1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
PRODUCT DATA STUFFER NUMBER
TITLE
INSTRUCTION SHEET, CORD REEL
DR. BY
D.LI
CHK. BY
SCALE
1:1
DATE
8/28/2018
PROJECT NO.
NPD-01938
PDS-2847
SIZE SHEET
1
OF
1
D
WIRING DEVICE-KELLEMS
HUBBELL INCORPORATED
SHELTON, CT
PDS-2847
PRODUCT DATA STUFFER NUMBER
OF
SHEET1
1
2847
PRODUCT DATA CONTROL NUMBER
THE NUMBER ABOVE IDENTIFIES THE DATA
PRINTED ON THE STUFFER SHOWN ON THIS DRAWING.
AS AN ALTERNATE, THIS DATA CAN BE PRINTED
ON THE SINGLE UNIT PACKAGING OF A PRODUCT.
PRINTING MUST BE NO SMALLER THAN 1/16" AND
DETAILS OF ANY GRAPHICS MUST NOT BE LOST.
IF THE PRODUCT IS PACKED IN A MULTI-PACK,
A STUFFER MUST BE USED AND THE FOLLOWING MUST
BE DONE:
1 INSERT IN THE MULTI-PACK AS MANY STUFFERS
AS THERE ARE DEVICES IN THE MULTI-PACK.
2 PRINT THE FOLLOWING LEGEND, IN LETTERS NO
SMALLER THAN 3/16", IN A PROMINENT PLACE ON
THE OUTSIDE OF THE MULTI-PACK: "SELLER: SUPPLY
ENCLOSED INSTRUCTIONS WITH EACH DEVICE SOLD"
THE PRODUCT DATA CONTROL NUMBER ABOVE
MUST BE PART OF THE PRINTED DATA.
PD-
SUB. REVISIONS
19/7/18 NEW RELEASE PER DCN #24214. D.LI
2
12/12/18 UPDATE ARTWORK WITH
MOUNTING FASTENERS ADDED TO THE
MOUNTING BRACKETS PER DCN #24347.
D.LI
3
10/18/2019 MAX. INSTALLED HEIGHT 25
WAS 16 FT. IN THE ARTWORK PER DCN
#191024140402. D.LI
FRONT BACK
NOTE:
1. TO BE PRINTED DOUBLE SIDES OF ONE SHEET.
17.00
11.00
3. En ce qui concerne la série ACA, passer à l’étape 4. Quant à la série WCA, monter le cordon
3. Para la serie ACA, vaya al paso 4. Para la serie WCA, instalación del cable de entrada de