REOLINK Argus Eco Mode d'emploi

Marque: REOLINK

Modèle: Argus Eco

Catégorie: Composants de dispositif de sécurité

Taper: Mode d'emploi

Reolink Argus Eco

Quick Start Guide

July 2020

QSG2_A_EN

58.03.001.0191

@ReolinkTech https://reolink.com

Contents

What’s in the Box 2

Camera Introduction 3

Set up the Camera 4

Charge the Battery 5

What’s in the Box

Install the Camera 6

Notes on PIR Motion Sensor 9

Important Notes on Rechargeable Battery Usage

Troubleshooting

Speciﬁcations

Notiﬁcation of Compliance

Argus Eco

(with Battery)

Antenna

Outdoor Security Mount

(with a hook & loop strap)

Reset Needle

Surveillance Sign

Mounting

Hole Template

Micro USB Cable Pack of Screws

Quick Start Guide

1 English English 2

Camera Introduction

Built-in Mic

Status LED

Lens

Daylight Sensor

Built-in PIR Sensor

Reset hole

*Press the reset button with a

pin to restore camera to factory settings.

Power Switch

Micro SD Card Slot

*Always keep the rubber plug closed ﬁrmly.

Speaker

Antenna

Micro USB Port

Battery Status LED

Set up the Camera

Download and Launch the Reolink App or Client software, and follow the onscreen instructions

to ﬁnish initial setup.

•

On Smartphone

Scan to download the Reolink App.

•

On PC

Download path of the Reolink Client: Go to https://reolink.com > Support > App & Client.

Different states of the status LED:

Red Light: WiFi connection failed

Blue Light: WiFi connection succeeded

3 English

Blinking: Standby status

On: Working status

English 4

Charge the Battery

It's recommended to fully charge the battery before mounting the camera outdoors.

Install the Camera

•

Install the camera 2-3 meters

(7-10 ft) above the ground.

This height maximizes the

detection range of the PIR

motion sensor.

•

For better motion detection

performance, please install the

camera angularly.

Charge the battery with a power adapter.

Charge the battery with Reolink solar panel.

NOTE: If a moving object

approaches the PIR sensor

vertically, the camera may fail

to detect motion.

For better weatherproof performance, please

always cover the USB charging port with the

rubber plug after charging the battery.

Charging indicator:

Orange LED: Charging Green LED: Fully charged

NOTE: The solar panel is NOT included in the package. You can buy one from Reolink

official online stores.

5 English

English 6

OPEN

Mounting Height:

2-3 Meters

PIR Detection Distance:

2-10 Meters

Mount the Camera Attach the Camera to a Tree

Drill holes in accordance with a mounting hole

template and screw the security mount into the wall.

If you are mounting the camera on any hard surface,

insert plastic anchors into the holes ﬁrst.

Thread the provided strap

to the mounting plate.

Attach the plate to the security

mount with the smaller screws.

Fasten the security mount to

a tree.

Screw the antenna to the

camera and then install

the camera to the security

mount.

7 English

Loose the adjusting knob

on the mount and adjust

the camera to the proper

direction.

Stiffen the adjustment knob to

lock the camera.

Install the camera and adjust the

camera angles as instructed in step

3 in the previous installation guide.

English 8

English

Notes on PIR Motion Sensor

PIR Sensor Detection Distance

The PIR detection range can be customized to meet your speciﬁc needs. You can refer to

the following table to set it up in Device Settings via Reolink App.

Important Notes on Reducing

False Alarms

Sensitivity

Value

Detection Distance

(For moving and living objects)

Low

0 - 50

Up to 5 meters (16ft)

Mid

51 - 80

Up to 8 meters (26ft)

High

81 - 100

Up to 10 meters (33ft)

NOTE: Higher sensitivity offers longer detection distance but it may lead to more false

alarms. It's recommended to set up the sensitivity level to “Low” or “Mid” when you install

the camera outdoors.

•

Do not face the camera towards any objects with bright lights, including

sunshine, bright lamp lights, etc.

•

Do not place the camera too close to a place with heavy traffic. Based on

our numerous tests, the recommended distance between the camera and

the vehicle would be 16 meters (52ft).

•

Do not place the camera near outlets, including the air conditioner vents,

humidiﬁer outlets, the heat transfer vents of projectors, etc.

•

Do not install the camera at places with strong wind.

•

Do not face the camera towards a mirror.

•

Keep the camera at least

meter away from any wireless devices,

including WiFi routers and phones in order to avoid wireless interference.

9 English English 10

11 English

Important Notes on Rechargeable Battery Usage

Reolink Argus Eco is not designed for 24/7 full capacity running or around-the-clock live

streaming. It’s designed to record motion events and remotely view live streaming only

when you need it. Learn useful tips on how to extend the battery life in this post:

https://support.reolink.com/hc/en-us/articles/360006991893

Charge the rechargeable battery with a standard and high-quality DC 5V/9V battery charger or

Reolink solar panel. Do not charge the battery with solar panels from any other brands.

Charge the battery when temperatures are between 0°C and 45°C and always use the battery

when temperatures are between -20°C and 60°C.

Keep the USB charging port dry, clean and free of any debris and cover the USB charging port

with the rubber plug when the battery is fully charged.

Do not charge, use or store the battery near any ignition sources, such as ﬁre or heaters.

Do not disassemble, cut, puncture, short-circuit the battery, or dispose of the battery in water,

ﬁre, microwave ovens and pressure vessels.

Do not use the battery if it gives off an odor, generates heat, becomes discolored or deformed,

or appears abnormal in any ways. If the battery is being used or charged, remove the battery

from the device or the charger immediately, and stop using it.

Always follow the local waste and recycle laws when you get rid of the used battery.

11 English

Troubleshooting

Camera Is Not Powering on

If your camera is not powering on,

please apply the following solutions:

•

Make sure the power switch is turned on.

•

Charge the battery with a DC 5V/2A power

adapter. When the green light is on,

the battery is fully charged.

If these won't work, please contact Reolink

Support https://support.reolink.com/.

Failed to Scan the QR

Code on the Phone

If you cannot scan the QR code on your

phone, please try the following solutions:

•

Remove the protective ﬁlm from the

camera lens.

•

Wipe the camera lens with a dry

paper/towel/tissue.

•

Vary the distance between your camera

and the mobile phone so that the camera

can focus better.

•

Try to scan the QR code under sufficient

lighting.

If these won't work, please contact Reolink

Support https://support.reolink.com/.

WiFi Connection Failed During

Initial Setup Process

If the camera fails to connect to WiFi,

please try the following solutions:

•

Please make sure the WiFi band is 2.4GHz,

the camera does not support 5GHz.

•

Put the camera closer to your router to

ensure a strong WiFi signal.

•

Change the encryption method of the WiFi

network to WPA2-PSK/WPA-PSK

(safer encryption) on your router interface.

•

Change your WiFi SSID or password and

make sure that SSID is within 31 characters

and password is within 64 characters.

•

Set your password using only the characters

available on the keyboard.

If these won't work, please contact Reolink

Support https://support.reolink.com/.

English

Speciﬁcations

Video

Video Resolution: 1080p HD at 15 frames/sec

Field of View: 100° diagonal

Night Vision: Up to 10 m (33 ft)

PIR Detection & Alerts

PIR Detection Distance:

Adjustable/up to 10m (33ft)

PIR Detection Angle: 100° horizontal

Audio Alert:

Customized voice-recordable alerts

Other Alerts:

Instant email alerts and push notiﬁcations

General

Operating Temperature:

-10°C to 55°C (14°F to 131°F)

Weather Resistance:

IP65 certiﬁed weatherproof

Size: 71 x 186 mm

Weight (Battery included): 320g (11.2 oz)

Antenna List

External Antenna, 2dBi, 2400-2500MHz

Notiﬁcation of Compliance

FCC Compliance Statement

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) this device may not cause

harmful interference, and (2) this device must

accept any interference received, including

interference that may cause undesired

operation. Changes or modiﬁcations not

expressly approved by the party responsible

for compliance could void the user's authority

to operate the equipment.

NOTE: This equipment has been tested and

found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses and can radiate

radio frequency energy and, if not installed

and used in accordance with the instructions,

may cause harmful interference to radio

communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user

is encouraged to try to correct the

interference by one or more of the following

measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the

equipment and receiver.

•

Connect the equipment into an outlet on a

circuit different from that to which the

receiver is connected.

•

Consult the dealer or an experienced

radio/TV technician for help.

FCC RF warning statement:

This equipment complies with FCC radiation

exposure limits set forth for an uncontrolled

environment. This equipment shall be

installed and operated with minimum

distance 20cm between the radiator & body.

Simpliﬁed EU Declaration of

Conformity

Reolink declares that this device is in

compliance with the essential requirements

and other relevant provisions of Directive

2014/53/EU.

Correct Disposal of This Product

This marking indicates that this product should

not be disposed with other household wastes

throughout the EU. To prevent possible harm

to the environment or human health from

uncontrolled waste disposal, recycle it

responsibly to promote the sustainable reuse

of material resources. To return your used

device, please use the return and collection

systems or contact the retailer where the

product was purchased. They can take this

product for environment safe recycling.

13 English English 14

Limited Warranty

This product comes with a 2-year limited

warranty that is valid only if purchased from

Reolink Official Store or a Reolink authorized

reseller. Learn more:

https://reolink.com/warranty-and-return/.

NOTE: We hope that you enjoy the new

purchase. But if you are not satisﬁed with the

product and plan to return, we strongly

suggest that you reset the camera to factory

default settings and take out the inserted SD

card before returning.

Terms and Privacy

Use of the product is subject to your

agreement to the Terms of Service and

reach of children.

End User License Agreement

By using the Product Software that is

embedded on the Reolink product, you agree

to the terms of this End User License

Agreement (“EULA”) between you and Reolink.

Learn more: https://reolink.com/eula/.

ISED Radiation Exposure Statement

This equipment complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with

minimum distance 20cm between the radiator & your body.

Cet équipement est conforme aux limites d'exposition IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance

minimale de 20 cm entre le radiateur et le corps.

OPERATING FREQUENCY

(the maximum transmitted power)

2412MHz—2472MHz (18dBm)

Technical Support

If you need any technical help, please visit our official support site and contact our support team before returning the products, https://support.reolink.com.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada

applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:

(1) L' appareil ne doit pas produire de brouillage;

(2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement.

This radio transmitter [IC: 26839-2204B] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed

below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type

listed are strictly prohibited for use with this device.

Cet émetteur radio [IC: 26839-2204B] a été approuvé par Innovation, Sciences et Développement économique Canada pour fonctionner avec les types d'antenne

énumérés ci-dessous, avec le gain maximal admissible indiqué. Les types d'antenne non inclus dans cette liste qui ont un gain supérieur au gain maximum indiqué

pour tout type répertorié sont strictement interdits pour une utilisation avec cet appareil.

15 English