Pride C5 Le manuel du propriétaire

Including Models: C1, C5, C6, C11, C15, D30,

310, 560, 570, 660, 670, and 101

LIFT CHAIR

Pride Mobility Products Italia S.r.l.

Via del Progresso - ang. Via del Lavoro

Loc. Prato della Corte

00065 - Fiano Romano (RM)

Pride Mobility Products Europe B.V.

Castricummer Werf 26

1901 RW Castricum

The Netherlands

www.pridemobility.com

*INFMANU3686*

SERIES

SAFETY GUIDELINES

LIFT CHAIR SERIES

NOTE: This owner’s manual is compiled from the latest specifications and product information avail-

able at the time of publication. We reserve the right to make changes as they become necessary. Any

changes to our products may cause slight variations between the illustrations and explanations in

this manual and the product you have purchased. The latest/current version of this manual is avail-

able on our website.

The symbols below are used throughout this owner's manual and on the product to identify warnings and

important information. It is very important for you to read them and understand them completely.

WARNING! Indicates a potentially hazardous condition/situation. Failure to follow

designated procedures can cause either personal injury, component damage, or

malfunction. On the product, this icon is represented as a black symbol on a yellow

triangle with a black border.

MANDATORY! These actions should be performed as specified. Failure to perform

mandatory actions can cause personal injury and/or equipment damage. On the

product, this icon is represented as a white symbol on a blue dot with a white

border.

PROHIBITED! These actions are prohibited. These actions should not be performed

at any time or in any circumstances. Performing a prohibited action can cause

personal injury and/or equipment damage. On the product, this icon is represented

as a black symbol with a red circle and red slash.

Pride Mobility Products Corporation

INFMANU3686/Rev C/August 2009

Please fill out the following information for quick reference:

Pride Provider:_____________________________________________________________________

Address:__________________________________________________________________________

Phone Number:__________________________

Purchase Date:__________________________ Serial Number:_____________________________

088 609 661

Lift Chair Series www.pridemobility.com 3

LIFT CHAIR SERIES

LABEL INFORMATION

PRODUCT SAFETY SYMBOLS

The symbols below represent labels used on the product to identify warnings, mandatory actions, and pro-

hibited actions. It is very important for you to read and understand these symbols completely. Do not remove

these labels from your product. Please note that not all of the symbols may be used on your lift chair model.

Pinch/Crush Points Hazard! Do not place objects or appendages in the path

of moving parts.

Read and follow the information in the owner’s manual.

Maximum weight capacity

Do not connect an extension lead to the AC/DC converter or the battery

charger.

Electrical Hazard

Removal of grounding prong can create electrical hazard. If necessary,

properly install an approved 3-pronged adapter to an electrical outlet having

2-pronged plug access.

Properly dispose of all electronic components, including the external

transformer, hand control, batteries, actuator motors, and wiring. Contact

your authorized Pride Provider for more information.

4 www.pridemobility.com Lift Chair Series

LIFT CHAIR SERIES

LABEL INFORMATION

Battery Door Location

Green LED indicates power to the unit is on. Not applicable to all models.

Indoor Use Only. Avoid exposure to rain, snow, ice, salt, or standing water.

Maintain and store in a clean and dry environment.

Class II Equipment

Do not place objects under the lift chair. Make sure the area is clear of

obstructions, including pets and small children during operation.

Degree of protection against electric shock.

This product has been tested and complies to IEC 60601-1-2.

Do not place objects under the footrest when the lift chair is in the fully

reclined position. Make sure area is clear of obstructions, including pets and

small children during operation.

Lift Chair Series www.pridemobility.com 5

LIFT CHAIR SERIES

TABLE OF CONTENTS

SAFETY GUIDELINES .......................................................................................... 2

LABEL INFORMATION ......................................................................................... 3

I. INTRODUCTION................................................................................................ 6

SAFETY ....................................................................................................................................................................... 6

PURCHASER’S AGREEMENT.................................................................................................................................... 6

INFORMATION EXCHANGE....................................................................................................................................... 6

II. GENERAL GUIDELINES ................................................................................... 7

MODIFICATIONS......................................................................................................................................................... 7

WEIGHT LIMITATIONS ............................................................................................................................................... 7

PINCH/CRUSH HAZARDS .......................................................................................................................................... 7

DEGREE OF PROTECTION/MODE OF OPERATION ............................................................................................... 7

STORAGE AND OPERATION TEMPERATURES ...................................................................................................... 7

EMI/RFI ........................................................................................................................................................................ 8

SHIPPING AND DELIVERY......................................................................................................................................... 8

MOTOR VEHICLE TRANSPORT ................................................................................................................................ 8

III. YOUR LIFT CHAIR .......................................................................................... 9

BODY COMPONENTS ................................................................................................................................................ 9

ELECTRICAL COMPONENTS .................................................................................................................................. 10

IV. ASSEMBLY/DISASSEMBLY .......................................................................... 12

LIFT CHAIR SET UP.................................................................................................................................................. 12

LIFT CHAIR PLACEMENT......................................................................................................................................... 14

BATTERY INSTALLATION ........................................................................................................................................ 14

LIFT CHAIR DISASSEMBLY ..................................................................................................................................... 15

FABRIC REMOVAL/INSTALLATION......................................................................................................................... 16

V. OPERATION ................................................................................................... 19

OPERATION PRECAUTIONS ................................................................................................................................... 19

HAND CONTROL OPERATION ................................................................................................................................ 19

VI. TROUBLESHOOTING.................................................................................... 22

FREQUENTLY ASKED QUESTIONS........................................................................................................................ 22

VII. CARE AND MAINTENANCE ......................................................................... 24

FABRIC CARE ........................................................................................................................................................... 24

ELECTRONICS CARE............................................................................................................................................... 24

DISPOSAL AND RECYCLING................................................................................................................................... 24

VIII. WARRANTY ................................................................................................ 25

APPENDIX ........................................................................................................ 127

6 www.pridemobility.com Lift Chair Series

LIFT CHAIR SERIES

SAFETY

WELCOME to Pride Mobility Products Europe B.V. (Pride). The product you have purchased com-

bines state-of-the-art components with safety, comfort, and styling in mind. We are confident the

design features will provide you with the conveniences you expect during your daily activities.

Understanding how to safely operate and care for this product should bring you years of trouble-

free operation and service.

Read and follow all instructions, warnings, and notes in this manual and all other accompanying literature

before attempting to operate this product for the first time. In addition, your safety depends upon you, as well

as your provider, caregiver, or healthcare professional in using good judgement.

If there is any information in this manual which you do not understand, or if you require additional assistance

for setup or operation, please contact your authorized Pride Provider. Failure to follow the instructions,

warnings, and notes in this manual and those located on your Pride product can result in personal

injury or product damage and will void Pride’s product warranty.

PURCHASER’S AGREEMENT

By accepting delivery of this product, you promise that you will not change, alter, or modify this product or

remove or render inoperable or unsafe any guards, shields, or other safety features of this product; fail, refuse

or neglect to install any retrofit kits from time to time provided by Pride to enhance or preserve the safe use

of this product.

INFORMATION EXCHANGE

We want to hear your questions, comments, and suggestions about this manual. We would also like to hear

about the safety and reliability of your new lift chair and about the service you received from your authorized

Pride Provider. Please notify us of any change of address, so we can keep you apprised of important infor-

mation about safety, new products, and new options that can increase your ability to use and enjoy your lift

chair. Please feel free to contact us at the address below:

Pride Mobility Products Europe B.V.

Castricummer Werf 26

1901 RW Castricum

The Netherlands

NOTE: If you ever lose or misplace your product registration card or your copy of this manual, contact

us and we will be glad to send you a new one immediately.

I. INTRODUCTION

Lift Chair Series www.pridemobility.com 7

LIFT CHAIR SERIES

Your lift chair is a state-of-the-art life-enhancement device designed to increase mobility. Pride

provides an extensive variety of products to best fit your individual needs. Please be aware that

the final selection and purchasing decision regarding the type of lift chair to be used is the

responsibility of you, the lift chair user, if capable of making such a decision, and/or your health-

care professional (i.e., medical doctor, physical therapist, etc.).

MANDATORY! Read and follow the information provided in this owner’s manual

before attempting to operate your lift chair for the first time.

There are certain situations, including some medical conditions, where you will need to practice operating the

lift chair in the presence of a trained attendant. A trained attendant can be defined as a family member or

healthcare professional specially trained in assisting you with performing various daily living activities while

safely operating a lift chair.

Below are some precautions, tips, and other safety considerations that will help you become accustomed to

operating the lift chair in a safe manner.

MODIFICATIONS

Pride has designed and engineered your lift chair to provide maximum comfort and utility. However, to pre-

vent personal injury and/or damage to your lift chair, you should not modify, add, remove, or disable any

feature, part, or function of your lift chair. Unauthorized modifications may also void your product’s warranty.

NOTE: Use Pride parts only for all repairs and replacements.

WEIGHT LIMITATIONS

Your lift chair is rated for a maximum weight capacity. Refer to “Appendix A” for more information.

MANDATORY! Stay within the specified weight capacity of your lift chair. Pride will

not be held responsible for injuries and/or product damage resulting from failure to

observe weight limitations.

PINCH/CRUSH HAZARDS

The scissor and lift mechanisms are labeled as pinch/crush point hazards on your lift chair. Keep clear of

these areas and make sure the path of motion is unobstructed. See figure 3.1 for pinch/crush point locations.

WARNING! Do not place objects or appendages in the path of moving parts.

DEGREE OF PROTECTION/MODE OF OPERATION

 Class II equipment/Type B protection against electric shock

 Degree of protection against the ingress of solid/liquids—IPX1

 Mode of operation—Maximum Duty Cycle: 2min ON/18min OFF

STORAGE AND OPERATION TEMPERATURES

 Transportation or storage: -75°C/-104°F to 70°C/158°F

 Operation: 10°C/50°F to 40°C/104°F

II. GENERAL GUIDELINES

8 www.pridemobility.com Lift Chair Series

LIFT CHAIR SERIES

II. GENERAL GUIDELINES

ELECTROMAGNETIC AND RADIO FREQUENCY INTERFERENCE (EMI/RFI)

WARNING! Laboratory tests have shown that electromagnetic and radio frequency

waves can have an adverse affect on the performance of electrically-powered

devices, such as lift chairs.

Electromagnetic and Radio Frequency Interference can come from sources such as cellular phones, mobile

two-way radios (such as walkie-talkies), radio stations, TV stations, amateur radio (HAM) transmitters, wire-

less computer links, microwave signals, paging transmitters, and medium-range mobile transceivers used by

emergency vehicles. In some cases, these waves can cause unintended movement or damage to the control

system of electrically-powered devices. The lift chair user can help prevent electromagnetic interference by

maintaining a minimum distance between portable and mobile RF communications equipment. It is recom-

mended that at least 3 meters (9 feet) of distance be maintained between the lift chair and any handheld

equipment emitting 10 W or more of output power. Refer to the manufacturer’s literature for the handheld

device to determine the maximum output power of that device.

Every electrically-powered device has an immunity (or resistance) to EMI. The higher the immunity level, the

greater the protection against EMI. Per EMC standards, this product has passed immunity testing and is rated

as a Group 1, Class B product, meaning the lift chair uses RF energy only for its internal function. Therefore,

its RF emissions are very low and are not likely to cause any interference in nearby electronic equipment

making the lift chair suitable for use in all establishments, including domestic establishments and hospitals.

WARNING! Be aware that cell phones, two-way radios, laptops, and other types of

radio transmitters may cause unintended movement of your electrically-powered

device due to EMI. Exercise caution when using any of these items while operating

your lift chair.

WARNING! The addition of accessories or components to the lift chair can increase

the susceptibility of the chair to EMI. Do not modify your lift chair in any way not

authorized by Pride.

WARNING! Your lift chair itself can disturb the performance of other electrical

devices located nearby, such as alarm systems.

NOTE: If unintended motion occurs, discontinue use of the lift chair. Contact Pride to report the incident.

SHIPPING AND DELIVERY

Before using your lift chair, make sure your delivery is complete as some components may be packaged

individually. If you do not receive a complete delivery, please contact your authorized Pride Provider imme-

diately. Where damage has occurred during transport, either to the packaging or content, please contact the

delivery company responsible.

MOTOR VEHICLE TRANSPORT

If you will be transporting your lift chair in a motor vehicle, individual components (external transformer, etc.)

should be secured against slipping. The lift chair itself must also be secured against slipping (a possible

hazard during vehicle braking).

Lift Chair Series www.pridemobility.com 9

LIFT CHAIR SERIES

BODY COMPONENTS

This section describes the features of your lift chair. Carefully review the function and location

of each item described, and note that the illustrations and option locations shown in this manual

may not reflect the type of lift chair that you own.

III. YOUR LIFT CHAIR

Figure 3.1 Pride Lift Chair Main Components

DUAL MOTOR HAND CONTROL

EXTERNAL

TRANSFORMER

LIFT MECHANISM

(PINCH POINT)

LEG LEVELERS (FOUR TOTAL)

SCISSOR

MECHANISMS

(PINCH POINT)

POWER LEAD

LOW VOLTAGE

CONNECTION CABLE

STANDARD HAND CONTROL

HEAT AND MASSAGE HAND CONTROL

10 www.pridemobility.com Lift Chair Series

LIFT CHAIR SERIES

III. YOUR LIFT CHAIR

Lift Mechanism: Responds to the hand control commands to position the chair in the sit, recline, and stand

positions.

Leg Levelers: Manually rotate up or down in order to stabilize the chair before use (Fig. 3.2).

Figure 3.2 Leg Levelers

Scissor Mechanisms: Extend or retract to take the

chair through the various stages of recline (Fig. 3.3).

WARNING! Pinch/Crush Points

Hazard! Be aware that the lift

mechanism and scissor

mechanisms are a pinch point on

the lift chair. Keep the following

items and similar objects clear of

these points when operating the

lift chair:

 appendages

 small children

 pets

 wires

 oxygen tubes

 loose items, including but not

limited to clothing and blankets

 electrical power leads

Figure 3.3 Scissor Mechanism

ROTATE THE LEG LEVELERS TO RAISE OR LOWER THE CHAIR.

SCISSOR

MECHANISM

(PINCH POINT)

ELECTRICAL COMPONENTS

Your Pride Lift Chair is equipped with a low voltage DC electrical system that reduces the standard household

alternating current of 90V AC - 264V AC to direct current (24/39V DC). The electrical components include the

external transformer, batteries, and hand control. Keep these areas free from moisture at all times.

WARNING! Keep all electrical components free from moisture at all times to

prevent shock and/or electrical hazard.

External Transformer: Connects to a standard electrical outlet to provide power to the lift chair. The trans-

former may be equipped with an LED indicator, which shows green when power to the transformer is on.

The external transformer may also come equipped with mounting brackets that allow the transformer to be

mounted to the wall directly under the standard electrical outlet. The screws must be mounted to the wall stud

for security. Refer to “Appendix G” or “Appendix H” for a mounting diagram.

NOTE: Pride is not responsible for damage due to improper installation.

Lift Chair Series www.pridemobility.com 11

LIFT CHAIR SERIES

III. YOUR LIFT CHAIR

Batteries: Provide the power needed to return the lift chair from the recline position to the sit and/or lift

position in the event of a power failure. For those models equipped with a battery backup system, the batteries

are located inside the external transformer.

Hand Control: Contains the controls needed to operate the various functions of the lift chair. Refer to V.

“Operation” for more information. The hand control may be equipped with a quick-release connector, which

enables the user to detach the hand control from the chair, disabling all functions of the hand control.

12 www.pridemobility.com Lift Chair Series

LIFT CHAIR SERIES

KD

SLEEVE

KD CONNECTION

IV. ASSEMBLY/DISASSEMBLY

Your lift chair may require some assembly before initial use. It may also require disassembly to

make servicing the chair more convenient. If your lift chair is a Knock-Down (KD) model, follow

the instructions in “Lift Chair Set Up.” If your lift chair is not a KD model, proceed to “Lift Chair

Placement.”

LIFT CHAIR SET UP

KD models will arrive in the knock-down position (Fig. 4.1).

Figure 4.1 Knock-down (KD) Position

Follow these steps to assemble the lift chair:

4.1.1 Remove the packaging from the back portion

of the chair and check that the locking clip is in

the vertical position. Reposition if necessary.

4.1.2 Slide the left and right KD sleeves of the

chair-back onto the KD connections on the

arms and seat of the chair.

LOCKING CLIP

Lift Chair Series www.pridemobility.com 13

LIFT CHAIR SERIES

IV. ASSEMBLY/DISASSEMBLY

NOTE: Depending on chair width, you may need to slide on one side of the chair-back at a time. If this

is the case, level the chair-back before pressing down to lock into position.

4.1.3 Push firmly on the top of the chair-back to

lock into position. Listen for a click on each

side to ensure the chair-back is locked in

properly.

NOTE: Pull up on the chair-back to ensure that it

is locked in place. If the back can be pulled off,

then repeat steps 4.1.1 through 4.1.3.

4.1.4 For C6 Lift Chairs, tuck the fabric flaps on the

front of the chair-back and rear of the chair

base down into the frame and secure with the

reusable fastener on each flap. Then, zip the

two sections together.

“CLICK”

4.1.5

Connect the heat and massage harnesses to

the junction box. The junction box is mounted

to the back of the lift chair. Refer to “Appendix

D” for proper harness connections.

4.1.6 Attach the chair-back to the hook and loop

flaps on the bottom of the chair base.

HEAT CONNECTION TO JUNCTION BOX

JUNCTION BOX

MASSAGE UNIT

14 www.pridemobility.com Lift Chair Series

LIFT CHAIR SERIES

IV. ASSEMBLY/DISASSEMBLY

LIFT CHAIR PLACEMENT

Your lift chair should be placed near a standard electrical outlet on dry, level ground where there is ample

room to allow for proper operation. Pride recommends that you have the assistance of an attendant when

positioning the lift chair to avoid the possibility of injury when lifting.

Follow these steps to position the lift chair in a safe manner:

1. Place the back of the lift chair 76 cm (30 in.) from the nearest obstruction while the chair is in the seated

position. This measurement may vary depending on model.

2. Adjust the leg levelers to stabilize the lift chair (Fig. 3.2).

3. Install the batteries into the external transformer if applicable. Refer to “Battery Installation” for more

information.

4. Position the external transformer on the floor in an open, well-ventilated area where it will not be an

obstruction, or if equipped, utilize the optional wall mount.

5. Position the low voltage connection cable where it will not be pinched between the frame and the lift

mechanism.

6. Connect the low voltage connection cable to the external transformer if it is not already connected.

7. Plug the power lead directly into the electrical outlet. Do not use an extension lead!

NOTE: If you discover a problem at any point during the set up and positioning of your lift chair, stop

and contact your authorized Pride Provider immediately. To avoid personal injury and/or product

damage, do not plug the unit into the electrical outlet until the problem is corrected and do not

attempt to fix electrical problems by yourself.

EXTERNAL TRANSFORMER

BATTERY DOOR

POWER LEAD

Figure 4.2 Lift Chair Battery Backup Location

BATTERY INSTALLATION

Your lift chair may be equipped with a battery backup

system that will activate during a power failure. The

backup system is powered by two 9V batteries (not

included) that need to be installed into the external

transformer.

Follow these steps to install the batteries:

1. Unplug the external transformer power lead from

the electrical outlet.

2. Open the marked battery door on the external

transformer.

3. Install two 9V batteries into the external trans-

former (Fig. 4.2).

4. Replace the battery door.

NOTE: Always make sure the external transformer

is equipped with two fresh 9V batteries, since the

battery backup system does not recharge itself.

Fresh batteries are defined as 9V alkaline batteries

that are replaced every time the battery backup

system is activated during a power failure, or once

a year if the battery backup system has not been

activated.

NOTE: If you unplug your lift chair for an extended

period of time (more than one hour), remove the

batteries from the external transformer. The lift

chair will draw power from the batteries even

when it is not in use.

EXTERNAL TRANSFORMER

(BOTTOM VIEW)

POWER LEAD

Lift Chair Series www.pridemobility.com 15

LIFT CHAIR SERIES

LIFT CHAIR DISASSEMBLY

The back portion of KD Lift Chairs can be removed to make service and transport of the chair more convenient.

Follow these steps to disassemble the lift chair:

IV. ASSEMBLY/DISASSEMBLY

4.3.1 Remove the bottom of the back fabric from

the hook and loop flaps on the chair base.

NOTE: If equipped with a heat and massage

option, be sure to disconnect the heat and/or

massage harnesses from the junction box.

4.3.2 For C6 Lift Chairs, unzip the chair-back from

the chair base, then disengage the reusable

fastener securing the chair-back fabric to the

frame.

4.3.3 Using a large flathead screwdriver, lift the left

and right locking clips on the chair-back one

side at a time to raise the back from the con-

nections on the chair base. As you lift each

locking clip, pull up on the chair-back to lift

that side over the lock.

4.3.4 Lift the chair-back up and away from the

chair base.

16 www.pridemobility.com Lift Chair Series

LIFT CHAIR SERIES

IV. ASSEMBLY/DISASSEMBLY

FABRIC REMOVAL/INSTALLATION

The fabric on some lift chairs can be removed to make cleaning and service of the chair more convenient. If

your chair is equipped with removable fabric, please see below.

Follow these steps to remove and install the lift chair fabric:

4.4.1 Disconnect the hand control from the quick

release cable located in the lift chair side

pocket. Place the hand control in a safe loca-

tion out of the way.

4.4.2 Push the quick release cable through the “V”

cut hole in the side pocket of the lift chair.

4.4.3 Slide the left and right side arm covers off of

the metal side arms.

4.4.4 For C6 Lift Chairs, unzip the chaise pad from

the chair-back cover.

Lift Chair Series www.pridemobility.com 17

LIFT CHAIR SERIES

IV. ASSEMBLY/DISASSEMBLY

4.4.5 Loosen the front portion of the chaise pad

from the footrest and remove the chaise pad

from the lift chair.

4.4.6 Remove the footrest side covers.

NOTE: This feature does not apply to the C1 Lift

Chair.

4.4.7 Disengage the bottom flap of the chair-back

cover from the bottom seat rail.

4.4.8 Loosen the bottom chair-back cover flaps

from the bottom of the chair-back.

18 www.pridemobility.com Lift Chair Series

LIFT CHAIR SERIES

IV. ASSEMBLY/DISASSEMBLY

4.4.9 Remove the chair-back cover.

4.4.10 Loosen the seat box cover from the left and

right side of the seat box.

4.4.11 Remove the seat box cover.

NOTE: Follow the fabric removal steps in the

reverse order to install the fabric components to

the lift chair.

Lift Chair Series www.pridemobility.com 19

LIFT CHAIR SERIES

OPERATION PRECAUTIONS

There are certain precautions that should be taken during the operation of your lift chair. Read and

follow these precautions carefully in order to ensure safe lift chair operation and to prevent injury

and/or product damage.

 Plug the power lead directly into the electrical outlet. Do not use an extension lead!

 Do not place anything (for example, a drinking glass) on top of or near the external transformer.

 If the external transformer box or hand control requires cleaning, unplug the power lead from the electrical

outlet and use a clean, dry cloth or lightly dampened cloth. Allow ample drying time before plugging the

power lead back into the electrical outlet.

 Periodically check the hand control and all power leads for visible damage.

 Keep the hand control away from all heated surfaces.

 Ensure the hand control is out of the way before sitting in the chair.

 Keep children and pets away from all moving parts while operating the lift chair.

 Do not allow children to play on or operate the lift chair. Only the intended user should operate the lift

chair.

 Utilize the quick-disconnect feature on the standard hand control when the lift chair is not in use to prevent

unintended operation of the chair.

 Avoid pinch points, such as the lift and scissor mechanisms. Keep hands and feet clear of these areas.

 Always leave the lift chair in an upright and closed position when not in use.

 Do not sit or stand on the footrest.

 Do not “drop” into the lift chair when sitting if it is in a partially raised position.

PROHIBITED! Do not place objects under the lift chair. Make sure area is clear of

obstructions, including pets and small children during operation.

WARNING! Prevent the risk of electrical shock, fire, falls, and/or being pinched.

Follow all instructions and precautions provided.

HAND CONTROL OPERATION

Depending on lift chair model, the hand control may be equipped with switches that control the movement of

the chair-back, chair base, and footrest (Fig. 5.1, 5.2, and 5.3).

V. OPERATION

Figure 5.1 Standard Hand Control

UP

POSITION

DOWN

POSITION

LED

WARNING! Do not lean on or apply

downward force to the chair-back when

the lift chair is in the fully reclined

position. Doing so could cause the lift

chair to tip, resulting in personal injury

and/or product damage.

WARNING! Do not use the footrest as a

seat, or for purposes outside its

intended use. Doing so could cause

instability in the lift chair and place

undue stress on lift chair components,

resulting in personal injury and/or

product damage.

WARNING! Lock the hand control when not

in use.

NOTE: As an added safety measure, Pride recommends

that you utilize the quick disconnect to remove the hand

control from the lift chair and store the hand control out

of the reach of children when not in use.

20 www.pridemobility.com Lift Chair Series

LIFT CHAIR SERIES

V. OPERATION

Figure 5.2 Heat and Massage Hand Control

HEAT BUTTON

UP BUTTON

UNLOCK LED

LOCK/UNLOCK

BUTTON

LOCK LED

DOWN BUTTON

MASSAGE

SETTING

LEDS

MASSAGE

BUTTON

INTENSITY

BUTTON

INTENSITY

SETTING LEDS

Heat and Massage Hand Control Operation

Follow these steps to sit in your lift chair (Fig. 5.2):

1. Press and hold the UP button to raise your lift chair to the

standing position.

2. Back into the lift chair and sit in the center of the seat,

using the armrests for support if needed.

3. Press and hold the DOWN button to lower the lift chair

to a comfortable seated position.

Follow these steps to recline your lift chair from the

seated position (Fig. 5.2):

1. Press and hold the DOWN button until comfortably

reclined.

2. Press and hold the UP button to return to an upright,

seated position. Release the button when the lift chair

reaches a comfortable seated position.

Follow these steps to stand up from your lift chair (Fig. 5.2):

1. Press and hold the UP button to raise your lift chair.

2. Release the button when the lift chair reaches a height

where you can stand up comfortably.

Follow these steps to activate/deactivate the lock feature (Fig. 5.2):

1. Press and hold the LOCK button for approximately 3 seconds to lock the hand control. The red LED to

the right of the button will light up to indicate the hand control has been locked.

2. Press and hold the LOCK button for approximately 6 seconds to unlock the hand control. The green LED

to the left of the button will light up to indicate the hand control has been unlocked.

Follow these steps to operate the heat function (Fig. 5.2):

1. Press the HEAT button once to activate the heat function. The heat function will shut off automatically

after 20 minutes of continuous use.

2. Press the HEAT button again to turn off the heat function.

Standard Hand Control Operation

Follow these steps to sit in your lift chair (Fig. 5.1):

1. Engage and hold the up/down switch in the UP position to raise your lift chair to the standing position.

2. Back into the lift chair and sit in the center of the seat, using the armrests for support if needed.

3. Engage and hold the up/down switch in the DOWN position to lower the lift chair to a comfortable seated

position.

Follow these steps to recline your lift chair from the seated position (Fig. 5.1):

1. Engage and hold the up/down switch in the DOWN position until comfortably reclined.

2. Engage and hold the up/down switch in the UP position to return to an upright, seated position. Release

the switch when the lift chair reaches a comfortable seated position.

Follow these steps to stand up from your lift chair (Fig. 5.1):

1. Engage and hold the up/down switch in the UP position to raise your lift chair.

2. Release the switch when the lift chair reaches a height where you can stand up comfortably.

NOTE: The hand control on your lift chair may be equipped with an LED that indicates power to the

hand control. If this LED is present and not lit when the hand control is in use, contact your autho-

rized Pride Provider.

La page est en cours de chargement...

Pride C5 Le manuel du propriétaire

Pride C5 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents