In Common With PALOMA Manuel utilisateur

Marque: In Common With

Modèle: PALOMA

Catégorie: Accessoires de moto

Taper: Manuel utilisateur

Paloma Pendant

Assembly Guide incommonwith.com1 of 4

Contents

How to Install Your New Light

Please check that you received all of the components pictured in

this guide. Reach out to us if anything is missing. It’s very rare, but it

happens. Don’t forget to turn o the electrical power source.

Tools you will need that aren’t included: standard wire stripper,

Phillips head screwdriver.

CAUTION

Electrical shock risk. Turn o electrical power at the main fuse box

or circuit panel before beginning installation, servicing the light,

or installing accessories. We recommend working with a qualified

electrician familiar with the type of work you’d like done.

ATTENTION

Risque de choc électrique. Coupez l’alimentation électrique au

niveau de la boîte à fusibles principale ou du panneau de circuits

avant de commencer l’installation, l’entretien de la lumière ou

l’installation d’accessoires. Nous vous recommandons de travailler

avec un électricien qualifié familier avec le type de travail que vous

souhaitez eectuer.

Part J

Paloma Shade

Part E

G9 LED Bulb

Part B

Wago Clips (x3)

Part A

Backplate

Part F

Orb 5 Diuser

Part C

Mounting Screws (x2)

Part I

Stem

Part H

Canopy Cover

Part G

Canopy Base

Part D

Mounting Screws (x2)

Paloma Pendant

Assembly Guide incommonwith.com2 of 4

Step 2: Mount the backplate (A) to the junction box using a phillips head

screwdriver to tighten the mounting screws (C).

Step 1: Turn o electrical power at the main fuse box or circuit panel

before beginning installation.

Step 3: Feed the wires from the shade assembly (J) through the brass stem

(I) of the pendant.

Step 4: Secure the stem (I) to the shade assemly (J). Rotate the stem

clockwise to secure firmly in place..

Step 7: Use the wago clips (F) to connect the fixture’s wires to the

corresponding wires from the junction box in the wall or ceiling. White

is neutral; Black is live; Green/ Yellow is ground. One ground wire will be

attached to the backplate (A), the other ground wire should come from

the junction box. If needed use a wire stripper to remove 3/8” of the

insulation from each wire before inserting them into the corresponding

wago clip.

Paloma Pendant

Step 5: Gently slide the canopy cover (H) down the stem (I).

Assembly Guide incommonwith.com3 of 4

Step 6: Secure the brass stem to the canopy base (G). Rotate the stem

clockwise to secure firmly in place.

Step 8: Mount canopy base (G) into the backplate using a phillips head

screwdriver to tighten mounting screws (D)

Paloma Pendant

Step 9: Secure the canopy cover (H) to the canopy base (G). Rotate the

canopy cover clockwise to secure firmly in place.

Assembly Guide incommonwith.com4 of 4

Step 10: Gently squeeze the protective paper and remove from canopy

cover. Discard.

Step 11: Push lightbulb (E) into the socket of the shade assembly (I).

Step 12: Screw the diuser (F) into the glass holder in the shade (I). Turn

the power back on at the main fuse box or circuit panel you disabled

before installation.

In Common With PALOMA Manuel utilisateur

Marque: In Common With

Modèle: PALOMA

Catégorie: Accessoires de moto

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: In Common With PALOMA User manual

In Common With PALOMA Manuel utilisateur

In Common With PALOMA Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents