Beam PTT-C1 Manuel utilisateur

Marque: Beam

Modèle: PTT-C1

Taper: Manuel utilisateur

Ce manuel convient également à

BEAM User Manual

DriveDOCK Extreme – Push-To-Talk Handset Kit

EXTRM-PTT-C1

Corded Push-To-Talk

Handset Kit

EXTRM-PTT-W1

Wireless Push-To-Talk

Handset Kit

BEAM Push-To-Talk (PTT) Kit for DriveDOCK Extreme

Installation and User Manual

Product names:

Corded Push-To-Talk Handset Kit

Wireless Push-To-Talk Handset Kit

Manual Part #: USRMAN008301

Manual revision: 1

Release date: July 2015

BEAM Communications Pty Ltd

5/8 Anzed Court, Mulgrave,

Victoria, 3170, AUSTRALIA

Information furnished by BEAM Communications Pty Ltd is believed to be accurate and reliable. However, no responsibility

is assumed by BEAM for its use, or for any infringement of patents or other rights of third parties, which may result from its

use. No license is granted by implication or otherwise under any patent or patent rights of BEAM. BEAM reserves the right to

change specications at any time without notice.

BEAM Push-To-Talk Handset Kit - User Manual

BEAM Communications

BEAM Communications, a wholly owned subsidiary of

World Reach Limited (WRR), listed on the Australian Stock

Exchange, is a world leader in design, manufacture and

distribution of specialized communications equipment for

the Iridium Satellite Network.

BEAM’s commitment to be at the forefront has continued

to increase its share of the global satellite communications

market. Its premium distribution network spans the world.

Recognized as a leading provider of satellite

communication solutions, BEAM specializes in Voice,

Data, Tracking and customized solutions. BEAM develops

innovative products and services to meet market

demands and niche applications.

BEAM’s leading edge products are deployed in a wide range

of markets including Maritime, Transport, Government,

Defence, Mining, Construction, Forestry, Emergency Services,

Relief Aid, Telemetry and Rural Telephony.

Supported by a dedicated team of professionals, BEAM has

developed solid relationships with its peers and network of

distributors worldwide.

BEAM Communications Pty Ltd

5/8 Anzed Court, Mulgrave,

Victoria, 3170, AUSTRALIA

Web: www.beamcommunications.com

Info: info@beamcommunications.com

Support: suppor[email protected]

Tel: +61 3 8588 4500

Fax: +61 3 9560 9055

General Operation (Wireless Handset only) 17

Dock Loudspeaker Operation

(Corded and Wireless Handset)

DriveDOCK Extreme Button LED Status

(PTT Mode)

DriveDOCK Extreme Button LED Status (Phone

Mode)

DriveDOCK Extreme Button Action & Response

(Phone Mode)

DriveDOCK Extreme Button Action & Response

(PTT Mode)

Technical Notes 22

Accessories 24

Type Acceptance 25

Radio and Television Interference 25

Important Safety and Handling Information 26

Informations importantes de sécurité et de

manutention

Specications 30

Contents

BEAM Communications 3

Contents 4

Conventions in this Manual 5

Terminology

Kit Contents 6

Safety Warnings 6

Product Overview 8

Dock PTT Mode versus Phone mode 9

BEAM WIRELESS PTT HANDSET 10

Wireless PTT Parts & functions 10

Wireless Charging Cradle Parts & Functions 10

BEAM CORDED PTT HANDSET 11

Installation 12

Firmware for DriveDOCK Extreme 12

Extended Iridium Extreme® Battery (Optional) 12

Mounting Bracket (wireless & corded) 12

Iridium Extreme® PTT Operation 14

Registering 14

PTT Mode 14

Phone Mode 15

PTT Operation 15

PTT Session Status 15

Using SOS 16

BEAM Push-To-Talk Handset Kit - User Manual

Conventions in this Manual

Warnings, cautions and notes appear throughout this

manual are represented by following conventions.

WARNING / CAUTION:

This symbol and associated text indicate a

warning note providing information to prevent

damage to equipment or personal injury.

IMPORTANT / TIP:

This symbol and associated text indicate a note

providing general operating information.

INTERFERENCE:

All wireless phones may get interference, which

could aect performance.

Terminology

TERM DESCRIPTION

PTT

Push-To-Talk

Eagle

Extreme Docks Conguration Tool - MS

Windows Install

GPS

Global Positioning System

Hands-free

Mobile

Originating

Describes a call initiated by the DriveDOCK

Extreme

Mobile

Terminating

Describes an incoming call being answered

by the DriveDOCK Extreme

Iridium Extreme®

PTT device

The Iridium Extreme® Satellite Telephone

Dock

Beam DriveDOCK Extreme

Corded Handset

BEAM Corded Push-To-Talk Handset

Wireless Handset

BEAM Wireless Push-To-Talk Handset

The ® symbol, mark and logos are owned

by the respective companies of which the

symbol follows. Any use of such marks by

BEAM Communications is under license.

Other trademarks and trade names are

those of their respective owners.

Radio Frequencies

Attention command

SMA

Sub Miniature version A co-axial RF

connection

RP-SMA

Reverse Polarity – Sub Miniature connectors.

FCC

Federal Communications Commission.

Independent agency of the US government

that regulates communications.

RSS

Radio Standards Specications. Industry

Canada’s documents that describe the

processes and requirements for compliance of

radio apparatus.

Kit Contents

Check that your chosen Extreme PTT Kit contains the

following:

PTT-C1 (corded)

1 x Corded PTT Handset

1 x PTT Bracket Kit

1 x Mounting Clip Kit

PPT-W1 (wireless)

1 x Wireless PTT Handset with Charging Cradle

1 x Interface cable

1 x External Magnetic Mount Antenna

1 x PTT Bracket Kit

Optional Extreme Dock Accessories

The following optional accessories are available for your

DriveDOCK Extreme:

• BEAM Privacy Handset Kit (RST755)

• Intelligent Handset (RST970)

• WHIP Antenna (RST714)

• Mag Mount Antenna (RST715)

• Bolt Mount Antenna (RST720)

• Dual Mode Whip Antenna (RST706)

• Dual Mode Mag Antenna (RST705)

• Active Antenna (RST740)

• Man Down Kit (RST410)

• Cable kits

See your service provider for pricing and availability of the

above quality BEAM accessories.

Additional Information

For the latest in supporting software and documentation

for Extreme PTT DriveDOCK please visit

www.beamcommunications.com/support/drivedockextreme

Other Resources Available Online

- Iridium Antenna Installation Guide and User Manual

- DriveDOCK Extreme User Manual and Quick Start Guide

- Iridium PTT user guide

Firmware

DriveDOCK Extreme requires Eagle version 2.0 or higher.

DriveDOCK Extreme must have the latest rmware version

1.4 or later.

Please download latest rmware at:

www.beamcommunications.com/eagle

Safety Warnings

IMPORTANT

Please read the following information carefully before

installing and using the Push-To-Talk Handset Kit in conjunction

with the DriveDOCK Extreme. Failing to follow instructions may

compromise the safety of the product and may result in personal

injury and/or equipment damage. Please consult your supplier if

you have any further questions.

The DriveDOCK Extreme is a low power docking station for the

Iridium Extreme® or Iridium Extreme® PTT device. When ON, it will

charge the Extreme handset whilst docked in the DriveDOCK.

• Store the system in a cool and dry area.

• Do not submerge the system in water.

• Do not place foreign metal objects or debris in the system.

If debris enters into the system, please return to factory for

service.

BEAM Push-To-Talk Handset Kit - User Manual

WARNING

DO NOT open the equipment. There are no user serviceable

parts inside. If a DC power supply is to be used, the output must

comply with the Safety Extra Low Voltage (SELV) requirements

of IEC60950. All connectors must only be connected to

equipment ports which comply with the Safety Extra Low

Voltage (SELV) requirements of IEC60950.

WARNING: POTENTIALLY EXPLOSIVE ATMOSPHERES

• Turn your 9575 Extreme device and Wireless PTT Handset

OFF and DO NOT remove the battery or remove the 9575

Extreme device / Wireless PTT Handset from the cradle

when you are in any area with a potentially explosive

atmosphere.

• Obey all signs and instructions.

• Sparks from your battery in such areas could cause an

explosion or re resulting in bodily injury or even death.

• Areas with a potentially explosive atmosphere are often

but not always clearly marked. They include, but are not

limited to:

» fuelling areas such as gasoline stations

» below deck on boats;

» fuel or chemical transfer or storage facilities;

» areas where fuel odours are present (for example,

if a gas/propane leak occurs in a car or home);

» areas where the air contains chemicals or

particles, such as grain, dust, or metal powders;

» any other area where you normally would be

advised to turn o your vehicle’s engine.

WARNING: ROAD SAFETY COMES FIRST!

Do not use a hand-held cellular terminal, satellite phone or

mobile when driving a vehicle, unless it is securely mounted

in a holder for speaker phone operation. Before making a call

with a handheld terminal, satellite phone or mobile, park the

vehicle stationary. Please obey local road laws for hands-free

speakerphone operation. Speakerphones (hands-free) must

be installed by qualied personnel. Faulty installation or

operation can constitute a safety hazard.

WARNING

Changes or modications not expressly approved by BEAM

Communications could void the product warranty.

WARNING: AIR BAG EQUIPPED VEHICLES

An air bag inates with great force. Do not store or mount the

Cradle / PTT system or any of the accessories in the area over

the air bag or in the air bag deployment area.

WARNING: HEADSET USE

Headsets and earpieces used with this product are capable of

delivering sounds at loud volumes. Exposure to such sounds

can result in permanent hearing loss damage. The volume

level may vary based on conditions such as the docks volume

settings and the environment.

Please read the following safety guidelines below prior to using

a headset or earpiece:

1. Prior to using this product follow these steps:

• Before putting on the headset, turn the volume

control to its lowest level,

• Put the headset on, and then slowly adjust the

volume control to a comfortable level.

2. During the use of this product:

• Keep the volume at the lowest level possible and

avoid using the headset in noisy environments where

you may be inclined to turn up the volume;

• If increased volume is necessary, adjust the volume

control slowly.

• If you experience discomfort or ringing in your ears,

immediately discontinue using the headset and

consult a physician.

With continued use at high volume, your ears may become

accustomed to the sound level, which may result in permanent

damage to your hearing without any noticeable discomfort.

Using a headset while operating a motor vehicle, motorcycle,

watercraft may be dangerous, and is illegal in some

jurisdictions. Check your local regulations and laws.

Product Overview

The BEAM PTT Handset Kit (Corded or Wireless versions)

transforms the BEAM DriveDOCK Extreme into a

conventional Push-To-Talk system, enabling an Iridium

Extreme® PTT device to be used for in-vehicle installations.

The BEAM PTT handset key features:

• Durable and reliable mic/speaker handset

• Enhanced clean audio quality

• Compatible with existing BEAM DriveDOCK Extreme

• Supports both Phone and PTT modes of the Iridium

Network

• Ability to amplify PTT audio to external cabin

loudspeaker

• Left or Right side bracket mounting to the Dock

BEAM DriveDOCK Extreme requires rmware version 1.4

or higher to be compatible with the Iridium Extreme® PTT

device.

Two Kit Types:

EXTRM-PTT-C1

Corded Push-To-Talk Handset Kit for DriveDOCK Extreme

EXTRM-PTT-W1

Wireless Push-To-Talk Handset Kit for DriveDOCK Extreme

BEAM Push-To-Talk Handset Kit - User Manual

Dock PTT Mode versus Phone mode

FUNCTION EXTREME DOCK in PTT MODE

Wired Alert Loop Disabled (No alert/SOS functionality exists in the 9575 Extreme device when in PTT mode.)

Mute Function

Disabled. If the button is pressed during PTT mode, the mute button will ash 3 times in ORANGE

and sound the “Triple beep rising tones” to the Dock buzzer & the current loudspeaker to indicate

the 9575 Extreme device is in PTT mode.

Bluetooth®Audio Disabled

Privacy Handset Disabled (lifting the Privacy handset will cause the mute button to ash indicting PTT Mode).

Volume Buttons

During PTT mode, the volume changes aect BOTH the dock’s external speaker AND the PTT

handset’s speaker.

Tracking

Tracking is not supported during PTT mode (both instant tracking and interval tracking messages

are suspended).

Track Button

Disabled. If the Track button is pressed during PTT mode, the mute button will ash 3 times in

ORANGE and sound the “Triple beep rising tones” to the Dock buzzer & the current loudspeaker to

indicate the 9575 Extreme device is in PTT mode.

Horn Alert Disabled

Entertainment Mode Disabled

Cabin Handsfree

audio

Disabled.

When the 9575 Extreme device is in PPT mode, some of the Extreme Dock functions are altered:

IMPORTANT

During PTT mode, all Alert Loop functionality is DISABLED. If the alert loop is triggered in PTT mode there are no messages sent, no

beeping tones, no ashing LED.

Beam Wireless PTT Handset

Wireless PTT Handset Parts & Functions

1 - Volume down (Blue button) : adjusts speaker audio to a

softer minimum setting.

2 - Volume up (Blue button) : adjusts speaker audio louder.

3 - Microphone: Speak in normal volume as you would on a

phone.

4 - PTT Button (Black button) : 3 quick beeps when pressed.

When out of range the Wireless PTT Handset will sound a slow

beeping tone alert.

5 - O/On (Grey button) : hold for about 5 seconds to turn

on or o. The Wireless PTT Handset will sound escalating or

de-escalating tones

6 - DC charging points: place handset into charging cradle to

automatically re-charge.

7 - 6 Pin Industrial connector: use with optional headsets/

accessories.

8 - Earpiece jack: allows private listening via 3.5mm earpieces.

Inserting the 3.5mm jack mutes the loudspeaker.

9 - Loudspeaker: Delivers loudspeaker audio. Automatically

mutes when inserted into charging cradle.

10 - Red Status LED light: The handset and the cradle LED

show the same notication. Glows red when connected and

operational. Flashes when “out of range” or when one unit is o.

11 - Antenna Connector: Allows connection of long range

external antenna in replacement of the short range stick

antenna.

Note:

1. When wearing your Wireless PTT handset, it will perform

best when worn with the handset antenna extending

above your shoulder.

2. The Orange Button is disabled. It is reserved for future use.

10 - Red Status

LED light

3 - Microphone

4 - PTT: Push-To-Talk Button

9 - Loudspeaker

6 - DC charging points

8 - Earpiece jack

7 - 6 Pin Industrial connector

(Optional)

Orange Button (disabled)

5 - O/On

Handset Antenna

10 - Red

Status LED

light

Manual

O/On

Wireless Charging Cradle Parts & Functions

Charging contacts

11- Antenna

Connector

Stick Antenna

1- Volume down

2- Volume up

BEAM Push-To-Talk Handset Kit - User Manual

WARNING

The BEAM Wireless PTT Handset and charging cradle are

designed to radiate low levels of radio energy in accordance

with global government approved regulatory standards. It

features Adaptive Power Output. APO automatically adjusts

the RF power output in accordance with signal required. This

features limits and reduces extraneous radiated radio energy.

This also helps minimize battery consumption and extends

battery shelf life.

Do not touch the antenna when operational. Keep Secure

Microphone antenna 25mm (1”) or more away from your

face and body to ensure exposure levels remain at or below

the maximum levels. Keep your body at least 20cm/8” from

external antennas connected to the charging cradle.

Ne touchez pas l’antenne lorsque opérationnel. Gardez sécurisé

antenne de microphone 25mm (1“) ou plus loin de votre visage

et le corps pour assurer des niveaux d’exposition restent égales

ou inférieures aux teneurs maximales. Gardez votre corps au

moins 20cm/8 “des antennes externes connectés à l’unité de

chargeur wireless.

IMPORTANT

Always attach the antenna to the charging cradle before

connecting the interface cable.

Beam Corded PTT Handset

The BEAM Corded Handset contains a microphone and

loudspeaker for independent conversion up to a stretched

distance of 1m from the Dock.

The status light will be ON whenever the PTT button has

been pressed.

IMPORTANT

During PTT mode, the optional Privacy Handset must be

placed in the mounting cup

Microphone

Status Light

Handset

Loudspeaker

Optional

Earpiece

Jack

PTT: Push-To-Talk

Button

Orange Button

(Disabled)

Installation

Firmware for DriveDOCK Extreme

The BEAM DriveDOCK Extreme requires Eagle version 2.0 or

higher to support Push-To-Talk operation.

This can be downloaded from the BEAM website:

www.beamcommunications.com/support/drivedockextreme

This rmware is also backward compatible with the

standard Iridium Extreme® Handset.

Extended Iridium Extreme® Battery (Optional)

The Iridium Extreme® PTT device may be tted with an

extended battery that protrudes above the rear surface of

the Iridium phone.

A device tted with this high capacity battery cannot be

docked in the cradle until the Hi Capacity inll has been

removed.

1. To accommodate the larger

battery, a Battery Inll must

be removed from the Dock.

Removal

2. Place a ngernail/

coin/screwdriver in

the slot and push

the inll towards the

centre of Dock.

Insertion

a) Locate the Battery Inll in the base of the Dock

b) Slide the Inll into the right side of the Docking area until it

‘Clicks’ into place

Step 1 – Place the spacer in the circular cavity at the

rear of the DriveDOCK Extreme.

Step 2 – Optional: t the Privacy Handset bracket if

desired.

a b

“CLICK”

RAM pivot

PTT Bracket

Spacer

DOCK

Privacy Handset

Bracket

PTT Bracket

Spacer

Mounting Bracket

(wireless & corded)

BEAM Push-To-Talk Handset Kit - User Manual

Step 3 – Position the PTT bracket to either the left or

right of the Dock depending on the user’s preference.

Step 4 – Complete the assembly with the RAM mount

ball and tighten the three M4x18 screws & washers

Mounting the clip for the Corded Handset

Step 1 – With the three M4x6 screws provided, attach

the clip to the PTT bracket.

Step 2 – Plug the curly cord into the RJ45 socket at the

base of the Dock.

The corded handset can now be hung from the clip on the PTT

bracket

Mounting the PTT Charging Cradle

With the supplied M2.5 Allen key (hex wrench), mount the PTT

cradle to the centre hole of the PTT bracket. The M4x25 screw is

rst placed through the magnet, then through the plastic of the

cradle and then into the centre threaded hole in the bracket.

Antenna installation for Wireless PTT

Step 1 - Securely tighten the antenna (with spherical

end) to the wireless handset as shown.

Left

Mounting

Right

Mounting

Handset Antenna

Step 2 – Connect either the stick antenna or the

external antenna cable to the base of the Wireless PTT

cradle depending on your installation preference.

Step 3 – Connect the interface cable from the base of

the Dock to the PTT cradle.

Step 4 - Place the Wireless Handset in the cradle to

charge Wireless Handset, ready for use.

IMPORTANT

The Iridium PTT service requires that the GPS signal is available

so that the service can determine the Extreme PTT devices’

geographical location in order to join the correct talk group(s).

Ensure that the Iridium signal antenna (Dock TNC connector),

and the GPS antenna (Dock SMA connector) for the Extreme

Dock are connected to BEAM approved cables and antennas.

IMPORTANT

When a docked PTT device is in PTT mode, a Beam Corded or

Wireless Handset must be connected to the RJ45 socket at the

base of the dock for correct operation.

Iridium Extreme® PTT Operation

Registering

Insert the Iridium Extreme® PTT device into the Dock,

and ensure the Dock is powered on (via vehicle key or

alternative power source). The dock will detect and boot

the Extreme PTT device to its last known mode.

PTT Mode

To change from Phone Mode to PTT Mode:

1. Press the left soft key, labelled Menu.

2. Press the left soft key, labelled Select.

3. Wait for the device to switch to PTT Mode.

Stick antenna

External antenna

BEAM Push-To-Talk Handset Kit - User Manual

4. The transition to PTT mode takes approximately 10

seconds. A “PTT” designation will appear at the top

center of the screen when the transition is complete

and the device will identify your Home Talkgroup at the

bottom of your screen (e.g., Talkgroup 1).

Phone Mode

To change from PTT Mode back to Phone Mode:

1. Press the left soft key (on the Iridium Extreme

® PTT

device)

2. Select the Switch to Phone option at the top of the

menu list.

PTT Operation

To start a Push-to-Talk call, push and hold the Push-to-Talk

(PTT) Button on the BEAM handset, and continue to hold

the button until you are granted the oor to talk. Initially, you

will hear a series of connecting tones that will beep on one

second intervals, followed by either a Talk Tone (three notes

in ascending tone in rapid succession) or a Reject Tone (two

notes in descending tone in rapid succession) that will occur

if the service is busy or unavailable (a corresponding message

will be displayed on the screen when this occurs).

After receiving the Talk Tone, continue holding the PTT

Button and be sure to keep the button pressed while you

are speaking and to release it when you are nished. You will

have up to 20 seconds to speak during each transmission

before the oor becomes open for others to speak.

If you have congured your device with Talk Timer Enabled,

the time remaining to speak in the current talk period is

displayed on the screen below the Device Name.

When 20 seconds has elapsed, Time Expired is displayed on

the screen and the device moves to the OPEN status, giving

others in the talkgroup session a chance to speak.

PTT Session Status

A talkgroup is a collection of Iridium Extreme® PTT devices

that have been provisioned to transmit content to each other

within a specied geographic area(s). Refer to the Iridium

Extreme

® PTT User Guide for more information.

When your Iridium Extreme

® PTT device is monitoring a

talkgroup (not in Scan State), the screen displays one of four

states: IDLE, LISTENING, TALKING and OPEN.

IDLE: When a talkgroup is not active in the network, the

devices that have the talkgroup as their Home Talkgroup will

display IDLE.

LISTENING: When a talkgroup is active and a participant has

the oor, the devices that are participating in the talkgroup

will display LISTENING.

TALKING: When a talkgroup is active and a participant has

the oor, the device that has the oor will display TALKING.

OPEN: When a talkgroup is active but no one has the oor,

the devices that have the talkgroup as their Home Talkgroup

will display OPEN.

Using SOS

If you attempt to press the SOS button while in PTT Mode, you

will receive the following notication: “WARNING! Must go to

Phone Mode for SOS.”

To change the Iridium service to Phone mode, Press the left

soft key (on the Iridium Extreme

® PTT device), labelled Phone,

to switch to Phone Mode. While transitioning, you will be

prompted to “Press SOS again when in Phone Mode”. You must

press the SOS button again in Phone Mode to successfully

initiate an SOS call.

IMPORTANT

The Dock Alert loop will not trigger an alarm while the phone is in

PTT mode

Tracking Functionality

When in PTT mode, the tracking functionality (interval and

instant tracking messages) is DISABLED.

Navigating to Phone Mode to Dial

If you attempt to dial a phone number while in Push-To-Talk

mode, you will receive the following notication: “Dialing not

supported. Must go to Phone mode to dial”.

Press the left soft key, labelled Phone to switch to Phone

Mode. As you are transitioning, you will be prompted to “Dial

number again when in Phone Mode”. Numbers dialled in PTT

Mode must be re-entered once you switch to Phone Mode,

and the call must be initiated in Phone Mode to connect

successfully.

IMPORTANT

For a comprehensive description of all the features of the Push-

To-Talk functionality in the 9575 Extreme device, see the Iridium

Extreme

® PTT User manual.

BEAM Push-To-Talk Handset Kit - User Manual

General Operation

(Wireless Handset only)

Power On & O

The Wireless PTT Handset and charging cradle powers on with

the BEAM Extreme Dock. Note that the Wireless PTT Handset

does not power o when the Extreme Dock is turned o. You

can manually turn o the charging cradle by pressing the front

grey button for 3 seconds and the red status LED will switch o.

You can do the same on the Wireless PTT Handset by pressing

the grey button. The handset will sound a de-escalating tone.

To power On, press the grey button and releasing the button

once the LED status lights turn on and the handset will sound

an escalating tone. The red status LED on both units will ash

momentarily and then go solid once they’re connected.

Volume Control

When you rst activate the unit you should rst ensure your

handset volume is set to a comfortable listening level. You may

then adjust the Wireless PTT Handset volume by pressing the

top right button to increase or the left to decrease. There are 5

listening levels. The minimum level is not zero but is designed so

you can still quietly hear radio trac and not inadvertently turn

o the audio.

Transmitting/Receiving

Use the handset like any two-way radio speaker microphone.

i.e. press the PTT button to talk and release to listen. A short talk

permit tone sequence will sound when activated. Speak with a

normal strong clear voice about 3-5cm (2”) from the microphone

port. Too hard or too soft will degrade the clarity of transmission.

NOTE: When the Wireless Handset is in the cradle, all

functionality is disabled and will switch to charging mode.

To make or receive calls, the user must take the Wireless PTT

Handset out of the cradle. If in use in a vehicle, please ensure to

clip the handset to your shirt for safety.

Out of Range Indication

The Wireless PTT Handset provides the user with audible

feedback should the user move out of range from their vehicle.

If you walk out of range the red status LED will ash. If you then

push the PTT an alert tone will sound to let you know your call is

not getting through. Depending on your location, you may nd

you need to walk back about 10 meters closer to your vehicle to

re-connect. The two red status LED light will then glow solid.

Talk Permit Tone

The Wireless PTT Handset provides talk permit tones so users

know when to start speaking so that words are not lost at the

start of a transmission. If, the channel is busy, no channel grant or

you are out of range, the user will hear the Wireless Handset talk

permit tones followed by the radio BUSY or Out of Range tone.

Charging Conrmation Tone

The Wireless PTT Handset provides the user with a discrete tone

whenever the handset is returned to the charging cradle. This

discrete tone ensures the user has a positive indication that the

handset is charging and seated correctly in the cradle.

Earpiece Operation

The Wireless PTT Handset provides the user with a weather

protected 3.5mm earpiece jack to allow use of industry

standard earpieces thereby providing additional privacy of

communications. A range of earpiece styles are available to suit

individual user preferences. Plugging in an earpiece disables the

internal loudspeaker.

Stealth Mode

For special applications the handset LED can be temporarily

disabled. This is achieved by holding down the VOLUME UP/

DOWN (both) while powering up the unit. To turn the LED

back on, simply power down and power back up.

Additional Headsets

The 6 pin industrial connector at the bottom of the wireless

handset also allows the use of a variety of heavy duty

and lightweight headsets and application specic audio

accessories to enhance your communications capability.

Use either the headset/accessory’s integral PTT or use

the wireless handset to transmit. The internal speaker is

immediately disabled when a headset is plugged in.

N.B. See page 7 for safety warning regarding use of headsets.

Accessory Mic Boost

Users can increase an audio accessory’s microphone gain

on the handset models tted with the Hirose accessory

port to cater for sensitivity requirements or variations

in headset manufacturer’s specications. To activate the

higher sensitivity, the Wireless Handset’s blue VOLUME UP

button should be held down while powering up. The user

will thereafter hear 2 short conrmation beeps at the end of

each start up tone sequence. To revert to normal sensitivity,

the unit should be powered up with the VOLUME DOWN

blue button held down.

NOTE: This does NOT aect the sensitivity of the handsets

normal internal front cover microphone.

Dock Loudspeaker Operation

(Corded and Wireless Handset)

The BEAM DriveDOCK Extreme includes the standard

loudspeaker (as used in normal Phone hands-free calling). This

loudspeaker can also be congured to provide audio in PTT

operation. This provides an extra output in addition to the

handset.

To use the DriveDOCK Extreme loudspeaker with the handset:

1. Press/hold the Dock Ringer button for 2 seconds. This

will change to the DriveDOCK Extreme loudspeaker

mode, and will be signied by playing the triple rising

tone in the DriveDOCK Extreme speaker and PTT speaker.

Also the Ringer LED will ash GREEN 3 times.

2. Audio is now set to output on both the DriveDOCK

Extreme speaker and the handset.

To revert to using the handset speaker only:

1. Press/hold the Dock Ringer button for 2 seconds. This

will change to the handset speaker mode, and will be

signied by playing the triple rising tone in the Wireless

Handset speaker (not the DriveDOCK Extreme speaker).

Also the Ringer LED will ash GREEN 3 times.

2. Audio is now set to be silent to the DriveDOCK Extreme

loudspeaker. The audio output setting is saved even

when the dock is switched o.

BEAM Push-To-Talk Handset Kit - User Manual

DriveDOCK Extreme Button LED Status

(PTT Mode)

GREEN ORANGE

Flashing

Telephony mode

detected from 9575

PTT mode detected

from 9575

GREEN RED BLUE ORANGE

ILLUMINATED N/A

Mic / Uplink

audio Mute

N/A N/A

GREEN RED BLUE ORANGE

FLASHING (slow)

Incoming call

ringing

N/A N/A

Privacy

Handset or

Intelligent

Handset in

use.

FLASHING (fast) N/A N/A

Ring tone

playback

N/A

BLUE ORANGE

ILLUMINATED

Connected with a paired BT device.

Ready for accepting incoming call or

switch to an active call

N/A

FLASHING (fast) Searching a paired BT device N/A

FLASHING (slow) BT device is being used in a call N/A

ALTERNATING

Bluetooth® in Discovery Mode

Blue Orange

BLUE ORANGE

FLASHING (slow) N/A

Error Mode (Check

Error log codes in

Eagle)

ALL BUTTONS BLUE ORANGE

FLASHING (slow) N/A

Charge Only Mode

– all LEDs ash (2 at

a time)

DriveDOCK Extreme Button LED Status (Phone Mode)

LOCATION BUTTON MODE ACTION LED/SOUND

Mute press

On/o

In a Call:

Mute the microphone

(uplink) on the Hands-

free, optional privacy

handset, or optional

Intelligent Handset

LED turns RED

Muted

LED turns OFF

Not muted

Up/Down In a Call:

Increase/decrease

volume on the audio

device in use

Audio will

sound louder/

softer with each

press.

Out of Call or Incoming

Ring:

Increase/decrease

volume of incoming ring

tone on the external or

internal speaker. (The

lowest setting will silence

the Ringer)

A beep

will sound

indicating the

increased/

decreased ring

tone volume of

the external or

internal speaker

– whichever is

currently set by

the Ring (Bell)

button.

Brightness Mode:

Increase/decrease the

LED intensity

All Button LEDs

brightness will

be increased/

decreased with

each press.

Brightness -

dual button

simultaneous

press (2

seconds)

Out of Call:

Enter LED brightness

change mode. Then Press

UP and/or DOWN arrows

to vary intensity.

Mode will automatically

exit after 5 seconds after

the last button press.

Status LED

ashes YELLOW

3 times and all

Button LED’s

will change

WHITE. A single

beep will sound

when entering

brightness

change mode.

A short double

beep will sound

when exiting

change mode.

LOCATION BUTTON MODE ACTION LED/SOUND

Ringer

Single Press

Not in Call:

Cycle through the

ring tones and

the output device

(internal buzzer and

external speaker).

The last Ringer type

sounded is then

saved.

Ring tone

playback and the

output device

changes. LED

FLASHING (fast)

BLUE when ring

tone is sounded.

Single Press

(no beep

sound)

When Bluetooth®

is OFF:

Turns ON

Bluetooth® function

LED changes

from OFF to FAST

FLASHING in BLUE

when searching

Bluetooth®

device(s). LED

turns solid BLUE

when connected

If Bluetooth®

connected but

NOT used in Call:

Transfer the audio

to the Bluetooth®

device

LED changes from

Solid BLUE to

SLOW FLASHING

in BLUE

Bluetooth® Device

being Used in Call:

Transfer the audio

to HF mode, or

Privacy/Intelligent

handset if activated

LED changes from

Slow Flashing to

solid BLUE

Single Press

1.5 sec

(until 1 beep

sounds)

Bluetooth® func-

tion is ON:

Turns OFF

Bluetooth® function

LED turns OFF

Single Press

5 sec

(until 2 beep

sounds)

Bluetooth® func-

tion is ON:

Bluetooth® is set

to discovery mode

for pairing to

Bluetooth® devices

LED is FAST

FLASHING

ORANGE and

BLUE, and then

turns solid BLUE

when paired and

connected.

Single Press

10sec

(until 3 beep

sound)

Bluetooth® is ON

or OFF: Clear all

paired Bluetooth®

devices and turn o

Bluetooth® function

LED turns OFF

DriveDOCK Extreme Button Action & Response

(Phone Mode)

La page charge ...

Beam PTT-C1 Manuel utilisateur

Marque: Beam

Modèle: PTT-C1

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Beam PTT-C1 User manual

Beam PTT-C1 Manuel utilisateur

Ce manuel convient également à

Beam PTT-C1 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents