Black & Decker BDROUT127 Manuel utilisateur

Catégorie
Outils électroportatifs
Taper
Manuel utilisateur
BDROUT127
www.blackanddecker.ae
ENFRAR
ENGLISH
2
(Original instructions)
8 mm 12 mm 12.7 mm
3
ENGLISH
(Original instructions)
3
2
3
4
5
22
6
22
7
8
9
10
11
13
14
12
21
20
19
15
16
17
18
4
ENGLISH
(Original instructions)
8 mm
12 mm
2
1
3
4
3
2
2
3
1
2
1
3
4
4
2
1
ENGLISH
5
(Original instructions)
ENGLISH
3
4
2
1
2
5
2
1
1
4
6
ENGLISH
(Original instructions)
1 MAX
2
1
6
2
4
3
3
7
7
ENGLISH
(Original instructions)
87
2
1
1
1
2
2
1
3
2
1
1
2
2
3
4
ENGLISH
8
(Original instructions)
1
2
3 mm
3 mm
2
3
5
4
1
3
3
2
2
1
5
6
7
9
ENGLISH
(Original instructions)
1
2
2
1
1
2
2
3
5
1
4
22
1
3
3
4
10
ENGLISH
(Original instructions)
3
2
1
1
1
2
2
1
1
2
22
1
3
44
11
(Original instructions)
ENGLISH
2
1
1
2
3
55
6
7
8
12
ENGLISH
(Original instructions)
1
2
3
1
2
1
4
3
2
1
3
4
2
3
5
1
4
22
1
4
3
3
13
(Original instructions)
ENGLISH
1
3
2
1
2
3
22
1
4
3
3
ENGLISH
14
(Original instructions)
1 2 3 4 5
6 7 8 9 10
*
Router bit types, for reference only
15
ENGLISH
(Original instructions)
Intended use
Your BLACK+DECKER™ plunge router has
been designed for routing wood and wood
products. This tool is intended for consumer
use only.
Safety instructions
General power tool safety warnings
Read all safety warnings,
instructions, illustrations and
specifications provided with this
power tool. Failure to follow all instructions
listed below may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose
control.
2. Electrical safety
a. Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce
risk of electric shock.
b. Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
c. Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric
shock.
d. Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
e. When operating a power tool outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric
shock.
f. If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.
3. Personal safety
a. Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool
while you are tired or under the
inuence of drugs, alcohol or
medication. A moment of inattention
while operating power tools may result in
serious personal injury.
b. Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing
protection used for appropriate
conditions will reduce personal injuries.
c. Prevent unintentional starting. Ensure
the switch is in the o-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your
finger on the switch or energising power
tools that have the switch on invites
accidents.
d. Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a
rotating part of the power tool may result
in personal injury.
e. Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in
unexpected situations.
16
ENGLISH
(Original instructions)
f. Dress properly. Do not wear loose
clothing or jewellery. Keep your hair and
clothing away from moving parts.
Loose clothes, jewellery or long hair can
be caught in moving parts.
g. If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of
dust collection can reduce dust-related
hazards.
h. Do not let familiarity gained from
frequent use of tools allow you to
become complacent and ignore tool
safety principles. A careless action can
cause severe injury within a fraction of a
second.
4. Power tool use and care
a. Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it
was designed.
b. Do not use the power tool if the switch
does not turn it on and o. Any power
tool that cannot be controlled with the
switch is dangerous and must be
repaired.
c. Disconnect the plug from the power
source and/or remove the battery pack,
if detachable, from the power tool
before making any adjustments,
changing accessories, or storing power
tools. Such preventive safety measures
reduce the risk of starting the power tool
accidentally.
d. Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands
of untrained users.
e. Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and any
other condition that may aect the
power tool’s operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g. Use the power tool, accessories and tool
bits etc., in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations dierent from those intended
could result in a hazardous situation.
h. Keep handles and grasping surfaces dry,
clean and free from oil and grease.
Slippery handles and grasping surfaces
do not allow for safe handling and control
of the tool in unexpected situations.
5. Service
a. Have your power tool serviced by a
qualied repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
Additional power tool safety
warnings
Warning! Additional safety warnings
for routers
Hold the power tool by the insulated
gripping surfaces only, because the
cutter may contact its own cord. Cutting
a "live" wire may make exposed metal
parts of the power tool "live" and could
give the operator an electric shock.
Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the work by
hand or against the body leaves it
unstable and may lead to loss of control.
Warning! Contact with, or inhalation of dusts
arising from routing applications may
endanger the health of the operator and
possible bystanders. Wear a dust mask
specifically designed for protection against
dust and fumes and ensure that persons
within or entering the work area are also
protected.
Thoroughly remove all dust after routing.
Only use router bits with a shank
diameter equal to the size of the collet
installed in the tool.
Only use router bits suitable for the
no-load speed of the tool.
Never use router bits with a diameter
exceeding the maximum diameter
specified in the technical data section.
Do not use the tool in an inverted
position.
Refer to Fig 1-2 on page 4 for changing
the collet.
Do not attempt to use the tool in a
stationary mode.
If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid hazard.
Take special care when routing where the
paint is possibly lead based or when
routing some woods which may produce
toxic dust:
- Do not let children or pregnant women
enter the work area.
- Do not eat, drink or smoke in the work
area.
- Dispose of dust particles and any other
debris safely.
The intended use is described in this
instruction manual. The use of any
accessory or attachment or performance
of any operation with this tool other than
those recommended in this instruction
manual may present a risk of personal
injury and/or damage to property.
Safety of others
This appliance/tool is not intended for
use by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use
of the appliance by a person responsible
for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
Residual risks
Additional residual risks may arise when
using the tool which may not be included in
the enclosed safety warnings. These risks
can arise from misuse, prolonged use etc.
Even with the application of the relevant
safety regulations and the implementation
of safety devices, certain residual risks can
not be avoided. These include:
Injuries caused by touching any
rotating/moving parts.
Injuries caused when changing any parts,
blades or accessories.
Injuries caused by prolonged use of a
tool. When using any tool for prolonged
periods ensure you take regular breaks.
Impairment of hearing.
Health hazards caused by breathing dust
developed when using your tool
(example:- working with wood, especially
oak, beech and MDF.)
Labels on tool
The label on your tool may include the
following symbols along with the date code:
Position of Date Code
The Date Code, which also includes the year
of manufacture, is printed into the housing.
Example:
2017 XX JN
Year of manufacturing
Electrical safety
This tool is double insulated;
therefore no earth wire is required.
Always check that the power supply
corresponds to the voltage on the
rating plate.
If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
17
ENGLISH
(Original instructions)
Hz ....... Hertz
W ....... Watts
min ..... minutes
..... Alternating
Current
..... Direct
Current
Read
Instructions
Manual
Use Eye
Protection
Use Ear
Protection
...... Class II
Construction
...... Earthing
Terminal
...... Safety
Alert Symbol
.../min.. Revolutions
or Recipro-
cation per
minute
V ........ Volts
A ........ Amperes n
0
....... No-Load
Speed
Features
1. Brush cap
2. Ruler knob
3. Knob
4. Speed regulator
5. Fine height adjuster rod
6. Stop bar lock knob
7. Spindle lock
8. Dynamic adjuster
9. Depth gauge
10. Bit
11. Parallel guide lock knob
12. Lock on button
13. Trigger
14. Plunge lock knob
15. Template guide
16. Dust port adapter
17. Collet
18. Centring pin
19. Copy follower
20. Guide rack
21. Guiding rod
22. Handle, insulated gripping surface
Router bits (Optional)
Maintenance
Warning! The product should never
be connected to a power supply
when assembling parts, making
adjustments, cleaning, performing
maintenance, or when the product s not in
use. Disconnecting the product from the
power supply will prevent accidental starting
that could cause serious injury.
Warning! When servicing, use only
original manufacturer’s replacement
parts. Use of any other parts may
create a hazard or cause product
damage.
Avoid using solvents when cleaning
plastic parts. Most plastics are susceptible
to various types of commercial solvents
and may be damaged by their use. Use
clean cloths to remove dirt, carbon dust,
etc.
Warning! Do not, at any time, let
brake uids, gasoline,
pet ro leu mba s ed produ cts ,
penetrating oils, etc., come in contact with
plastic parts. They contain chemicals that
can damage, weaken, or destroy plastic.
Electrical tools used on berglass
material, wallboard, spackling
compounds, or plaster are subject to
accelerated wear and possible premature
failure because the fiberglass chips and
grindings are highly abrasive to bearings,
brushes, commutators, etc. We extended
work on these types of materials.
Warning! Always wear safety
goggles or safety glasses with side
shields during power tool operation.
If operation is dusty, also wear a dust
mask.
If the power supply cord is damaged, it
must be replaced only by the
manufacturer or by an authorised service
centre to avoid risk. Contact authorised
service centre.
For greater safety and reliability, all
repairs should be performed by an
authorised RYOBI service centre.
18
ENGLISH
(Original instructions)
Description Application
Straight bit (1)
Trimming bit (2)
Rebating bit (3)
V-grooving bit (4)
Core box bit (5)
Core bit (6)
Ogee moulding bit (7)
Rounding over bit (8)
Dovetail bit (9)
Chamfer bit (10)
Grooves and rebates
Trimming laminates or
hardwood; accurate
profiling using a template
Rebates on straight or
curved workpieces
Grooves, engraving and
decorative edge moulding
Fluting, engraving and
decorative edge moulding
Decorative edge moulding
Decorative edge moulding
Rounding over edges
Dovetail joints
Chamfer edges
Lubrication
All of the bearings in the product are
lubricated with a su cient amount of
high-grade lubricant for the life span of the
product under normal operating conditions.
Therefore, no further lubrication is required.
Environmental Protection
Recycle raw materials instead of disposing
of as waste. The machine, accessories and
packaging should be sorted for
environmentfriendly recycling.
Input voltage V
AC
220-240
Frequency Hz 50/60
Power input W 1,600
No-load speed min
-1
6,000 - 22,000
Collet size 8/12/12.7 mm
Max. diameter of
router bit mm 12.7
Max. depth of cut mm 50 mm
Weight kg 11 kg
Technical data
BDROUT127
Protecting the environment
Separate collection. This product
must not be disposed of with normal
household waste.
Should you find one day that your
BLACK+DECKER product needs
replacement, or if it is of no further use to
you, do not dispose of it with household
waste. Make this product available for
separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Reuse of
recycled materials helps prevent
environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by
the retailer when you purchase a new
product.
BLACK+DECKER provides a facility for the
collection and recycling of BLACK+DECKER
products once they have reached the end of
their working life. To take advantage of this
service please return your product to any
authorised repair agent who will collect
them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your
local BLACK+DECKER oce at the address
indicated in this manual. Alternatively, a list
of authorised BLACK+DECKER repair
agents and full details of our after-sales
service and contacts are available on the
Internet at: www.2helpU.com.
19
ENGLISH
(Original instructions)
ENGLISH
20
(Original instructions)
Guarantee
BLACK+DECKER is confident of the quality
of its products and oers an outstanding
guarantee. This guarantee statement is in
addition to and in no way prejudices your
statutory rights.
If a BLACK+DECKER product becomes
defective due to faulty materials,
workmanship or lack of conformity, within
24 months from the date of purchase,
BLACK+DECKER guarantees to replace
defective parts, repair products subjected to
fair wear and tear or replace such products
to make sure of the minimum inconvenience
to the customer unless:
The product has been used for trade,
professional or hire purposes.
The product has been subjected to
misuse or neglect.
The product has sustained damage
through foreign objects, substances or
accidents.
Repairs have been attempted by persons
other than authorised repair agents or
BLACK+DECKER service sta.
To claim on the guarantee, you will need to
submit proof of purchase to the seller or an
authorised repair agent. You can check the
location of your nearest authorised repair
agent by contacting your local
BLACK+DECKER oce at the address
indicated in this manual. Alternatively, a list
of authorised BLACK+DECKER repair agents
and full details of our aftersales service and
contacts are available on the Internet at:
www.2helpU.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Black & Decker BDROUT127 Manuel utilisateur

Catégorie
Outils électroportatifs
Taper
Manuel utilisateur

dans d''autres langues