In Common With Calla Manuel utilisateur

Marque: In Common With

Modèle: Calla

Catégorie: Accessoires de moto

Taper: Manuel utilisateur

Part G

Calla Shade

Part F

G9 LED Bulb

Part C

Wago Clips (x3)

Part A

Backplate

Part D

Flora Diuser

Part B

Mounting Screws (x4)

Part E

Tool + Washer

Part H

Canopy + Stem

Calla Petite Pendant

Assembly Guide incommonwith.com1 of 4

Contents

How to Install Your New Light

Please check that you received all of the components pictured in

this guide. Reach out to us if anything is missing. It’s very rare, but it

happens. Don’t forget to turn o the electrical power source.

Tools you will need that aren’t included: standard wire stripper,

Phillips head screwdriver.

CAUTION

Electrical shock risk. Turn o electrical power at the main fuse box

or circuit panel before beginning installation, servicing the light,

or installing accessories. We recommend working with a qualified

electrician familiar with the type of work you’d like done.

ATTENTION

Risque de choc électrique. Coupez l’alimentation électrique au

niveau de la boîte à fusibles principale ou du panneau de circuits

avant de commencer l’installation, l’entretien de la lumière ou

l’installation d’accessoires. Nous vous recommandons de travailler

avec un électricien qualifié familier avec le type de travail que vous

souhaitez eectuer.

Calla Petite Pendant

Assembly Guide incommonwith.com2 of 4

Step 2: Mount the backplate (A) to the junction box using a phillips head

screwdriver to tighten the mounting screws (B).

Step 1: Turn o electrical power at the main fuse box or circuit panel

before beginning installation.

Step 3: Gently slide the canopy cover down the stem (H).

Step 4: Use the wago clips (C) to connect the fixture’s wires to the

corresponding wires from the junction box in the wall or ceiling. White

is neutral; Black is live; Green/ Yellow is ground. One ground wire will be

attached to the backplate (A), the other ground wire should come from

the junction box. If needed use a wire stripper to remove 3/8” of the

insulation from each wire before inserting them into the corresponding

wago clip.

Calla Petite Pendant

Assembly Guide incommonwith.com3 of 4

Step 5: Mount canopy base on the stem (H) into the backplate using a

phillips head screwdriver to tighten mounting screws (B).

Step 6: Gently slide canopy cover back up the stem (H). Rotate the

canopy cover clockwise to secure firmly in place.

Step 7: Carefully align the socket with the hole in the shade, and slide

the shade up. With one person holding the shade (G) in place, use the

included tool (E) to thread the washer, tightening the shade to the stem

(H).

Step 8: Push included bulb into socket (F).

Calla Petite Pendant

Assembly Guide incommonwith.com4 of 4

Step 9: Thread the diuser over the bulb (D). Turn the power back on at

the main fuse box or circuit panel you disabled before installation.

In Common With Calla Manuel utilisateur

Marque: In Common With

Modèle: Calla

Catégorie: Accessoires de moto

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: In Common With Calla User manual

In Common With Calla Manuel utilisateur

In Common With Calla Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents