYSTEME DE FILTRATION ....................................................... 8

ENTRETIEN DU LAVE-VAISSELLE .......................................... 9

DEPANNAGE .............................................................................. 9

GARANTIE ................................................................................ 12

_ ,_ _ 4

Votre securite et celle des autres est tres importante.

Nous donnons de nombreux messages de s_curit_ importants dans ce manuel et sur votre appareil m_nager. Assurez-vous de

toujours lire tousles messages de s_curit_ et de vous y conformer.

Voici le symbole d'alerte de s_curit_.

Ce symbole d'alerte de s_curit_ vous signale les dangers potentiels de d_c_s et de blessures graves a vous

eta d'autres.

Tous les messages de s_curit_ suivront le symbole d'alerte de s_curit_ et le mot "DANGER" ou

"AVERTISSEMENT". Ces mots signifient •

Risque possible de d_cbs ou de blessure grave si vous ne

suivez pas imm_diatement les instructions.

Risque possible de d_cbs ou de blessure grave si vous

ne suivez pas les instructions.

Tous les messages de s_curit_ vous diront quel est le danger potentiel et vous disent comment r_duire le risque de blessure et

ce qui peut se produire en cas de non-respect des instructions.

W10300216A

IMPORTANTES INSTRUCTIONS DE SI_CURITI_

AVERTISSEMENT : Lors de I'utilisation du lave-vaisselle, suivre les precautions el6mentaires dont les suivantes :

[] Lire la totalite des instructions avant d'utiliser le

lave-vaisselle.

[] N'utiliser le lave-vaisselle que pour laver la vaisselle.

[] Utiliser uniquement les detersifs ou agents de rin(;age

recommandes pour lave-vaisselle et les garder hors de la

portee des enfants.

[] Lorsque vous chargez le lave-vaisselle :

1) Placer les objets coupants de fa(;on qu'ils ne puissent

endommager le joint de la porte; et

2) Placer les couteaux le manche vers le haut de fa(;on & ne

pas vous couper.

[] Ne pas laver d'articles en plastique & moins qu'ils nesoient

marques "Peut aller au lave-vaisselle" ou I'equivalent. Si

I'article ne porte aucune indication, verifier aupres du

fabricant.

[] Ne pas toucher I'el6ment chauffant pendant le

fonctionnement ou immediatement apr_s.

[] Ne pas faire fonctionner le lave-vaisselle si tous les

panneaux de I'enceinte ne sont pas en place.

[] Ne pas jouer avec les commandes.

[] Ne pas abuser, vous asseoir ni monter sur la porte,

le couvercle ou les paniers du lave-vaisselle.

[] Pour eviter tout risque d'accident, ne pas laisser les

enfants jouer dans ou sur le lave-vaisselle.

[] Sous certaines conditions, de I'hydrogene peut se former

dans un reseau d'eau chaude inutilise depuis deux

semaines ou plus. L'HYDROG#NE EST UN GAZ

EXPLOSIBLE. Si le systeme d'eau chaude n'a pas et6

utilise depuis un certain temps, laisser couler I'eau chaude

des robinets pendant quelques minutes avant de faire

fonctionner le lave-vaisselle. Cette mesure permettra &

I'hydrogene de s'evaporer. Ce gaz etant inflammable, ne

pas fumer ni utiliser de flamme nue pendant cette periode.

[] Enlever la porte ou le couvercle du compartiment de lavage

Iorsque vous remplacez ou mettez au rebut un vieux

lave-vaisselle.

CONSERVEZ CES INSTRUCTIONS

iNSTRUCTiONS DE MISE A LA TERRE

Pour un lave-vaisselle reli6 & la terre, branch6 avec un

cordon :

Le lave-vaisselle dolt etre relie& la terre. En cas d'un

mauvais fonctionnement ou d'une panne, la raise & terre

reduira le risque d'un choc electrique en fournissant le moins

de resistance pour le courant electrique. Le lave-vaisselle est

equipe d'un cordon avec un conducteur pour relier les

appareils & la terre et d'une fiche de raise & la terre. La fiche

doit etre branchee sur une prise appropriee, installee et reliee

& la terre conformement aux codes et reglements Iocaux.

AVERTiSSEMENT : La connexion incorrecte du

conducteur pour relier les appareils & la terre peut causer le

risque de choc electrique. Verifier avec un electricien

competent ou un representant de service si vous avez

des doutes si le lave-vaisselle est correctement relie &la

terre. Ne pas modifier la fiche fournie avec le lave-

vaisselle; si elle n'entre pas dans la prise, faire installer

une prise appropriee par un electricien competent.

Pour un lave-vaisselle branch_ en permanence :

Le lave-vaisselle doit etre branche & un systeme

d'installation electrique permanent en metal relie& la

terre, ou un conducteur pour relier les appareils & la terre

doit etre relie avec les conducteurs du circuit et branche

&une borne pour relier les appareils & la terre ou au

cordon d'alimentation electrique avec le lave-vaisselle.

CONSERVEZ CES INSTRUCTIONS

Risque de basculement

Ne pas utiliser le lave=vaisselle jusqu'a ce qu'il soit compl_tement installS.

Ne pas appuyer sur la porte ouverte.

Le non=respect de ces instructions peut causer des blessures graves ou des coupures.

Preparer et

charger le

lave-vaisselle.

Verser le

d_tergent pour le

nettoyage et

I'agent de ringage

pour le s_chage.

3 _lectionner un programme et une option.

(Les programmes et les options changent selon le

module.)

EVERYDAY CYCLES

ENTERTAINMENT CYCLES __

OPTIONS

_ Mettre en marche le lave-

_ vaisselle, start/

Resume

REMARQUE : Si le bouton Start/

Resume (mise en marche/reprise)

se trouve au sommet de la porte,

bien fermer la porte dans les

3 secondes qui suivent I'appui sur

la touche START/RESUME.

t sc£ o du s e

Preparation et chargement du lave-vaisselle

IMPORTANT : Enlever de la vaisselle les restes alimentaires, os,

cure-dents et autres articles durs. Enlever les etiquettes des

recipients avant de les laver.

Disposition pour service de 10 couverts

Panier sup_rieur Panierinf_rieur

Disposition pour service de 12 couverts

Panier sup_rieur

Panier inf_rieur

S'assurer que rien n'emp_che le(s) bras

d'aspersion de tourner librement. II est

important que lejet d'eau atteigne toutes

les surfaces sales.

• Verifier que Iorsque la porte du lave-vaisselle est fermee, aucun

article ne bloque le distributeur de detergent.

• Charger dans le panier les articles en orientant la surface sale

vers le bas et vers I'interieur, vers le bras d'aspersion, tel

qu'illustr& Ceci ameliorera les resultats de nettoyage et de

sechage.

• leviter le chevauchement d'articles tels que les bols ou les

assiettes pouvant retenir les aliments.

• Placer les articles de plastique, les petites assiettes et les

verres dans le panier superieur. Ne laver des articles de

plastique au lave-vaisselle que s'ils sont identifies comme

"lavable au lave-vaisselle".

Pour eviter les bruits de choc et d'entrechoc durant le

fonctionnement : Charger la vaisselle pour que les articles ne

se touchent pas les uns les autres. S'assurer que les articles

legers sont bien retenus dans les paniers.

Lors du chargement des couverts, toujours

charger les articles acer6s pointes vers le bas.

Orienter certains articles vers le haut et

d'autres vers le bas Iorsqu'on les place

ensemble.

I_TAPE 2

Ajout de d_tergent.

REMARQUE : Si vous n'avez pas I'intention d'effectuer un

programme de lavage dans I'immediat, executer un programme de

rin£_age.Ne pas utiliser de detergent.

• Utiliser uniquement du detergent pour lave-vaisselle

automatique. Verser le detergent en poudre, liquide ou en

pastille, juste avant de demarrer un programme.

• Pour I'obtention de

meilleurs resultats,

il est recommande

d'utiliser un

detergent & lave-

vaisselle

automatique frais.

Conserver le

recipient du

detergent bien

ferme dans un lieu

sec et frais.

A. Loquet du couvercle

B. Section de lavage principal

C. Section du pr_lavage

La quantite de detergent & utiliser depend des el6ments

suivants •

Degre de salete de la vaisselle - Les charges tr_s sales

necessitent plus de detergent.

Durete de I'eau - Si on n'utilise pas assez de detergent dans

une eau dure, la vaisselle ne sera pas parfaitement lavee. Si on

utilise trop de detergent dans une eau douce, la solution

attaquera les articles en verre.

Eau douce &moyenne (0 a 6 grains par gallon U.S.)

[eau venant d'un adoucisseur d'eau gen6ral et eau du

service d'eau de la ville]

Eau moyenne & dure (7 a 12 grains par gallon U.S.)

[eau de puits et du service d'eau de la ville]

• Selon la durete de I'eau, remplir la section de lavage principal

du distributeur tel qu'illustr& Remplir la section de prelavage

jusqu'au niveau indiqu6, si necessaire.

REMARQUE • Les quantites HardWater

indiqu6es correspondent a HardWater

I'emploi d'un detergent en s0ftwater softwater

poudre standard. Lors de

I'utilisation d'un autre Lavageprincipal Pr_lavage

detergent pour lave-vaisselle,

proceder conformement aux instructions indiqu6es sur

I'emballage.

Verser I'agent de ringage

Votre lave-vaisselle est con£_u pour utiliser un agent de rin£_age

pour un sechage satisfaisant. Sans agent de rin£_age,la

vaisselle et I'interieur du lave-vaisselle seront trop humides.

L'option de sechage avec chaleur ne fonctionnera pas de

maniere optimale sans agent de rin£_age.

• Les agents de rin£_ageempechent I'eau de former

des gouttelettes qui peuvent secher en laissant des _ Full

taches ou coulees. IIs ameliorent egalement le

sechage en permettant & I'eau de s'ecouler de la

vaisselle apr_s le rin£_agefinal.

• Les agents de rin(_age aident &reduire I'exces kW=JAdd

d'humidite sur les paniers & vaisselle et & I'interieur

du lave-vaisselle.

• Contr61er le niveau d'agent de rin£_agedans le distributeur.

Ajouter de I'agent de rin£_ageIorsque I'indicateur est au niveau

"Refill" (remplir).

Pour ajouter de I'agent de rin£:age,

tourner le bouchon du distributeur

vers "Refill" (remplissage) et le

soulever. Verser I'agent de rin(_age

dans I'ouverture jusqu'& ce que

I'indicateur soit sur "Full" (plein).

Remettre en place le bouchon du

distributeur et le tourner Vers "Lock"

(verrouillage). Verifier qu'il est bien

verrouill&

Lock

Refill__

tourpour verrouiller

REMARQUE : Pour une majorite de

types d'eau, le reglage effectue &

I'usine & 2 donnera de bons resultats.

Si I'eau du domicile est dure ou si on

remarque la presence d'anneaux ou

de taches, essayer un reglage plus

eleve. Tourner I'ajusteur & fleche &

I'interieur du distributeur soit a la main,

soit en inserant un tournevis & lame

plate au centre de la fleche et en tournant.

S_lectionner un programme (les programmes varient

selon les modules)

Voir les tableaux "Description des programmes et des options"

dans la section qui suit.

Les programmes plus intenses et les options modifient la duree du

programme. L'execution de certains programmes et options

prendra jusqu'& 3 heures et demie.

EVERYDAY CYCLES

ENTERTAINMENT CYCLES __

S_lectionner les options (les options varient selon le

module).

Voir les tableaux "Description des programmes et des options"

dans la section qui suit.

On peut personnaliser les programmes en appuyant sur les options

desirees.

OPTIONS

ETAPE 4

Commencer ou reprendre un programme

• Laisser I'eau couler du robinet le plus pres du

lave-vaisselle jusqu'& ce qu'elle soit chaude.

Fermer I'eau.

Start /

Resume

• Appuyer sur START/RESUME (mise en marche/reprise) dans

les 3 secondes qui suivent et fermer la porte. Le verrou de la

porte s'engage automatiquement. Appuyer sur START/

RESUME (mise en marche/reprise) pour reprendre le meme

programme et les memes options que Iors du programme de

lavage precedent.

• On peut ajouter un article a n'importe quel moment avant le

debut du lavage principal. Ouvrir la porte lentement et ajouter

I'article. Appuyer sur START/RESUME et fermer la porte dans

les 3 secondes qui suivent.

EVERYDAY CYCLES ENTERTAINMENT CYCLES -- OPTIONS _ Control Lock

Ces informations couvrent plusieurs modeles differents. Votre lave-vaisselle peut ne pas comporter tous les programmes et options

decrits.

PROGRAMMES TYPES DE CHARGE DE

VAISSELLE

DESCRIPTIONS

DURI_E DE LAVAGE (HH:MM)

Programme Programme + *Dur6e

minimum options maximu

minimum m

A uti!isei pour toUtes les congu pour s61ectionner !e nombre 2ill 2i35 3:07

Sensor charges ayant des quantit6s id6al de remplissages pour !e

Wash de salet6s importantes, niveau de salet6 de chaque charge.

norma!es ou !6g_res,

Heavy

Wash

Utiliser ce programme pour

les casseroles, les poeles et

la vaisselle ordinaire

difficiles a nettoyer et tr_s

sales.

Ce programme utilise la duree, le

volume d'eau et la chaleur

maximum.

1:39 2:09 3:30

Ut !iser ce pr0gramme pour L'6tiquette de consommation lill 1:41 3:30

des charges comportant d,6nergie est basee sur Ce

Wash des quantit6s normales de programme. Lors du lavage, Faction

debris alimentaires, de lavage fera des pauses r6p6t6es ..........................................................................

pendant que!ques secondes.

China/.

Crystal

Utiliser ce programme pour

les articles legerement sales

ou pour la porcelaine ou le

cristal.

Lors du lavage, I'action de lavage

fera des pauses repetees pendant

quelques secondes.

1:17 1:47 2:51

Lorsqu'on s0uhaite obtenir Ce programme n'effectue pas de 0:59 0:88 0:88

1Hour des r6sultats plus sechage. Pour un meilleur sechage

Wash rapidement, !'option Lavage s61ectionner !'option Heated Dry

en 1 heure consomme (s6chage avec cha eur)ajouter

leg_rement plus d eau et V2heure au programme de !avage.

d,6nergie.

Utilisation pour des charges Le programme de rechauffeur de 0:37 0:37 0:37

I Plate I de plats propres et pour plat chauffera 12 grandes assiettes

Warmer I garder les aliments chauds & temperature tiede. Ne pas oublier

plus Iongtemps en les que les articles sent encore chauds

servant dans un plat chaud. Iorsqu'on les retire du lave-vaisselle.

Vous pouvez personnaliser votre programme en selectionnant une option.

Voir les selections d'options. Si vous changez d'avis, appuyez sur cette option &nouveau pour la desactiver, ou selectionnez une option

differente si desire. Vous pouvez changer d'option en tout temps avant que I'option choisie ne commence.

*Les durees maximum de lavage dependent de la temperature de I'eau, de la salete, de la taille de la charge de vaisselle et des options

selectionnees.

OPTIONS TYPES DE CHARGE DE DESCRIPTIONS UTILISER AVEC :

VAISSELLE

..... uti!isation pour de petites Pour plus de commodit6, & utiliser p0ur laver une petite LaVage sensor (par

T, 1 charges, charge de plats dans le panier superieur, detection), Heaw Wash

Rack J (lavage intense), _lorma!

--- Wash (avage norma),

OPTIONS TYPES DE CHARGE DE DESCRIPTIONS UTILISER AVEC :

VAISSELLE

SteamClean

Utilisation pour des

charges avec des

quantites normales de

residus alimentaires.

L'option Steam (vapeur) ajoute de la vapeur au programme.

Lors du rin£;age final, cette option porte la temperature de

I'eau &environ 155°F (68°C). Cette option augmente le

niveau de chaleur et la duree du programme.

Heavy Wash (lavage

intense) ou Normal

Wash (lavage normal)

charges C0ntenant des Augmente la temp6rature cible de I'eau durant les 6tapes de Heavy Wash (lavage

Super [ aliments tenaces ayant lavage du programmel intense) ou Norma!

Sc;ubI adh6r6.& !a vaisse!leapr_s Augmente !e niveaU de chaleur, ia dur6e de !avage et !e wash (lavage no[ma!)

une CU!SS°nau T0UB volume d,eau du programmel

Sanitize ]

Pour assainir la vaisselle et

la verrerie conformement &

la norme 184 NSF/ANSI

pour lave-vaisselle

residentiels.

Lors du rin£;age final, la temperature de I'eau s'eleve &

environ 155°F (68°C). Ce rin£:age & haute temperature

assainit la vaisselle et la verrerie conformement & la norme

184 NSF/ANSI pour les lave-vaisselle residentiels.

Les lave-vaisselle residentiels certifies ne sont pas destines

aux etablissements alimentaires autorises.

L'option Sanitize (assainissement) ou Sani Rinse (rin£:age

sanitaire) augmente le niveau de chaleur et la duree du

programme.

Programme de Normal

Wash (llavage normal).

Le programme Heavy

Wash (lavage intense)

utilise automatiquement

Sanitize

(assainissement). Seuls

ces programmes

d'assainissement ont

ete con£:us pour

repondre aux exigences

de la norme NSF/ANSI.

S6chage aVec Chaleui ARRC:TER le laVe*VaisSelle qUand ia charge c0ntient dela Tousles programmesl

Heated,, pour les me Ileurs r6su!tats vaisselle en plastique qui peut 6tre sensible & des Automatique avec tous

Dry _ de s6chagel temp6ratures 61ev6es. les programmes de

avage & mo'ns qu'on ne

............................................................... Cetteoptionavec utilisationdunagentderingagefournira, ^. ..........

arre[e

!e meil!eur rendement de sechage,

4 Hour

Delay

Selectionner ce

programme pour faire

fonctionner votre lave-

vaisselle plus tard ou en

dehors des heures de

pointe.

Differe la mise en marche d'un programme jusqu'& 4 heures.

Choisir un programme de lavage et les options. Appuyer sur

4 HOUR DELAY (mise en marche differ6e). Appuyer sur

START/RESUME (mise en marche/reprise). Bien fermer la

porte.

Tousles programmes.

Verrouillage Pour 6viter une uti!isation Pour veir0uil er, appuyer sur HEATED DRY pendant au moinS En tout temps

des involontaire du lave. 4 secondes.

commandes va sse e, ou un

i _ P0ur deVerrouiller, appuyer sur HEATED DRY pendant au

cnangement de.roclramr OLd tion mo ns 4 secondes

Heated_[ pr ga me u op

Dry t_ pendant un programme Lorsque I indicateur Control Lock (verrouillage)est allum6

tous les boutons sont d6sactiv6s, Lorsqu,on appuie sur une

touche alors que les commandes du lave-vaissel e sont

verrouill6es, Iindicateur lumineux c!ignote 3 lois. On peut

0uwir la porte du !avewa sselle 10rsque !es commandes sont

verrouill6es

IMPORTANT : Le detecteur incorpore au lave-vaisselle contr61e le degre de salet& La duree du programme et/ou la consommation d'eau

peuvent varier etant donne que le detecteur rajuste le programme pour assurer des performances de lavage optimales. Si la temperature

de I'eau d'arrivee est inferieure & celle recommandee ou que la vaisselle est tres sale, le programme compensera automatiquement en

allongeant la duree du programme et en augmentant la quantite d'eau et de chaleur, au besoin.

COMMANDES ET

TI_MOINS DE

PROGRAMME

COM- ROLE COMMENTAIRES

MANDE

Pour commencer ou Si I'on ouvre la porte durant un programme ou si si une panne de courant se produit, le temoin

Start/ reprendre un lumineux Start/Resume (mise en marche/reprise) clign0te. Le programme ne reprend pas avant

Resume programme de que on a t appuy6 sure bouton START/RESUME (mse en marche!repr se) et que a porte at 6t6

!avage ferm6e dans !es 3 secondes qui suivent.

Cancel

Pour annuler un

programme de

lavage

Fermez la porte fermement. Le lave-vaisselle commence une vidange de 2 minutes (si

necessaire). Laissez le lave-vaisselle vidanger completement.

COM- ROLE COMMENTAIRES

MANDE

Pour suivre la L'indicateur Clean (propre) s'allume Iorsqu'un programme est terrain&

m Contro ock • --

m SontzeJ p_og_e_n au i _i;_ Si vous s6 ectionnez !.option Sanitize (assainissement) Io_sque !e programme Sanitize est

"u cooo ,_.u._._,,,._ u_ Z.-_._ terrain6 le t6moin Sanitized s'allumel Si le lave:vaisselle n'a pas assaini a vaisselle comme il

!ave-va!sse!! e convient, le t6moin clignote & latin du Programmel ceci peut se produire Iorsque le programme

est interrompu, ou si Ieau n a pas pu 6tre chauff6e & !atemp6rature s0uhait6e. Le t6moin s 6teint

?otre lave-vaisselle Jenn-Air peut comporter toutes ces caract_ristiques ou seulement certaines d'entre elles.

Panier sup_rieur r_glable a 2 positions

On peut lever ou baisser le panier JntermedJaire pour mettre de

grands articles dans le panier superieur ou inferieur. Les regleurs

sent situ6s de chaque c6te du panier superieur. Chaque regleur

comporte 2 positions prer6gl6es. Les positions hautes et basses

sent indiqu6es sur le regleur.

Pour soulever le panier, appuyer sur les deux regleurs du panier et

soulever le panier jusqu'& ce qu'il soit en position haute et

d'aplomb.

Pour abaisser le

panier, appuyer sur les

deux regleurs du

panier et glisser &

nouveau le panier &sa

position la plus basse.

REMARQUE : Le

panier superieur doit

_tre d'aplomb.

t¸ _

Panier amovible sup_rieur

Les paniers amovibles permettent

de laver des articles de plus

grande taille tels que marmites,

r6tissoires et t61es & biscuits dans

le panier de niveau inferieur.

IMPORTANT : 0ter la vaisselle B

avant de retirer le panier de niveau

intermediaire du lave-vaisselle.

A.Butte d'arr#t

Pour enlever le panier: B.Glissiere

1. Pour acceder aux butees

d'arr_t, tirer le panier vers

I'avant jusqu'& I'arr_t et jusqu'& ce qu'il s'enclenche en place.

2. Pour ouvrir les butees d'arr_t, relever la butee d'arr_t vers

I'exterieur de la glissiere.

3. Apr_s ouverture des deux butees d'arr_t, faire glisser les roues

avant vers le haut pour les sortir de la fente dans la glissiere.

Continuer &tirer le panier vers I'avant et faire glisser les roues

arriere vers le haut pour les sortir de la glissiere.

4. Fermer les butees d'arr_t.

5. Faire glisser les butees de panier pour les reinstaller dans le

lave-vaisselle.

Pour r_installer le panier

1. Tirer doucement les butees du panier vers I'avant dans le lave-

vaisselle jusqu'& I'arr_t et jusqu'& ce qu'elles s'enclenchent en

place.

2. Pour ouvrir les butees d'arr_t, relever la butee d'arr_t vers

I'exterieur de la glissiere.

3. Placer les roulettes arriere du panier de chaque c6te du panier

dans la fente de la glissiere et faire rouler le panier pour le

reinstaller dans les glissieres.

4. Inserer les roulettes avant du panier de chaque c6te du panier

dans les fentes du panier.

5. Fermer les butees d'arr_t des deux c6tes du panier et faire

glisser le panier pour le reinstaller dans le lave-vaisselle.

Attaches pour articles I_gers

Les attaches maintiennent les articles legers en

plastique tels que les tasses, couvercles ou bols en

place pendant le lavage.

Pour d_placer une attache :

1. Tirer I'attache vers le haut pour la separer de la

tige.

2. Reinstaller I'attache sur une autre tige.

Tiges flexibles

La rangee de tiges sur les c6tes &

gauche et &droite du panier \

superieur peut _tre reglee pour faire

de la place pour divers articles de

vaisselle.

Pour ajuster les tiges rabattables :

1. Saisir la pointe de la tige qui se trouve dans le support de la

tige.

2. Pousser doucement la tige &I'exterieur du support de la tige.

3. Rabattre les tiges vers le bas et vers le centre du panier.

Celave-vaissellecomportelatechnologielaplusrecenteenmatieredefiltration.Lesysteme&triplefiltrationminimiselebruitetoptimise

laconservationd'eauetd'energie,toutenfournissantuneperformancedenettoyagesuperieure.Duranttoutelaviedulave-vaissellele

filtrenecessiteraI'entretienappropriepourlemaintiendelaperformancedenettoyageoptimale.

Lesysteme&triplefiltrationcomprenddeuxparties•lefiltre

superieuretlefiltreinferieur.

• Lefiltresuperieurretientlesel6mentsetobjetsetrangers

degrandetailleainsiquelesparticulesalimentairestr_s

fines,etlesempeched'atteindrelapompe.

• Lefiltreinferieurempechelesalimentsd'etreredeposes

surlavaisselle.

IIpeutetrenecessairedenettoyerlesfiltresacertaines

occasions:

• Presenced'objetsousouilluresdanslefiltresuperieur.

• Degradationdelaperformancedelavage(presencede

souilluressurlavaisselle).

• Perceptionderugositeautouchersurlessurfacesdela

vaisselle.

IIesttresfacilederetireretd'entretenirlesfiltres.Letableau

ci-dessousindiquelafrequencedenettoyagerecommandee

pourlesfiltres.

Pattes de

positionnement

Ensen,b e

de filtre ...........

superieur

Fittre inf6rieur

INTERVALLES DE NETTOYA(_ E RECOMMANDES POUR LES FILTRES

Nombre Vaisselle lav_e avant le

d'utilisations par chargement

semaine

1,3 Une fois par an

4-7 Une fois par an

8,12 Une fois par an

13-14 Une fois par an

Vaisselle racine et Vaisselle seulement racl6e Vaisselle ni racl6e ni rinc_e

rinc_e avant le avant le chargement* avant le chargement

chargement

Une fois par an Deux fois par an Tousles deux mois

Une fois par an Deux fois par an Une fois par mois

Ueux fois par an Tous les trois mois Toutes les deux semaines

Deux fois par an Tousles trois mois Une fois par semaine

*Recommandation du fabricant • Cette pratique eliminera la consommation d'eau et d'energie associee a la preparation de la vaisselle et

vous epargnera du temps et des efforts.

Eau tr_s dure Nettoyage

Si I'eau distribuee dans la region est tr_s dure (concentration de

calcaire superieure & 15 grains), nettoyer le filtre au moins une fois

par mois. La formation d'un residu blanc sur les surfaces du lave-

vaisselle indique la durete de I'eau. On trouve a lasection

"Depannage" des conseils sur I'elimination des taches.

Instructions de d_pose du filtre

1. Faire tourner le filtre

superieur de 1¼tour dans le

sens antihoraire; soulever

le filtre et le degager.

2. Saisir le filtre inferieur dans

I'ouverture circulaire,

soulever legerement et tirer

vers I'avant pour le

degager.

3. Nettoyer les filtres - voir la

description du processus

ci-dessous.

Patte de

IMPORTANT : Ne pas utiliser de brosse metallique ni de tampon &

recurer, etc., susceptible d'endommager les filtres.

Rincer chaque filtre sous le jet d'eau du robinet, pour eliminer la

plupart des souillures. S'il reste des souillures difficiles &enlever ou

des dep6ts de calcium imputables & la durete de I'eau, il peut etre

necessaire d'employer un pinceau souple.

D_pose du filtre sup_rieur

La page charge ...

Jenn-Air JDB3600AWS3 Le manuel du propriétaire

Marque: Jenn-Air

Modèle: JDB3600AWS3

Catégorie: Lave-vaisselle

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Jenn-Air JDB3600AWS3 Owner's manual

Jenn-Air JDB3600AWS3 Le manuel du propriétaire

Jenn-Air JDB3600AWS3 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents