Shark IC160 Manuel utilisateur

OWNER’S GUIDE

GUIDE D’UTILISATION

MANUAL DEL PROPIETARIO

IC160

Series • Série • Serie

CORD-FREE POWERED LIFT-AWAY®

ION™P50

sharkclean.com

QUICK

START

GUIDE

THE DUOCLEAN® FLOOR NOZZLE, WAND,

POD, HANDLE, AND HOSE CONTAIN

ELECTRICAL CONNECTIONS:

1. This vacuum consists of a motorized

nozzle, wand, vacuum pod, handle,

and hose. These components contain

electrical connections, electrical wiring,

and moving parts that potentially present

risk to the user.

2. Before each use, carefully inspect

all parts for any damage. If a part is

damaged, discontinue use.

3. Use only identical replacement parts.

4. This vacuum contains no serviceable parts.

5. Use only as described in this manual.

DO NOT use the vacuum for any purpose

other than those described in this manual.

6. With the exception of ﬁlters, DO NOT

expose any parts of the vacuum to water

or other liquids.

GENERAL USE

7. This vacuum is not intended for use by

anyone with reduced physical, sensory or

mental capabilities, or lack of experience

and knowledge, unless they have been

given supervision or instruction concerning

use of the appliance by a person responsible

for their safety. Children should be

supervised to ensure that they DO NOT

play with the vacuum.

8. Always turn o the vacuum before

connecting or disconnecting any current

carrying hoses, motorized nozzles,

chargers, batteries, or other electrical or

mechanical parts.

9. DO NOT handle plug or vacuum with

wet hands.

10. DO NOT use without dust cup, ﬁlters, and

brushrolls in place.

11. Only use Shark® branded ﬁlters and

accessories. Failure to do so will void

the warranty.

12. DO NOT put any objects into nozzle or

accessory openings. DO NOT use with

any opening blocked; keep free of dust,

lint, hair, and anything that may reduce

airﬂow.

13. DO NOT use if nozzle or accessory airﬂow

is restricted. If the air paths or the

motorized ﬂoor nozzle become blocked,

turn the vacuum o and remove the

battery. Remove all obstructions before

you reinsert the battery and turn on the

unit again.

14. Keep nozzle and all vacuum openings

away from hair, face, ﬁngers, uncovered

feet, or loose clothing.

15. DO NOT use if vacuum is not working as

it should, or has been dropped, damaged,

left outdoors, or dropped into water.

16. Use extra care when cleaning on stairs.

17. DO NOT leave the vacuum unattended

while powered on.

18. When powered on, keep the vacuum

moving over the carpet surface at all

times to avoid damaging the carpet ﬁbers.

19. DO NOT place vacuum on unstable

surfaces such as chairs or tables.

20. DO NOT use to pick up:

a) Liquids

b) Large objects

c) Hard or sharp objects (glass, nails,

screws, or coins)

d) Large quantities of dust (including

drywall, ﬁreplace ash, or embers).

DO NOT use as an attachment to

power tools for dust collection.

e) Smoking or burning objects (hot

coals, cigarette butts, or matches)

f) Flammable or combustible materials

(lighter ﬂuid, gasoline, or kerosene)

g) Toxic materials (chlorine bleach,

ammonia, or drain cleaner)

WARNING

To reduce the risk of ﬁre, electric shock, injury, or property damage:

IMPORTANT SAFETY INSTRUCTIONS

FOR HOUSEHOLD USE ONLY • PLEASE READ CAREFULLY BEFORE USE

If the charger plug does not ﬁt fully into the outlet, reverse the plug. If it still does

not ﬁt, contact a qualiﬁed electrician. DO NOT force into outlet or try to modify to ﬁt.

sharkclean.com

SAVE THESE INSTRUCTIONS

21. DO NOT use in the following areas:

a) Poorly lit areas

b) Wet or damp surfaces

c) Outdoor areas

d) Spaces that are enclosed and may

contain explosive or toxic fumes

or vapors (lighter ﬂuid, gasoline,

kerosene, paint, paint thinners,

mothprooﬁng substances, or

ﬂammable dust)

22. Turn o the vacuum and remove the

battery before any adjustment, cleaning,

maintenance, or troubleshooting, such

preventative safety measures reduce the

risk of starting the appliance accidentally.

23. Turn o the vacuum and remove the

battery before any adjustment, cleaning,

maintenance or troubleshooting.

24. During cleaning or routine maintenance,

DO NOT cut anything other than hair,

ﬁbers, or string wrapped around the

brushroll.

25. Allow all ﬁlters to air-dry completely

before replacing in the vacuum to

prevent liquid from being drawn into

electric parts.

26. DO NOT modify or attempt to repair the

vacuum or the battery yourself, except

as indicated in this manual. DO NOT

use the battery or vacuum if it has

been modiﬁed or damaged. Damaged

or modiﬁed batteries may exhibit

unpredictable behavior resulting in ﬁre,

explosion, or risk of injury.

BATTERY PACK

27. The battery is the power source for the

vacuum. Carefully read and follow all

charging instructions.

28. To prevent unintentional starting, ensure

the vacuum is powered o before picking

up or carrying the vacuum. DO NOT carry

the appliance with your ﬁnger on the

power switch.

29. Use only Shark® chargers YLS0244A

or ZD024S332096US, and use only

battery XBAT300. Use of batteries

or battery chargers other than those

indicated may create a risk of ﬁre.

30. Keep the battery away from all metal

objects such as paper clips, coins, keys,

nails, or screws. Shorting the battery

terminals increases the risk of ﬁre or burns.

31. Under abusive conditions, liquid may be

ejected from the battery. Avoid contact

with this liquid, as it may cause irritation

or burns. If contact occurs, ﬂush with

water. If liquid contacts eyes, seek

medical help.

32. Battery should not be stored at

temperatures below 37.4°F (3°C) or

above 104°F (40°C) to maintain long-

term battery life.

33. DO NOT charge battery at temperatures

below 50°F (10°C) or above 104°F (40°C).

34. Store the appliance indoors. DO NOT use

or store it below 37.4°F (3°C). Ensure the

appliance is at room temperature before

operating.

35. DO NOT expose the battery to ﬁre or

temperatures above 265°F (130°C) as it

may cause explosion.

36. Follow all charging instructions. DO NOT

charge the battery at temperatures below

50°F (10°C) or above 104°F (40°C).

Charging improperly or at temperatures

not in the speciﬁed range may damage

the battery and increase the risk of ﬁre.

sharkclean.com

ASSEMBLY

1. Insert wand into ﬂoor nozzle.

2. Insert handle into wand.

3. Align the bottom of pod onto the rails on the front of the neck of the ﬂoor nozzle.

Slide pod down the rails until it clicks into place.

4. Connect hose to back of pod, and attach hose clip onto wand.

5. Insert charged battery into pod with the handle toward the back.

To ensure proper insertion, the handle on battery must be down.

IMPORTANT: For proper operation, ensure all connections are securely clicked into place.

(Click)

1

(Click)

2

(Click)

4

3

(Click)

5

sharkclean.com

4 WAYS TO CHARGE THE BATTERY

OUT OF VACUUM

IN CHARGING CRADLE

IN VACUUM

IN CHARGE & GO DOCK

NOTE: Only one charger is provided.

NOTE: Not all charging options are available with all conﬁgurations. Please see the enclosed Quick Start Guide for your unit.

Additional charging options can be purchased at sharkaccessories.com.

NOTE: When charging in the ﬂoor dock, insert vacuum so that wheels align with the wheel indentations on the base of the dock.

NOTE: When using the cradle or the dock, insert the charger plug into the port and rotate to lock into place. Battery will not

charge unless the charger is locked into place.

To remove the battery for charging, lift the handle on top of the battery and pull up.

The battery must be charged before ﬁrst use.

A complete charge takes approximately 3.5 hours.

IMPORTANT: When charging, connect the charger to the port ﬁrst, then plug the

charger into wall outlet.

sharkclean.com

IN USE: LIGHTS ILLUMINATE STEADILY

Full

Charge

Full

Charge

Nearly

Full

Mid

Charge

Mid

Charge

Low

Charge

Low

Charge

Needs

Charge

CHARGING: ONE LIGHT FLASHES

TEMPERATURE ISSUE: FIRST AND THIRD INDICATOR LIGHTS ALTERNATE FLASHING

NOTE: The battery must be charged before ﬁrst use. A complete charge takes approximately 3.5 hours.

NOTE: After reaching full charge, the indicator light will shut o after 5 minutes.

Charge Indicator

TOP OF BATTERY

CHARGE INDICATOR LIGHTS

If ﬁrst and third indicator lights ﬂash alternately, the battery temperature is not

optimal. Leave battery plugged in and charging will resume when temperature

returns to optimal level.

OPERATING THE VACUUM

SETTINGS

POWER BUTTON SURFACE SUCTION LEVEL

Press icon to turn power

on or o.

Power

Press icon to select surface

setting:

Carpet

For carpets.

Floor

For bare ﬂoors and

small area rugs.

Press icon to boost power:

ION BOOST

When in Lift-Away®

mode, press BOOST

icon to turn on or o.

The default power setting

on ﬂoors and carpets is

ION Power mode. For

an additional boost of

suction power, press and

hold the BOOST icon.

NOTE: For deep carpet cleaning per ASTM F608 (embedded dirt in carpets), use Carpet setting.

NOTE: Select Carpet for stuck-on dust and debris.

IMPORTANT: Your unit will default into ION BOOST mode

when using in Lift-Away. ION BOOST mode shortens runtime.

sharkclean.com

OPERATING THE VACUUM

RUNTIMES

NOTE: All accessories can be attached to the wand or the handle.

NOTE: Pod can also remain on ﬂoor nozzle when using handle or wand.

Press the Wand Release button until it clicks, then

pull up on wand to detach from the ﬂoor nozzle.

DETACH THE WAND

Pull the Handle Release trigger to detach the

handle from the wand.

DETACH THE HANDLE

Press Lift Away button on handle and lift pod o

ﬂoor nozzle.

DETACH THE POD

TIP: See next page for all the dierent

ways you can use your vacuum.

MODE AND SETTINGS ION POWER ION BOOST

UPRIGHT & POWERED LIFT-AWAY®

(CARPET) Up to 28 minutes

Up to 18 minutes

UPRIGHT & POWERED LIFT-AWAY

(FLOOR) Up to 28 minutes

ABOVE-FLOOR & LIFT-AWAY

(WAND OR HANDLE) Up to 50 minutes

POD, HANDLE AND WAND ARE DETACHABLE

sharkclean.com

OPERATING THE VACUUM

IMPORTANT: See the previous page for instructions on how to detach the pod, wand, and handle.

VERSATILE FLOOR-TO-CEILING CLEANING

For cleaning carpets and hard ﬂoors. To activate

brushroll, step on ﬂoor nozzle and tilt handle back.

UPRIGHT

Use the wand in Lift-Away mode for more reach

when cleaning above-ﬂoor areas like crown

molding or baseboards.

LIFT-AWAY® WITH WAND

Use the handle in Lift-Away mode for more

detailed cleaning of above-ﬂoor areas like

upholstery or window sills.

LIFT-AWAY WITH HANDLE

Use Powered Lift-Away® to reach under furniture

to clean carpets and hard ﬂoors.

UNDER FURNITURE

sharkclean.com

MAINTENANCE

EMPTYING THE DUST CUP

To remove Dust Cup from pod, pinch and slide side

tabs. Tilt dust cup forward, then lift to remove.

To reinstall dust cup, place bottom into pod and

then tilt dust cup toward the wand until it clicks

into place.

Press lower release button to open bottom of

dust cup.

To open top of dust cup, press upper release button

and lift handle. Remove debris from Lint Screen.

IMPORTANT: Remove the battery before performing any maintenance. To remove, lift the

handle on top of the battery and pull up.

Lint

Screen

sharkclean.com

MAINTENANCE

1. Slide down Filter Door release button.

2. Tilt ﬁlter door and lift o.

3. Remove ﬁlter from pod. Pull ﬁlter o frame.

4. Rinse ﬁlter and ﬁlter frame with water ONLY.

5. Once completely dry, reinsert ﬁlter onto

ﬁlter frame.

6. While holding the tabs on the frame, slide the

ﬁlter back completely to secure into place.

7. Reinsert bottom of ﬁlter door into slots on pod.

Tilt door to close, pressing until it clicks into place.

Perform maintenance on your ﬁlters once a month to keep your vacuum's suction power optimal.

IMPORTANT:

Rinse pre-motor ﬁlter and frame with water ONLY. DO NOT use soap. Allow to completely

air-dry for at least 24 hours before reinstalling.

Your vacuum comes equipped with three ﬁlters located on the vacuum pod: two pre-motor ﬁlters and

one HEPA ﬁlter to capture and trap dust and debris.

CLEANING PRE-MOTOR FILTER (ONCE A MONTH)

Clean

Filters

Monthly

Filter

Frame

Filter

Door

sharkclean.com

NOTE: To order replacement parts and filters, visit sharkaccessories.com.

Replacement Pre-Motor

Foam & Felt Filter Kit

XFFK160

Replacement HEPA Filter

XHEPA160

Follow the previous instructions for removing ﬁlters. The Pre-Motor Filter should be replaced every

2.5 years. The HEPA Filter should be replaced every 3 years.

MAINTENANCE

CLEANING HEPA FILTER (ONCE A YEAR)

REPLACING FILTERS

1. Pull up on HEPA Filter access tab to remove.

2. Rinse ﬁlter with water ONLY and let air-dry for

24 hours before reinstalling.

3. When dry, reinsert HEPA Filter and press down

until it clicks into place.

P

u

l

t

o

A

c

e

s

H

E

P

A

F

i

l

t

e

r

HEPA

Filter

Perform maintenance on your HEPA ﬁlter once a year to keep your vacuum's suction power optimal.

IMPORTANT: Rinse HEPA ﬁlter with water ONLY. DO NOT use soap. Allow to completely air-dry for at

least 24 hours before reinstalling. DO NOT scrub HEPA ﬁlter.

sharkclean.com

NOTE: To order replacement parts and filters, visit sharkaccessories.com.

MAINTENANCE

1. Using a coin, turn locks counterclockwise to

open, then lift o cover to access Brushroll.

2. Use scissors to cut along the groove in the

brushroll to remove any string, hair, or debris.

3. Check for blockages in Debris Intake.

4. Replace cover and turn locks clockwise to close.

1. Slide Eject Roller button.

2. To remove Soft Roller, pull out the right end ﬁrst.

3. Tap loose debris o the Soft Roller. Use a dry

towel to wipe clean, or to remove any hair or

ﬁbers caught in the teeth behind the Soft Roller.

4. Rinse as needed. Use ONLY water, and let air-dry

completely for at least 24 hours.

5. When dry, insert the left end of the roller ﬁrst,

then push the right end into place with the

word Front facing forward.

BRUSHROLL SOFT ROLLER

CLEANING OR REPLACING BRUSHROLLS

TURN LOCKS LIFT COVER

sharkclean.com

MAINTENANCE

CHECKING FOR BLOCKAGES

Detach hose from vacuum pod, and check

opening on back of pod for blockages.

Detach wand from ﬂoor nozzle and handle,

and check both ends of wand for blockages.

Detach wand from ﬂoor nozzle. Tilt nozzle

neck back to straighten the airway, and

remove any blockages.

Detach handle from wand and hose from the

vacuum pod, and check openings for blockages.

Detach dust cup from vacuum pod. Empty dust

cup, remove debris from lint screen, and check

for blockages.

IMPORTANT:

DO NOT use sharp or metal objects to clear blockages.

NOTE: Turn o vacuum and remove battery before checking for blockages.

sharkclean.com

NOTE: Not all accessories come with all units. Please see the enclosed Quick Start Guide for your unit's conﬁguration.

To order additional accessories, visit sharkaccessories.com.

R

L

S

M

T

N

U

O

HG I

Q

K

P

J

E

B

D

A

F

C

A 8" Crevice Tool (255FLIH380)

B 12" Crevice Tool (248FLIH200)

C 18" Flexi Crevice Tool (1352FC200)

D Flexible Hose (1356FC200)

E Duster Crevice Tool (249FLIH200)

F Dusting Brush (250FLIH200)

G Multi-Angle Dusting Brush (1354FC200)

H Anti-Allergen Dust Brush (233FLIH100)

I Upholstery Tool (251FLIH200)

J Wide Upholstery Tool (1355FC200)

K Pet Multi-Tool (1353FC200)

L Deep-Cleaning Motorized Pet Tool (496FFJ160)

M MultiFLEX® Under-Appliance Wand (234FLIH100)

N Home & Car Detail Kit (XHMCR380)

O Precision Duster (XDETNH380)

P Onboard Tool Clip (392FFJH380)

Q Accessory Bag (XBGV300)

R ION Power Core Battery (XBAT300)

S ION Power Core Charger (XCRGA160)

T Charge & Go Floor Dock (XCRGFD160)

U ION Core Charging Cradle (XSCCRD160)

ADDITIONAL ACCESSORIES AVAILABLE ON SHARKACCESSORIES.COM

sharkclean.com

TROUBLESHOOTING

LIGHT INDICATOR WHAT IT MEANS

Floor and Carpet LEDs

ﬂash together Blockage detected. Turn o

unit and remove blockage.

BOOST LED ﬂashes

Unit temperature is high.

Turn o vacuum. While

unit is cooling, look for

blockages and remove any

that are found. Filters may

also need to be cleaned. See

Maintenance section.

FIRST and THIRD BATTERY

INDICATOR LEDs alternate

ﬂashing

Battery temperature is

not optimal, so charging is

temporarily paused. Leave

battery plugged in and

charging will resume soon.

sharkclean.com

TROUBLESHOOTING

Vacuum is not picking up debris. No suction or light suction.

• Ensure handle, hose, dust cup, and wand are all securely connected onto the unit.

• Check ﬁlters to see if they need cleaning. Follow instructions for rinsing and completely air-drying the

ﬁlters before reinserting them in the vacuum.

• Dust cup may be full; empty dust cup.

• Check wand, hose, hose connections, nozzle, and accessories for blockages; clear blockages if required.

• Check ﬂoor nozzle for blockages; clear blockages if required.

• Remove any string, carpet ﬁbers, or hair that may be wrapped around the brushroll and Soft Roller or

trapped behind the Soft Roller.

Vacuum lifts area rugs.

• Turn o vacuum, and move it away from any obstruction. Turn on vacuum and tilt handle back to

activate brushroll.

• Make sure the ION BOOST setting is o and/or try Floor mode by pressing the surface setting button.

• Turn o the unit to disengage the brushroll and restart with the Power button.

Brushroll/Soft Roller does not spin.

• If Brushroll Indicator Light on the ﬂoor nozzle turns red, the brushroll and/or Soft Roller have stopped

spinning. Immediately turn o and remove battery from vacuum pod and remove blockage before

reconnecting and turning vacuum back on. If light turns green, the blockage has been successfully cleared.

• If headlights are not illuminated, there is a connection issue between the hose, pod, wand, and nozzle.

Try disconnecting the pieces and then reconnecting them, sliding in each one until it clicks securely into

place. If the headlights still do not illuminate, please contact Customer Service at 1-800-798-7398.

Vacuum turns o on its own or will not turn on.

There are several possible reasons for the vacuum turning o on its own, including blockages, battery

issues, and overheating. If vacuum turns o on its own, perform the following steps:

1. Check charge indicator lights to see if battery needs to be recharged. If it does not need charging, turn

o vacuum, and remove battery.

2. Empty dust cup and clean ﬁlters.

3. Check wand, accessories, and inlet openings and remove any blockages.

4. Allow unit and battery to cool for at least 45 minutes, until it returns to room temperature.

5. Return battery to vacuum and press Power button.

Dust cup will not latch onto unit:

• The dust cup will not latch if the pod is not inserted properly onto the unit. Align the bottom of pod onto

the rails on the front of the neck of the ﬂoor nozzle. Slide pod down the rails until it clicks into place.

Battery not charging.

• Batteries outside of optimal temperature range may not begin charging immediately. Move to room

temperature area and/or allow battery to cool before charging.

• Please review battery runtimes in the Operating the Vacuum section.

• When charging with the cradle, ensure battery is pressed all the way down onto cradle and that charge

indicator lights illuminate.

• For use with ﬂoor dock charging station, ensure vacuum pod is securely mounted to dock and that charge

indicator lights illuminate.

• Battery life expectancy is at least two years and comes with a two-year limited warranty. New battery

packs can be purchased at sharkaccessories.com.

• When charging with the cradle or ﬂoor dock, insert the charger plug into the port and rotate to lock into

place. Battery will not charge unless the charger is locked into place.

Battery not inserting into vacuum.

• M ake sure handle is down before pushing battery securely into place.

• M ake sure HEPA ﬁlter is securely clicked into place prior to inserting the battery.

For all other issues, please call Customer Service 1-800-798-7398.

sharkclean.com

FIVE (5) YEAR LIMITED WARRANTY

The 5-Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC.

Warranty coverage applies to the original owner and to the original product only and is not transferable.

SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of 5 years

from the date of purchase when it is used under normal household conditions and maintained according to the

requirements outlined in this instruction manual, subject to the following conditions and exclusions.

What is covered in my warranty?

1. The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole discretion, will be

repaired or replaced for up to 5 years from the original purchase date.

2. In the rare event that a replacement unit is issued, the warranty coverage ends six months following the

receipt date of the replacement unit, or the remainder of the existing warranty, whichever is greater. If the unit

is replaced, SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered in my warranty?

Our Customer Service/Product Specialists are available to provide all the warranty service options available to

you, including the possibility of upgrading to our VIP Warranty Service Options for select product categories.

1. Normal wear and tear of wearable parts such as foam ﬁlters, HEPA ﬁlters, pads, batteries, etc., which require

regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by

this warranty.

2. Any unit that has been tampered with or used for commercial purposes.

3. SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of

$19.95 for return shipping costs will be charged at the time of return shipment of the repaired or replacement

unit. Shipping fee is subject to change.

4. Damage caused by misuse, abuse, or negligent handling, or damage due to mishandling in transit.

5. Consequential and incidental damages.

6. Defects caused by or resulting from damages from shipping or repairs, service, or alteration to the product or

any of its parts which have been performed by a repair person not authorized by SharkNinja.

7. Products purchased, used or operated outside of North America.

Problems with your unit/How to get service

If your appliance fails to operate properly while in use under normal household conditions within the

warranty period, visit sharkclean.com/support for product care/maintenance self-help. Our Customer Care

and product specialists are also available at 800-798-7398 to assist with product support and warranty

service options.

How to initiate a warranty claim

You can call 1-800-798-7398 to have a Customer Service specialist assist you. Please note you must call

1-800-798-7398 to initiate a warranty claim. Return and Packing Instruction information will be provided at

that time.

For Customer Service hours, visit sharkclean.com

Replacement parts are available for purchase at sharkaccessories.com. For more information on which parts

are classiﬁed as wearable and non-wearable, please visit sharkclean.com/warranty

This warranty gives you speciﬁc legal rights, and you also may have other rights that vary from state to

state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the

above may not apply to you.

sharkclean.com

The 2-Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC.

Warranty coverage applies to the original owner and to the original battery only and is not transferable.

SharkNinja warrants that the battery shall be free from defects in material and workmanship for a period of 2

years from the date of purchase when it is used under normal household conditions and maintained according to

the requirements outlined in this instruction manual, subject to the following conditions and exclusions.

What is covered in my warranty?

1. The original battery, deemed defective, in SharkNinja’s sole discretion, will be replaced for up to 2 years from

the original purchase date.

2. In the rare event that a replacement battery is issued, the warranty coverage for the replacement battery

ends six months following the receipt date of the replacement battery or the remainder of the existing

warranty, whichever is greater.

What is not covered in my warranty?

Our Customer Service/Product Specialists are available to provide all the warranty service options available to you.

1. Normal wear and tear of battery, which requires optimal temperature storage and operation to ensure the

proper functioning of your battery, is not covered by this warranty.

2. Any battery that has been tampered with or used for commercial purposes.

3. Damage caused by misuse, abuse, or negligent handling, or damage due to mishandling in transit.

4. Consequential and incidental damages.

5. Defects caused by or resulting from damages from shipping or repairs, service, or alteration to the product or

any of its parts which have been performed by a repair person not authorized by SharkNinja.

6. Products purchased, used or operated outside of North America.

Problems with your battery

If your battery fails to operate properly while in use under normal household conditions within the warranty

period, visit sharkclean.com/support for product care/maintenance self-help. Our Customer Service and product

specialists are also available at 800-798-7398 to assist with product support and warranty service options.

SharkNinja will cover the cost for the customer to send in the battery to us for replacement. A fee of $19.95 for

return shipping costs will be charged at the time of return shipment of the replacement battery. Shipping fee is

subject to change.

How to initiate a warranty claim

You can call 800-798-7398 to have a Customer Care specialist assist you. Please note, you must call

800-798-7398 to initiate a warranty claim. Return and packing instruction information will be provided at

that time.

Replacement batteries are available for purchase at sharkclean.com/batteries.

How state law applies

This warranty gives you speciﬁc legal rights, and you also may have other rights that vary from state to

state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the

above may not apply to you.

TWO (2) YEAR LIMITED BATTERY WARRANTY

sharkclean.com

BATTERY REMOVAL AND DISPOSAL

This product uses a lithium-ion rechargeable and recyclable battery. When the battery no longer holds a

charge, it should be removed from the vacuum and recycled. DO NOT incinerate or compost the battery.

When your lithium-ion battery needs to be replaced, dispose of it or recycle it in accordance with local

ordinances or regulations. In some areas, it is illegal to place spent lithium-ion batteries in the trash or in a

municipal solid waste stream. Return spent battery to an authorized recycling center or to retailer for recycling.

Contact your local recycling center for information on where to drop o the spentbattery.

The RBRC™ (Rechargeable Battery Recycling Corporation) seal on the lithium-ion battery indicates that the

costs to recycle the battery at the end of its useful life have already been paid by SharkNinja. In some areas,

it is illegal to place spent lithium-ion batteries in the trash or municipal solid waste stream and the RBRC

program provides an environmentally conscious alternative.

RBRC, in cooperation with SharkNinja and other battery users, has established programs in the United

States and Canada to facilitate the collection of spent lithium-ion batteries. Help protect our environment

and conserve natural resources by returning the spent lithium-ion battery to an authorized SharkNinja

service center or to your local retailer for recycling. You may also contact your local recycling center for

information on where to drop o the spent battery, or call 1-800-798-7398.

TECHNICAL SPECIFICATIONS

Voltage: 28.8V

Watts: 260W

Amps: 9A

TIP: You can ﬁnd the model and serial

numbers on the QR code label which is

located on the bottom of the back of the

vacuum pod and battery.

RECORD THIS INFORMATION

Model Number: ________________________

Date Code: ____________________________

Date of Purchase: ______________________

(Keep receipt)

Store of Purchase: ______________________

REGISTER YOUR PURCHASE

registeryourshark.com

1-800-798-7398

sharkclean.com

LA BUSE DE PLANCHER DUOCLEANMC, LE

TUBE ET LA POIGNÉE CONTIENNENT DES

CONNEXIONS ÉLECTRIQUES:

1. Votre aspirateur est composé d’une buse

motorisée, d’un tube, d’un tuyau et d’un

réceptacle. Ces composantes comportent

des raccordements électriques, du ﬁlage

électrique et des pièces amovibles

pouvant exposer l’utilisateur à certains

risques.

2. Avant chaque utilisation, inspectez

soigneusement toutes les pièces aﬁn de

déceler tout dommage. Si une pièce est

endommagée, cessez l’utilisation.

3. Utilisez uniquement des pièces de

rechange identiques.

4. Cet aspirateur ne renferme aucune pièce

qui peut être réparée.

5. Utilisez cet appareil uniquement aux ﬁns

décrites dans ce manuel. N’UTILISEZ PAS

l’aspirateur pour un usage autre que ceux

décrits dans le présent manuel.

6. À l’exception des ﬁltres, N’EXPOSEZ

AUCUNE des pièces à l’eau ou à d’autres

liquides.

EMPLOI GÉNÉRAL

7. Cet aspirateur N’EST PAS prévu pour

être utilisé par des personnes ayant

des capacités physiques, sensorielles

ou mentales réduites ou manquant

d’expérience et de connaissances, à moins

qu’elles ne soient supervisées ou n'aient

été instruites concernant l’utilisation de

l’appareil par une personne responsable

de leur sécurité. Les enfants doivent être

surveillés aﬁn qu’ils NE PUISSENT PAS

jouer avec cet aspirateur.

8. Éteignez toujours l’aspirateur avant de

brancher ou de débrancher un tuyau

porteur de courant, une buse motorisée,

un chargeur, une batterie ou toute autre

pièce mécanique ou électrique.

9. NE MANIPULEZ PAS la ﬁche ou

l’aspirateur avec les mains mouillées.

10. N’UTILISEZ PAS l’appareil sans que le

récipient à poussière, les ﬁltres et les

brosses rotatives ne soient bien en place.

11. Utilisez uniquement des ﬁltres et des

accessoires de marque Shark. Sinon, la

garantie sera annulée.

12. ÉVITEZ d’insérer des objets dans les

ouvertures de la buse ou de tout autre

accessoire. N’UTILISEZ PAS l’appareil si

une ouverture est obstruée. Veillez à ce

que les ouvertures ne soient pas bloquées

par de la poussière, de la peluche, des

cheveux ou tout autre élément qui

pourrait gêner la circulation de l’air.

13. N’UTILISEZ PAS l’appareil si le ﬂux d’air

de la buse ou de l’accessoire est obstrué.

Si la buse de plancher motorisée ou

les conduits d’air deviennent obstrués,

éteignez l’aspirateur et retirez la batterie.

Retirez toute obstruction avant de

remettre la batterie et de rallumer

l’appareil.

14. Tenez la buse et tous les oriﬁces de

l’aspirateur éloignés des cheveux, du

visage, des doigts, des pieds déchaussés

ou des vêtements amples.

15. N’UTILISEZ PAS l’aspirateur s’il ne

fonctionne pas comme prévu, ou s’il a été

échappé sur le sol, endommagé, laissé à

l’extérieur ou immergé dans l’eau.

16. Soyez extrêmement prudent lorsque vous

nettoyez les escaliers.

17. NE LAISSEZ PAS l’aspirateur sans

surveillance pendant qu’il est en marche.

18. Lorsqu’il est en marche, gardez

l’aspirateur en mouvement sur le tapis en

tout temps, aﬁn d’éviter d’endommager

les ﬁbres du tapis.

19. NE PLACEZ PAS l’aspirateur sur des

surfaces instables comme des chaises ou

des tables.

AVERTISSEMENT

Aﬁn de réduire les risques d’incendie, d’électrocution, de blessure ou de dommage matériel:

IMPORTANTES CONSIGNES DE SÉCURITÉ

POUR UN USAGE DOMESTIQUE SEULEMENT • VEUILLEZ LIRE ATTENTIVEMENT LES INSTRUCTIONS

AVANT D’UTILISER L’APPAREIL

Si la ﬁche d’alimentation du chargeur ne s’insère pas à fond dans la prise de courant, inversez

alors le sens de la ﬁche. Si elle ne s’insère toujours pas, communiquez avec un électricien

qualiﬁé. NE FORCEZ PAS pour insérer la ﬁche dans la prise et ne tentez pas de la modiﬁer

pour qu’elle puisse entrer dans celle-ci.

La page charge ...

Shark IC160 Manuel utilisateur

Ce manuel convient également à

Shark IC160 Manuel utilisateur

dans d''autres langues

Documents connexes