AVENTICS Trunnion-Mountings Assembly Instructions

AVENTICS
Marque
AVENTICS
Modèle
Trunnion-Mountings
Taper
Assembly Instructions
AVENTICS GmbH
Ulmer Straße 4
30880 Laatzen, GERMANY
Phone +49 (0) 5 11-21 36-0
Fax: +49 (0) 511-21 36-2 69
www.aventics.com
info@aventics.com
Further addresses:
www.aventics.com/contact
The data specified above only serve to
describe the product. No statements
concerning a certain condition or suitability
for a certain application can be derived from
our information. The given information does
not release the user from the obligation of
own judgement and verification. It must be
remembered that our products are subject
to a natural process of wear and aging.
An example configuration is depicted on the
title page. The delivered product may thus
vary from that in the illustration.
Translation of the original operating
instructions. The original operating
instructions were created in the German
language.
R412021953–BAL–001–AC/09.2016
Subject to modifications. © All rights
reserved by AVENTICS GmbH, even and
especially in cases of proprietary rights
applications. It may not be reproduced or
given to third parties without its consent.
Montageanleitung | Assembly instructions | Instructions de montage
Istruzioni di montaggio | Instrucciones de montaje | Monteringsanvisning
Mittenschwenkzapfenbefestigung
Center trunnion mounting
Fixation à tourillon centrale
Fissaggio a perno oscillante centrale
Fijación de pivote oscilante central
Svängfäste mitten
MT4
R412021953/09.2016
Replaces: 05.2014, DE/EN/FR/IT/ES/SV
1AVENTIC
S | MT4 | R412021953–BAL–001–AC
2
1
2x 8x
Ø [mm]
(1) (2)
SW
MD
[Nm]
SW
MD
[Nm]
32–40 4 4.5–5 2.5 2.7–3
50 5 8.1–9 3 4.5–5
63–80 5 8.1–9 4 9–10
100–125 5 8.1–9 5 18–20
Ø Zylinder/cylinder/vérin/
cilindro/cilindro/cylinder
SW Schlüsselgröße/wrench size/
taille de la clé/Misura della chiave/
tamaño de llave/nyckelstorlek
MD Drehmoment/torque/couple/
coppia/par de apriete/vridmoment
90°
1
2x
1
1
2
3
8x
2
2
2
2
4
  • Page 1 1

AVENTICS Trunnion-Mountings Assembly Instructions

AVENTICS
Marque
AVENTICS
Modèle
Trunnion-Mountings
Taper
Assembly Instructions
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes