Fujitsu M8000 Manuel utilisateur

SPARC Enterprise

M8000/M9000 Servers

Overview Guide

Part No.: 819-4204-15,

Manual Code: C120-E324-08EN

December 2010, Revision A

Please

Recycle

Oracle and/or its affiliates provided technical input and review on portions of this material.

Oracle and/or its affiliates and Fujitsu Limited each own or control intellectual property rights relating to products and technology described in this

document, and such products, technology and this document are protected by copyright laws, patents, and other intellectual property laws and

international treaties.

This document and the product and technology to which it pertains are distributed under licenses restricting their use, copying, distribution, and

decompilation. No part of such product or technology, or of this document, may be reproduced in any form by any means without prior written

authorization of Oracle and/or its affiliates and Fujitsu Limited, and their applicable licensors, if any. The furnishings of this document to you does not

give you any rights or licenses, express or implied, with respect to the product or technology to which it pertains, and this document does not contain or

represent any commitment of any kind on the part of Oracle or Fujitsu Limited, or any affiliate of either of them.

This document and the product and technology described in this document may incorporate third-party intellectual property copyrighted by and/or

licensed from the suppliers to Oracle and/or its affiliates and Fujitsu Limited, including software and font technology.

Per the terms of the GPL or LGPL, a copy of the source code governed by the GPL or LGPL, as applicable, is available upon request by the End User. Please

contact Oracle and/or its affiliates or Fujitsu Limited.

This distribution may include materials developed by third parties.

Parts of the product may be derived from Berkeley BSD systems, licensed from the University of California. UNIX is a registered trademark in the U.S. and

in other countries, exclusively licensed through X/Open Company, Ltd.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited.

All SPARC trademarks are used under license and are registered trademarks of SPARC International, Inc. in the U.S. and other countries. Products bearing

SPARC trademarks are based upon architectures developed by Oracle and/or its affiliates. SPARC64 is a trademark of SPARC International, Inc., used

under license by Fujitsu Microelectronics, Inc. and Fujitsu Limited. Other names may be trademarks of their respective owners.

United States Government Rights - Commercial use. U.S. Government users are subject to the standard government user license agreements of Oracle

and/or its affiliates and Fujitsu Limited and the applicable provisions of the FAR and its supplements.

Disclaimer: The only warranties granted by Oracle and Fujitsu Limited, and/or any affiliate of either of them in connection with this document or any

product or technology described herein are those expressly set forth in the license agreement pursuant to which the product or technology is provided.

EXCEPT AS EXPRESSLY SET FORTH IN SUCH AGREEMENT, ORACLE OR FUJITSU LIMITED, AND/OR THEIR AFFILIATES MAKE NO

REPRESENTATIONS OR WARRANTIES OF ANY KIND (EXPRESS OR IMPLIED) REGARDING SUCH PRODUCT OR TECHNOLOGY OR THIS

DOCUMENT, WHICH ARE ALL PROVIDED AS IS, AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,

INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-

INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. Unless

otherwise expressly set forth in such agreement, to the extent allowed by applicable law, in no event shall Oracle or Fujitsu Limited, and/or any of their

affiliates have any liability to any third party under any legal theory for any loss of revenues or profits, loss of use or data, or business interruptions, or for

any indirect, special, incidental or consequential damages, even if advised of the possibility of such damages.

DOCUMENTATION IS PROVIDED “AS IS” AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,

INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE

DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.

Oracle et/ou ses sociétés affiliées ont fourni et vérifié des données techniques de certaines parties de ce composant.

Oracle et/ou ses sociétés affiliées et Fujitsu Limited détiennent et contrôlent chacune des droits de propriété intellectuelle relatifs aux produits et

technologies décrits dans ce document. De même, ces produits, technologies et ce document sont protégés par des lois sur le copyright, des brevets,

d’autres lois sur la propriété intellectuelle et des traités internationaux.

Ce document, le produit et les technologies afférents sont exclusivement distribués avec des licences qui en restreignent l’utilisation, la copie, la

distribution et la décompilation. Aucune partie de ce produit, de ces technologies ou de ce document ne peut être reproduite sous quelque forme que ce

soit, par quelque moyen que ce soit, sans l’autorisation écrite préalable d’Oracle et/ou ses sociétés affiliées et de Fujitsu Limited, et de leurs éventuels

bailleurs de licence. Ce document, bien qu’il vous ait été fourni, ne vous confère aucun droit et aucune licence, expresses ou tacites, concernant le produit

ou la technologie auxquels il se rapporte. Par ailleurs, il ne contient ni ne représente aucun engagement, de quelque type que ce soit, de la part d’Oracle ou

de Fujitsu Limited, ou des sociétés affiliées de l’une ou l’autre entité.

Ce document, ainsi que les produits et technologies qu’il décrit, peuvent inclure des droits de propriété intellectuelle de parties tierces protégés par

copyright et/ou cédés sous licence par des fournisseurs à Oracle et/ou ses sociétés affiliées et Fujitsu Limited, y compris des logiciels et des technologies

relatives aux polices de caractères.

Conformément aux conditions de la licence GPL ou LGPL, une copie du code source régi par la licence GPL ou LGPL, selon le cas, est disponible sur

demande par l’Utilisateur final. Veuillez contacter Oracle et/ou ses sociétés affiliées ou Fujitsu Limited.

Cette distribution peut comprendre des composants développés par des parties tierces.

Des parties de ce produit peuvent être dérivées des systèmes Berkeley BSD, distribués sous licence par l’Université de Californie. UNIX est une marque

déposée aux États-Unis et dans d’autres pays, distribuée exclusivement sous licence par X/Open Company, Ltd.

Oracle et Java sont des marques déposées d’Oracle Corporation et/ou de ses sociétés affiliées. Fujitsu et le logo Fujitsu sont des marques déposées de

Fujitsu Limited.

Toutes les marques SPARC sont utilisées sous licence et sont des marques déposées de SPARC International, Inc., aux États-Unis et dans d’autres pays. Les

produits portant la marque SPARC reposent sur des architectures développées par Oracle et/ou ses sociétés affiliées. SPARC64 est une marque de SPARC

International, Inc., utilisée sous licence par Fujitsu Microelectronics, Inc. et Fujitsu Limited. Tout autre nom mentionné peut correspondre à des marques

appartenant à d’autres propriétaires.

United States Government Rights - Commercial use. U.S. Government users are subject to the standard government user license agreements of Oracle

and/or its affiliates and Fujitsu Limited and the applicable provisions of the FAR and its supplements.

Avis de non-responsabilité : les seules garanties octroyées par Oracle et Fujitsu Limited et/ou toute société affiliée de l’une ou l’autre entité en rapport avec

ce document ou tout produit ou toute technologie décrits dans les présentes correspondent aux garanties expressément stipulées dans le contrat de licence

régissant le produit ou la technologie fournis. SAUF MENTION CONTRAIRE EXPRESSÉMENT STIPULÉE DANS CE CONTRAT, ORACLE OU FUJITSU

LIMITED ET LES SOCIÉTÉS AFFILIÉES À L’UNE OU L’AUTRE ENTITÉ REJETTENT TOUTE REPRÉSENTATION OU TOUTE GARANTIE, QUELLE

QU’EN SOIT LA NATURE (EXPRESSE OU IMPLICITE) CONCERNANT CE PRODUIT, CETTE TECHNOLOGIE OU CE DOCUMENT, LESQUELS

SONT FOURNIS EN L’ÉTAT. EN OUTRE, TOUTES LES CONDITIONS, REPRÉSENTATIONS ET GARANTIES EXPRESSES OU TACITES, Y COMPRIS

NOTAMMENT TOUTE GARANTIE IMPLICITE RELATIVE À LA QUALITÉ MARCHANDE, À L’APTITUDE À UNE UTILISATION PARTICULIÈRE

OU À L’ABSENCE DE CONTREFAÇON, SONT EXCLUES, DANS LA MESURE AUTORISÉE PAR LA LOI APPLICABLE. Sauf mention contraire

expressément stipulée dans ce contrat, dans la mesure autorisée par la loi applicable, en aucun cas Oracle ou Fujitsu Limited et/ou l’une ou l’autre de leurs

sociétés affiliées ne sauraient être tenues responsables envers une quelconque partie tierce, sous quelque théorie juridique que ce soit, de tout manque à

gagner ou de perte de profit, de problèmes d’utilisation ou de perte de données, ou d’interruptions d’activités, ou de tout dommage indirect, spécial,

secondaire ou consécutif, même si ces entités ont été préalablement informées d’une telle éventualité.

LA DOCUMENTATION EST FOURNIE « EN L’ÉTAT » ET TOUTE AUTRE CONDITION, DÉCLARATION ET GARANTIE, EXPRESSE OU TACITE, EST

FORMELLEMENT EXCLUE, DANS LA MESURE AUTORISÉE PAR LA LOI EN VIGUEUR, Y COMPRIS NOTAMMENT TOUTE GARANTIE

IMPLICITE RELATIVE À LA QUALITÉ MARCHANDE, À L’APTITUDE À UNE UTILISATION PARTICULIÈRE OU À L’ABSENCE DE

CONTREFAÇON.

v

Contents

Preface ix

1. System Overview 1–1

1.1 Product Overview 1–1

1.2 System Specifications 1–8

1.2.1 Environmental Specifications 1–11

1.2.2 Power Specifications 1–12

1.2.3 M8000 Server Components 1–13

1.2.4 M9000 Server Components (Base Cabinet Only) 1–15

1.2.5 M9000 Server Components (With an Expansion Cabinet) 1–17

1.2.6 Operator Panel Overview 1–18

1.3 Server Components 1–21

1.3.1 CPU Module 1–21

1.3.2 CPU/Memory Board Unit 1–22

1.3.3 I/O Unit 1–22

1.3.4 FAN Unit 1–23

1.3.5 Power Supply Unit 1–23

1.3.6 Crossbar Unit 1–23

1.3.7 Clock Control Unit 1–23

1.3.8 Operator Panel 1–23

vi SPARC Enterprise M8000/M9000 Servers Overview Guide • December 2010

1.3.9 XSCF Unit 1–24

1.3.10 Internal Drive Units 1–24

1.4 Component Mounting Conditions 1–25

1.5 Optional Products 1–26

1.5.1 Power Supply Options 1–26

1.5.2 External I/O Expansion Unit 1–27

1.5.3 M9000 Server (Expansion Cabinet) Option 1–28

1.6 Software Features 1–28

2. System Features 2–1

2.1 Hardware Configuration 2–1

2.1.1 CPU 2–1

2.1.1.1 Mounted Processors and CPU Operational Modes 2–2

2.1.2 Memory Subsystem 2–5

2.1.3 I/O Subsystem 2–5

2.1.4 System Bus 2–5

2.1.5 System Control 2–7

2.2 Partitioning 2–7

2.2.1 Features 2–7

2.2.2 Domain Hardware Requirements 2–8

2.2.3 Domain Configuration 2–10

2.3 Resource Management 2–12

2.3.1 Dynamic Reconfiguration 2–12

2.3.2 PCI Hot-plug 2–13

2.3.3 Capacity on Demand 2–13

2.3.4 Oracle Solaris Zones 2–13

2.4 RAS 2–13

2.4.1 Reliability 2–14

2.4.2 Availability 2–14

Contents vii

2.4.3 Serviceability 2–15

3. About Software 3–1

3.1 Oracle Solaris OS Functions 3–1

3.1.1 Domain Management 3–2

3.1.2 PCI Hot-plug 3–2

3.2 XSCF Firmware Function 3–2

3.2.1 XSCF Features 3–2

3.2.1.1 Command Line-based User Interface (XSCF Shell) 3–3

3.2.1.2 Browser-Based User Interface (XSCF Web) 3–4

3.2.2 XSCF Functional Overview 3–4

3.2.2.1 System Management 3–4

3.2.2.2 Security Management 3–4

3.2.2.3 System Status Management 3–5

3.2.2.4 Error Detection and Management 3–5

3.2.2.5 Remote System Control and Monitoring 3–5

3.2.2.6 Resource Management 3–5

3.2.2.7 Airflow Indicator 3–6

Index Index–1

viii SPARC Enterprise M8000/M9000 Servers Overview Guide • December 2010

ix

Preface

This overview guide describes system features, system configurations, hardware

functions, and software functions of the SPARC Enterprise M8000/M9000 servers

from Oracle and Fujitsu. References herein to the M8000 server or M9000 server are

references to the SPARC Enterprise M8000 or SPARC Enterprise M9000 server.

This section explains:

■ “SPARC Enterprise M8000/M9000 Servers Documentation” on page ix

■ “Text Conventions” on page xi

■ “Notes on Safety” on page xi

■ “Documentation Feedback” on page xii

SPARC Enterprise M8000/M9000

Servers Documentation

For the web location of all SPARC Enterprise M8000/M9000 servers documents,

refer to the SPARC Enterprise M8000/M9000 Servers Getting Started Guide packaged

with your server.

Product notes are available on the website only. Please check for the most recent

update for your product.

Note – For Sun Oracle software-related manuals (Oracle Solaris OS, and so on), go

to: http://docs.sun.com

x SPARC Enterprise M8000/M9000 Servers Overview Guide • December 2010

Book Titles Sun/Oracle Fujitsu

SPARC Enterprise M8000/M9000 Servers Site Planning Guide 819-4203 C120-H014

SPARC Enterprise M8000/M9000 Servers Getting Started Guide

*

* This is a printed document.

821-3049 C120-E323

SPARC Enterprise M8000/M9000 Servers Overview Guide 819-4204 C120-E324

SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Important

Legal and Safety Information

*

821-2098 C120-E633

SPARC Enterprise M8000/M9000 Servers Safety and Compliance Guide 819-4201 C120-E326

External I/O Expansion Unit Safety and Compliance Guide 819-1143 C120-E457

SPARC Enterprise M8000/M9000 Servers Unpacking Guide

*

821-3047 C120-E327

SPARC Enterprise M8000/M9000 Servers Installation Guide 819-4200 C120-E328

SPARC Enterprise M8000/M9000 Servers Service Manual 819-4202 C120-E330

External I/O Expansion Unit Installation and Service Manual 819-1141 C120-E329

SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers

Administration Guide

821-2794 C120-E331

SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF

User’s Guide

821-2797 C120-E332

SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF

Reference Manual

Varies per

release

Varies per

release

SPARC Enterprise M4000/M5000/M8000/M9000 Servers Dynamic

Reconfiguration (DR) User’s Guide

821-2796 C120-E335

SPARC Enterprise M4000/M5000/M8000/M9000 Servers Capacity on

Demand (COD) User’s Guide

821-2795 C120-E336

SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Product

Notes

†

† Beginning with the XCP1100 release.

Varies per

release

Varies per

release

SPARC Enterprise M8000/M9000 Servers Product Notes Varies per

release

Varies per

release

External I/O Expansion Unit Product Notes 819-5324 C120-E456

SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Glossary 821-2800 C120-E514

Preface xi

Text Conventions

This manual uses the following fonts and symbols to express specific types of

information.

Notes on Safety

Read the following documents thoroughly before using or handling any SPARC

Enterprise M8000/M9000 server.

■ SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Important Legal and

Safety Information

■ SPARC Enterprise M8000/M9000 Servers Safety and Compliance Guide

Fonts/symbols Meaning Example

AaBbCc123 What you type, when contrasted

with on-screen computer output.

This font represents the example of

command input in the frame.

XSCF> adduser jsmith

AaBbCc123 The names of commands, files, and

directories; on-screen computer

output.

This font represents the example of

command input in the frame.

XSCF> showuser -P

User Name: jsmith

Privileges: useradm

auditadm

Italic Indicates the name of a reference

manual

See the SPARC Enterprise

M3000/M4000/M5000/M8000/M90

00 Servers XSCF User’s Guide.

" " Indicates names of chapters,

sections, items, buttons, or menus

See Chapter 2, "System Features."

xii SPARC Enterprise M8000/M9000 Servers Overview Guide • December 2010

Documentation Feedback

If you have any comments or requests regarding this document, go to the following

web sites.

■ For Oracle users:

http://docs.sun.com

■ For Fujitsu users in U.S.A., Canada, and Mexico:

http://www.computers.us.fujitsu.com/www/support_servers.shtml?s

upport/servers

■ For Fujitsu users in other countries, refer to this SPARC Enterprise contact:

http://www.fujitsu.com/global/contact/computing/sparce_index.html

1-1

CHAPTER

1

System Overview

This chapter provides an overview of features, specifications, and configurations of

the SPARC Enterprise M8000/M9000 servers.

■ Section 1.1, “Product Overview” on page 1-1

■ Section 1.2, “System Specifications” on page 1-8

■ Section 1.3, “Server Components” on page 1-21

■ Section 1.4, “Component Mounting Conditions” on page 1-25

■ Section 1.5, “Optional Products” on page 1-26

■ Section 1.6, “Software Features” on page 1-28

1.1 Product Overview

This section describes the features and appearances of M8000/M9000 servers.

M8000/M9000 servers have been developed as UNIX servers using a symmetric

multi-processing (SMP) architecture. Each of these systems merges mainframe

technologies for high reliability, and the associated know-how accumulated over

time, with the high-speed technologies of super computers and the openness of

UNIX server development.

If a problem occurs during operation, the errors causing them can be corrected or

isolated without stopping the system. This feature minimizes problems in many

cases, thereby improving job continuity.

Each of the M8000/M9000 servers contains one or more multicore SPARC64 VI,

SPARC64 VII, and SPARC64 VII+ processors. They can operate as multiple servers

that permit flexible use of resources, including more efficient execution of job

operations. In the M8000/M9000 servers, the SPARC64 VI, SPARC64 VII, and

SPARC64 VII+ processors can be mounted in combination.

1-2 SPARC Enterprise M8000/M9000 Servers Overview Guide • December 2010

Each server consists of a cabinet containing various mounted components, a front

door, rear door, and side panels as parts of the server structure. An operator panel is

mounted on the front door and is always accessible. Take special care in handling

and storing the dedicated key that is provided for the front door and the operator

panel.

FIGURE 1-1 through FIGURE 1-3 show exterior views of the servers.

M8000 Server Appearance

FIGURE 1-1 M8000 Server (Front View)

RFID tag

Operator panel

Chapter 1 System Overview 1-3

M9000 Server Appearance (Base Cabinet Only)

FIGURE 1-2 M9000 Server (Base Cabinet Only)

RFID tag

Operator panel

1-4 SPARC Enterprise M8000/M9000 Servers Overview Guide • December 2010

M9000 Server Appearance (With an Expansion Cabinet)

The expansion cabinet is an M9000 option connected to the M9000 (type for the base

cabinet only).

FIGURE 1-3 M9000 Server (With an Expansion Cabinet)

RFID tag Operator panel

Chapter 1 System Overview 1-5

M8000/M9000 servers have the following features:

■ Multicore SPARC64 VI/SPARC64 VII/SPARC64 VII+ gigahertz processors

These processors provide superior performance, due to their high scalability

allowing expansion to up to 64 dual-core CPU modules, and technologies

enabling high-speed arithmetic operations and data transfers.

Reliability and availability are enhanced with Error Checking and Correction

(ECC) data protection and instruction retry.

As faster and higher-performing CPU modules become available, they can be

added to or replace existing installed CPU modules to further improve

performance.

The system uses symmetric multiple-processing (SMP), so each CPU can access

any part of system memory regardless of its mounting location. Adding more

CPUs does not affect memory access to any of the installed CPUs.

■ High-speed crossbar-type system bus

The high-speed crossbar-type system bus that provides high-speed wide-band

data transfer maximizes the performance of the SPARC64 VI/SPARC64

VII/SPARC64 VII+ processors.

■ ECC memory

ECC functionality protects data on all system buses and in memory, so that any

errors in data are automatically corrected. In addition to ECC memory, Chipkill

memory protection is supported.

■ PCI Express (PCIe) is mounted as I/O buses

PCIe, with a maximum bus width of eight lanes is used for the inter-connect bus

with the I/O device.

■ An optional External I/O Expansion Unit enables I/O slot expansion in the

system.

Connect an External I/O Expansion Unit to add more PCIe and PCI-X slots to the

server.

An External I/O Expansion Unit is connected by a cable to a link card plugged

into a PCIe slot in an I/O unit.

■ The main components, power supply units, and FAN units can be configured to

be redundant

Redundant configurations can be used for the main components, such as a power

supply unit, FAN unit, hard disk drive, and PCI card. Implementation of

redundant configurations enables operation to continue without interruption

even if one of the units making up part of the system fails.

1-6 SPARC Enterprise M8000/M9000 Servers Overview Guide • December 2010

■ The main components, power supply units, and FAN units support active (hot)

replacement/addition

Component replacement and addition during system operation supported for the

main components, such as a power supply unit, FAN unit, hard disk drive,

system control facility (board), system board, and PCI card, with some exceptions.

Dynamic reconfiguration (DR) is used for active replacement and addition of

CPU/memory board unit and I/O unit configuring the system board.

PCI hot-plug function enables replacement and addition of PCI cards while the

system is running.

■ Automatic reboot on failure

If a failure occurs, the faulty component is automatically isolated from the system,

and the system is rebooted. If 1-bit errors occur frequently in the cache memory

configuring a CPU, the faulty memory can be dynamically isolated without

rebooting the Oracle Solaris Operating System (Oracle Solaris OS). This type of

graceful degradation function enables the operation of the other resources to

continue without interruption, and also provides high fault-tolerance in case of

failure.

■ Uninterruptible Power Supply (UPS) controller

For measures against commercial power failure, the server is equipped with UPS

controller (UPC) ports. Using a UPS enables stable power supply to the system

when a power failure or an extensive power interruption occurs.

■ eXtended System Control Facility (XSCF)

This product has a built-in service processor (called the eXtended System Control

Facility (XSCF)), which monitors the system temperature, the hardware status of

the power supply unit and FAN unit, and the operating status of domains.

You can configure the system to selectively degrade a faulty component for

operation if supply failure is detected.

Scheduling is supported to enable automatic power-on and power-off of the

server according to the specified operation schedule.

The console of each domain can be controlled from the XSCF via a network.

A browser-based user interface (BUI) and the command line-based interface

facilitate operations for making configuration changes and status monitoring in

the system.

Note – A console display terminal is required for console control. Prepare it before

installation. The devices that can be used as the terminal are listed below.

■ PC

■ Workstation

■ ASCII terminal

Chapter 1 System Overview 1-7

■ Terminal server (or a touch panel connected to a terminal server)

Note – For the console connection method, see the SPARC Enterprise M8000/M9000

Servers Installation Guide.

■ Partitioning function

One high-end server can be divided into multiple areas, or domains, for more

effective scalability. Each domain manages resources in linkage with the XSCF. A

domain may consist of optimized resources depending on its intended use,

enabling more efficient system configurations.

Dynamic Reconfiguration (DR) enables adding, deleting, and relocating resources

of domains without stopping processing in the domain. This enables dynamic

reconfiguration of resources without stopping a job, even when the job load

increases suddenly or when a faulty component is replaced.

For details on domain functions, see the SPARC Enterprise

M3000/M4000/M5000/M8000/M9000 Servers Administration Guide.

For details of the DR function, see the SPARC Enterprise

M4000/M5000/M8000/M9000 Servers Dynamic Reconfiguration (DR) User’s Guide.

■ The Oracle Solaris OS (Oracle Solaris 10 or later) is supported.

With an added function for error prediction and self-recovery by the system

(Predictive Self-Healing) and enhanced process privilege management and

network functions, the Oracle Solaris OS sets new standards for performance,

efficiency, availability, and security.

■ Capacity on Demand (COD)

The Capacity on Demand (COD) feature allows you to configure spare processing

resources on your server in the form of one or more COD CPUs which can be

activated at a later date when additional processing power is needed.

For details, see the SPARC

SPARC Enterprise M4000/M5000/M8000/M9000 Servers

Capacity on Demand (COD) User’s Guide

.

1-8 SPARC Enterprise M8000/M9000 Servers Overview Guide • December 2010

1.2 System Specifications

This section describes the specifications and the environmental conditions of both

high-end servers, shows names of server components, and provides an overview of

the operator panel.

Note – Contact your sales representative for tape drive unit options on

M8000/M9000 servers.

TABLE 1-1 Main Unit Specifications

Item M8000 Server

M9000 Server

Base Cabinet Only

Base Cabinet + Expansion

Cabinet

Type Floor-stand type

**

CPU Type SPARC64 VI: 2 cores/1 CPU modules

SPARC64 VI compatible mode

Number of

CPUs

32 cores (maximum 16

CPU modules)

64 cores (maximum 32

CPU modules)

128 cores (maximum 64

CPU modules)

Type SPARC64 VII/SPARC64 VII+: 4 cores/1 CPU modules

SPARC64 VI compatible mode/SPARC64 VII enhanced mode

Number of

CPUs

64 cores (maximum 16

CPU modules)

128 cores (maximum 32

CPU modules)

256 cores (maximum 64

CPU modules)

Main storage

(memory

module)

Maximum

memory size

1TB

††

2TB

††

4TB

††

Error

checking

function

Error Checking and Correction (ECC)

PCI slot built into servers

(PCI Express)

*

Maximum 32 slots Maximum 64 slots Maximum 128 slots

External I/O Expansion Unit

(maximum number of

connections)

8 units (16 boats) 16 units (32 boats) 16 units (32 boats)

Maximum number of slots,

with I/O boats mounted

112 slots 224 slots 288 slots

Hard disk drive

†

16 slots 32 slots 64 slots

CD-RW/DVD-RW drive unit 1 drive 2 drives

La page charge ...

Fujitsu M8000 Manuel utilisateur

Ce manuel convient également à

Fujitsu M8000 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents