Fujitsu Server M4000/M5000 Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

SPARC
®
Enterprise
M4000/M5000 Servers
Product Notes
For XCP version 1060
Order No. U41759-J-Z816-1-76
Part No. 820-3790-10
November 2007, Revision A
Please
Recycle
Copyright 2007 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. and FUJITSU LIMITED, 1-1, Kamikodanaka
4-chome, Nakahara-ku, Kawasaki-shi, Kanagawa-ken 211-8588, Japan. All rights reserved.
Sun Microsystems, Inc. and Fujitsu Limited each own or control intellectual property rights relating to products and technology described in
this document, and such products, technology and this document are protected by copyright laws, patents and other intellectual property laws
and international treaties. The intellectual property rights of Sun Microsystems, Inc. and Fujitsu Limited in such products, technology and this
document include, without limitation, one or more of the United States patents listed at http://www.sun.com/patents and one or more
additional patents or patent applications in the United States or other countries.
This document and the product and technology to which it pertains are distributed under licenses restricting their use, copying, distribution,
and decompilation. No part of such product or technology, or of this document, may be reproduced in any form by any means without prior
written authorization of Fujitsu Limited and Sun Microsystems, Inc., and their applicable licensors, if any. The furnishing of this document to
you does not give you any rights or licenses, express or implied, with respect to the product or technology to which it pertains, and this
document does not contain or represent any commitment of any kind on the part of Fujitsu Limited or Sun Microsystems, Inc., or any affiliate of
either of them.
This document and the product and technology described in this document may incorporate third-party intellectual property copyrighted by
and/or licensed from suppliers to Fujitsu Limited and/or Sun Microsystems, Inc., including software and font technology.
Per the terms of the GPL or LGPL, a copy of the source code governed by the GPL or LGPL, as applicable, is available upon request by the End
User. Please contact Fujitsu Limited or Sun Microsystems, Inc.
This distribution may include materials developed by third parties.
Parts of the product may be derived from Berkeley BSD systems, licensed from the University of California. UNIX is a registered trademark
in the U.S. and in other countries, exclusively licensed through X/Open Company, Ltd.
Sun, Sun Microsystems, the Sun logo, Java, Netra, Solaris, Sun Ray, Answerbook2, docs.sun.com, OpenBoot, and Sun Fire are trademarks or
registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.
Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited.
All SPARC trademarks are used under license and are registered trademarks of SPARC International, Inc. in the U.S. and other countries.
Products bearing SPARC trademarks are based upon architecture developed by Sun Microsystems, Inc.
SPARC64 is a trademark of SPARC International, Inc., used under license by Fujitsu Microelectronics, Inc. and Fujitsu Limited.
The OPEN LOOK and Sun™ Graphical User Interface was developed by Sun Microsystems, Inc. for its users and licensees. Sun acknowledges
the pioneering efforts of Xerox in researching and developing the concept of visual or graphical user interfaces for the computer industry. Sun
holds a non-exclusive license from Xerox to the Xerox Graphical User Interface, which license also covers Sun’s licensees who implement OPEN
LOOK GUIs and otherwise comply with Sun’s written license agreements.
United States Government Rights - Commercial use. U.S. Government users are subject to the standard government user license agreements of
Sun Microsystems, Inc. and Fujitsu Limited and the applicable provisions of the FAR and its supplements.
Disclaimer: The only warranties granted by Fujitsu Limited, Sun Microsystems, Inc. or any affiliate of either of them in connection with this
document or any product or technology described herein are those expressly set forth in the license agreement pursuant to which the product
or technology is provided. EXCEPT AS EXPRESSLY SET FORTH IN SUCH AGREEMENT, FUJITSU LIMITED, SUN MICROSYSTEMS, INC.
AND THEIR AFFILIATES MAKE NO REPRESENTATIONS OR WARRANTIES OF ANY KIND (EXPRESS OR IMPLIED) REGARDING SUCH
PRODUCT OR TECHNOLOGY OR THIS DOCUMENT, WHICH ARE ALL PROVIDED AS IS, AND ALL EXPRESS OR IMPLIED
CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE
EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. Unless otherwise expressly set forth in such agreement, to the
extent allowed by applicable law, in no event shall Fujitsu Limited, Sun Microsystems, Inc. or any of their affiliates have any liability to any
third party under any legal theory for any loss of revenues or profits, loss of use or data, or business interruptions, or for any indirect, special,
incidental or consequential damages, even if advised of the possibility of such damages.
DOCUMENTATION IS PROVIDED “AS IS” AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT,
ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.
Copyright 2007 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. et FUJITSU LIMITED, 1-1, Kamikodanaka
4-chome, Nakahara-ku, Kawasaki-shi, Kanagawa-ken 211-8588, Japon. Tous droits réservés.
Entrée et revue tecnical fournies par Fujitsu Limited sur des parties de ce matériel.
Sun Microsystems, Inc. et Fujitsu Limited détiennent et contrôlent toutes deux des droits de propriété intellectuelle relatifs aux produits et
technologies décrits dans ce document. De même, ces produits, technologies et ce document sont protégés par des lois sur le copyright, des
brevets, d’autres lois sur la propriété intellectuelle et des traités internationaux. Les droits de propriété intellectuelle de Sun Microsystems, Inc.
et Fujitsu Limited concernant ces produits, ces technologies et ce document comprennent, sans que cette liste soit exhaustive, un ou plusieurs
des brevets déposés aux États-Unis et indiqués à l’adresse http://www.sun.com/patents de même qu’un ou plusieurs brevets ou applications
brevetées supplémentaires aux États-Unis et dans d’autres pays.
Ce document, le produit et les technologies afférents sont exclusivement distribués avec des licences qui en restreignent l’utilisation, la copie,
la distribution et la décompilation. Aucune partie de ce produit, de ces technologies ou de ce document ne peut être reproduite sous quelque
forme que ce soit, par quelque moyen que ce soit, sans l’autorisation écrite préalable de Fujitsu Limited et de Sun Microsystems, Inc., et de leurs
éventuels bailleurs de licence. Ce document, bien qu’il vous ait été fourni, ne vous confère aucun droit et aucune licence, expresses ou tacites,
concernant le produit ou la technologie auxquels il se rapporte. Par ailleurs, il ne contient ni ne représente aucun engagement, de quelque type
que ce soit, de la part de Fujitsu Limited ou de Sun Microsystems, Inc., ou des sociétés affiliées.
Ce document, et le produit et les technologies qu’il décrit, peuvent inclure des droits de propriété intellectuelle de parties tierces protégés par
copyright et/ou cédés sous licence par des fournisseurs à Fujitsu Limited et/ou Sun Microsystems, Inc., y compris des logiciels et des
technologies relatives aux polices de caractères.
Par limites du GPL ou du LGPL, une copie du code source régi par le GPL ou LGPL, comme applicable, est sur demande vers la fin utilsateur
disponible; veuillez contacter Fujitsu Limted ou Sun Microsystems, Inc.
Cette distribution peut comprendre des composants développés par des tierces parties.
Des parties de ce produit pourront être dérivées des systèmes Berkeley BSD licenciés par l’Université de Californie. UNIX est une marque
déposée aux Etats-Unis et dans d’autres pays et licenciée exclusivement par X/Open Company, Ltd.
Sun, Sun Microsystems, le logo Sun, Java, Netra, Solaris, Sun Ray, Answerbook2, docs.sun.com, OpenBoot, et Sun Fire sont des marques de
fabrique ou des marques déposées de Sun Microsystems, Inc. aux Etats-Unis et dans d’autres pays.
Fujitsu et le logo Fujitsu sont des marques déposées de Fujitsu Limited.
Toutes les marques SPARC sont utilisées sous licence et sont des marques de fabrique ou des marques déposées de SPARC International, Inc.
aux Etats-Unis et dans d’autres pays. Les produits portant les marques SPARC sont basés sur une architecture développée par Sun
Microsystems, Inc.
SPARC64 est une marques déposée de SPARC International, Inc., utilisée sous le permis par Fujitsu Microelectronics, Inc. et Fujitsu Limited.
L’interface d’utilisation graphique OPEN LOOK et Sun™ a été développée par Sun Microsystems, Inc. pour ses utilisateurs et licenciés. Sun
reconnaît les efforts de pionniers de Xerox pour la recherche et le développement du concept des interfaces d’utilisation visuelle ou graphique
pour l’industrie de l’informatique. Sun détient une license non exclusive de Xerox sur l’interface d’utilisation graphique Xerox, cette licence
couvrant également les licenciés de Sun qui mettent en place l’interface d’utilisation graphique OPEN LOOK et qui, en outre, se conforment
aux licences écrites de Sun.
Droits du gouvernement américain - logiciel commercial. Les utilisateurs du gouvernement américain sont soumis aux contrats de licence
standard de Sun Microsystems, Inc. et de Fujitsu Limited ainsi qu’aux clauses applicables stipulées dans le FAR et ses suppléments.
Avis de non-responsabilité: les seules garanties octroyées par Fujitsu Limited, Sun Microsystems, Inc. ou toute société affiliée de l’une ou l’autre
entité en rapport avec ce document ou tout produit ou toute technologie décrit(e) dans les présentes correspondent aux garanties expressément
stipulées dans le contrat de licence régissant le produit ou la technologie fourni(e). SAUF MENTION CONTRAIRE EXPRESSÉMENT
STIPULÉE DANS CE CONTRAT, FUJITSU LIMITED, SUN MICROSYSTEMS, INC. ET LES SOCIÉTÉS AFFILIÉES REJETTENT TOUTE
REPRÉSENTATION OU TOUTE GARANTIE, QUELLE QU’EN SOIT LA NATURE (EXPRESSE OU IMPLICITE) CONCERNANT CE
PRODUIT, CETTE TECHNOLOGIE OU CE DOCUMENT, LESQUELS SONT FOURNIS EN L’ÉTAT. EN OUTRE, TOUTES LES CONDITIONS,
REPRÉSENTATIONS ET GARANTIES EXPRESSES OU TACITES, Y COMPRIS NOTAMMENT TOUTE GARANTIE IMPLICITE RELATIVE À
LA QUALITÉ MARCHANDE, À L’APTITUDE À UNE UTILISATION PARTICULIÈRE OU À L’ABSENCE DE CONTREFAÇON, SONT
EXCLUES, DANS LA MESURE AUTORISÉE PAR LA LOI APPLICABLE. Sauf mention contraire expressément stipulée dans ce contrat, dans
la mesure autorisée par la loi applicable, en aucun cas Fujitsu Limited, Sun Microsystems, Inc. ou l’une de leurs filiales ne sauraient être tenues
responsables envers une quelconque partie tierce, sous quelque théorie juridique que ce soit, de tout manque à gagner ou de perte de profit,
de problèmes d’utilisation ou de perte de données, ou d’interruptions d’activités, ou de tout dommage indirect, spécial, secondaire ou
consécutif, même si ces entités ont été préalablement informées d’une telle éventualité.
LA DOCUMENTATION EST FOURNIE “EN LETAT” ET TOUTES AUTRES CONDITIONS, DECLARATIONS ET GARANTIES EXPRESSES
OU TACITES SONT FORMELLEMENT EXCLUES, DANS LA MESURE AUTORISEE PAR LA LOI APPLICABLE, Y COMPRIS NOTAMMENT
TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE, A L’APTITUDE A UNE UTILISATION PARTICULIERE OU A
L’ABSENCE DE CONTREFACON.
v
Contents
Preface vii
Technical Support vii
Software Resources vii
Accessing Documentation viii
Fujitsu Siemens Computers Welcomes Your Comments viii
SPARC Enterprise M4000/M5000 Servers Product Notes 1
Supported Versions of Firmware and Software 1
Patch Information 2
Known Issues 4
General Functionality Issues and Limitations 4
Notes for XCP 1050 or Later 5
Notes for XSCF Web 5
Hardware Installation and Service Issues 6
Specific Issues and Workarounds 6
Cautions for mounting the server in the 19-inch rack 7
Hardware Documentation Updates 9
Electrical Specifications 11
Cable Connections 12
Updates of the SPARC Enterprise M4000/M5000 Servers Service Manual 13
vi SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1060 November 2007
Installing the PCI Cassette 13
DIMM Replacement 14
Software Issues 15
XCP Issues and Workarounds 15
Solaris Issues and Workarounds 19
Identifying Permanent Memory in a Target Board 30
Preparing to Upgrade to XCP 1050 or later 30
Software Documentation Updates 34
vii
Preface
These product notes contain late-breaking information about the SPARC
®
Enterprise
M4000/M5000 server hardware, software, or documentation that became known
after the documentation set was published.
Technical Support
If you have technical questions or issues that are not addressed in the SPARC
Enterprise M4000/M5000 servers documentation, contact a sales representative or a
certified service engineer.
Software Resources
The Solaris™ Operating System and Sun Java™ Enterprise System software are
preinstalled on your SPARC Enterprise M4000/M5000 servers.
Contact a sales representative or a certified service engineer for software resources
for your SPARC Enterprise M4000/M5000 servers.
Note – For latest patch information go to:
http://support.fujitsu-siemens.com
Installation information and README files are included in the patch download.
viii SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1060 November 2007
Accessing Documentation
Instructions for installing, administering, and using your SPARC Enterprise
M4000/M5000 servers are provided in the SPARC Enterprise M4000/M5000 servers
documentation set.
The documentation set is available for download from the following website:
http://manuals.fujitsu-siemens.com/
Note – Information in these product notes supersedes the information in the SPARC
Enterprise M4000/M5000 servers documentation set.
Solaris documentation is available at:
http://www.sun.com/documentation
Fujitsu Siemens Computers Welcomes
Your Comments
If you have any comments or requests regarding this manual, or if you find any
unclear statements in the manual, please state your points specifically, and forward
it to a sales representative or a certified service engineer.
Please include the title and part number of your document with your feedback.
1
SPARC Enterprise M4000/M5000
Servers Product Notes
These product notes contain late-breaking information about the SPARC
®
Enterprise
M4000/M5000 server hardware, software, or documentation that became known
after the documentation set was published.
Supported Versions of Firmware and Software
Patch Information
Known Issues
Notes for XCP 1050 or Later
Notes for XSCF Web
Hardware Installation and Service Issues
Hardware Documentation Updates
Software Issues
Software Documentation Updates
Supported Versions of Firmware and
Software
The following firmware and software versions are supported in this release:
XSCF Control Package (XCP) 1060 or later
You can download the latest files of firmware at the following websites.
Global Site:
http://www.fujitsu.com/sparcenterprise/firmware/
2 SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1060 November 2007
Japanese Site:
http://primeserver.fujitsu.com/sparcenterprise/download/firmwa
re/
Note – When the XCP version preinstalled in your server is under XCP 1060, you
must upgrade to XSCF Control Package(XCP) 1060 or later. Use the web browser
interface, also known as the browser user interface (BUI), to import XCP firmware
and then execute the flashupdate(8) command to upgrade the XCP firmware with
the XSCF Shell.
Caution – CR ID #6534471: Improper handling of large page in kernel memory may
cause random panics. Implement the workaround for CR ID #6534471 or check for
the availability of a patch and install it immediately. This bug has been fixed by
125100-06 and Solaris 10 8/07.
The first version of the Solaris™ Operating System (OS) to support these servers
is the Solaris 10 11/06 OS.
Note – It is required that all SPARC Enterprise M4000/M5000 servers be upgraded
to XCP 1050 or later in order to support adding future COD Right To Use (RTU)
licenses. Contact your local Service Representative for assistance.
Patch Information
This section lists mandatory patches for the SPARC Enterprise M4000/M5000
servers.
These patches are not required for servers running Solaris 10 8/07 OS.
118833-36 (Install 118833-36 before 125100-04.)
125100-04 or later
120068-03 or later
123839-07 or later
125424-01 or later
125075-01 or later
125670-02 or later
SPARC Enterprise M4000/M5000 Servers Product Notes 3
Note – See “Software Resources” on page vii for information on how to find the
latest patches. Installation information and README files are included in the patch
download.
4 SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1060 November 2007
Known Issues
This section describes known issues in this release.
General Functionality Issues and Limitations
Caution – For dynamic reconfiguration (DR) and hot-plug issues, see TABLE 7.
Domains using the ZFS file system can not use Dynamic Reconfiguration.
SPARC Enterprise M4000/M5000 servers are cold service machines. Hot-
swapping of the CPU/Memory board unit (CMU), I/O Unit (IOU), or any
eXtended System Control Facility (XSCF) unit is not supported.
For this XCP release, the XSCF web browser interface, also known as the browser
user interface (BUI) does not support the External I/O Expansion Unit Manager
feature.
The XSCF web browser interface, also known as the browser user interface (BUI),
supports new feature concerning the COD configuration.
The XSCF does not support the Log Archiving feature.
When using XSCF as the NTP server of the domain, configure it so as not to block
the ICMP protocol of the DNS server and the NTP server which the XSCF refers
to.
When you use the external power control interface (EPC) of the external power
controller, the following notification signals are not supported;
the OS panic or the server hardware error signal (*CPUN/RTNU)
the server hardware error signal (power fail, temperature error, and fan error)
(*ALARM)
For 1027A-Z/X1027A-Z, PCIe Dual 10 Gigabit Ethernet Fiber XFP cards, these
limits apply:
Do not use more than two cards in an External I/O Expansion Unit.
Do not use these cards in an External I/O Expansion Unit.
For 4447A-Z/X4447A-Z, PCIe Quad-port Gigabit Ethernet Adapter UTP cards,
these maximum limits apply:
No more than two cards per I/O boat
No more than four cards in a SPARC Enterprise M4000 server
No more than eight cards in a SPARC Enterprise M5000 server
SPARC Enterprise M4000/M5000 Servers Product Notes 5
To complete updating the OpenBoot PROM firmware in the target domain, be
sure to power off/on the domain.
In case that Solaris OS is a single user mode, if you switch from the domain 
console to the XSCF Shell, Solaris OS might be started up to multi-user mode. 
When you operate the single user mode for Solaris OS, don't switch from the 
domain console to the XSCF Shell.
We recommend the domain to use the XSCF Unit as NTP server. In this case,
needs the following attention.
XSCF must be connected to an external NTP server
When you connect one or more NTP servers in addition to XSCF, connect the
same NTP server as XSCF is using
For details on NTP server, contact your technical support. For details on NTP
settings, refer to the SPARC Enterprise M4000/M5000/M8000/M9000 servers XSCF
User's Guide.
Notes for XCP 1050 or Later
You cannot use the following user account names, as they are reserved for system
use: root, bin, daemon, adm, operator, nobody, sshd, rpc, rpcuser, ldap, apache, ntp,
admin, and default.
Notes for XSCF Web
Using the XSCF Web, when you import XCP or update the firmware, Session ID
error may be displayed on the web browser. And in the Autologout setting, when
you specify the timeout period as over 30 minutes, Internal Server Error may be
displayed when you perform the firmware update.
When you use the XSCF Web, if a plug-in such as the search tool installed with
the browser, remove the plug-in or disable the pop-up blocking.
6 SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1060 November 2007
Hardware Installation and Service Issues
This section describes hardware specific issues and workarounds.
Specific Issues and Workarounds
TABLE 1 lists known hardware issues and possible workarounds.
TABLE 1 Hardware Issues and Workarounds
CR ID Description Workaround
6433420 The domain console might display a Mailbox
timeout or IOCB interrupt timeout error during
boot.
Issue a reset -all command from the
OpenBoot PROM (OK) prompt and reboot.
6488846 During boot, the domain console might display
a checksum error for the SG(X)PCI2SCSIU320-
Z SCSI controller I/O card.
Check for the availability of the latest
controller card firmware.
6498780 On the SPARC Enterprise M4000/M5000
servers, the OpenBoot PROM (OBP) might not
detect the on-board disk (HDD) boot device.
Performing a boot disk results in a console
message:
Can’t locate boot device
The PCI or PCI-X plug-in adapter card might
not be seated correctly. Reseat the card in slot 0
of the IOU.
SPARC Enterprise M4000/M5000 Servers Product Notes 7
Cautions for mounting the server in the 19-inch
rack
When you mount the SPARC Enterprise M4000 or M5000 server on the 19-inch rack,
as you insert it all the way seated in the rack, the nut anchoring the bezel may
interfere with the rack column and the server may fail to be seated correctly.
In such a case, please replace the bezel anchoring nut and ring with the E-Ring.
1. Remove the interfering bezel anchoring nut and ring.
M4000 (4 places)
M5000 (6 places)
Ring Bezel Anchoring nut
8 SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1060 November 2007
2. In place of the removed nut and ring, attach the E-Ring, included in the rack
mount kit.
3. Insert the server all the way seated in the rack, to lock it in place.
E-Ring
SPARC Enterprise M4000/M5000 Servers Product Notes 9
Hardware Documentation Updates
TABLE 2 lists known documentation updates.
TABLE 2 Documentation Updates
Title Page Number Update
All SPARC Enterprise
M4000/M5000 servers
documentation
All DVD references are now referred to as CD-RW/DVD-RW.
Updated glossary terms:
External I/O Expansion Unit — A rack mountable device to
add-on PCI slots. It is connected to the system’s I/O unit
through the PCIe connection and contains one or two I/O boats.
I/O boat — An I/O unit in the External I/O Expansion Unit.
The I/O boat connects to a PCI-Express (PCIe) slot through a
PCIe switch or a PCI-X bridge on the I/O boat and offers either
six PCI-X slots or six PCIe slots.
SPARC Enterprise
M4000/M5000 Servers
Site Planning Guide
1-7 TABLE 1-3 "Midrange Servers Physical Specifications"
Correct numerical value of "Depth" is 810mm/31.9 in. for the
SPARC Enterprise M4000/M5000 servers.
SPARC Enterprise
M4000/M5000 Servers
Installation Guide
2-8 TABLE 2-3 "Powercords"
See “Cable Connections” on page 12 for the changes.
SPARC Enterprise
M4000/M5000 Servers
Installation Guide
3-3 3.3, “Connecting the Administration Console”.
The RJ-11 connector at the top of Figure 3-1 was not labelled.
The RJ-11 connector is not for connection to TNV circuits. Do
not use this connector.
SPARC Enterprise
M4000/M5000 Servers
Service Manual
1-4 1.3.4, "Handling Components"
The following caution will be added.
Caution – In the PCI cassette part,
when removing cables such as LAN
cable, if your finger can't reach the latch
lock of the connector, press the latch
with a flathead screwdriver to remove
the cable. Forcing your finger into the
clearance can cause damage to the PCI
card.
10 SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1060 November 2007
SPARC Enterprise
M4000/M5000 Servers
Service Manual
4-11 4.4.3, "Powering the Server Off Manually" Step 4
"Verify the state of the status XSCF STANDBY LED on the
operator panel is off" should be replaced with the following
description: "Verify the state of the status Power LED on the
operator panel is off."
SPARC Enterprise
M4000/M5000 Servers
Service Manual
8-5 8.1.2, "Removing the PCI Cassette"
The cable management arm of the SPARC Enterprise M4000
server will not be supported. The following note will be deleted
accordingly.
Note - The cable management arm of the SPARC Enterprise
M4000 server might obstruct access to the PCI cassettes. Do not
force the arm out of the way of the cassettes, because it will
become permanently bent. Pull the quick release button and
disconnect the slide end of the arm. Once disconnected, the arm
can be safely held out of the way when removing the cassettes.
Instead, the following caution will be added.
Caution – When removing cables such
as LAN cable, if your finger can't reach
the latch lock of the connector, press the
latch with a flathead screwdriver to
remove the cable. Forcing your finger
into the clearance can cause damage to
the PCI card.
SPARC Enterprise
M4000/M5000 Servers
Service Manual
8-6 8.1.3, "Installing the PCI Cassette"
See “Installing the PCI Cassette” on page 13 for the changes.
SPARC Enterprise
M4000/M5000 Servers
Service Manual
"Cold Replacement"
"This step includes turning the keyswitch to the Service
position, verifying the state of the LEDs and disconnecting
power cables" should be substituted with the following
description: "This step includes turning the keyswitch to the
Service position, verifying that the Power LED is turned off and
disconnecting power cables."
TABLE 2 Documentation Updates (Continued)
Title Page Number Update
SPARC Enterprise M4000/M5000 Servers Product Notes 11
Electrical Specifications
The following changes belong in the SPARC Enterprise M4000/M5000 Servers
Service Manual.
SPARC Enterprise
M4000/M5000 Servers
Service Manual
9-1
15-1
CHAPTER 9, "XSCF Unit Replacement"
CHAPTER 15, "Operator Panel Replacement"
The following important message will be added.
Note – If you replace the XSCF unit and the operator
panel simultaneously, system will not operate normally.
Execute the showhardconf command or the
showstatus command to confirm that the component
replaced earlier is operating normally, before replacing
the subsequent FRU.
SPARC Enterprise
M4000/M5000 Servers
Service Manual
11-7 11.2, "DIMM Replacement"
See “DIMM Replacement” on page 14 for the changes.
SPARC Enterprise
M4000/M5000 Servers
Service Manual
C-7 TABLE C-5 "Power Supply Feature"
See “Electrical Specifications” on page 11 for the changes.
TABLE 3 Power Supply Features
SPARC Enterprise M4000 SPARC Enterprise M5000
Power draw (maximum)
2016W 3738W
Volt A mpere
2058 VA 3815 VA
Heat
6879 BTUs/hr (7258 kJ/hr) 12754 BTUs/hr (13457 kJ/hr)
TABLE 2 Documentation Updates (Continued)
Title Page Number Update
12 SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1060 November 2007
Cable Connections
The following changes belong in the SPARC Enterprise M4000/M5000 Servers
Installation Guide.
TABLE 4 Powercords
System Location Powercord Type
SPARC Enterprise M4000
Server
Americas, Taiwan NEMA L5-15 125V 15A
Japan, Korea NEMA L6-20 250V 20A
RoTW IEC60309 16A 250V, 3PIN with IEC320
C20
SPARC Enterprise M5000
Server
Americas, Taiwan NEMA L5-15 125V 15A
Japan, Korea NEMA L6-20 250V 20A
RoTW IEC60309 16A 250V, 3PIN with IEC320
C20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42

Fujitsu Server M4000/M5000 Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues