INNOCN 27C1U-D Guide d'installation

Taper
Guide d'installation
27C1U-D
English
Contents
Precautions
Package Content
Installation
Adjustment of monitor
Instructions for use
OSD menu
Specification
Common troubleshooting
Warranty Information
Contact us
1
2
3
5
10
7
11
12
12
5
English
1
Precautions
Keep the monitor away from water sources or damp places, such as bath rooms, kitchens,
basements and swimming pools.
Make sure the monitor is placed on a flat surface. If the monitor falls down, it may cause human
injury or device damage.
Store and use the monitor in a cool, dry and well ventilated place, and keep it away from emission
and heat sources.
Do not cover or block the vent hole in the rear casing, and do not use the product on a bed,sofa,
blanket or similar objects.
The range of the supply voltage of the monitor is printed on the label on the rear casing.If it is
impossible to determine the supply voltage, please consult the distributor or local power
company.
If the monitor will not be used for a long period, please cut off the power supply to avoid electric
shock in rainy days and damage due to abnormal supply voltage.
Please use a reliable grounded socket,Do not overload the socket, or it may cause fire or electric
shock.
Do not put foreign matters into the monitor, or it may cause short circuits resulting fire or electric
shock.
Do not disassemble or repair this product by self to avoid electric shock. If faults occur, please
contact the after-sales service directly.
Do not pull or twist the power cable forcedly.
There is a polarizer layer (not a protective film) on the surface of the screen. Do not peel it off, or
the product may be damaged and the warranty will be invalid.
English
2
2
Package Content
Packing list
Please check that the package of the monitor contains all parts. If any part is lost, please contact
the distributor.
The color and shape of parts may vary with models. Figures in this User Manual are for reference only.
Cables supplied may vary with purchased products. Figures in this User Manual are for reference only.
Display screen Stand Base
HDMI Cable
QSG
27C1U-D
Quick Installation Guide
使用产品前请仔细阅读本说明书,并妥善保管
Before using this product, please read this User Manual carefully and keep it well
本製品をご使用になる前に、本ユーザーマニュアルをよくお読みになり、大切に保管してください
Veuillez, avant d'utiliser ce produit, lire attentivement ce manuel et le conserver en lieu sûr
Lesen Sie vor Verwendung dieses Produkts sorgfältig die Bedienungsanleitung und bewahren Sie sie gut auf
Warranty Card
Need Help? We are here!
Contact Us
service@innocn. com
Home Page
www.innocn.com
We are fully dedicated to your 100 % satisfactio n.
Please do not return this produc t back to the store direc tly. We are always
here to help! Innocn provides 1 Year Warranty.If you have any questions using
the product, please contact our surppor t team.We will resolve your prob lem
over online chat or email, pr ovice replacement product or warranty repair.
Power Cable Type-C Cable
English
3
Installation
Installation of base
Note: During standing of the monitor, do not take out the monitor from foams, and do not pinch
the liquid crystal screen with hand to avoid damage to the screen.
English
4
English
5
Instructions for use
Cable connection
* The bottom interface configuration at the back of the monitor varies with products.
* Note: If the power cable or signal cable is damaged, you must replace it with special soft cables or
special components purchased from the manufacture or maintenance department.
OR
AUDIO OUT
Connect audio outputting
devices such as earphones
to the AUDIO OUT port.
DP interface
Use the DP cable to
connect the DP IN port of
the product to the DP
OUT port of a PC.
HDMI interface
Use the HDMI-DVI cable
(not included) to connect
the HDMI IN port of the
product to the DVI OUT
port of a PC.
Use the HDMI cable to
connect the HDMI IN port
of the product to the
HDMI OUT port of a PC
Adjustment of monitor
Please connect the power cable
plug to the corresponding port
of the monitor, and connect the
other end to a properly
grounded power outlet.
AC IN interface
Type-C interface
A Type-C line can be used
to connect to data ports of
machines and external
terminals.
English
6
Instructions for use
Description of buttons
Explanation of indicator light
1 2 3 4 5
6
6. Indicator light: If the white light is normally on, it is indicated that the device is powered on, and
that the monitor is running normally. red light indicates no video signal detected or low voltage.
Please make sure that your computer is turned on and all video cables are fully plugged in and/or
connected.
Menu button: Press to enter sub-menus/ quickly enter the main menu
Down button: Press to move down in the menu/quickly adjust the brightness
Up button: Press to move up in the menu/quickly adjust the volume
Exit/hot key: Press to return to the previous menu/quickly switch input signals of the port
Power button: Press to turn on/off the monitor
Button Function
1
2
3
4
5
English
7
1 2 3 4 5
OSD menu
Enter the main menu
Adjust the brightness
Adjust the volume
Switch port input signal
Power ON/OFF
1
2
3
4
5
Menu description
The color and shape of the OSD menu of the actual computer may be slightly different from them
shown in the figure.
Specifications of the OSD menu may change with improvements of functions without prior notice.
The screen display (OSD) menu can be used to adjust settings of the monitor and is shown on the
screen after the monitor is powered on and the button is pressed.
1. Press one of the buttons ( ) to activate the browser screen.
When booting for the first time, you need to set the default language of the monitor menu.
Press buttons ( ) to select the language to be set, and press the OK button( ) to confirm.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) this device must accept any interference received, including interference that may cause undesired
operation.
CAN ICES-3 (B)/NMB-3(B)
English
10
LCD Monitor
27B2U-C
27C1U-D
27
inch
(69cm)
16:9
178°(H)/178°(V)
155.4 (H) × 155.4(V)um
1000:1(TYP)
1.07B
3840 x 2160
60Hz
100-240V~ 50/60Hz, 2.0A
The standard voltage and power supply may vary with countries,
please refer to the label at the back of the product.
613.3x57.2x367.3mm
approx.
3.71kg
613.3x194.3x543.4mm
approx.
5.68kg
Forward tilting
-5°/
Backward tilting
+20°
120mm
-45°/+45°
-90°/+90°
Temperature
:0℃~40℃(32℉~104℉
Humidity
:10%~90% RH(
non-condensing
Temperature
:-20℃~60℃(-4℉~140℉
Humidity
:5%~95% RH(
non-condensing
Without base
With base
Action
Storage
Product Name
Product Model
Product Code
Screen Size
Aspect Ratio
Viewing Angle
Pixel pitch
Contrast ratio
Color
Resolution
Refresh Rate
Power Input
Product
Dimentions
(with Height range)
Tilting angle
Height range
Rotation angle
Vertical angle
Environmental
conditions
English
Common troubleshooting
Common Symptoms Possible Solutions
The following table contains general information about common monitor problems you might encounter
and the possible solutions.
• Ensure that the video cable connecting the monitor and the computer is properly connected
and secure.
• Make sure if the operating system had entered hibernation, sleep or power-save mode. Press
any key (Enter key / Power key) or move the mouse to wake it up.
• Check for bent or broken pins in the video cable connector.
• Ensure that the correct input source is selected in the Input Source menu.
• Replace other identical signal cable (HDMI / DisplayPort) to take cross-test.
No display after turning monitor
ON (screen is black but power s
upply lights is ON)
• Verify that the power outlet is functioning properly using any other electrical equipment.
• Make sure the power button on the front panel is normal for boot and pressed fully.
• Check for bent or broken pins in the video cable connector.
No display after turning monitor
ON (not boot, black screen & no
power lights)
• Eliminate video extension cables.
• Reset the monitor to factory settings.
• Change the video resolution to the correct resolution and aspect ratio.
• If the words are still blurry, please try enabling or disabling CLEAR TYPE function from windows
Poor Focus. Picture is fuzzy,
blurry, or ghosting
• Cycle power On-Off.
• Pixel that is permanently Off is a natural defect that can occur in LCD technology.
• For more information on Dell Monitor Quality and Pixel Policy, see INNOCN Support site
at: http://www.innocn.com
Missing Pixels. LCD screen has
spots
• Do not perform any troubleshooting steps.
• Contact INNOCN immediately.
Safety Related Issues
(Visible signs of smoke or sparks)
• Check the resolution setting in your PC
• Reset the monitor to factory settings.
• Make sure the device was not set to “Care Eyes mode”
• Check here: OSDPicture SettingContextual modeCare Eyes mode
• Press only one key at a time.
• Restart the computer
• Make sure to have a valid video signal going through the monitor before
you can turn on the OSD
• Make sure the “contextual mode”is OFF before setting brightness and contrast ratio.
• Check here: OSDPicture SettingContextual modeoff
The screen appears yellow
Control panel keys do not work
I cannot adjust the brightness/
contrast ratio through OSD
• Make sure your video card supports that feature.
• Also make sure you are using DisplayPort to connect from your computer to your monitor.
• Not every computer/phone ‘s USB Type-C port will support video out signals. Please check
your cable and your computer/phone to make sure those will support a video signal.our monitor.
• Check to see if you plugged a USB-B uplink cable(included in the package) from your computer
to the monitor’s USB-B port. Without an uplink cable to the computer, the USB ports on the back
of the monitor will not work.
• Check that your monitor is turned On.
• Reconnect the uplink cable to your computer.
• Reconnect the USB peripherals(downstream connector).
• Switch Off and then turn On the monitor again.
• Reboot the computer.
• Some USB devices like external portable HDD require higher electric current; connect the device
directly to the computer system.
I cannot get higher refresh rate
on my monitor
After plugged in USB Type-C
from computer to monitor,
there is no video
USB interface is not working
• Check the Aspect Ratio setting in the Display menu OSD.Image is centered on screen, but
does not fill entire viewing area
11
Warranty Information
1. What is covered in your warranty?
2. Contact us
3. This Warranty is not applicable:
1.The product is not purchased from an Authorized Innocn dealer.
2.The product is not used according to instructions given in the instruction manual.
3.Defects caused by improper use as determined by company personnel.
4.Modification or alteration of any nature is made in the electrical circuitry / or physical construction of
the set.
5.Installation / repair work is carried out by persons / agency other than authorized by the company.
6.The original serial number is removed, obliterated or altered from the machine or cabinet.
7.Accidents, Acts of God, lightning, water, fire, public disturbances, improper ventilation, voltage
fluctuations or any cause beyond the control of Innocn.
Item
Monitor
Warranty term
1 Year
Service Email
Service Website
http://www.innocn.com
Contact us
Thank you for choosing Innocn® !
We hope the Innocn® product you purchased will serve you well. To ensure safety and trouble-free
operation of your device, please read the user guide carefully and keep it for future needs.
Please email us for customer service & technical support at [email protected].
We recommend you go online to our homepage for the most up-to-date guidance for your product.
registering Innocn membership; refering to warranty information.
http://www.innocn.com
12
English
简体中文
1
2
3
目 录
注意事项
产品介绍
安装
调整显示
使用
OSD菜单
基本参数
常见故障排查
保修说明
联系我们
5
10
7
11
12
12
5
简体中文
注意事项
请勿靠近水源或潮湿的地方,如浴室、厨房、地下室、游泳池等。
确保设备安装放置在平稳处,若掉落,可能产生人身伤害或设备损坏。
在阴凉、干燥、通风处存放、使用,请勿靠近辐射源和热源。
请勿覆盖、堵塞后壳上的通风孔,请勿置于床、沙发、毛毯或类似物体表面使用。
设备操作的电源电压范围标示于后壳标签上。若不能确认所供应的电压,可洽询经销商或当地的电力公司。
当设备长期不使用,请切断电源,防止在雷雨天受到电击以及异常电源电压的损伤。
请使用可靠接地插座,勿让插座过载,否则会引起火灾或电击。
请勿把异物放入机内,否则可能会引起短路而导致火灾或电击。
请勿自行拆卸,维修本产品,以免发生电击危险,若有故障,请直接与售后服务人员联系。
请勿过度拉扯、扭曲电源线。
屏幕表面附有一层偏光片(非保护膜),请勿撕除,否则会损坏产品且无法保修。
1
简体中文
包装清单
请检查所有物品是否包含在您的显示器包装中,如有丢失配件,请联系您的经销商。
显示器主机 支架 底座
HDMI信号线
配件的颜色和形状可能随型号的不同而有所变化,具体以您收到的实物为准。
根据所购产品的不同,提供的线材可能会有所不同,具体以收到的实际线材为准。
产品介绍
Type-C信号线
简易说明书 校色报告
电源线
2
2
27C1U-D
Quick Installation Guide
使用产品前请仔细阅读本说明书,并妥善保管
Before using this product, please read this User Manual carefully and keep it well
本製品をご使用になる前に、本ユーザーマニュアルをよくお読みになり、大切に保管してください
Veuillez, avant d'utiliser ce produit, lire attentivement ce manuel et le conserver en lieu sûr
Lesen Sie vor Verwendung dieses Produkts sorgfältig die Bedienungsanleitung und bewahren Sie sie gut auf
简体中文
底座安装
安 装
底座安装
安 装
3
简体中文
4
简体中文
5
线缆连接:
* 显示器背面的底部接口配置根据产品不同而异。
* 注意:如果电源线或信号线损坏,必须用专用软线或从其制造商或维修部买到的专用组件来更换。
使用HDMI信号线,将产品的
HDMI IN接口连接到PC的
HDMI OUT 接口。
使用HDMI-DVI信号线,将产
品的HDMI IN接口连接到PC的
DVI OUT接口。
HDMI接口
将耳机等音频输出设备
连接到AUDIO OUT接口。
AUDIO OUT
OR
将耳机等音频输出设备
连接到AUDIO OUT接口。
AUDIO OUT
OR
使用DP信号线,将产品
的DP IN接口连接到PC
的DP OUT 接口。
DP接口
使用DP信号线,将产品
的DP IN接口连接到PC
的DP OUT 接口。
DP接口
使 用
调整显示
请将电源线连接显示器对应
电源接口上,将另一端连接到
正确接地的电源插座。
AC IN接口
使用Type-C线可以连接
到机器数据端口和外部
终端设备。
Type-C接口
使用Type-C线可以连接
到机器数据端口和外部
终端设备。
Type-C接口
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67

INNOCN 27C1U-D Guide d'installation

Taper
Guide d'installation