Tektronix TDS2MEM Manuel utilisateur

This document set supports English, Français, Deutsch,

Italiano, Español, Português, 한국어 , ᣣᧄ⺆ ,

ㅔԧЁ᭛ , ᜗᧯խ֮ , and Русский

This document supports firmware version FV:v6.00

and above.

www.tektronix.com

User Manual

TDS2MEM

Storage Memory and

Communications Module

071-1262-00

Tektronix products are covered by U.S and foreigh patents, issued and

pending. Information in this publication supercedes that in all previously

published material. Specifications and price change privileges reserved.

Tektronix, Inc., P.O. Box 500, Beaverton, OR 97223

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

CompactFlash is a registered trademark of the CompactFlash Association.

WARRANTY SUMMARY

TDS2MEM

Tektronix warrants that the products that it manufactures and sells will be free from

defects in materials and workmanship for a period of three (3) years from the date of

shipment from an authorized Tektronix distributor. If a product or CRT proves defective

within the respective period, Tektronix will provide repair or replacement as described in

the complete warranty statement.

To arrange for service or obtain a copy of the complete warranty statement, please con-

tact your nearest Tektronix sales and service office.

EXCEPT AS PROVIDED IN THIS SUMMARY OR THE APPLICABLE WARRANTY

STATEMENT, TEKTRONIX MAKES NO WARRANTY OF ANY KIND, EXPRESS

OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRAN-

TIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT SHALL TEKTRONIX BE LIABLE FOR INDIRECT, SPECIAL OR

CONSEQUENTIAL DAMAGES.

WARRANTY

CompactFlash Card and CompactFlash Reader

Tektronix warrants that the parts, assemblies and supplies ("products") that it manufac-

tures and sells will be free from defects in materials and workmanship for a period of

three (3) months from the date of shipment. If a product proves defective during this war-

ranty period, Tektronix, at its option, either will repair the defective product without

charge for parts and labor, or will provide a replacement in exchange for the defective

product.

In order to obtain service under this warranty, Customer must notify Tektronix of the

defect before the expiration of the warranty period and make suitable arrangements for

the performance of service. Customer shall be responsible for packaging and shipping

the defective product to the service center designated by Tektronix, with shipping

charges prepaid. Tektronix shall pay for the return of the product to Customer if the ship-

ment is to a location within the country in which the Tektronix service center is located.

Customer shall be responsible for paying all shipping charges, duties, taxes, and any

other charges for products returned to any other locations.

This warranty shall not apply to any defect, failure or damage caused by improper use or

improper or inadequate maintenance and care. Tektronix shall not be obligated to furnish

service under this warranty a) to repair damage resulting from attempts by personnel

other than Tektronix representatives to install, repair or service the product; b) to repair

damage resulting from improper use or connection to incompatible equipment; c) to

repair any damage or malfunction caused by the use of non-Tektronix supplies; or d) to

service a product that has been modified or integrated with other products when the

effect of such modification or integration increases the time or difficulty of servicing the

product.

THIS WARRANTY IS GIVEN BY TEKTRONIX IN LIEU OF ANY OTHER

WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS

DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FIT-

NESS FOR A PARTICULAR PURPOSE. TEKTRONIX' RESPONSIBILITY TO

REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND EXCLU-

SIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THIS

WARRANTY. TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE FOR

ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS

ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

TDS2MEM User Manual i

General Safety Summary

Review the following safety precautions to avoid injury and prevent

damage to this product or any products connected to it.

To avoid potential hazards, use this product only as specified.

Only qualified personnel should perform service procedures.

To Avoid Fire or Personal Injury

Ground the Product. This product is indirectly grounded through the

grounding conductor of the mainframe power cord. To avoid electric

shock, the grounding conductor must be connected to earth ground.

Before making connections to the input or output terminals of the

product, ensure that the product is properly grounded.

Observe All Terminal Ratings. To avoid fire or shock hazard, observe all

ratings and markings on the product. Consult the product manual for

further ratings information before making connections to the product.

The common terminal is at ground potential. Do not connect the

common terminal to elevated voltages.

Do Not Operate Without Covers. Do not operate this product with covers

or panels removed.

Avoid Exposed Circuitry. Do not touch exposed connections and

components when power is present.

Do Not Operate With Suspected Failures. If you suspect there is damage

to this product, have it inspected by qualified service personnel.

Do Not Operate in Wet/Damp Conditions.

Do Not Operate in an Explosive Atmosphere.

Keep Product Surfaces Clean and Dry.

General Safety Summary

ii TDS2MEM User Manual

Symbols and Terms

Terms in This Manual. These terms may appear in this manual:

WARNING. Warning statements identify conditions or practices that

could result in injury or loss of life.

CAUTION. Caution statements identify conditions or practices that

could result in damage to this product or other property.

Terms on the Product. These terms may appear on the product:

DANGER indicates an injury hazard immediately accessible as you

read the marking.

WARNING indicates an injury hazard not immediately accessible as

you read the marking.

CAUTION indicates a hazard to property including the product.

Symbols on the Product. These symbols may appear on the product:

Battery Recycling

This product contains a non-replaceable Lithium battery. Please

dispose of the battery properly according to your local regulations.

CAUTION

Refer to Manual

Protective Ground

(Earth) Terminal

TDS2MEM User Manual iii

Contacting Tektronix

Phone: 1-800-833-9200*

Address Tektronix, Inc.

Department or name (if known)

14200 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

Website www.tektronix.com

Sales

Support

1-800-833-9200, select option 1*

Service

Support

1-800-833-9200, select option 1*

Technical

Support

Email: techsupport@tektronix.com

1-800-833-9200, select option 3*

6:00 a.m. - 5:00 p.m. Pacific time

* This phone number is toll free in North America. After office hours,

please leave a voice mail message.

Outside North America, contact a Tektronix sales office or distributor;

see the Tektronix web site for a list of offices.

Contacting Tektronix

iv TDS2MEM User Manual

TDS2MEM User Manual 1

Using the TDS2MEM Storage Memory and

Communications Module

The TDS2MEM Storage Memory and Communications module adds

removable Type 1 CompactFlash (CF) card storage memory, RS-232

remote programming capability, and RS-232 and Centronics printer

output connectivity to your TDS1000- or TDS2000-Series

oscilloscope.

NOTE. This module is not compatible with TDS200-Series

oscilloscopes.

Installing the Module

See the TDS200-, TDS1000- and TDS2000-Series Extension Module

Installation sheet for module installation instructions. The following

illustration identifies the TDS2MEM module output ports.

Centronics Port

Using the TDS2MEM Storage Memory and Communications Module

2 TDS2MEM User Manual

Installing and Removing the CompactFlash Card

Insert a Type 1 CompactFlash card into the slot until the card is flush

with the module case, as shown below. The CF card is keyed to be

inserted only one way. If the CF card does not easily slide into place,

remove and correctly reinsert it.

To remove the CompactFlash card, push and release the eject button

until the button fully extends, then push the eject button again to

release the CF card from the slot. Pull the CF card out of the

module slot.

Lip

Back side of card

Eject button

Card

Using the TDS2MEM Storage Memory and Communications Module

TDS2MEM User Manual 3

CompactFlash Card Initial Read Time

The TDS2MEM reads a CF card's internal structure every time you

insert a CF card. The time to complete the read depends on the size of

the CF card and how it was formatted. To significantly shorten the

initial read time of 64 MB and larger CF cards used in the TDS2MEM

module, format the CF card using the TDS2MEM format function

(UTILITY

 File Utilities  Format).

Formatting a CompactFlash Card

1. Insert a CF card into the module.

2. Push the UTILITY front panel button.

3. Select the File Utilities menu option.

4. Select the More menu option to display menu page 2.

5. Select the Format menu option.

6. Select the Yes menu option to format the CF card. Formatting

deletes all data on the CF card.

CompactFlash Card Capacities

The following are the approximate number of files, by type, that you

can store per 1 MB of CF card memory.

 5 Save All operations (see Saving Information Using the PRINT

Button on page 5)

 16 screen image files (actual capacity depends on the selected

image format) (see Saving a Screen Image to a File on page 7)

Using the TDS2MEM Storage Memory and Communications Module

4 TDS2MEM User Manual

 250 oscilloscope setting (.set) files (see Saving Oscilloscope

Settings on page 8)

 18 waveform (.csv) files (see Saving Waveform Files on page 9)

File Management Conventions

 The oscilloscope checks for available space on the CompactFlash

card before writing files, and displays a warning message if there

is not enough memory for the files you are writing.

 The term folder as used in this manual refers to a directory location

on the CF card.

 The default file save or recall location is the current folder.

 The root folder is A:\.

 The oscilloscope resets the current folder to A:\ when powering on

the instrument, or when inserting a CF card after the oscilloscope

is powered on.

 File names can have one to eight characters, followed by a period,

followed with an extension of one to three characters.

 Long file names created on PC operating systems are displayed

using the operating system's shortened file name.

 File names are upper case.

Using the TDS2MEM Storage Memory and Communications Module

TDS2MEM User Manual 5

Saving Information Using the PRINT Button

You use the Save All menu (SAVE/RECALL  Action = Save All) to

set the PRINT button to do one of three functions:

 Automatically save oscilloscope information to multiple files in a

folder.

 Save the screen image to a file.

 Print the screen image to the current printer port.

Options

Settings or

Submenus Comments

Print Button Saves All To

Files

Sets the print button to save all active

oscilloscope information (waveforms,

screen image, settings) to files in a new

subfolder in the current CF card folder.

See Saves All to Files on page 6.

Saves Image To

FIle

Sets the print button to send the screen

image to a file on the CF card.

Prints Sets the print button to send the screen

image to the current printer port.

Select Folder Lists the contents of the current CF card

folder and displays the following menu

items.

Change Folder See Managing Files and Folders on

page 14.

New Folder

Back Returns to the Save All menu.

About

Save All

Displays the help text for this task.

Using the TDS2MEM Storage Memory and Communications Module

6 TDS2MEM User Manual

Key Points

Saves All To Files. Setting the Print Button to Saves All To Files is a

fast and easy way to save all of the current oscilloscope information

to files with a single button push. Pushing the PRINT button creates a

new folder and saves the following information in separate files in that

new folder, using the current instrument and file format settings, as

listed in the following table:

.CSV Files. CSV (comma-separated value) files contain ASCII text

string that lists the time (relative to the trigger) and voltage values for

each of the 2500 waveform data points. You can import .csv files into

many spreadsheet and math analysis applications.

Screen Image Files. You can import screen image files into many

spreadsheet and word processing applications. The type of image file

you can import depends on you application.

.SET files. SET files contain an ASCII text string listing of the

oscilloscope settings.

Source File name

CH(x) FnnnnCHx.CSV, where nnnn is an automatically-

generated number, and x is the channel number.

MATH FnnnnMTH.CSV

Ref(x) FnnnnRFx.CSV, where x is the reference memory letter.

Screen Image FnnnnTEK.???, where ??? is the current Save Image file

format.

Settings FnnnnTEK.SET

Using the TDS2MEM Storage Memory and Communications Module

TDS2MEM User Manual 7

Saving a Screen Image to a File

You use the Save Image menu (SAVE/RECALL  Action = Save

Image) to save the oscilloscope screen image to a default file named

TEKnnnn.???, where .??? is the specified graphics file format. You

can import screen image files into many spreadsheet and word

processing applications.

Options

Settings or

Submenus Comments

File Format BMP, PCX,

TIFF, RLE,

EPSIMAGE

Sets the screen image graphics file

format.

About Saving

Images

Displays the help text for this task.

Select Folder Lists the contents of the current CF card

folder and displays the following menu

items.

Change Folder See Managing Files and Folders on

page 14.

Layout Select portrait or landscape image

layout.

Ink Saver

On, Off

Toggles Ink Saver mode On or Off (color

models only).

New Folder See Managing Files and Folders on

page 14.

Save filename Saves the screen image to the

automatically generated file name in the

current CF card folder.

Using the TDS2MEM Storage Memory and Communications Module

8 TDS2MEM User Manual

Saving Oscilloscope Settings

You use the Save Setup menu (SAVE/RECALL  Action = Save

Setup) to save the current oscilloscope settings to file name

TEKnnnn.SET in the specified folder or in nonvolatile setup memory.

A setting file contains an ASCII text string that lists the oscilloscope

settings.

Options

Settings or

Submenus Comments

Save To Setup Specifies saving the current oscilloscope

settings to nonvolatile setup memory

File Specifies to save the current

oscilloscope settings to a file on the CF

card.

Setup 1 to 10 Specifies the nonvolatile setup memory

location.

Select Folder Lists the contents of the current CF card

folder and displays the following menu

items.

Change Folder See Managing Files and Folders on

page 14.

New Folder Returns to the Save All menu.

Save Saves the settings to the specified setup

memory location.

filename Saves the settings to the automatically

generated file name in the current CF

card folder.

Using the TDS2MEM Storage Memory and Communications Module

TDS2MEM User Manual 9

Saving Waveform Files

You use the Save Wfm menu (SAVE/RECALL  Action = Save

Wfm) to save the specified waveform to file name TEKnnnn.CSV, or

to reference memory. The module saves waveform data to files as

comma-separated values (.csv format), which is an ASCII text string

that lists the time (relative to the trigger) and voltage values for each

of the 2500 waveform data points. You can import .csv files into many

spreadsheet and math analysis applications.

Options

Settings or

Submenus Comments

Save To File Specifies to save the source waveform

data to a file on the CF card.

Ref Specifies to save the source waveform

data in reference memory.

Source CH(x), Ref(x),

MATH

Specifies which source waveform to

save.

Save To Ref(x) Specifies the reference memory location

in which to save the source waveform.

Select Folder Lists the contents of the current CF card

folder and displays the following menu

items.

Change Folder See Managing Files and Folders on

page 14.

New Folder

Save Saves the waveform to the specified

reference memory.

filename Saves the waveform data to the

automatically generated file name in the

current CF card folder.

Using the TDS2MEM Storage Memory and Communications Module

10 TDS2MEM User Manual

Recalling Oscilloscope Settings

You use the Recall Setup menu (SAVE/RECALL  Action = Recall

Setup) to load oscilloscope setup information from a file or memory

location.

Options

Settings or

Submenus Comments

Recall From Setup Specifies to recall oscilloscope settings

from nonvolatile memory.

File Specifies to recall oscilloscope settings

from a file on the CF card.

Setup 1 to 10 Specifies the nonvolatile memory

location from which to recall oscilloscope

settings.

Select Folder Lists the contents of the current CF card

folder from which to select a file, and

displays the following menu item.

Change Folder See Managing Files and Folders on

page 14.

Recall Recalls the settings from nonvolatile

memory.

filename Recalls the settings from the specified

CF card file.

Using the TDS2MEM Storage Memory and Communications Module

TDS2MEM User Manual 11

Recalling Waveform Files

You use the Recall Wfm menu (SAVE/RECALL  Action = Recall

Wfm) to load waveform data from a CF card file into the specified

reference memory location.

Displaying Reference Waveforms

You use the Display Refs menu (SAVE/RECALL  Action = Display

Refs) to toggle on or off display of the specified reference memory

waveform.

Options

Settings or

Submenus Comments

To Ref(x) Specifies the reference memory location

in which to load the waveform data.

Lists the contents of the current CF card

folder from which to select a file, and

displays the following menu items.

Change Folder See Managing Files and Folders on

page 14.

To

Ref(x)

Specifies the reference memory location

in which to load the waveform data.

Recall filename Loads the waveform data from the

specified file into reference memory.

Options

Settings or

Submenus Comments

Ref(x) On, Off) Toggles on or off display of the specified

reference memory waveform.

Using the TDS2MEM Storage Memory and Communications Module

12 TDS2MEM User Manual

Setting the Printer Options

You use the Printer Setup menu (UTILITY  Options  Printer Setup)

to configure the printer file format and port settings.

Options Settings or Submenus Comments

Print Button See page 5 for information

on the Print Button settings.

Print Port Centronics, RS-232 Communication port used to

connect the oscilloscope to a

printer.

Printer Format Thinkjet, Deskjet, Laser Jet,

Bubble Jet, Epson Dot,

DPU411, DPU412,

DPU3445, Epson C60,

Epson C80, BMP, PCX,

TIFF, RLE, EPSIMAGE

Type of printer connected to

the communication port. This

menu option is active when

the Print Button is set to

Prints.

File Format BMP, PCX, TIFF, RLE,

EPSIMAGE

Type of graphics image file

format. This menu option is

active when the Print Button

is set to Saves Image to

Files.

Layout Portrait, Landscape Printer output orientation.

Ink Saver On, Off Toggles On or off printing the

screen as a black image on a

white background. Only

available in TDS2000-Series

oscilloscopes.

Abort Printing Stops sending screen data to

the printer.

La page est en cours de chargement...

Tektronix TDS2MEM Manuel utilisateur

Ce manuel convient également à

Tektronix TDS2MEM Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents