Panasonic Stereo Integrated Amplifier SU-R1000 Mode d'emploi

Taper
Mode d'emploi

Ce manuel convient également à

SU-R1000
Stereo Integrated Amplifier Operating Instructions
Stereo-Vollverstärker Bedienungsanleitung
Amplificateur Stéréo Intégré Mode d’emploi
Amplificatore stereo integrato Istruzioni per l’uso
Geïntegreerde Stereo Versterker Gebruiksaanwijzing
Amplificador Estéreo Integrado Instrucciones de funcionamiento
Integrerad Stereoförstärkare Bruksanvisning
Integreret stereoforstærker Betjeningsvejledning
Integroitu stereovahvistin Käyttöohjeet
Zintegrowany wzmacniacz stereo Instrukcja obsługi
02
Music is borderless and timeless, touching people’s
hearts across cultures and generations.
Each day the discovery of a truly emotive experience
from an unencountered sound awaits.
Let us take you on your journey to rediscover music.
03
Delivering the Ultimate Emotive Musical
Experience to All
At Technics we understand that the listening experience is not
purely about technology but the magical and emotional relationship
between people and music.
We want people to experience music as it was originally intended
and enable them to feel the emotional impact that enthuses and
delights them.
Through delivering this experience we want to support the
development and enjoyment of the world’s many musical cultures.
This is our philosophy.
With a combination of our love of music and the vast high-
end audio experience of the Technics team, we stand committed
to building a brand that provides the ultimate emotive musical
experience by music lovers, for music lovers.
Director
Michiko Ogawa
04
(04)
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
About descriptions in these operating instructions
- Pages to be referred to are indicated as “ ○○”.
- The illustrations shown may differ from your unit.
For the United Kingdom and Ireland customer
Sales and Support Information
Customer Communications Centre
For customers within the UK: 0333 222 8777
For customers within Ireland: 01 447 5229
Monday–Friday 9:00 am – 5:00 pm, (Excluding public holidays).
For further support on your product, please visit our website: www.technics.com/uk/
High-Quality Audio Technologies
Employed integrated amplifier
The JENO Engine transmits and processes audio
signals in full digital and with minimal jitter from
the input stage to the power stage. GaN-FET
Driver for the linear speaker drive with high-
speed lossless switching, and ADCT (Active
Distortion Cancelling Technology) cancels the
noise precisely are implemented to achieve the
energetic dynamic sound with the superior drive
function.
The low-noise and clear sound can be provided
by the various technologies such as LAPC that
conducts speaker load adaptive phase calibration
for ideal gain and phase characteristics of any
type of connected speakers.
Low-noise power supply with high
responsive ability to the audio signal
Advanced Speed Silent Power Supply” is
embedded for high-speed lossless switching
and noise reduction. The unique power supply
function can supply the stable power with the
lowest noise by the high speed switching feature
for the better resolution of audio signal in full
digital amplifier.
And this unit improves the potential of JENO
Engine for the better playback.
The unique digital technology
Intelligent PHONO EQ” improves
the potential for playback of
records.
Accurate EQ Curve” which has a hybrid
component for analogue and digital circuits
enables the equaliser process with high-precise
and S/N. And this unit supports the various
equaliser curve other than RIAA for accurate
playback.
“Crosstalk Canceller” function which measures
the crosstalk and optimises it with DSP, and
“PHONO Response Optimiser” function reduces
the resonances on the cartridge are implemented
to reproduce the audio signal from the record
groove.
Features
English
05
(05)
Table of contents
Safety precautions 06
Please carefully read the “Safety precautions” of this
manual before use.
Control reference guide 08
This unit, Remote control
Connections 12
Speaker connection, AC mains lead connection
Operations 13
Playing back connected devices
Settings 20
Other settings
Troubleshooting 25
Before requesting service, read the troubleshooting.
Others 28
Specifications, etc.
Accessories
AC mains lead (2)
K2CM3YY00041
Except for Switzerland
K2CS3YY00033
For Switzerland
Remote control (1)
N2QAYA000224
Batteries for remote control (2)
Calibration record (1)
TSPX101
&DOLEUDWLRQ5HFRUG
Product numbers provided in these operating
instructions are correct as of October 2020.
These may be subject to change.
Do not use AC mains lead and calibration record
with other equipment.
Disposal of Old Equipment and Batteries
Only for European Union and countries
with recycling systems
These symbols on the products,
packaging, and/or accompanying
documents mean that used
electrical and electronic products
and batteries must not be mixed
with general household waste.
For proper treatment, recovery
and recycling of old products and
used batteries, please take them
to applicable collection points in
accordance with your national
legislation.
By disposing of them correctly, you
will help to save valuable resources
and prevent any potential negative
effects on human health and the
environment.
For more information about
collection and recycling, please
contact your local municipality.
Penalties may be applicable for
incorrect disposal of this waste,
in accordance with national
legislation.
Note for the battery symbol
(bottom symbol):
This symbol might be used in
combination with a chemical
symbol. In this case it complies
with the requirement set by the
Directive for the chemical involved.
06
Safety precautions
(06)
Warning
Unit
To reduce the risk of fire, electric shock or
product damage,
- Do not expose this unit to rain, moisture,
dripping or splashing.
- Do not place objects filled with liquids, such
as vases, on this unit.
- Use only the recommended accessories.
- Do not remove covers.
- Do not repair this unit by yourself. Refer
servicing to qualified service personnel.
- Do not let metal objects fall inside this unit.
- Do not place heavy items on this unit.
AC mains lead
To reduce the risk of fire, electric shock or
product damage,
- Ensure that the power supply voltage
corresponds to the voltage printed on this
unit.
- Insert the mains plug fully into the socket
outlet.
- Do not pull, bend, or place heavy items on the
lead.
- Do not handle the plug with wet hands.
- Hold onto the mains plug body when
disconnecting the plug.
- Do not use a damaged mains plug or socket
outlet.
The mains plug is the disconnecting device.
Install this unit so that the mains plug can be
unplugged from the socket outlet immediately.
Ensure the earth pin on the mains plug is
securely connected to prevent electrical shock.
- An apparatus with CLASS I construction shall
be connected to a mains socket outlet with a
protective earth connection.
Caution
Unit
Do not place sources of naked flames, such as
lighted candles, on this unit.
This unit may receive radio interference caused
by mobile telephones during use. If such
interference occurs, please increase separation
between this unit and the mobile telephone.
This unit is intended for use in moderate and
tropical climates.
Do not put any objects on this unit. This unit
becomes hot while it is on.
Do not touch the top surface of this unit. This
unit becomes hot while it is on.
Placement
Place this unit on an even surface.
To reduce the risk of fire, electric shock or
product damage,
- Do not install or place this unit in a bookcase,
built-in cabinet or in another confined space.
Ensure this unit is well ventilated.
- Do not obstruct this units ventilation
openings with newspapers, tablecloths,
curtains, and similar items.
- Do not expose this unit to direct sunlight, high
temperatures, high humidity, and excessive
vibration.
Ensure that the placement location is sturdy
enough to accommodate the weight of this unit
( 28).
Do not lift or carry this unit by holding the
knobs. Doing so may cause this unit to fall,
resulting in personal injury or malfunction of
this unit.
Battery
Danger of explosion if battery is incorrectly
replaced. Replace only with the type
recommended by the manufacturer.
Mishandling of batteries can cause electrolyte
leakage and may cause a fire.
- Remove the battery if you do not intend to
use the remote control for a long period of
time. Store in a cool, dark place.
- Do not heat or expose to flame.
- Do not leave the battery(ies) in a car exposed
to direct sunlight for a long period of time
with doors and windows closed.
- Do not take apart or short circuit.
- Do not recharge alkaline or manganese
batteries.
- Do not use batteries if the covering has been
peeled off.
- Do not mix old and new batteries or different
types at the same time.
English
07
Safety precautions
(07)
When disposing of the batteries, please contact
your local authorities or dealer and ask for the
correct method of disposal.
Avoid the use in the following conditions
- High or low extreme temperatures during use,
storage or transportation.
- Replacement of a battery with an incorrect
type.
- Disposal of a battery into fire or a hot oven, or
mechanically crushing or cutting of a battery,
that can result in an explosion.
- Extremely high temperature and/or extremely
low air pressure that can result in an explosion
or the leakage of flammable liquid or gas.
Installation
Unit
Turn off all equipment before connection and
read the appropriate operating instructions.
For the dimensions of this unit ( 28)
Refer to the following figure for the dimensions
of this unit’s legs.
A
B
Front
A: 340 mm
B: 313 mm
Calibration record
Though the record may be warped depending
on the storage environment or usage due to
its characteristics, this record is designed to be
played back for “Cartridge Optimiser” even if
there is a trivial warp.
Stand this record as straight up for storage.
Stacking the records in piles or inclining the
record for storage may cause the warp on the
record.
For the United Kingdom and Ireland
customer
Caution for AC Mains Lead
(For the AC mains plug of three pins)
For your safety, please read the following text
carefully.
This appliance is supplied with a moulded three
pin mains plug for your safety and convenience.
A 10-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please
ensure that the replacement fuse has a rating of
10-ampere and that it is approved by ASTA or
BSI to BS1362.
Check for the ASTA mark
or the BSI mark
on the body of the fuse.
If the plug contains a removable fuse cover you
must ensure that it is refitted when the fuse is
replaced.
If you lose the fuse cover the plug must not be
used until a replacement cover is obtained.
A replacement fuse cover can be purchased from
your local dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to
the type of AC mains plug (figures A and B).
Confirm the AC mains plug fitted and follow the
instructions below.
Illustrations may differ from actual AC mains
plug.
1. Open the fuse cover with a screwdriver.
Figure A Figure B
Fuse cover
2. Replace the fuse and close or attach the fuse
cover.
Figure A Figure B
Fuse
(10 ampere)
Fuse
(10 ampere)
08
Control reference guide
This unit
(08)
  
 

  
01 Standby/on button ( )
[
] (off): The unit is off.
[
] (on): The unit is on.
The unit is still using a small amount of
power in off mode. Off mode uses less
power.
02 Power indicator
Blue: The unit is on.
Off: The unit is off.
03 Headphones jack
When a plug is connected, the speakers and
REC OUT/PRE OUT terminals do not output
sound. ( 19)
Sound is not output from headphones jack
while “MAIN IN” is selected as input source
of this unit. ( 18)
Excessive sound pressure from earphones
and headphones can cause hearing loss.
Listening at full volume for long periods may
damage the user’s ears.
04 Volume knob
-- dB (min), -88.0 dB to 0 dB (max)
05 Display
Information such as input source, etc. is
displayed. ( 26)
The input source blinks on the display before
starting up this unit after turning on. (No
sound outputs while blinking.)
06 Input selector knob
Turn this knob clockwise or anticlockwise to
switch the input source.
07 Peak power meter
Display the output level. 100 % is the rated
output ( 28).
Peak power meter does not work while the
light is turned off by pressing [DIMMER],
connecting the headphones, etc.
08 LAPC indicator
( 22)
09 Remote control signal sensor
Reception distance: Within approx. 7 m
directly in front
Reception angle: Approx. 30° left and right
English
09
Control reference guide
(09)


 
 

   
 
10 Speaker output terminals
( 12)
11 Analogue audio input terminals (REC IN)
( 15, 19)
12 Analogue audio output terminals
(REC OUT)
( 19)
13 Analogue audio output terminals
(PRE OUT)
( 19)
14 Analogue audio input terminals
(MAIN IN)
( 18)
15 Analogue audio input terminals
(LINE XLR BALANCED/LINE1/LINE2)
( 15)
16 Analogue audio input terminals
(PHONO XLR BALANCED/PHONO) /
PHONO EARTH terminal
( 16)
PHONO EARTH terminal is for connecting
the ground wire of a turntable.
Please use the cable less than 3 m.
Keep the PHONO short pins out of reach of
children to prevent swallowing.
17 USB-B terminals (PC1/PC2)
( 14)
18 USB-A terminal (UPDATE)
(
DC 5 V 500 mA)
( 23)
19 System terminal (CONTROL)
( 24)
20 Optical digital input terminals
(OPT1/OPT2)
( 13)
21 Coaxial digital input terminals
(COAX1/COAX2)
( 13)
22 Product identification marking
The model number is indicated.
23 AC IN terminal (
)
( 12)
10
Control reference guide
Remote control
(10)

















Using the remote control
2
1
R03/LR03, AAA
(Alkaline or manganese batteries)
Note
Insert the battery so the terminals (
and )
match those in the remote control.
Point it at the remote control signal sensor on
this unit. ( 08)
Keep the batteries out of reach of children to
prevent swallowing.
01 [
]: Standby/on button
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the
unit is still consuming a small amount of
power.
02 Switch the input source
( 13, 14, 15, 16, 19)
11
English
Control reference guide
(11)
03 [MENU]: Enter menu ( 13, 14, 15, 16, 18)
04 [
], [ ], [ ], [ ]/[OK]: Selection/OK
05 [SETUP]: Enter setup menu ( 20)
06 [BASS]/[MID]/[TREBLE]: Adjust the tonal
range (BASS/MID/TREBLE).
Press [
], [ ] to adjust the tone.
07 [DIRECT]: Turn on/off Direct mode
08 [LAPC]: Measure the output signal of the
amplifier when speakers are connected,
and correct its output ( 22)
09 [DIMMER]: Adjust the brightness of the
peak power meter light, display, etc.
When the display is turned off, it will
light up for a few seconds only when you
operate this unit. Before the display turns
off, “Display Off” will be displayed for a few
seconds.
Press repeatedly to switch the brightness.
Peak power meter does not work while the
light is turned off.
10 [INFO]: View content information
Press this button to display sampling
frequency and other information. (The
information varies depending on the input
source.)
11 [RETURN]: Return to the previous display
12 [MUTE]: Mute the sound
Press [MUTE] again to cancel. “MUTE” is
also cancelled when you adjust the volume
with this unit or when you turn the unit to
standby.
13 [CURVE]: Enable the PHONO equaliser
curve.
14 [+VOL-]: Adjust the volume
Volume range:
-- dB (min), -88.0 dB to 0 dB (max)
Buttons that work for Technics devices
supporting system control function
The remote control of this unit also works for
Technics devices supporting system control
function (Network Audio Player, Compact Disc
Player, etc.). For information on the operations of
the devices, please also refer to their operating
instructions.
01
Numeric buttons, etc.
02
Playback control buttons
Remote control mode
When other equipment responds to the supplied
remote control, change the remote control
mode.
The factory default is “Mode 1.
1 Press [SETUP].
2 Press [
], [ ] repeatedly to select
“Remote Control” and then press
[OK].
The current remote control mode of this unit
is displayed for a few seconds.
3 When “Set Mode 1/2” is displayed,
change the remote control mode of
the remote control.
To set “Mode 1:
Press and hold [OK] and [1] for at least
4 seconds.
To set “Mode 2”:
Press and hold [OK] and [2] for at least
4 seconds.
4 Point the remote control at this unit,
and press and hold [OK] for at least
4 seconds.
When the remote control mode is changed,
the new mode will appear on the display for
a few seconds.
When “Remote 1” or “Remote 2” is
displayed
When “Remote 1” or “Remote 2” is displayed,
the remote control modes of this unit and
remote control are different. Perform step 3
above.
12
Connections
Speakers/AC mains lead
(12)
Use only the supplied AC mains lead.
Insert the plugs of the cables to be connected all the way in.
Do not bend cables at sharp angles.
To optimise the audio output, you can measure the amplifier output signal and correct its
output when it is connected to the speakers. ( 22)
Speaker connection
Speakers
Speaker cables
(not supplied)
1 Turn the knobs to
loosen them, and
insert the core wires
into the holes.
2 Tighten the knobs.
Note
When the connections are completed, pull the
speaker cables lightly to check that they are
connected firmly.
Be careful not to cross (short-circuit) or reverse
the polarity of the speaker wires as doing so
may damage the amplifier.
DO NOT
Wire the polarity (+/-) of the terminals correctly.
Not doing so may adversely affect stereo
effects or cause malfunction.
For details, refer to the operating instructions of
the speakers.
Though the spade plug (A: 16 mm or less, B:
8 mm or more) can be connected, some plug
may not be connected depending on the shape
of plug.
AB
AC mains lead connection
Connect only after all other connections are
completed.
To a household
mains socket
AC mains lead
(supplied)
Insert the AC mains lead up to a
point just before the round hole.
Note
This unit consumes a small amount of AC power
( 28) even when the unit is in standby mode.
Remove the plug from the main electrical outlet
if you will not be using the unit for an extended
period of time. Place the unit so the plug can be
easily removed.
13
English
Connections / Operations
(13)
Operations
Using digital audio output device
Optical digital
audio cable
(not supplied)
CD player, etc.
Coaxial digital cable
(not supplied)
Using coaxial digital cable
1 Disconnect the AC mains lead.
2 Connect this unit and a CD player, etc.
3 Connect the AC mains lead to this unit.
( 12)
4 Press the unit on/off button to the
[
] position.
5 Press [COAX] to select
“COAX1”/“COAX2.
You can also select the input source by
turning the input selector knob on the unit.
6 Start playback on the connected
device.
Note
The digital audio input terminals of this unit can
only detect the following linear PCM signals.
For details, refer to the operating instructions of
the connected device.
- Sampling frequency:
Coaxial digital input
32/44.1/48/88.2/96/176.4/192 kHz
You can connect the CD player, etc. with coaxial digital cable (not supplied)/optical
digital audio cable (not supplied) to this unit and play back music.
Optical digital input
32/44.1/48/88.2/96 kHz
- Number of quantisation bits:
16/24 bit
Using optical digital audio cable
1 Disconnect the AC mains lead.
2 Connect this unit and a CD player, etc.
3 Connect the AC mains lead to this unit.
( 12)
4 Press the unit on/off button to the
[
] position.
5 Press [OPT] to select “OPT1”/“OPT2”.
You can also select the input source by
turning the input selector knob on the unit.
6 Start playback on the connected
device.
Adjusting the delay time of the
sound
Set to “Low Latency” to adjust the delay time of
the sound while “LAPC” is set to “On”.
1 Press [MENU].
2 Press [OK].
3 Press [
], [ ] to select “Normal”/“Low
Latency” and then press [OK].
Depending on the track, it may not be effective
even when setting.
MQA
®
decoding
An MQA file or stream can be decoded to deliver
the sound like the original master recording.
( 20)
14
(14)
Operations
Using PC, etc.
You can connect the PC, etc. or another device with USB 2.0 cable (not supplied) to
this unit and play back music.
PC, etc.
USB 2.0 cable
(not supplied)
Audio device with USB output
terminal such as ST-G30, etc.
Preparation
Connecting to a PC
Before connecting to a PC, follow the steps
below.
Refer to the following for the recommend OS
versions for your PC (as of October 2020):
- Windows 8, Windows 8.1, Windows 10
- OS X 10.7, 10.8, 10.9, 10.10, 10.11,
macOS 10.12, 10.13, 10.14, 10.15
Download and install the dedicated USB driver
to the PC. (Only for Windows OS)
Download and install the driver from the
website below.
www.technics.com/support/
Download and install the dedicated app
“Technics Audio Player” (free of charge) on
your PC.
Download and install the app from the
website below.
www.technics.com/support/
1 Disconnect the AC mains lead.
2 Connect this unit and a PC, etc.
3 Connect the AC mains lead to this unit.
( 12)
4 Press the unit on/off button to the
[
] position.
5 Press [PC] to select “PC1/“PC2”.
You can also select the input source by
turning the input selector knob on the unit.
6 Start playback using the dedicated
app “Technics Audio Player” on the
connected PC.
Note
When connecting an audio device with USB
output terminal such as ST-G30, etc., refer to
the operating instructions of the connected
device.
About supported format, refer to “Format
support. ( 28)
Adjusting the delay time of the
sound
Set to “Low Latency” to adjust the delay time of
the sound while “LAPC” is set to “On”.
1 Press [MENU].
2 Press [OK].
3 Press [
], [ ] to select “Normal”/“Low
Latency” and then press [OK].
Depending on the track, it may not be effective
even when setting.
MQA decoding
An MQA file or stream can be decoded to deliver
the sound like the original master recording.
( 20)
15
English
Operations
Using analogue audio output device
(15)
Analogue audio cable
(not supplied)
*
Blu-ray Disc player, etc.
*
: The illustration shows the example when
connecting with analogue audio cable. You
can also connect the device with XLR cable.
You can connect the Blu-ray Disc player, etc. with
analogue audio cable (not supplied) to this unit
and play back music.
1 Disconnect the AC mains lead.
2 Connect this unit and a Blu-ray Disc
player, etc.
3 Connect the AC mains lead to this unit.
( 12)
4 Press the unit on/off button to the
[
] position.
5 Press [LINE-XLR] or [LINE] to select
“LINE XLR”/“LINE1/“LINE2”.
You can also select the input source by
turning the input selector knob on the unit.
6 Start playback on the connected
device.
When the recorder is connected to
this unit
When connecting a recording equipment to this
unit, use the analogue audio cable (not supplied)
and connect REC IN terminal with the audio
output terminals of the connected equipment,
connect REC OUT terminals with the audio input
terminals of the connected equipment. ( 19)
Press [REC IN] to switch the input source to
“REC IN.
Minimising sound distortion
If sound distortion occurs when using the
analogue audio input terminals, setting the
attenuator to “On” may improve the sound
quality.
The factory default is “Off.
1 Press [MENU].
2 Press [
], [ ] repeatedly to select
Attenuator” and then press [OK].
3 Press [
], [ ] to select “On” and then
press [OK].
Reducing low frequency noise
Reduces the low frequency noise caused by the
warpage of record.
The factory default is “Off.
1 Press [MENU].
2 Press [
], [ ] repeatedly to select
“Subsonic Filter” and then press [OK].
3 Press [
], [ ] to select “On” and then
press [OK].
16
Operations
Using turntable
(16)
PHONO cable (not supplied)
*
PHONO earth lead
(not supplied)
Turntable
*
: The illustration shows the example when
connecting with PHONO cable. You can also
connect the device with PHONO-XLR cable.
1 Disconnect the AC mains lead.
2 Connect this unit and a turntable.
Remove the PHONO short pins when
connecting to the analogue audio input
terminals (PHONO).
PHONO terminals for connecting the
turntable supports MM/MC type cartridge.
(PHONO XLR terminals only supports MC
type cartridge.)
3 Connect the AC mains lead to this unit.
( 12)
4 Press the unit on/off button to the
[
] position.
5 Press [PHONO-XLR] or [PHONO] to
select “PHONO XLR/“PHONO”.
You can also select the input source by
turning the input selector knob on the unit.
6 Start playback on the connected
turntable.
When connecting a turntable with a built-in
PHONO equaliser, use the analogue audio
cable to connect to the analogue audio input
terminals (LINE1 or LINE2) of this unit. ( 15)
When connecting a turntable with a PHONO
earth lead, connect the PHONO earth lead to
the PHONO EARTH terminal of this unit.
Selecting the cartridge type
Select the settings (MM/MC) to fit the cartridge
type of the connected turntable.
1 Press [MENU].
2 Press [
], [ ] repeatedly to select
“MM/MC” and then press [OK].
3 Press [
], [ ] to select “MM”/”MC”
and then press [OK].
Not available when “PHONO XLR” is selected as
input source. (The setting is fixed to “MC”.)
When “MM/MC” is adjusted, “Cartridge
Optimiser” is fixed to “Off. Set “Cartridge
Optimiser” again or select the registered data
correspond with “MM/MC”. ( 17)
Adjusting the audio input level
If sound distortion occurs or the input level is low
when using the analogue audio input terminals,
adjusting the gain may improve the sound
quality.
1 Press [MENU].
2 Press [
], [ ] to select “Gain” and
then press [OK].
3 Press [
], [ ] to adjust and then press
[OK].
When “Gain” is adjusted, “Cartridge Optimiser”
is fixed to “Off. Set “Cartridge Optimiser”
again or select the registered data correspond
with “Gain”. ( 17)
Optimising the character of
cartridge
This unit measures and optimises the crosstalk
and frequency characteristics of cartridge by
playing the supplied calibration record on the
connected turntable.
Depending on the “Cartridge Optimiser”
setting, “REC OUT” turns to “Off” and the
sound does not output from the analogue
output terminals (REC OUT).
Preparation
Connect the PHONO earth lead of the turntable
to the PHONO EARTH terminal of this unit.
Set “MM/MC” of this unit in accordance with
the cartridge type of the turntable.
Set “Gain” of this unit in accordance with the
cartridge of connected turntable.
17
English
Operations
(17)
1 Press [MENU].
2 Press [
], [ ] repeatedly to select
Cartridge Optimiser” and then press
[OK].
3 Press [
], [ ] to select “Measurement
Start” and then press [OK].
“Prepare Calibration Record” is displayed.
4 Start playback the calibration record
on the connected turntable and then
press [OK].
Play the outer track first on the calibration
record which has 2 tracks on both sides
(approx. 3 minutes). Play another track if the
optmisation does not start properly.
The speakers output a test tone.
Measurement starts for the data of
“Crosstalk Canceller” and “Response
Optimisation.
5 After displaying “Lift up the tone
arm”, stop the playback of calibration
record and press [OK].
The measured data processing starts (approx.
10 minutes).
6
After displaying “Completed, press [OK].
7 After displaying “Register 1 - 3”, press
[OK] and then [ ], [ ] to select the
data to store.
The optimised data can be stored up to 3
type. The data is overwritten when selecting
the already registered data.
8 Press [OK].
“Registered” is displayed.
9
(When naming the data)
After displaying “Rename?”, press
[OK].
When the name is not edited, press [ ] to
exit. The measurement completes and the
optimised data is registered.
10
Press [ ], [ ], [ ], [ ] to enter the
name and then press [OK] to exit the
setting.
The edited name is stored, the measurement
completes and the optimised data is
registered.
“Crosstalk Canceller/
”Response Optimisation”
Press [MENU].
Press [ ], [ ] to select “Cartridge Optimiser
and then press [OK].
Press [ ], [ ] to select the registered data
and then press [
].
Press [ ], [ ] to select “Crosstalk
Canceller”/”Response Optimisation” and then
press [OK].
Press [ ], [ ] to select “On”/“Off” and then
press [OK].
“Crosstalk Canceller”:
Reduces the crosstalk occurs on the cartridge.
“Response Optimisation:
Optimises the resonance occurs on the
cartridge and cable, also adjusts the right and
left balance.
Call up the registered setting
Press [MENU].
Press [ ], [ ] to select “Cartridge Optimiser”
and then press [OK].
Press [ ], [ ] to select the registered data
and then press [OK].
Edit the name
Press [MENU].
Press [ ], [ ] to select “Cartridge Optimiser
and then press [OK].
Press [ ], [ ] to select the registered data,
then press and hold [OK].
Press [ ], [ ], [ ], [ ] to enter the name and
then press [OK].
Only ASCII characters can be used.
A” can be added when you press the [
] at
the time of the last letter is selected.
Press [CLEAR] to delete a letter.
Switching the PHONO equaliser
curve
You can switch the equaliser curve of this unit.
This unit supports the simulated equaliser curve
before unifying to RIAA.
The factory default is “RIAA.
1 Press [MENU].
2 Press [
], [ ] repeatedly to select “EQ
CURVE” and then press [OK].
3 Press [
], [ ] to select the equaliser
setting and then press [OK].
You can also switch the equaliser curve by
pressing [CURVE].
Reducing low frequency noise
Reduces the low frequency noise caused by the
warpage of record. ( 15)
18
Operations
Using this unit as power amplifier
(18)
Set the volume of the AV receiver,
control amplifier, etc. to minimum before
connecting.
While using this unit as power amplifier,
the volume adjustment with this unit is
disabled. Adjust the volume little by little
with the connected device.
Do not input the audio signal from REC
OUT/PRE OUT terminals to the MAIN IN
terminals of this unit. Doing so may cause
malfunction.
AV receiver, control
amplifier, etc.
Analogue audio cable
(not supplied)
1 Disconnect the AC mains lead.
2 Connect this unit and AV receiver,
control amplifier, etc. after minimising
the volume of the device.
3 Connect the AC mains lead to this
unit. ( 12)
4 Press the unit on/off button to the
[
] position.
5 Press [SETUP].
6 Press [
], [ ] repeatedly to select
“MAIN IN” and then press [OK].
7 Press [
], [ ] to select “On” and press
[OK].
8 Confirm the displayed message and
press [OK].
9 Press [
], [ ] to select “Yes” and then
press [OK].
10 Start playback on the connected
device.
Note
It is not possible to adjust the volume with this
unit.
Sound is not output from headphones jack and
REC OUT/PRE OUT terminals.
Minimising sound distortion
If sound distortion occurs, setting the attenuator
to “On” may improve the sound quality.
The factory default is “Off.
1 Press [MENU].
2 Press [OK].
3 Press [
], [ ] to select “On” and then
press [OK].
You can connect the AV receiver, control amplifier, etc. with analogue audio cable (not
supplied) to this unit and use this unit as power amplifier.
19
English
Operations
(19)
Using analogue audio input device
Do not input the audio signal from REC
OUT/PRE OUT terminals to the analogue
audio input terminals of this unit. Doing so
may cause malfunction.
Connecting a power amplifier,
subwoofer, etc.
You can connect the power amplifier, subwoofer,
etc. with analogue audio cable (not supplied) to
output the analogue audio signals.
Analogue audio cable
(not supplied)
Power amplifier,
Subwoofer, etc.
1 Disconnect the AC mains lead.
2 Connect this unit and a power
amplifier, subwoofer, etc.
3 Connect the AC mains lead to this unit.
( 12)
4 Press the unit on/off button to the
[
] position.
Note
For details, refer to the operating instructions of
the connected device.
The audio signal output from the power
amplifier, subwoofer, etc. connected to PRE
OUT terminals can be enable/disable. ( 21)
Connecting a recording equipment
When connecting a recording equipment to this
unit, use the analogue audio cable (not supplied)
and connect REC IN terminal with the audio
output terminals of the connected equipment,
connect REC OUT terminals with the audio input
terminals of the connected equipment.
Press [REC IN] to switch the input source to
“REC IN.
Analogue audio cable
(not supplied)
Recording equipment
Recording input
terminals
(REC IN, AUX IN)
1 Disconnect the AC mains lead.
2 Connect this unit and a recording
equipment.
3 Connect the AC mains lead to this unit.
( 12)
4 Press the unit on/off button to the
[
] position.
Note
The choppy audio occurs in output audio signal
when switching the input source.
The audio signal output from recording
equipment connected to REC OUT terminals
can be enable/disable. ( 21)
20
(20)
Settings
Sound adjustment, Other settings
1 Press [SETUP].
2 Press [
], [ ] repeatedly to select the menu and then press [OK].
3 Press [
], [ ], [ ], [ ] to select a desired item or value, and press [OK].
The sound effects and other settings can be set up.
Adjusting BASS/MID/TREBLE
“Tone Control
The tone can be adjusted by pressing [BASS]/
[MID]/[TREBLE].
The tone adjustment is enabled by pressing
[BASS]/[MID]/[TREBLE] and “Tone Control” is
set to “On.
Each level can be adjusted between “-10” and
“+10”.
While connecting Technics device supporting
system control function (Network Audio
Player, etc.) to this unit, sound setting on the
connected device may have a priority over this
unit. Adjust the sound with the connected
device.
Not available when using this unit as power
amplifier ( 18). Adjust the sound with the AV
receiver, control amplifier, etc.
Set “Tone Control” to “Off” to cancel the
adjustment of “BASS”, “MID” and “TREBLE”.
Adjusting balance of speakers
“Balance L/R”
Adjusts the balance of the output from left and
right speakers.
Each level can be adjusted between 18 dB (L)
and 18 dB (R).
The audio output from the connected
headphones and PRE OUT terminals are also
adjusted.
While using this unit as power amplifier ( 18),
this setting is disabled. Adjust the setting with
the connected device.
Adjusting the volume attenuator
“VOLUME Attenuator”
Set to “On (-20dB)” for the attenuator to ease
the volume adjustment at a low volume.
The factory default is “Off.
ATT” is displayed after setting.
Not available when using this unit as power
amplifier ( 18). Adjust the sound with the AV
receiver, control amplifier, etc.
MQA decoding
“MQA Decoding”
This unit includes the MQA (Master Quality
Authenticated) technology, which enables
playback of MQA audio files and streams,
delivering the sound like the original master
recording.
The built-in MQA decoder will restore the
highresolution signal heard in the studio and
confirm it, using the authentication signature.
Visit
www.mqa.co.uk/customer/mqacd for more
information.
To deliver the sound like the original master
recording, MQA decoding function needs to be
set to “On.
“MQA, “MQA Studio”, etc. are displayed while
playing back the MQA audio files and streams.
Selecting the speaker terminals to
output
“SPEAKERS
Select the speaker terminals from which audio
will be output.
The factory default is “A.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264

Panasonic Stereo Integrated Amplifier SU-R1000 Mode d'emploi

Taper
Mode d'emploi
Ce manuel convient également à